Studies on Electrochemical Behavior of Bleomycin and Its Interaction with DNA at a Co／GC Ion Implantation Modified Electrode

ＩｎｔｒｏｄｕｃｔｉｏｎＩｏｎｉｍｐｌａｎｔａｔｉｏｎｉｓａｋｉｎｄｏｆｎｅｗｍａｔｅｒｉａｌｓｕｒｆａｃｅｍｏｄｉｆｉｃａｔｉｏｎｔｅｃｈｎｉｑｕｅ .Ｒｅｃｅｎｔｌｙ ,Ｌｉｅｔａｌ .1ｈａｖｅｌｅｄｔｈｉｓｔｅｃｈｎｉｑｕｅｉｎｔｏａｎａｌｙｔｉｃａｌｃｈｅｍｉｓｔｒｙａｎｄｍａｄｅｍｏｄｉ ｆｉｅｄｅｌｅｃｔｒｏｄｅｗｉｔｈｐａｒｔｉｃｕｌａｒｆｕｎｃｔｉｏｎ .Ｉｔｈａｓｂｅｅｎａｐ ｐｌｉｅｄｔｏｓｔｕｄｙｔｈｅｅｌｅｃｔｒｏｃｈｅｍｉｃａｌｂｅｈａｖｉｏｒｓａｎｄｔｈｅｄｅ ｔｅｒｍｉｎａｔ…     

Electrochemical Studies of Pirarubicin and Its Interaction with DNA at a Co／GC Ion Implantation Modified Electrode

IntroductionIon implantation is a new material surfacemodification technique.It has been also applied tostudying the electrochemical behaviors of organicdrugs and biological materials as well as their de-terminations. This method offers good stability,reproductivity and catalytic activity[1] .Pirarubicin( THP) is an active highly effective and new antitu-moral anthracycline antibiotic,which has gainedwidespread clinical use in the chemotherapeutictreatment of a variety of human cancers.The d…     

The Study of Electrochemical Behavior of Dopamine at Nano—gold Modified Carbon Fiber Electrode

In the field of detection of neurotransmitters carbon fiber ultramicroelectrode has attracted extensive attention due to its specific features such as particular steady state diffusion profiles and very small IR drop values as well as the ability to work in living organism1. Carbon fiber microelectrodes have been used successfully to detect dopamine in vivo2,3. The electrochemical behavior of dopamine at nano-gold modified carbon fiber electrode was studied in this paper. The electrochemica…     

Direct Electrochemical Oxidation of NADPH at a Low Potential on the Carbon Nanotube Modified Glassy Carbon Electrode

Introduction Because of its novel structural and electronic proper-ties, high chemical stability, and extremely high me-chanical strength and modulus,1 carbon nanotube (CNT), which has become a major subject of many experimen-tal and theoretical investigations, has a wide potential application from structural materials to nanoelectronic components2-12 since its initial discovery by Iijima13 in 1991 and the subsequent report about the synthesis of large quantities of CNT by Ebbesen and cowork…     

Controlled Synthesis and Electrochemical Behavior of Single-crystal MoO2 Nanowhiskers by a Facile Precursor-reduction Route

Among the transition-metal oxides, molybdenum oxides are the focus of much attention owing to its numerous applications in catalysts, additives, sensors, photochromic and electrochromic materials1. Especially, the applications of MoO2 in optical propertie…     

Electrochemical Behavior and Its Electrocatalytic Activity of A P—Mo Heteropolyanion Modified ITO Electrode

ITO is a versatile material in the electronic industry because of its special transparent and conductive properties. However, there are a few reports regarding the adsorption of organic or organometallic compounds on the ITO surface1-4. The heteropolyanions are interested in the field of material science, catalytics, biology, and medicine owing to their chemical, structural, and electronic versatility5-7. One of the most important properties of polyoxometalate anions is their ability to a…     

Electrochemical Behavior and Application of Pirarubicin at Gold Nanoparticles–Modified Indium Tin Oxide Electrode

Abstract

A new type of gold nanoparticles–attached indium tin oxide electrode was made. By SEM and EDS, the as‐prepared gold nanoparticles–modified ITO electrode was characterized. This modified electrode has been used for the determination of pirarubicin (THP) in urine by cyclic voltammetry. Compared to a bare ITO electrode, the modified electrode exhibited a marked enhancement in the current response. Liner calibration curves are obtained in the range 5×10^?9mol/L～1.5×10^?6 mol/L with a detection limit of 1×10^?9 mol/L. The percentage of the recoveries ranged from 99.3% to 106.3%. The practical analytic utility of the method is illustrated by quantitative determination of THP in urine.     

