A Hg(II)-specific probe for imaging application in living systems and quantitative analysis in environmental/food samples

Mercury ions are highly toxic and can accumulate along food chains in water, soil, crops and animals. Effective detection of mercury ions in various media is of great significance for maintaining the ecological environment and protecting people’s health. In this work, a mercury ions specific fluorescent probe was developed by a simple one-step reaction of commercial substrates of 4-chloro-7-nitro-2,1,3-benzoxadiazole and 1-(2-aminoethyl)-4-methylpiperazine. Investigation on sensing behavior showed that this probe had high sensitivity and selectivity towards mercury ions. Furthermore, this probe could be used as a tool to track the level of mercury ions in living system. In living cells, the probe with green emission emitted a bright red fluorescence when it was bound to mercury ions. In Arabidopsis thaliana, similar red emission could be detected from the root tip and stalk when A. thaliana was grown in culture medium containing mercury ions. The imaging in zebrafish showed that mercury ions were mainly concentrated in the stomach and head of zebrafish. Especially, this probe could be applied in quantitative analysis of mercury ions in tap water, green tea, sea shrimp and soil. This work provided a practical tool for the detection of mercury ions in living systems and quantitative analysis in real samples.     

A highly selective colorimetric aqueous sensor for mercury

A new colorimetric mercury sensor is reported based on binding to terpyridine derivatives. It is able to selectively detect Hg II ions over a number of environmentally relevant ions including Ca II, Pb II, Zn II, Cd II, Ni II, Cu II, and others. The response time upon exposure to Hg II is instantaneous. By the "naked eye," the detection limit of Hg II is 2 ppm (25 microM) in solution. With a spectrometer, this detection limit is increased down to 2 ppb (25 nM), which is the current EPA standard for drinking water. The significant problem of mercury poisoning requires new methods of detection that are sensitive and selective. Here we report a new simple system that takes advantage of the unique optical properties generated by terpyiridine-Hg complexes.     

An ESIPT-based fluorescent probe for Hg2+ in aqueous solution and its application in live-cell imaging

A new Excited-State Intramolecular Proton Transfer (ESIPT) based fluorescent probe for the detection of Hg²⁺ has been rationally designed and developed. Based on the specific reactivity of mercury-promoted hydrolysis, the probe exhibits high selectivity and sensitivity for mercury ions in almost pure aqueous solution (containing only 1% DMSO) with a low detection limit of 1.9?ppb. Furthermore, the probe was also successfully used for fluorescence imaging of Hg²⁺ in live cells.     

Direct colorimetric visualization of mercury (Hg) based on the formation of gold nanoparticles

It is critical to be able to detect and quantify Hg²⁺ ions under aqueous conditions with high sensitivity and selectivity. The technique presented herein provides a direct way for simple colorimetric visualization of Hg²⁺ ions in aqueous solution, based on the formation of gold nanoparticles through the Hg²⁺ catalyzed HAuCl₄/NH₂OH reaction. The outstanding selectivity and sensitivity result from the well-known amalgamation process that occurs between mercury and gold. The entire procedure takes less than 20 min. The limit of detection (2 ppb) shows excellent potential for monitoring ultralow levels of mercury in water samples.     

Development of silver/gold nanocages onto indium tin oxide glass as a reagentless plasmonic mercury sensor

We demonstrate the utilization of silver/gold nanocages (Ag/Au NCs) deposited onto transparent indium tin oxide (ITO) film glass as the basis of a reagentless, simple and inexpensive mercury probe. The localized surface plasmon resonance (LSPR) peak wavelength was located at ∼800 nm. By utilizing the redox reaction between Hg²⁺ ions and Ag atoms that existed in Ag/Au NCs, the LSPR peak of Ag/Au NCs was blue-shifted. Thus, we develop an optical sensing probe for the detection of Hg²⁺ ions. The LSPR peak changes were lineally proportional to the concentration of Hg²⁺ ions over the range from 10 ppb to 0.5 ppm. The detection limit was ∼5 ppb. This plasmonic probe shows good selectivity and high sensitivity. The proposed optical probe is successfully applied to the sensing of Hg²⁺ in real samples.     

