β-Phase Morphology in Ordered Poly(9,9-dioctylfluorene) Nanopillars by Template Wetting Method

An efficient method based in template wetting is applied for fabrication of ordered Poly(9,9-dioctylfluorene) (PFO) nanopillars with β-phase morphology. In this process, nanoporous alumina obtained by anodization process is used as template. PFO nanostructures are prepared under ambient conditions via infiltration of the polymeric solution into the pores of the alumina with an average pore diameter of 225 nm and a pore depth of 500 nm. The geometric features of the resulting structures are characterized with environmental scanning electron microscopy (ESEM), luminescence fluorimeter (PL) and micro μ-X-ray diffractometer (μ-XRD). The characterization demonstrates the β-phase of the PFO in the nanopillars fabricated. Furthermore, the PFO nanopillars are characterized by Raman spectroscopy to study the polymer conformation. These ordered nanostructures can be used in optoelectronic applications such as polymer light-emitting diodes, sensors and organic solar cells.     

Controlling the morphological,structural, and optical properties of one-dimensional PCDTBT nanotubes by template wetting

In this study, the synthesis of poly [N-9′-heptadecanyl-2, 7-carbazole-alt-5, 5-(4′, 7′-di-2-thienyl-2′, 1′, 3′-benzothiadiazole)] (PCDTBT) nanotubes via a templating method is reported. PCDTBT nanotubes were successfully grown by immersing the porous alumina template into 15 mg/ml of solution concentration for 2- and 24-h periods and annealed at 50°C. Changes in morphological and optical properties between nanotubes of different infiltration times (2 and 24 h) as well as its thin films are observed. The longer infiltration time of 24 h produced nanotubes with enhanced morphological, structural, and optical properties. Nanotubes that are formed between 2 and 24 h of infiltration show enhancement in absorption, photoluminescence, and shift in Raman peak if compared to their thin films.     

Fluorescence turn‐on chemical sensor based on water‐soluble conjugated polymer/single‐walled carbon nanotube composite

A chemical sensor for methyl viologen (MV²⁺), based on a water‐soluble conjugated polymer/single‐walled carbon‐nanotube (SWNT) composite, was fabricated. Water‐soluble poly(m‐phenylene ethynylene) with sulfonic acid side‐chain groups (mPPE‐SO₃) was synthesized via a Pd‐catalyzed Sonogashira coupling reaction and used to prepare a highly stable mPPE‐SO₃/SWNT composite with strong π–π interactions in water. The relationship between the optical properties and sensing capability of the mPPE‐SO₃/SWNT composite in aqueous solution was investigated. The addition of MV²⁺ enhanced the fluorescence intensity of the mPPE‐SO₃/SWNT composite by inducing a conformational change of the polymer from a helical to a random‐coil structure. The water‐soluble mPPE‐SO₃/SWNT composite enabled highly sensitive fluorescence detection of MV²⁺ in aqueous solutions with no precipitation resulting from reaggregation of the SWNTs. This mPPE‐SO₃/SWNT composite sensor system is therefore an effective turn‐on chemical sensor for MV²⁺. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43301.     

Investigation of a Mesoporous Silicon Based Ferromagnetic Nanocomposite

A semiconductor/metal nanocomposite is composed of a porosified silicon wafer and embedded ferromagnetic nanostructures. The obtained hybrid system possesses the electronic properties of silicon together with the magnetic properties of the incorporated ferromagnetic metal. On the one hand, a transition metal is electrochemically deposited from a metal salt solution into the nanostructured silicon skeleton, on the other hand magnetic particles of a few nanometres in size, fabricated in solution, are incorporated by immersion. The electrochemically deposited nanostructures can be tuned in size, shape and their spatial distribution by the process parameters, and thus specimens with desired ferromagnetic properties can be fabricated. Using magnetite nanoparticles for infiltration into porous silicon is of interest not only because of the magnetic properties of the composite material due to the possible modification of the ferromagnetic/superparamagnetic transition but also because of the biocompatibility of the system caused by the low toxicity of both materials. Thus, it is a promising candidate for biomedical applications as drug delivery or biomedical targeting.     

Polyaniline self‐assembled with DTPA: Facilely tuned morphology and properties

The effects of pH profile and “soft template” during aniline chemical oxidative polymerization (COP) were investigated and evaluated simultaneously with diethylene triamine pentaacetic acid (DTPA) as a structural directing agent. Formation of PANI nanotubes and nanoparticles, smooth microspheres, and urchin‐like microspheres were illustrated by evaluating the pH profile during aniline COP while considering the “soft template” effects of DTPA. PANI nanosheets with two semicurled edges were found in the system producing nanotubes, which provides an evidence for the “curling mechanism” of PANI nanotube formation. With different pH profiles, chemical structures and aggregation structures of the as‐synthesized PANI micro/nanostructures are similar, whereas their conductivity, wettability, Cr (VI) adsorption, and electrochemical behaviors are distinct. The present study indicates that if properly conducted, pH profile adjustment is more effective than “soft template” to control the morphology and to optimize the performance of PANI micro/nanostructures. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42403.     

