有机电致发光器件的动态电学特性

利用交流阻抗谱技术，研究了有机发光二极管ITO/Alq₃(90 nm)/Al的载流子传导机理.根据器件对不同频率的响应曲线及其等效电路模型，该器件可看作是由并联的电阻R_p和电容C_p再与电阻R_s串联而成，并根据实验数据求出了R_p，C_p和R_s的数值.实验结果表明器件的载流子传输机理属于指数分布式的陷阱电荷限制电流，其介电弛豫时间随偏压的增加而逐渐减小. 关键词： 3')" href="#">Alq₃ 陷阱电荷限制电流 交流阻抗谱 有机发光二极管     

聚合物发光二极管中的负电容效应

采用交流阻抗谱技术,研究了以共轭聚合物(poly［2-methoxy,5-(2′-ethylhexoxy)-1,4-phenylenevinylene］)(MEH-PPV)为发光层,以带有胺基的聚芴共聚物poly［(9,9-bis(3′-(N,N-dimethylamino)propyl)-2,7-fluorene)-alt-2,7-(9,9-dioctylfluorene)］ (PF-NR₂)为电子传输层的发光二极管的交流响应特性. 对于结构为ITO/P 关键词： 2')" href="#">PF-NR₂ 聚合物发光二极管 交流阻抗谱 负电容效应     

掺杂CuPc的MEH-PPV/PCBM有机太阳电池研究

采用旋涂法制备了掺杂铜酞菁(CuPc)的聚(2-甲氧基,5-(2-乙基-乙氧基)-对苯乙炔)(MEH-PPV)/ 富勒烯衍生物(PCBM)有机太阳电池. 测试结果表明:掺杂15% CuPc的MEH-PPV/PCBM太阳电池效率(1.41%)比标准的MEH-PPV/PCBM太阳电池(1.26%)提高12%. 器件的吸收谱和迁移率测试表明CuPc导致的吸收谱增强和迁移率提高是器件效率提高的主要原因. 关键词： 有机太阳电池 CuPc掺杂 MEH-PPV/PCBM器件     

PBD分子对聚合物发光二极管特性的影响

研究了由聚合物发光材料poly(2-methoxy,5-(2-ethy lhexyloxy)-1,4-phenyleneviny lene)(MEH-PPV)掺杂2-(4-biphenyl)-5-(4-tert-butylphenyl)-1,3,4-oxadiazole(PBD)制成的发光层厚度为80,170nm的高分子发光器件(PLEDs)。研究了PBD不同掺杂浓度时器件的电流密度-电压(J-V)和亮度-效率-电压(L-E-V)特性,发现PBD除传输电子外,还阻挡空穴的注入和传输。研究发现,PBD的最优掺杂浓度为20%,掺入PBD后MEH-PPV的EL光谱红移且发生窄化,当PBD掺杂浓度为40%时MEH-PPV的EL光谱窄化最明显,EL光谱半峰全宽从100nm减小到44nm。     

发光二极管可靠性的噪声表征

通过对发光二极管内部结构的研究，发现N_t(界面态陷阱密度)和扩散电流比率 是影响发光二极管性能的重要因素，并与器件可靠性有密切关系.器件内部存在的多种噪声 中，低频1/f噪声可表征N_t和扩散电流比率.在深入研究发光二极管工作原理及1 /f噪声载流子数涨落理论和迁移率涨落理论的基础上，建立了发光二极管的电性能模型及1/ f噪声模型.在输入电流宽范围变化的条件下测量了器件的电学噪声，实验结果与理论模型符 合良好.通过对其测量结果分析，深入研究了噪声和发光二极管性能与可靠性的关系，证明 了噪声幅值越大，电流指数越接近于2，器件可靠性越差，失效率则显著增大. 关键词： 1/f噪声 发光二极管 陷阱 光功率     