Flow Injection Analysis of Mercury/Cold Vapor Atomic Fluorescence Spectrophotometry

Abstract

A new flow injection system for the determination of mercury by the cold vapor atomic fluorescence method is described. A sample solution (64 μ1) is injected into a stream of 0.1 M hydrochloric acid, which is mixed with a stream of 3% tin (II) chloride solution in a mixing joint. The combined stream is carried through a reaction coil for reduction of Hg (II) to Hg (0) and subsequently introduced into a specially designed gas-liquid separation vessel. Then the vaporized mercury is swept into a flow type fluorescence cell with a continuous flow of argon after removal of water in the gas phase through a condenser. Mercury is excited with an electrodeless discharge lamp as a source and the mercury fluorescence at both 184.9 and 253.7 nm is measured with a solar-blind photomultiplier. This method allows about 35 determinations of mercury in aqueous samples per hour. The calibration curve is linear over the 0–20 ppb range of mercury. The limit of detection (S/N = 3) is 0.008 ng (0.12 ppb × 64 μ1) and the coefficient of variation is below 1% for the 1–20 ppb solutions (n=10).     

Sensitive detection and semiquantitative determination of mercury(II) and lead(II) in aqueous media using polyurethane foam immobilized 1,5-di-(2-fluorophenyl)-3-mercaptoformazan

1,5-Di-(2-fluorophenyl)-3-mercaptoformazan (F(2)H(2)Dz) immobilized and plasticized with tri-n-butylphosphate (TBP) polyurethane foam (PUF) were found suitable for the detection of mercury(II) and lead(II) in extremely dilute aqueous solutions. In batch mode of extraction with immobilized F(2)H(2)Dz-foam as low as 0.05 and 0.15 mug ml(-1) of mercury(II) and lead(II), respectively were detected and the colored chelates were found more stable over 72 h. Lower concentrations of these metal ions (相似文献   

Determination of Mercury with a Miniature Sensor for Point-of-care Testing

In developing countries, subsistence gold mining entails mixing metallic mercury with crushed sediments to extract gold. In this approach, the gold−mercury amalgam is heated to evaporate mercury and obtain gold. Thus, the highly volatile mercury can be absorbed through inhalation, resulting in adverse health effects. Urinalysis can be used to detect mercury, which is excreted in urine and feces, and correlate exposure with toxic effects. The current gold standard analytical methods are based on fluorescence or inductively coupled plasma mass spectrometry methods, but are expensive, time consuming, and are not easily accessible in countries where testing is needed. In this work, we report on a miniature electrochemical sensor that can rapidly detect mercury in urine at levels well below the US Biological Exposure Index (BEI) limit of 50 ppb (μg/L). The sensor is based on a thin-film gold electrode and anodic stripping voltammetry electroanalytical approach. The sensor successfully detected mercury at trace levels in urine, with a limit of detection of ∼15 ppb Hg in the linear range of 20–80 ppb. With the low-cost disposable sensors and portable instrumentation, it is well suited for point-of-care applications.     

Stripping voltammetric determination of mercury(II) at antimony-coated carbon paste electrode

A new procedure was elaborated to determine mercury(II) using an anodic stripping square-wave voltammetry at the antimony film carbon paste electrode (SbF-CPE). In highly acidic medium of 1 M hydrochloric acid, voltammetric measurements can be realized in a wide potential window. Presence of cadmium(II) allows to separate peaks of Hg(II) and Sb(III) and apparently catalyses reoxidation of electrolytically accumulated mercury, thus allowing its determination at ppb levels. Calibration dependence was linear up to 100 ppb Hg with a detection limit of 1.3 ppb. Applicability of the method was tested on the real river water sample.     

Reversible colorimetric probes for mercury sensing

The selectivity and sensitivity of two colorimetric sensors based on the ruthenium complexes N719 [bis(2,2'-bipyridyl-4,4'-dicarboxylate)ruthenium(II) bis(tetrabutylammonium) bis(thiocyanate)] and N749 [(2,2':6',2' '-terpyridine-4,4',4' '-tricarboxylate)ruthenium(II) tris(tetrabutylammonium) tris(isothiocyanate)] are described. It was found that mercury ions coordinate reversibly to the sulfur atom of the dyes' NCS groups. This interaction induces a color change in the dyes at submicromolar concentrations of mercury. Furthermore, the color change of these dyes is selective for mercury(II) when compared with other ions such as lead(II), cadmium(II), zinc(II), or iron(II). The detection limit for mercury(II) ions--using UV-vis spectroscopy--in homogeneous aqueous solutions is estimated to be approximately 20 ppb for N719 and approximately 150 ppb for N749. Moreover, the sensor molecules can be adsorbed onto high-surface-area mesoporous metal oxide films, allowing reversible heterogeneous sensing of mercury ions in aqueous solution. The results shown herein have important implications in the development of new reversible colorimetric sensors for the fast, easy, and selective detection and monitoring of mercuric ions in aqueous solutions.     