Electrospun poly(vinyl alcohol) composite nanofibers with halloysite nanotubes for the sustained release of sodium d‐pantothenate

Poly(vinyl alcohol) (PVA) nanofibers containing halloysite nanotubes (HNTs) loaded with sodium d ‐pantothenate (SDP) were successfully fabricated via simple blend‐electrospinning. SDP was efficiently loaded into the innate HNT lumen with an SDP/HNT mass ratio of 1.5:1 via vacuum treatment. The SDP‐loaded HNT‐inclusion complex was evaluated with drug‐loading efficiency testing, Fourier transform infrared (FTIR) spectroscopy, and X‐ray diffraction. The morphologies of the nanofibers were observed by scanning electron microscopy, which revealed uniform and smooth surfaces of the nanofibers. The addition of HNTs to the composite nanofibers increased the viscosity of the polymer solution, and this suggested shorter fiber diameters. FTIR spectroscopy verified the good compatibility of the SDP and HNTs with PVA. Moreover, the swelling properties were found to quantitatively correlate with weight loss. In vitro drug‐release testing revealed that the HNTs and crosslinking reaction most dramatically affected the sustained release of SDP from the PVA and SDP‐loaded HNT complex. In the drug‐release kinetics model, SDP release depended on the diffusion caused by the deformation of the polymer‐based structures in the medium; it followed Fickian diffusion with acceptable coefficient of determination (r²) values between 0.88 and 0.94. Most importantly, the HNTs as natural biocontainers effectively modulated the release profile by loading the active compound in harmony with the electrospun nanofibers. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 42900.     

模板法组装尼龙-66/铂同轴纳米电缆的研究

采用简单的溶液浸润多孔氧化铝模板的方法制备了PA66的纳米管,再以这种含有PA66纳米管的模板作为“二次模板”,通过电化学沉积技术,在聚合物纳米管内部沉积金属铂纳米线,制得了PA66/铂同轴纳米电缆。用SEM和TEM等测试手段对所制备的聚合物纳米管和同轴纳米电缆进行了表征。     

A highly oriented poly(3,4‐ethylenedioxythiophene) film: Facile synthesis and application for supercapacitor

A single crystal poly(3,4‐ethylenedioxythiophene) (PEDOT) film with highly oriented arrangement has been fabricated from an aqueous solution by a novel unipolar pulse electropolymerization method. Film formation mechanism was proposed based on the in situ mass change during electropolymerization process measured by the electrochemical quartz crystal microbalance. The compositions, morphology and crystal structure of the fabricated films are characterized by Fourier transfer infrared spectroscopy, scanning electron microscopy, and X‐ray diffraction, respectively. It is found that the prepared PEDOT film on carbon nanotubes (CNTs)‐modified electrode with a spongy dendritic structure possesses outstanding electroactivity, high specific capacitances (239.1 F?g^?1, including the specific capacitances of CNTs which is 21.4 F?g^?1), and excellent cycling stability with 7.3% decay from its initial capacitance over 10,000 cycles. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43418.     

Optical sensor based on fluorescent PMMA/PFO electrospun nanofibers for monitoring volatile organic compounds

The development of polymeric materials with superior electrical and/or optical properties is highly demanded for designing optical gas sensors, where conjugated polymers play an important role due to their π‐electron conjugation. However, usually the low processability and high cost of these materials hinder technological applications. Here we report on a simple route to develop highly fluorescent electrospun nanofibers of poly(methyl methacrylate) (PMMA) containing low contents of polyfluorene (PFO). The PMMA_PFO nanofibers were characterized by scanning electron microscopy, Fourier transform infrared spectroscopy, and thermogravimetric analysis, while the luminescence properties changes were evaluated by exposing the PMMA_PFO nanofibers to distinct volatile organic compounds (VOCs) including ethanol, toluene, tetrahydrofuran, acetone, dichloromethane, and chloroform. The changes in luminescence properties, specifically fluorescence quenching, of PMMA_PFO nanofibers were analyzed in terms of conformational changes from glassy‐phase to β‐phase of PFO when the nanofibers were exposed to the VOCs. The developed nanostructured platform showed a suitable response to detect chloroform, with linear responses in the concentration range from 10 to 300 ppm and from 350 to 500 ppm and limits of detection of 47.9 and 15.4 ppm, respectively. The results suggest the PMMA_PFO electrospun nanofibers are highly potential materials for optical gas sensor applications based on luminescence quenching. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46128.     