载流子复合及能量无序对聚合物太阳电池开路电压的影响

聚合物太阳电池中载流子的复合与能量无序对器件的开路电压有着深刻的影响.本文同时研究了基于传统富勒烯(PC71BM)和非富勒烯(O-IDTBR)电子受体的聚合物太阳电池.通过交流阻抗谱、低温电流密度-电压谱、瞬态光电压以及电致发光光谱等手段重点研究了载流子复合及能量无序对电池器件开路电压的影响.具体地,交流阻抗谱和瞬态光电压测试结果表明,富勒烯体系载流子复合损失较为严重.电致发光光谱研究显示,PC71BM器件的发光峰随着注入电流的增加不断向短波长处移动,而O-IDTBR体系发光峰位置基本不变,该结果证明PC71BM体系中能量无序度更高.载流子复合严重及能量无序度更高共同作用导致了富勒烯器件开路电压的降低.     

有机薄膜晶体管驱动聚合物发光二极管研究

研究了有机薄膜晶体管(OTFT)与聚合物发光二极管(PLED)集成制备技术和相关物理问题.OTFT结构为栅极钽(Ta)/绝缘层五氧化二钽(Ta2O5)/有源层并五苯(Pentacene)/源漏极金(Au);PLED器件结构为ITO/PEDOT:PEO(polyethylene oxide)/P-PPV或MEH-PPV/Ba/Al.PEDOT:PEO,P-PPV和MEH-PPV薄膜层均采用丝网印刷技术,实现了OTFT与PLED器件集成发光.其中OTFT器件的阈值电压为-7V,迁移率为0.91cm2/(V.s),并通过OTFT驱动得到以P-PPV和MEH-PPV为发光层的PLED器件的发光亮度分别达到124和26cd/m2,电流效率分别为12.4和1.1cd/A.利用丝网印刷技术可以有效控制高分子薄膜的沉积区域,实现功能器件的集成.     

三元共聚物饱和红色电致发光研究

研究了高分子电致发光器件中阳极和阴极对三元共聚物饱和红色发光性能的影响.结果表明 ，在二元共聚基础上，引入空穴载流子传输基团可以改善器件的发光效率，对PFO-5Cz-15DB T三元共聚物,在6.5V电压下，外量子效率达到1.49％，亮度为448cd/m²，EL光 谱峰值位于657nm，色度坐标x＝0.69，y＝0.30. 关键词： 阴极材料 电致发光 发光二极管 聚芴     

典型有机发光二极管中载流子传输和复合模型

提高载流子复合效率是改善有机发光二极管(OLEDs)发光效率的重要方法。采用真空热蒸发成膜法制作了典型双层结构的OLEDs(ITO/TPD/Alq₃/Al)。二极管的性能测试结果表明器件的电流-电压关系与Fow ler-Nordheim场发射载流子注入理论符合得较好。以Fow ler-Nordheim场发射载流子的隧穿注入理论为基础,对OLEDs的电流进行理论分析和数学推导,建立典型双层结构有机发光二极管中载流子传输、复合的理论模型。以此模型为依据,对载流子注入复合进行理论分析,探究载流子注入复合的效率的表达式。在外加电压和器件材料一定下,得出了载流子复合效率与阳极区一侧积累的空穴面密度和阴极区一侧积累的电子面密度的关系表达式。     

一种基于荧光材料的聚合物白光发光二极管

制备了一种基于荧光聚合物共混的单发光层聚合物白光发光二极管.器件结构为铟锡氧化物/苯磺酸掺杂聚乙烯基二氧噻吩/发光层/ 1,3,5-三(N-苯基-2-苯并咪唑-2)苯41/Ba/Al,蓝光材料芴-氟化喹喔啉共聚物(PF-BPFQ5)、绿光材料苯基取代的聚对苯乙炔(P-PPV)和红光材料聚(2-甲氧基-5-(2′-乙基己氧基)-1,4-对苯乙炔)(MEH-PPV)共混为发光层.当PF-BPFQ5,P-PPV,MEH-PPV的质量比例为100∶06∶06时,获得标准的白光,色坐标为（033 关键词： 聚合物发光二极管 白光 共混     