Nanocatalyst/Nanoplasmon‐Enabled Detection of Organic Mercury: A One‐Minute Visual Test

We present a fast and sensitive nanosensor that can detect organic mercury, exploiting the combination of the catalytic and plasmonic properties of gold nanoparticles (AuNPs). The method is one‐step and completely instrument‐free, and has a colorimetric readout clearly detectable by simple visual inspection. The AuNPs catalyze efficient organic mercury reduction to the metallic form (Hg⁰), allowing its nucleation and amalgam formation on particle surface, with consequent aggregation‐induced plasmon shift. This leads to very rapid (1 min) and specific colorimetric detection of mercury species. The achieved limit of detection (20 ppb) is compliant with current regulatory limits in food.     

Long‐life Heavy Metal Ions Sensor Based on Graphene Oxide‐anchored Conducting Polymer

A long‐life electrochemical sensor for the continuous analysis of heavy metal ions (Zn(II), Cd(II), Pb(II), Cu(II), and Hg(II)) was developed using the graphene oxide (GO) anchored‐functionalized polyterthiophene (poly[3′‐(2‐aminopyrimidyl)‐2,2′:5′,2′′‐terthiophene], polyPATT) composite. The PATT monomer was synthesized and polymerized with GO to form the composite using a potential cycling method, followed by Nafion coating. The modified sensor surface was characterized employing electrochemical and surface analysis methods. Experimental variables affecting the analytical performance were optimized. Interference effects of other metal ions having similar redox potentials were also investigated. The performance of chronocoulometry (CC) without predeposition was compared with the results of square wave anodic stripping voltammetry (SWASV) with predeposition. The dynamic range of CC for the target ions were between 1 ppb and 10 ppm, respectively with the detection limits between 0.05 (±0.05) and 0.20 (±0.15) ppb for the CC method without predeposition, and between 0.08 (±0.05) and 0.30 (±0.12) ppb for the SWASV with 300 sec of deposition time (n=3 ). The reliability of the method was evaluated by continuously analysing environmental water samples using a single sensor probe in a flow system for 93 days.     

萃取光度法测定痕量氟的改进

本文提出一种新的测定痕量氟的萃取光度法，采用Ｎ，Ｎ－二甲苯胺作萃取剂，证实异戊醇进入萃取的多元络合物组成，以六偏酸钠和乙酰丙酮可消除多量铁、铝的干扰，生物样品则宜用过氧化氢及过氧化钠高压分解。本法可检测多种水样中１０＾－９级的氟，相对标准偏差〈２％。     

Ratiometric detection of mercury ions in water: accelerated response kinetics of azo chromophores having ethynyl ligand tethers

The metal-induced intramolecular cyclization reaction of an azo dye was exploited for the colorimetric detection of mercury ions in water. The molecular probe 3 responds selectively to nM-level Hg(II) ions in neutral aqueous solutions.     

Nanoparticles as scaffolds for FRET-based ratiometric detection of mercury ions in water with QDs as donors

The quenching of quantum dots' emission by some analytes (Hg(2+), Pb(2+), etc.) has long been hindering the fabrication of QD-based 'turn-on' or ratiometric fluorescent sensors for these analytes. In this study, we demonstrate a facile solution for constructing a robust FRET-based ratiometric sensor for Hg(2+) detection in water with CdTe QDs as the donor. By using the reverse microemulsion approach, CdTe QDs were first embedded into nanosized silica particles, forming the QDs/silica cores, a positively charged ultrathin spacer layer was then deposited on each QDs/silica core, followed by the coating of a mercury ion probe on the particle surfaces. The resultant multilayered QDs/silica composite nanoparticles are dispersible in HEPES buffered water; and in the presence of mercury ions, the QDs inside the nanoparticles will not be quenched by mercury ions due to the existence of the positively charged spacer layer, but can transfer their excited energy to the acceptors (probe/Hg(2+) complex), thus achieving the FRET-based ratiometric sensing for mercury ions in totally aqueous media. With its detection limit of 260 nM, this QD-based sensor exhibits high selectivity toward mercury ion and can be used in a wide pH range. This strategy may be used to construct QDs-based ratiometric assays for other ions which quench the emission of QDs.     