Electrochemical synthesis of nickel hexacyanoferrate nanoarrays with dots, rods and nanotubes morphology using a porous alumina template

Transition metal hexacyanoferrate (MeHCF) have attracted extensive attention because of their outstanding properties including, electrocatalysis, molecular magnetism, biosensing and ion-exchange. This paper describes an approach for fabrication of ordered nanoarrays of Ni hexacyanoferrate (NiHCF) structures with different morphologies such as dots, rods and tubes in order to advance their properties and applications. The method is based on the conversion of Ni into NiHCF nanostructures by electrochemical oxidation in the presence of hexacyanoferrate ions, using nanoporous anodic alumina oxide (AAO) as a template. The structure and morphology of formed Ni and NiHCF nanoarrays were confirmed by scanning electron microscopy (SEM), showing agreement with the pore structures of the AAO template. The electrocatalytic activity of NiHCF nanorod array electrodes showed high catalytic properties for the detection of hydrogen peroxide and the potential to be used as a platform for direct biosensing applications. The ion-exchange ability of fabricated NiHCF nanostructures (nanorods and nanotubes) toward alkali cations such as Na⁺ has been successfully confirmed.     

Physical and antibacterial properties of polyvinyl alcohol films reinforced with quaternized cellulose

Hydroxypropyltrimethylammonium chloride cellulose (CM) was homogeneously synthesized in a NaOH/urea aqueous solution. CM was blended in a polyvinyl alcohol (PVA) matrix to produce composite films via co‐regeneration from the alkaline solution. The PVA film and the blend films were characterized by Fourier transform infrared spectroscopy, X‐ray diffraction measurements and scanning electron microscopy. The mechanical properties, water swelling ratio, hydrophobicity, light transmission, and antibacterial activity against Staphylococcus aureus and Escherichia coli were also evaluated. The results showed that CM could interact with PVA by hydrogen bonding and exhibit an obvious reinforcement effect. The addition of CM improved the surface roughness, hydrophobicity and water swelling ratio, especially, the antibacterial activity. However, compared with neat PVA film, the elasticity and optical transmission decreased. The increased tensile strength, powerful antibacterial activity, and medium light transmission indicate that the biocompatible blend film will become an exceptional alternative in functional bio‐material field. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43552.     

Bio‐Regeneration of Desulfurization Adsorbents by Selected P. delafieldii R‐8 Strains

Abstract

Adsorption properties of different adsorbents such as reduced NiY, AgY, alumina, 13X, and activated carbon were studied with dibenzothiophene (DBT) and naphthalene as model compounds. The desorption of DBT was carried on thermo gravimetric–differential thermal analysis (TG‐DTA). The interaction of DBT with different adsorbents follows the sequence: activated carbon > reduced NiY > AgY > activated alumina > 13X. The bio‐regeneration of these adsorbents was studied with P. delafieldii R‐8 as desulfurization strains. Adding P. delafieldii R‐8 cells can improve DBT desorption from adsorbent AgY. The desorption of DBT from adsorbents by bio‐regeneration of adsorbents follows the sequence: 13X > alumina > AgY > reduced NiY>activated carbon. The presence of naphthalene can decrease the desorption of sulfur compounds. The adsorption capacity of AgY decreases for the first time recycling and then changes little. The decrease of the adsorption capacity is due to the loss of Ag⁺ ions.     

Fabrication and characterization of hybrid films based on polyaniline and graphitic carbon nitride nanosheet

Hybrid films of polyaniline/graphitic carbon nitride (PANI/g‐C₃N₄) deposited on titanium was fabricated. First, g‐C₃N₄ as a two‐dimensional graphite‐like structure was synthesized by the stepwise condensation reaction of melamine and cyanuric chloride in the presence of N,N‐dimethylmethanamide as a high boiling point nonnucleophilic base. Then composite films of PANI/g‐C₃N₄ were prepared by in situ electrochemical polymerization of an aniline solution containing g‐C₃N₄. Different concentrations of g‐C₃N₄ were utilized to improve the electrochemical performances of the hybrids. The resulting PANI/g‐C₃N₄ composite films were characterized by X‐ray diffraction, field emission scanning electron microscopy, transmission electron microscopy, Fourier transform infrared spectroscopy, and ultraviolet–visible diffuse reflection spectroscopy techniques. The electrochemical performance of the composites was evaluated by cyclic voltammetry (CV). Application of the prepared samples has been evaluated as supercapacitor material in 0.5 M H₂SO₄ solution using CV technique. The specific capacitances of PANI/g‐C₃N₄ composite films were higher than obtained for pure PANI films. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 44059.     