The Electrochemical Behavior of Acetaminophen on Multi‐Walled Carbon Nanotubes Modified Electrode and Its Analytical Application

Abstract

A multi‐walled carbon nanotubes modified glassy carbon electrode (MWNTs/GCE) was fabricated, and the electrochemical behaviors of acetaminophen (ACOP) were investigated on the MWNTs/GCE. The results showed that MWNTs exhibited excellent electrocatalytic effects on the reaction of ACOP by accelerating the electron transfer rate. Cyclic voltammetry (CV) was used to explore the electrochemical redox mechanism of ACOP on the MWNTs/GCE and differential pulse voltammetry (DPV) was taken to determine ACOP in samples, respectively. The results showed that the oxidative peak currents were linear with the concentration of ACOP in the range of 4.0×10^?7–1.5×10^?4 mol l^?1 with the detection limit 1.2×10^?7 mol l^?1. The MWNTs/GCE showed satisfactory stability, selectivity, and it can be used to quantify ACOP in effervescent dosage real samples.     

Preparation, Electrochemical Behavior and Electrocatalytic Activity of a Copper Hexacyanoferrate Modified Ceramic Carbon Electrode

A copper hexacyanoferrate modified ceramic carbon electrode （CuHCF/CCE） had been prepared by two-step sol-gel technique and characterized using electrochemical methods. The resulting modified electrode showed a pair of well-defined surface waves in the potential range of 0.40 to 1.0 V with the formal potential of 0.682 V （vs. SCE） in 0.050 mol·dm^-3 HOAc-NaOAc buffer containing 0.30 mol·dm^-3 KCl. The charge transfer coefficient （a） and charge transfer rate constant （ks） for the modified electrode were calculated. The electrocatalytic activity of this modified electrode to hydrazine was also investigated, and chronoamperometry was exploited to conveniently determine the diffusion coefficient （D） of hydrazine in solution and the catalytic rate constant （kcat）. Finally, hydrazine was determined with amperometry using the resulting modified electrode. The calibration plot for hydrazine determination was linear in 3.0 × 10^-6--7.5 × 10^-4 mol·dm^-3 with the detection limit of 8.0 × 10^-7 molodm^-3. This modified electrode had some advantages over the modified film electrodes constructed by the conventional methods, such as renewable surface, good long-term stability, excellent catalytic activity and short response time to hydrazine.     

The Electrochemical Behavior of Neurotransmitters at a Poly (Pyrrole‐ β‐Cyclodextrin) Modified Glassy Carbon Electrode

Abstract

A glassy carbon electrode surface was modified with an electropolymerized film made of pyrrole and β‐cyclodextrin 1∶1, in a 0.1 M LiClO₄ solution using cyclic voltammetry. The resulting modified electrode (Ppy/β‐CD) exhibits interesting electrocatalytic activity toward the electrochemical oxidation of neurotransmitters such as dopamine (DA) and norepinephrine (NE). Well‐resolved and reversible cyclic voltammograms (CVs) were obtained for these organic compounds in a 0.1 M H₂SO₄ solution. The effect of the pH on the voltammetric response of DA and NE was also investigated inside the range of pH 2.8–8.4. The oxidation current of norepinephrine increase linearly with the concentration inside the range of 4×10^?7 M–2×10^?6 M. The oxidation current of dopamine also followed the same trend range of 2×10^?6 M–10^?5 M. The detection limit was 6×10^?6 M for (DA) and 8×10^?7 M for (NE). As an example, the relative standard deviation for 1×10^?5 M of DA was 2.056%. The diffusion coefficients D for the molecules studied were determined by means of the measurement of the effect of the scan rate on the CVs of the neurotransmitters. All the results showed that the electron transfer was predominantly diffusion controlled at the conducting polymer/solution interface.

Interference phenomenon due to ascorbic acid (AA) toward the neurotransmitters was also investigated. The novel modified electrodes presented capability to resolve perfectly the AA and neurotransmitters oxidation peaks. This performance could be achieved even at a concentration 20 times higher than the neurotransmitters.

Finally, the newly fabricated Ppy/β‐CD film exhibits interesting analytical performances compared with other systems in the literature, such as higher sensitivity, rapid response, good mechanical stability and reproducibility.     

镍离子注入修饰电极上米托蒽醌与DNA相互作用的电化学研究

研究了在镍离子注入修饰电极和0.05mol/LTris-0.5mol/LNaCl缓冲溶液(pH=7.1)中,米托蒽醌(MX)与DNA作用的电化学.在37℃恒温1.5h条件下,MX与DNA形成一种非电活性的结合物,使MX峰电流降低,其结合比n(MX):n(DNA)=2:1,结合常数为1.61×10¹²,电子转移系数为0.41,电极反应速率常数0.33s^-1.加入DNA后,MX峰电流降低,据此,可以测定DNA.     