气相富集-溶出伏安法测定汞的研究

元素汞在常温下有很高的挥发性,并与金有很强的结合能力,本文利用汞的这些特性,建立了一个测汞的新方法,即气相富集-阳极溶出伏安法。本方法有很高的选择性和较高的灵敏度。用883型极谱仪,汞浓度的定量测定范围为0.2-8.0ppb,定性检出下限为0.05ppb,将此法用于实际水样的测定,得到了满意的结果。     

Determination of trace amounts of iron by catalytic-adsorptive stripping voltammetry

A highly sensitive and selective voltammetric procedure is described for the determination of trace amounts of iron. The procedure is based on the adsorptive collection of an iron-thiocyanate-nitric oxide complex on a hanging mercury drop electrode. The adsorbed complex catalyzes the reduction of nitrite in solution, which gives a detection limit of 40 ppt iron (30 s accumulation). The stripping current increases linearly with iron concentration up to 80 ppb. The relative standard deviations are 4.2% and 1.6% at 0.5 ppb and 40 ppb respectively. Most of the common ions, except cobalt, do not interfere with the determination of iron. The procedure is applied to determine iron in biological samples, natural waters and analytical-grade chemicals.     

Adsorption behavior of mercury and precious metals on cross-linked chitosan and the removal of ultratrace amounts of mercury in concentrated hydrochloric acid by a column treatment with cross-linked chitosan.

Cross-linked chitosan was synthesized with chitosan and ethylene glycol diglycidyl ether. The adsorption behavior of trace amounts of metal ions on the cross-linked chitosan was systematically examined by packing it in a mini-column, passing a metal solution through it and measuring metal ions in the effluent by ICP-MS. The cross-linked chitosan adsorbed mercury and precious metals (Pd, Pt, and Au) at pH values from acidic to neutral. Especially, mercury in concentrated hydrochloric acids could be adsorbed on cross-linked chitosan quantitatively by an anion-exchange mechanism in the form of a stable chloride complex. This method was applied to the removal of mercury from commercially available hydrochloric acid; more than 97% of mercury was removed, and the residual mercury in the hydrochloric acid (Grade: for trace analysis) was found to be 0.15 ppb. Mercury adsorbed on the cross-linked chitosan could be easily desorbed with an eluent containing I M hydrochloric acid and 0.05 M thiourea. The thus-refreshed cross-linked chitosan could be repeatedly used for the removal of mercury in hydrochloric acid.     

Surface-enhanced Raman scattering in nanoliter droplets: towards high-sensitivity detection of mercury (II) ions

We report a new method for the trace analysis of mercury (II) ions in water. The approach involves the use of droplet-based microfluidics combined with surface-enhanced Raman scattering (SERS) detection. This novel combination provides both fast and sensitive detection of mercury (II) ions in water. Specifically, mercury (II) ion detection is performed by using the strong affinity between gold nanoparticles and mercury (II) ions. This interaction causes a change in the SERS signal of the reporter molecule rhodamine B that is a function of mercury (II) ion concentration. To allow both reproducible and quantitative analysis, aqueous samples are encapsulated within nanoliter-sized droplets. Manipulation of such droplets through winding microchannels affords rapid and efficient mixing of the contents. Additionally, memory effects, caused by the precipitation of nanoparticle aggregates on channel walls, are removed since the aqueous droplets are completely isolated by a continuous oil phase. Quantitative analysis of mercury (II) ions was performed by calculating spectral peak area of rhodamine B at 1,647 cm⁻¹. Using this approach, the calculated concentration limit of detection was estimated to be between 100 and 500 ppt. Compared with fluorescence-based methods for the trace analysis of mercury (II) ions, the detection sensitivities were enhanced by approximately one order of magnitude. The proposed analytical method offers a rapid and reproducible trace detection capability for mercury (II) ions in water.     

Square-wave anodic stripping voltammetric determination of thallium(I) at a Nafion/mercury film modified electrode

A Nafion/mercury film electrode (NMFE) was used for the determination of trace thallium(I) in aqueous solutions. Thallium(I) was preconcentrated onto the NMFE from the sample solution containing 0.01 M ethylenediaminetetraacetate (EDTA), and determined by square-wave anodic stripping voltammetry (SWASV). Various factors influencing the determination of thallium(I) were thoroughly investigated. This modified electrode exhibits good resistance to interferences from surface-active compounds. The presence of EDTA effectively eliminated the interferences from metal ions, such as lead(II) and cadmium(II), which are generally considered as the major interferents in the determination of thallium at a mercury electrode. With 2-min preconcentration, linear calibration graphs were obtained over the range 0.05-100 ppb of thallium(I). An even lower detection limit, 0.01 ppb, were achieved with 5-min accumulation. The electrode is easy to prepare and can be readily renewed after each stripping experiment. Applicability of this procedure to various water samples is illustrated.