Electrochemical activity and microscopy of electrosynthesised poly(o-phenylenediamine) nanotubes

Poly(o-phenylenediamine) (PoPD) nanotube electrodes were obtained by templated electropolymerization employing anodic porous alumina membrane. Infrared Spectroscopy measurements confirmed the polymerization of oPD into the alumina templates. The electrochemical activity of the PoPD nanotube electrodes were assessed by cyclic voltammetry (CV) as a function of monomer concentration. The morphology of the obtained nanostructures was assessed by scanning electron microscopy measurements. The results showed that poly(o-phenylenediamine) nanotube arrays have uniform diameter and they match the aspect ratio of the anodic porous membrane used for the synthesis. A high filling factor of the polymer within the alumina template was also revealed. The CV studies showed that the electrochemical properties of the PoPD nanotubes are greatly influenced by the monomer concentration in the synthesis electrolyte.     

Investigation of CNT modification of epoxy resin in CFRP strengthening systems

The use of carbon fiber‐reinforced polymers (CFRPs) to reinforce old structures has become popular in recent years. In this study, the chemical structure of the epoxy resin used as the bonding agent in the CFRP strengthening system was modified by dispersing multi‐walled carbon nanotubes (MWCNTs) in order to improve the performance of the strengthening system. Composites were fabricated with different mixing orders employing the solvent‐assisted dispersion method and ultrasonic mixing. Thermogravimetric analysis, dynamic mechanical analysis, and tensile tests were conducted to investigate the effect of CNT dispersion and fabrication method on the thermal and mechanical properties of epoxy composite. In addition, the temperature‐dependent tensile behavior of fabricated composites was studied by performing tensile tests at elevated temperatures. The morphology of CNT/epoxy composites was characterized using scanning electron microscopy (SEM). Fourier transform infrared (FTIR) was also used to show the influence of solvent on the molecular structure of composites. Based on the experimental results, the decomposition temperature of the epoxy resin was heightened by 15°C as a result of solvent‐assisted dispersion of nanotubes. However, the glass transition temperature (T_g) was slightly reduced due to the solvent effect. FTIR analysis revealed that the solvent negatively affects the curing process of epoxy composite. A considerable enhancement was recorded in the tensile properties as a result of CNT infusion. This was attributed to the homogeneous dispersion of nanotubes which was shown by SEM images. Using solvent to disperse nanotubes led to the reduction of tensile strength of the epoxy composite at elevated temperature due to the lower T_g. POLYM. COMPOS. 37:1021–1033, 2016. © 2014 Society of Plastics Engineers     

Synthesis and characterization of poly(3,4‐ethylenedioxythiophene)/poly(lactic acid) nanofibres by electrospinning

The poly(3,4‐ethylenedioxythiophene) (PEDOT) family of polymers is a technologically important class of conducting polymers showing high stability, medium band gap, low redox potential and high optical transparency in the electrically conductive state. While PEDOT nanotubes and nanofibres have been synthesized electrochemically, significant opportunity exists for developing a convenient chemical synthetic route for the bulk synthesis of nanostructured PEDOT for potential use in the design of next‐generation nano‐electronic circuits and field emission devices. In this paper, chemical oxidative polymerization was used to synthesize PEDOT nanoparticles. These nanoparticles were co‐electrospun with poly(l ‐lactic acid) from a solution in acetone and N,N‐dimethylformamide. The PEDOT particles were analysed using attenuated total reflectance–Fourier transform infrared spectroscopy and particle size distribution using dynamic light scattering. The synthesized nanofibre mats were studied using differential scanning calorimetry and scanning electron microscopy, and conductivity was measured using a two‐probe conductivity tester. © 2016 Society of Chemical Industry     

Cellulose acetate ultrafiltration membranes reinforced by cellulose nanocrystals: Preparation and characterization