氨甲蝶呤在Co/GC离子注入修饰电极上电化学行为及其应用研究

氨甲蝶呤在0.1mol/LHAc-NaAc(pH=4.96)缓冲溶液中,用Co/GC离子注入修饰电极进行伏安测定,得到一良好的还原峰,峰电位为-0.95V(vs.SCE).峰电流Ip与氨甲蝶呤的浓度在2.2×10^-7～8.8×10^-6mol/L范围内呈线性关系。检出限为1.1×10^-8mol/L.建立了测定氨甲蝶呤的新方法,可用于实际样品的测定,回收率在98.9%～106.2%之间。用线性扫描和循环伏安法研究了体系的电化学行为及电极反应机理。实验表明,氨甲蝶呤的还原为不可逆吸附过程,并伴随两个电子和两个氢离子参与电极反应。用俄歇电子能谱(AES)和X射线光电子能谱(XPS)等表面分析技术对Co离子注入修饰电极的表面元素组成及深度分布等进行测定,表明Co离子确被注入到玻碳表面。扫速对催化效率的影响实验证明体系存在催化作用。     

吡柔比星在钴离子注入修饰微电极上电化学行为及其应用

吡柔比星在0.1mol/LHAc-NaAc(pH=5.05)缓冲溶液中,用Co离子注入修饰碳纤维微电极进行研究,得到一良好的还原峰,峰电位Ep=-0.520V(vs.SCE).峰电流与吡柔比星浓度在1.0×10^-7～6.0×10^-6mol/L范围内成线性关系,检出限为5.0×10^-8mol/L.用于病人尿样测定,回收率在91.6%～106.7%之间.吡柔比星的还原为可逆吸附过程,伴随着两个电子、两个氢离子参加电极反应.用扫描电子显微镜(SEM)和俄歇电子能谱(AES)两种表面分析技术对Co离子注入修饰微电极的表面状况、表面元素组成及深度分布进行测定.实验表明,Co离子确实被注入到碳纤维表面上.扫速对催化效率的影响实验证明体系存在催化作用.     

米托蒽醌在离子注入修饰电极上的伏安行为及其应用

在0.1mol/LNH₃-NH₄Cl缓冲溶液(pH_9.5)中,米托蒽醌在镍离子注入修饰电极上有一灵敏的伏安还原峰,峰电位为-0.85V(vs.SCE).峰电流与米托蒽醌的浓度成线性关系.检出限为1.8×10^-8mol/L.研究了其伏安行为,并将该波用于尿样的测定.结果表明,还原过程为具有吸附性和催化性的准可逆过程.AES和XPS实验表明,Ni已注入到玻碳电极的表面,使电催化活性提高.     

血红蛋白在L-半胱氨酸微银修饰电极上的电化学行为

L-半胱氨酸通过化学键结合到微银电极表面成化学修饰电极,研究表明此修饰电极对血红蛋白的氧化还原有促进作用.并用预富集和示差脉冲溶出伏安法检测血红蛋白的浓度,检测限为1.0×10~(-8)mol/L,8次测定2.0×10~(-7)mol/L血红蛋白的相对标准偏差是6.3%.     

柔红霉素在钴离子注入修饰玻碳电极上与DNA相互作用

用钴离子注入修饰电极研究了柔红霉素与DNA的相互作用.柔红霉素以嵌入方式与DNA发生作用,形成非电活性的结合物.加入DNA后,柔红霉素的电化学行为没有改变,仍为扩散控制.用非线性拟合得到柔红霉素与DNA的结合常数K=1.09×10⁸cm³/mol,结合数s≈4.DNA分子结构中的1个螺旋结合2个柔红霉素.     

The Electrochemical Behavior of Bleomycin at A Co/GC IonImplantation Modified Electrode

Bleomycin(BLM)isananticancerdrug.BLMhasbeenanalyzedbyosillopolarography'andadsorptivestrippingvoltammetry'.However,theelectrochemicalbehaviorofBLMataCo/GCEanditsdeterminationhavenotbeenreportedsofar.Inthiswork,theelectrochemicalbehaviorofBLMattheCo/GCEhasbeenstudiedandanewmethodforthedeterminationofBLMisproposed.Thismethodissimple,fastandreliable.Theelectrodematerialisglassycarbon(GC).JYZ8010MetalVaporVacuumArcIonSourceisusedforionimplantationatanacceleratingvoltageof40KeVinthed…     

Electrochemical Behavior of Adriamycin at Ni/GC Ion Implantation Modified Electrode

Ionimplantationisakindofnewmaterialsurfacemodificationtechnique.ltsapplicationoffersthefollowingn1arkedadvantagest(l)ItcanimpIantdifferentionsintodifferentmaterialsurfacesaccordingtodifferentdesiresandrequirementstomakemodifiedelectrodeswithcatalyticactivity;(2)TheimpIantedsurfacecausesdefectandpartialdislocationtoformmanyactivecenters,itscatalyticactivityismuchhigherthanthatoftherawmaterial;(3)TheionimplantationmodifiedelectrodehasgoodstabilityandreproducibiIity.Adriamycin(ADM)isthemostpro…     

Nafion修饰电化学活化碳纤维微电极测定去甲肾上腺素

本用自制的碳纤维微电极，经过适当的电化学预处理以后，测定神经递质去甲肾上腺素时，表现出较高的灵敏度，用Ｎａｆｉｏｎ修饰后，能有效地消除脑中去甲肾上腺素的主要干扰物抗坏血酸的干扰，线性范围５×１０＾－５－２×１０＾－４ｍｏｌ／Ｌ，检出下为２×１０＾－８ｍｏｌ／Ｌ，用这种微电极对注射液中的去甲肾上腺素进行测定，回收率在９７．２％－１０２．８５之间，可用于活体分析。