HP－50＋大口径毛细管气相色谱法测定水果中多种有机氯农药残留量

以ＨＰ－５０＋大口径毛细管柱为分离柱，ＧＣ－ＥＣＤ测定水果中１４种有机氯农残。方法的检测限为０．１×１０￣（－９）～２．０×１０￣（－９），回收率范围在８８．６％～１０５．８％，变异系数２．６％～１０．５％。样品前处理采用微量化学法。     

毛细管气相色谱法测定牛奶中有机氯和有机磷农药残留量

采用一个较快速、简单的方法测定牛血中有机氯和有机磷农药残留物。牛奶中农残经氯仿萃取和固相提取净化后，分别用气相色谱－电子捕获检测器和气相色谱－火焰光度检测器直接测定，色谱柱为ＨＰ－１接ＨＰ－５、ＤＢ１７大口径石英毛细管柱。本法对１７种有机氯农残的回收效率范围为７１．２％￣９９．７％，检测限为０．５￣９μｇ／ｋｇ。而１１种有机磷农残的回收率范围为７０．１％￣９６．１％，检测限则为０．０１￣０．０４ｍ     

新型液晶／高聚物复合富氧膜的富氧性能及结构表征Ⅰ．液晶／高聚物复合膜的富氧性能研究

研究用烃橡胶（ＳＢＲ、ＰＢ）和聚二甲基硅氧烷（ＰＤＭＳ）分散α，ω－对乙氧羰氧基苯甲酸聚乙二醇酯（ＰＥＥＣＢ）而得到聚合物分散液晶复合膜（ＰＤＬＣＭ）．用这种复合膜进行富氧分离，当ＰＥＥＣＢ－４．０５（４．０５为聚醚软段的数均聚合度ＤＰ）的含量超过某一临界值（约２３．０％ｗｔ）时，室温下ＳＢＲ／ＰＥＥＣＢ－４．０５／ＰＤＭＳ体系膜的氧气透过系数Ｐｏ２值达７０～６３４ｂａｒｒｅｒ），增加约６０倍，分离系数仍较高（αｏ２／Ｎ２＝３．４７～２．５９）．考察了各种影响因素对膜透气性能的影响．     

用GC-MS法分析柿树叶中的脂肪酸

用乙醚－己烷混合溶剂抽提柿树叶中的脂肪酸,ＮａＯＨ－ＣＨ３ＯＨ交换法甲酯化,毛细管柱ＦＦＡＰ作为分离柱,进行气相色谱－质谱法测定脂肪酸（以甲酯的形式）的组成。共分离出２１种脂肪酸,鉴定出１９种,占总含量的９８．７２％,其中以肉豆蔻酸（６．６８％）、棕榈酸（３０．００％）、硬脂酸（１０．４２％）、十六碳三烯酸（１．４４％）、亚油酸（１．８４％）、十八碳－烯酸（２２．２２％）、亚麻酸（１．２５％）、花     

接枝共聚物氯化聚乙烯－苯乙烯对聚苯乙烯的共混改性

用氯化聚乙烯接枝苯乙烯共聚物（ＣＰＥ－ｇ－Ｓｔ）和氯比聚乙烯（ＣＰＥ）对聚苯乙烯（ＰＳ）进行共混改性．当ＣＰＥ含量为２５％时，用ＣＰＥ－ｇ－Ｓｔ改性的共混物的冲击强度为１８．５ｋＪ·ｍ￣（－２），是用ＣＰＥ改性的共混物冲击强度的２．１倍；其拉伸强度不低于３４ＭＰａ．     

接枝共聚物氯化聚乙烯—苯乙烯对聚苯乙烯的共混改性

用氯化聚乙烯接枝苯乙烯共聚物（ＣＰＥ－ｇ－Ｓｔ）和氯化聚乙烯（ＣＰＥ）对聚苯乙烯（ＰＳ）进行共混改性。当ＣＰＥ含量为２５％时，用ＣＰＥ－ｇＳｔ改性的共混物的冲击强度为１８．５ｋＪ．ｍ＾－＾２，是用ＣＰＥ改性的共混物冲击强度的２．１倍；其拉伸强度不低于３４ＭＰａ。     

茶叶中7种拟除虫菊酯农药残留量的检测方法

建立了一种同时测定茶叶中７种拟除虫菊酯农药残留量的气相色谱方法,试样中的拟除虫菊酯酯农药残留经丙酮－水（体积比８：１）体系萃取,正己烷反萃取,然后用乙腈萃取,弗罗里硅土柱净化,以ＧＣ－ＥＣＧ方法测定,外标法定量。实验表明,试样中添加质量分数（ｗ）０．０１＊１０＾－６－１．０＊１０＾－６含量水平的联苯菊酯,氯菊酯、氯氰菊酯、氰戊菊酯、溴氰菊酯,方法回收率为７５．０％－１０３．０％,最小检测含量０．１＊１０＾－７（ｗ）;试样中添加０．００２＊１０＾－６－０．２０＊１０＾－６含量水平的甲氰菊酯,方法回收率为９２．０％－１００．０％,最小检测含量０．２＊１０＾－８（ｗ）;试样中添加０．００１＊１０＾－６－０．１０＾－６含量水平的三氟氯氰菊酯,方法回收率为９６．０％－１０２．０％,最小检测含量０．１＊１０＾－８（ｗ）。同     