Cellulose nanocrystals (CNCs) were used as a sustainable additive to improve the hydrophilicity, permeability, antifouling, and mechanical properties of blend membranes. Different CNC loadings (0–1.2 wt %) in cellulose acetate (CA) membranes were studied. The blend membranes were prepared by a phase‐inversion process, and their chemical structure and morphological properties were characterized by attenuated total reflectance–Fourier transform infrared spectroscopy, scanning electron microscopy, porosity, and mean pore size and contact angle measurement. The blend membranes became more porous and more interconnected after the addition of CNCs. The thickness of the top layer decreased and a few large holes in the porous substrate appeared with increasing CNC loading. In comparison with the pure CA membranes, the pure water flux of the blend membranes increased with increasing CNC loading. It reaches a maximum value of 76 L m^?2 h^?1 when the CNC loading was 0.5 wt %. The antifouling properties of the CA membrane were significantly improved after the addition of CNCs, and the flux recovery ratio value increased to 68% with the addition of 0.5 wt % CNCs. In comparison with that of the pure CA membranes, the tensile strength of the composite membranes increased by 47%. This study demonstrated the importance of using sustainable CNCs to achieve great improvements in the physical and chemical performance of CA ultrafiltration membranes and provided an efficient method for preparing high‐performance membranes. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43946.     

PLA/functionalized‐gum arabic based bionanocomposite films for high gas barrier applications

The present work focuses on the microwave synthesis of lactic acid‐grafted‐gum arabic (LA‐g‐GA) by polycondensation reaction and its influence as an additive to improve the gas barrier properties of poly(lactic acid) (PLA) films, prepared by solution casting method. It is observed that during the synthesis of LA‐g‐GA, hydrophilic gum is converted into hydrophobic due to grafting of in situ grown hydrophobic oligo‐(lactic acid). Subsequently, PLA/LA‐g‐GA bionanocomposite films are fabricated and characterized for structural, thermal, mechanical and gas barrier properties. Path breaking reduction in oxygen permeability (OP) of ～10 folds is achieved in case of PLA films containing LA‐g‐GA as filler. However, water vapor transmission rate (WVTR) is reduced up to 27% after 5 wt % addition of filler. Reduction in OP of this order of magnitude enables the PLA to compete with PET in term of enhancing shelf life and maintaining the food quality. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43458.     

Styrene‐butadiene‐styrene copolymer compatibilized interfacial modified multiwalled carbon nanotubes with mechanical and piezoresistive properties

In this study, styrene‐butadiene‐styrene tri‐block copolymer/multiwalled carbon nanotubes (SBS/MWNTs) were prepared by means of a solution blending method. To enhance the compatibility between SBS and MWNTs, the SBS grafted MWNTs (SBS‐g‐MWNTs) were used to replace MWNTs. The MWNTs were chemically hydroxylated by the dissolved KOH solution with ethanol as solvent and then reacted with 3‐Aminopropyltriethoxysilane (APTES) to functionalize them with amino groups (MWNT‐NH₂). The SBS‐g‐MWNTs were finally obtained by the reaction of MWNT‐NH₂ and maleic anhydride grafted SBS (MAH‐g‐SBS). The SBS‐g‐MWNTs were characterized by X‐ray photoelectron spectroscopy (XPS), Fourier transform‐infrared spectroscopy (FT‐IR), transmission electron microscopy (TEM), scanning electron microscope (SEM), and thermogravimetric analysis (TGA). The results showed that the SBS molecules were homogeneously bonded onto the surface of the MWNTs, leading to an improvement of the mechanical and electrical properties of SBS/SBS‐g‐MWNTs composites due to the excellent interfacial adhesion and dispersion of SBS‐g‐MWNTs in SBS. A series of continuous tests were carried out to explore the electrical‐mechanical properties of the SBS/SBS‐g‐MWNTs composites. We found out that, near the percolation threshold, the well‐dispersed SBS/SBS‐g‐MWNTs composites showed good piezoresistive characteristics and small mechanical destructions for the development of little deformation under vertical pressure. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 42945.     

Facile preparation and separation performances of cellulose nanofibrous membranes

Ultrafiltration (UF) is a size selective pressure‐driven membrane separation process increasingly required for high efficient water treatment and suspended solids removal in many industrial applications. This study examined the morphology of as‐prepared cellulose nanofibers and then utilized the nanofibers dispersion to fabricate nanofibrous nanoporous membranes with potential wide applications in various fields including water treatment. The nanofibers were prepared using a simple and powerful mechanical high intensity ultrasonication following a pre‐chemical treatment of α‐cellulose. The cellulose nanofibers’ morphology, crystallinity, and yield were found to be influenced by pre‐chemical treatment. Cellulose nanofibrous membranes were fabricated from cellulose nanofibers dispersion on a porous support. A nanoporous structure with an extensive interconnected network of fine cellulose nanofibers was formed on the support substrate. The resulting membranes exhibited typical and high‐efficient UF performances with high water fluxes of up to 2.75 10³ L/m²/h/bar. The membranes also displayed high rejections for ferritin and 10 nm gold nanoparticles with a reactive surface area capable of rapidly decolorizing methylene blue from its aqueous solution. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43544.