共查询到18条相似文献,搜索用时 218 毫秒
1.
基于80C196KC的CO2焊逆变电源数字波控系统 总被引:2,自引:0,他引:2
《机械工程学报》2002,38(2):145-147
论述了基于Intel
80C196KC 16位单片机控制基础之上,采用波形控制的CO2焊逆变电源机系统,包括系统构成、电流波形控制策略、参数设置与显示、送丝及时序控制等.该系统根据CO2焊短路过渡的特点,软件上采用各种灵活措施对CO2焊焊接电流和电压波形进行较为精确的控制.并给出了该系统短路过渡CO2焊焊接电流电压波形.试验结果表明本CO2焊逆变电源数字控制系统具有良好的控制性能,而且结构简单和容易操作. 相似文献
2.
3.
自组织模糊控制CO2弧焊逆变电源 总被引:1,自引:0,他引:1
余蔚 《机电产品开发与创新》2003,(2):38-40
本文介绍了一种新型CO2弧焊逆变电源。本电源从电弧物理过程出发,运用表面张力过渡理论控制焊接电流波形以减少CO2焊接时的飞溅。根据自组织模糊控制的基本原理设计了一种模糊控制器,用于实现表面张力过渡焊的电压电流波形。在进行短路过渡CO2焊接时能明显减少飞溅,同时改善焊缝成型。 相似文献
4.
5.
6.
7.
8.
随着逆变焊机的发展和数字技术的应用,逆变CO2气体保护焊电源可通过调节焊接电源输出的电流与电压来控制熔滴过渡,改善焊缝成形,降低飞溅.根据熔滴过渡不同阶段的要求产生电流与电压控制信号,进行波形控制可实现调节短路电流上升速度,以减小短路峰值电流,降低短路爆炸能量;减少瞬时短路的次数;通过短路后期液桥颈缩电压上升率切断短路电流,消除电爆炸能量.以此有效减少CO2气体保护焊短路过渡产生的飞溅量,为低飞溅CO2气体保护焊的设计与实现提供有力保证. 相似文献
9.
10.
11.
12.
WU Kaiyuan HUANG Shisheng WU Shuifeng LI Xinglin 《机械工程学报(英文版)》2008,21(6):86-90
A fuzzy logic intelligent control system of pulsed MAG welding inverter based on digital signal processor (DSP) is proposed to obtain the consistency of arc length in pulsed MAG welding. The proposed control system combines the merits of intelligent control with DSP digital control. The fuzzy logic intelligent control system designed is a typical two-input-single-output structure, and regards the error and the change in error of peak arc voltage as two inputs and the background time as single output. The fuzzy logic intelligent control system is realized in a look-up table (LUT) method by using MATLAB based fuzzy logic toolbox, and the implement of LUT method based on DSP is also discussed. The pulsed MAG welding experimental results demonstrate that the developed fuzzy logic intelligent control system based on DSP has strong arc length controlling ability to accomplish the stable pulsed MAG welding process and controls pulsed MAG welding inverter digitally and intelligently. 相似文献
13.
基于数字信号处理器的双丝高速焊数字化协同控制系统 总被引:1,自引:0,他引:1
为解决双丝高速焊两路脉冲同步、交替、随机三种输出形式的协同控制问题,采用数字信号处理器(Digital signal processor, DSP) 建立了基于DSP的双丝高速焊数字化协同控制系统。利用DSP内部集成的脉宽调制 (Pulse width modulation, PWM) 模块,以软件方式实现了主、从机两台逆变电源PWM信号的直接数字化控制,从而实现主、从机的高频逆变和低频脉冲波形调制。利用单一DSP芯片实现了双丝高速焊同步、交替、随机三种脉冲相位输出形式。阐述数字化协同控制系统的软硬件设计。双丝高速焊试验结果表明,所设计的数字化协同控制系统满足设计要求,焊接过程稳定、焊接速度快、飞溅小、焊缝成型美观,能实现良好的双丝高速焊工艺。 相似文献
14.
15.
针对短路过渡CO2气体保护焊在焊丝伸出长度变化较大时,焊接电弧稳定性差,易导致焊接过程中断和焊缝成形不良的问题,采用一种以ADI公司的ADSP2181数字信号处理器为核心,设计具有全数字控制特点的CO2焊短路过渡模糊控制系统.模糊控制系统由模糊控制器和波形控制参数在线调整两部分组成,模糊控制器主要是调节送丝速度,而后以送丝速度为依据,通过波形控制参数在线调整包括焊接电源输出电压在内的短路过渡波形控制参数.试验证明,模糊控制系统通过在线焊接平均电流检测与计算,自动调整送丝速度和波形控制参数,增强了焊接过程中焊丝伸出长度变化时焊接电弧的稳定性,提高了短路过渡CO2焊丝伸出长度的适应范围,焊丝伸出长度的变化在8~45 mm的范围内均可获得良好的焊缝成形. 相似文献
16.
ZENG Min CHEN Xiaohong CAO Biao 《机械工程学报(英文版)》2009,22(3):390-394
In order to overcome many limitations of the conventional power supplies, such as ponderosity, big wastage, and simplex output characteristic, a dual-inverter power supply is designed to meet the different requirements of micro-arc oxidation. The main circuit structure and principle of the dual-inverter power supply for micro-arc oxidation is described, the control system and the control adjustment method are also introduced. The dual-inverter technology is adopted in micro-arc oxidation power supply. The limited bipolar control mode is applied in the power inverter circuit for adjusting the voltage, and various voltage waveform can be obtained by controlling the chopper circuit. Meanwhile, the control accuracy and response speed are improved greatly because of the higher inverter frequency. The power supply can output direct current(DC) waveform, DC pulse waveform, symmetry alternating current(AC) waveform, asymmetry AC waveform, and so on. Besides, the parameters such as pulse width, range, frequency, duty cycle can be adjusted. The experimental result shows that the power supply has many advantages, such as stable output, wonderful waveform consistency and obvious advantage in technique, and it can meet the requirements of micro-arc oxidation process fully. 相似文献
17.
18.
文中采用数字信号处理器TMS320LF2407构建共享外部存储器的双DSP并行控制系统,将其用于控制基于2套桥式逆变直流主回路并联调制模式的新型大功率超音频直流脉冲TIG焊电源.所研制的并行控制系统实现了焊接电源2套主回路双端PWM控制的冗余备份输出,同时也实现了2套主回路恒流反馈控制系统的并行采样、并行滤波及数字PID反馈控制算法的并行运算.焊接试验的超音频直流脉冲电流输出特性验证了DSP并行全数字控制系统的有效性. 相似文献