中药材黄芪中氨基甲酸酯农药残留量的毛细管气相色谱法测定

研究了黄芪中的氨基甲酸酯农药（包括呋喃丹、西维因、甲霜灵）残留量的毛细管气相色谱测定方法。采用正己烷－丙酮混合溶剂提取,经柱层析净化后,用ＳＥ－３０毛细管柱为分离柱,ＦＴＤ（火焰热离子检测器）检测,３种农药在２０ｍｉｎ内获得良好的分离。该法灵敏度高,且易操作。当添加水平为０．２×１０－６时,回收率为８９．３３％～９８．１８％,线性相关系数ｒ为０．９９７０～０．９９８５,检测限可达１９．０ｐｇ。     

PMBP为载体的乳状液膜提取钪的研究

研究了以１－苯基－３－甲基－４－苯甲酰基吡唑酮－５（ＰＭＢＰ）为流动载体的乳状液膜（ＥＬＭ）法提取钪，确定最佳液膜体系组成为０．４％ＰＭＢＰ－３％Ｓｐａｎ８０－５％液体石蜡－煤油－３ｍｏｌ／ＬＨＣｌ，Ｒｏｉ＝１：１（油内比）．Ｒｗｅ（水乳比）可达２０：１．用该体系对钪与混合稀土进行分离，钪的回收率可达９５．５％，分离系数β（ＳＣ／ＲＥ）＝３２．０。     

酞侧基聚芳醚砜／聚苯硫醚共混物的形态与力学性能

酞侧基聚芳醚砜（ＰＥＳ－Ｃ）与聚苯硫醚（ＰＰＳ）具有部分相容性，虽然ＰＰＳ的强度和韧性均低于ＰＥＳ－，但ＰＰＳ含量为２％～１０％的ＰＥＳ－Ｃ／ＰＰＳ共混物在保持ＰＥＳ－Ｃ原有强度，断裂伸长率的同时，模量略增，冲击强度有很大幅度提高，熔融指数亦蛔。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Copper catalyzed/mediated synthetic methodology for ebselen and related isoselenazolones

Scope of the copper catalyzed/mediated selenium-nitrogen coupling reaction has been studied for the synthesis of isoselenazolones. It is noticed that the 2-chloro, 2-bromo-, and 2-iodo-aryl amides substrates can be exploited in the selenium-nitrogen coupling reaction by employing 25-100 mol % of CuI/1,10-phenanthroline (L) and potassium carbonate as a base in DMF. Furthermore, electron rich 2-chloro-arylamides also underwent selenium-nitrogen coupling reaction to give biologically important selenium-nitrogen heterocycles. Also, copper-catalyzed selenium-nitrogen coupling reaction has been meticulously applied for the synthesis of diaryl diselenides having methoxy, amine, and amide functionality from respective aryl iodides in the presence of stoichiometric amount of succinimide as an external Se-N coupling partner.     

Knoevenagel condensation catalyzed by novel Nmm-based ionic liquids in water

A series of novel N-methyl morpholine (Nmm) based ionic liquids with 1,2-propanediol group were synthesized and used as catalysts for Knoevenagel condensation at room temperature in water. Under the effect of the catalyst, various aldehydes or aliphatic ketones could react with a wide range of activated methylene compounds well, including malononitrile, alkyl cyanoacetate, cyanoacetamide, β-diketone, barbituric acid, 2-arylacetonitrile and thiazolidinedione. Furthermore, most of the products could be separated just by filtrating and washing with water. Additionally, the catalyst is recyclable and applicable for the large-scale synthesis.     

Construction of polyheterocyclic spirotetrahydrothiophene derivatives via sulfa-Michael/aldol cascade reaction

A series of polyheterocyclic spirotetrahydrothiophene derivatives were obtained in moderate to excellent yields via a catalyst-free sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 under mild conditions. We also present the first asymmetric sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 with moderate to good enantioselectivities catalyzed by readily available chiral phase-transfer catalysts (PTCs).     

Suzuki-Miyaura reactions of the soluble guanylate cyclase inhibitor NS2028: a non-product specific route to C-8 substituted analogues

Both soluble guanylate cyclase (sGC) inhibitors ODQ 1 and NS2028 2 are synthesized via improved protocols. In the former case treating 3,4-dihydroquinoxalin-2(1H)-one oxime 8, which can be prepared in two steps from 1,2-benzenediamine, with 1,1′-carbonyldiimidazole (CDI) gives the dihydro-ODQ 10 that in the presence of KMnO₄ oxidises to give ODQ 1 in an overall yield of 46% starting from 1,2-benzenediamine. In the latter case, the synthesis affords NS2028 2 from 2-amino-4-bromophenol 3 in three steps with an overall yield of 85% and avoids the need for chromatography. Furthermore, Suzuki-Miyaura reaction conditions are described that enable the preparation of 8-aryl and 8-heteroaryl derivatives of NS2028 directly from NS2028 2. Finally, demethylation of the 8-(methoxyphenyl) substituted analogues afforded the 8-(hydroxyphenyl) derivatives 40-42. All new products are fully characterised.