Enhanced Efficiency of Polymer Light-Emitting Diodes by Dispersing Dehydrated Nanotube Titanic Acid in the Hole-buffer Layer

Efficiency of polymer light-emitting diodes (PLEDs) with poly(2-methoxy-5-(2-ethyl hexyloxy)-p-phenylene vinylene) (MEH-PPV) as an emitting layer was improved if a dehydrated nanotubed titanic acid (DNTA) doped hole-buffer layer polyethylene dioxythiophene (PEDOT) was used. Photoluminescence (PL) and Raman spectra indicated a stronger interaction between DNTA and sulfur atom in thiophene of PEDOT, which suppresses the chemical interaction between vinylene of MEH-PPV and thiophene of PEDOT. The interaction decreases the defect states in an interface region to result in enhancement in device efficiency, even though the hole transporting ability of PEDOT was decreased.     

Efficient small molecular and polymer organic devices using bis[2-(4-tert-butylphenyl)benzothiazolato-N,C′] iridium (III) (acetylacetonate) dye as emitter

Small molecular organic light-emitting diodes (MOLED) and polymer organic light-emitting diodes (POLED) were fabricated with yellow light emission phosphorescent dye bis[2-(4-tert-butylphenyl)benzothiazolato-N,C²′] iridium (III) (acetylacetonate) doped in different hosts. The electroluminescent (EL) spectra of both devices shown two peaks generated from iridium dye but the position of main peak changed and became broader for POLED. The maximum luminance of 10,500 cd/m² achieved at 12.5 V for MOLED is higher than maximum luminance of 9996 cd/m² at 20 V for POLED. The maximum power efficiency of small molecular device is 6.4 lm/W, which is higher than 2.3 lm/W of polymer device, but the efficiency of both devices will roll off at large current density.     

不同比例的MEH-PPV与PCBM共混体系光电池性能研究

以MEH-PPV(poly(2-methoxy-5-(2^/-ethylhexoxy)-1,4-phenylene vinylene)为电子给体材料(donor,D), PCBM(1-(3-methoxycarbonyl)-propyl-1-1-phenyl-(6,6)C₆₁)为电子受体材料(acceptor,A),制成了不同比例的共混体系太阳电池.从不同比例的D/A材料共混体系的原子力图、光荧光谱、器件的单电荷传输的暗导J-V图、太阳电池的光敏图及器件双电荷传输的光、暗导J-V图方面,详细分析了不同比例的D/A材料对器件性能影响.得出了当D/A材料比例为1∶4时,器件中活性层能形成良好的互穿网络,光生激子能有效地分离,被分离的电荷能有效地传输,太阳电池的性能最好.其光电池在100mW/cm²强度光照下,其开路电压V_oc为0.8V,短路电流密度J_sc为3.47mA/cm²,填充因子FF为55.9%,能量转换效率η为1.55%. 关键词： 太阳能电池 聚合物 性能     

Star-burst 1H-pyrazolo[3,4-b]quinoline as chromophore for light-emitting diodes and photovoltaic devices

The current–voltage and electroluminescent features of a novel star-burst 1H-pyrazolo[3,4-b]quinoline chromophore show that it has potential applications as a material for light-emitting diodes. The electroluminescence covers the white light spectral range from 420 nm up to 610 nm and achieves maximal value about 18 Cd/m² at biased voltage 23 V. The photovoltaic efficiency achieved was equal to about 0.08%.     

The dependence of the ideality factor on the charge density of a conjugated polymer (MEH-PPV) doped with some laser dyes

Blends made of poly[2-methyl-5-(2-ethyl-hexyloxy)-1,4-phenylene vinylene] (MEH-PPV) conducting polymer and cresyl violet 670 (CV) and coumarin 460 (C₄₆₀) have been utilized for preparation of organic Schottky diodes. The I–V characteristics of these diodes are then determined and interpreted in terms of thermoionic emission (TIE) conduction process. Upon blending MEH-PPV with CV and C₄₆₀ dyes, the conduction is seen to completely be through TIE conduction. The turn on voltage for MEH-PPV diode is found to be 2.0 V and decreases with CV blending in contrast to the blend of MEH-PPV-C₄₆₀. The Schottky parameters are determined where the potential barrier is found to be around 0.75 V which is consistent with reported values. The charge densities of the respective blends are calculated and found to reduce by in MEH-PPV-C₄₆₀ blends while it has been enhanced in the CV samples by an order of magnitude compared that of MEH-PPV. The correlation between the ideality factor with the dielectric constant and the charge density is inspected. It is found that the ratio between the charge density of the polymeric blend and the charge density of the Al-electrode is crucial for obtaining low ideality factor.     

MEH-PPV与TiO2共混体系太阳电池性能分析

以MEH-PPV(poly(2-methoxy-5-(2′-ethylhexoxy)-1,4-phenylene vinylene)为电子给体材料(Donor,D), TiO₂纳米线为电子受体材料(Acceptor,A),制成了共混体系太阳电池. 从D/A材料共混体系的紫外可见吸收光谱(UV-vis)、光荧光谱(PL)、器件的电荷传输的光导J-V图等方面,分析了MEH-PPV∶TiO₂体系器件性能变化的原因. 得出了当在纯MEH-PP 关键词： 太阳电池 聚合物 性能     

Enhanced quantum efficiency in polymer electroluminescence devices by inserting an ultrathin PMMA layer

We report an increase of electroluminescence (EL) efficiency by about two times for poly(2-methoxy-5-(2′-ethylhexyloxy)-1,4-phenylene vinylene) (MEH-PPV) based polymer light-emitting diodes (PLED) while employing an ultrathin layer of poly(methyl methacrylate) (PMMA) between a hole injection layer, polyethylenedioxythiophenne:polystyrenesulfonate (PEDOT:PSS) and an emitting layer, MEH-PPV. The peak power efficiency of the control device (ITO/MEH-PPV/LiF/Al) was 0.42 lm/W with a current efficiency of 0.66 cd/A. The device with the optimized thickness of PMMA interface layer shows the highest power efficiency of 1.15 lm/W at a current efficiency exceeding 1.83 cd/A. The significant improvement in the device performance is attributed to the decrease of holes injection and the promotion of electrons injection, which cause the balance of the carriers within the emitting layer.     

Organic light-emitting diodes based on polyvinylcarbazole films doped with polymer nanoparticles

The optical and electrical properties of light-emitting diode structures with an active layer based on nanocomposite polyvinylcarbazole (PVK) films doped with nanoparticles of another light-emitting polymer, MEH-PPV, have been studied. It has been established that the size of MEH-PPV particles in the PVK matrix is of the order of 100 nm. The spectral range of photoluminescence of such structures can be changed by varying the ratio of PVK to MEH-PPV. The current-voltage characteristics of composite light-emitting diodes based on PVK: MEH-PPV films indicate p-type conductivity. It has been shown that a decrease in the MEH-PPV nanoparticle concentration in the PVK matrix shifts the threshold values of the bias for the onset of electroluminescence toward smaller values and makes the photoluminescence and electroluminescence spectra more similar to the spectrum of the white light-emitting diode. The influence of the form of the polymer and polymer nanoparticles on the mechanisms of injection and transport of charge carriers and the radiative recombination in the studied structures has been discussed.     

InGaN/GaN多量子阱蓝色发光二极管的实验与模拟分析

分别采用量子阱模型和量子点模型对蓝色InGaN/GaN多量子阱发光二极管电学和光学特性进行模拟,并和实验测量结果进行了比对,结果发现,量子点模型的引入,很好地解决了I-V和电致发光二方面的实验与理论模型间符合程度不好的问题.同时,在I-V曲线特性模拟中发现,在量子点理论模型的基础上,只有考虑到载流子的非平衡量子传输效应,才能得到和实验相接近的I-V曲线,揭示着在InGaN/GaN 多量子阱发光二极管电输运特性中,载流子的非 关键词： InGaN/GaN 发光二极管 数值模拟 量子点模型