Curie Point Depth Investigation of Central Anatolia,Turkey

The residual aeromagnetic total field intensity anomalies in central Anatolia were calculated from the regional aeromagnetic anomalies surveyed by the Mineral Research and Exploration (MTA) of Turkey. The residual aeromagnetic data were analyzed to produce Curie point estimates by the method of OKUBO et al. (1985). The Curie point depth of central Anatolia varies from 7.9 km and 22.6 km. The shallowest Curie point depths were observed around the Cappadocia and Erciyes Volcanic complexes in central Anatolia. A good correlation was deduced between the Curie point depths and the heat-flow data measured previously, which is most certainly important for the geothermal resources of the region. The shallow Curie point depths also correlate well with the hot spring locations in central Anatolia.     

Geochemical approach to magmatic evolution of Mt. Erciyes stratovolcano Central Anatolia, Turkey

Erciyes stratovolcano, culminating at 3917 m, is located in the Cappadocian region of central Anatolia. During its evolution, this Quaternary volcano produced pyroclastic deposits and lava flows. The great majority of these products are calc-alkaline in character and they constitute Kocdag and Erciyes sequences by repeated activities. Alkaline activity is mainly observed in the first stages of Kocdag and approximately first-middle stages of Erciyes sequences. Generally, Kocdag and Erciyes stages terminate by pyroclastic activities. The composition of lavas ranges from basalt to rhyolite (48.4–70.5 wt.% SiO₂). Calc-alkaline rocks are represented mostly by andesites and dacites. Some compositional differences between alkaline basaltic, basaltic and andesitic rocks were found; while the composition of dacites remain unchanged. All these volcanics are generally enriched in LIL and HFS elements relative to the orogenic values except Rb, Ba, Nb depleted alkaline basalt. ⁸⁷Sr/⁸⁶Sr and ¹⁴³Nd/¹⁴⁴Nd isotopic composition of the volcanics range between 0.703344–0.703964, 0.512920–0.512780 for alkaline basalts and change between 0.704322–0.705088, 0.512731–0.512630 for alkaline basaltic rocks whereas calc-alkaline rocks have relatively high Sr and Nd isotopic ratios (0.703434–0.705468, 0.512942–0.512600). Low Rb, Ba, Nb content with high Zr/Nb, low Ba/Nb, La/Yb ratio and low Sr isotopic composition suggest an depleted source component, while high Ba, Rb, Nb content with high La/Yb, Ba/Nb, low Zr/Nb and low ⁸⁷Sr/⁸⁶Sr ratios indicate an OIB-like mantle source for the generation of Erciyes alkaline magma. These elemental and ratio variations also indicate that the different mantle sources have undergone different degree of partial melting episodes. The depletion in Ba, Rb, Nb content may be explained by the removal of these elements from the source by slab-derived fluids which were released from pre-collisional subduction, modified the asthenospheric mantle. The chemically different mantle sources interacted with crustal materials to produce calc-alkaline magma. The Ba/Nb increase of calc-alkaline samples indicates the increasing input of crustal components to Erciyes volcanics. Sr and Nd isotopic compositions and elevated LIL and HFS element content imply that calc-alkaline magma may be derived from mixing of an OIB-like mantle melts with a subduction-modified asthenospheric mantle and involvement of crustal materials in intraplate environments.     

Rhyolitic ignimbrites in the region of Afyon (Central Anatolia)

Occurrence and field relations of an extensive ignimbrite sheet near Afyon in Central Anatolia are described. These rhyolitic ignimbrites are part of the important Neogene volcanic activity in Turkey and belong to the alignment of volcanic complexes along the inner border of the Taurian ranges. In close stratigraphical connection and in the same tectonic position as the rhyolites there occurs an assemblage of high-potassic, intermediate to basic volcanic rocks (alkali trachytes, mela-trachytes, latites and leucite-bearing rocks). Petrological and magmatological considerations led to the conclusion that the rhyolites and the potassic series, in spite of the close geological connection, are not related by processes of magmatic differentiation. Arguments in favour of an anatectic origin of the rhyolitic melt are presented. The occurrence of garnet and allanite as accessory minerals and as inclusions in the salic minerals of the ignimbrite are interpreted as relictic witnesses of a sialic parent rock. However, the trace elements, especially high Rb connected with low Sr, Ba and Zr and K/Rb ratios below 100 give a pattern generally explained by strong fractionation processes.     

The Geoelectrical Structure of Northwestern Anatolia,Turkey

The magnetotelluric method has been employed to generate a geoelectrical model that will reveal the rich geological pattern and dynamic character of western and northwestern Anatolia, Turkey. Magnetotelluric data were collected from 53 sites along a profile of 290 km from the Dardanelles to the Ala?ehir Graben. Magnetotelluric data were in the range of 0.00055 Hz to 320 Hz. The models were obtained through 2-D joint inversion of transverse electric and transverse magnetic modes. Lateral changes in geoelectrical models are verified by using gravity and magnetic data. In addition, some of the seismological data presented here agree with proposed models that suggest a brittle-ductile structure boundary at a depth of 20 km. Generally speaking, a regional extensional regime caused reduction in the thickness of the crust and consequent uplift towards the south. The constructed model delineates the western part of the North Anatolian Fault Zone along the Biga Peninsula. The current patterns of volcanic activity on the Biga Peninsula and at Kula are related to conductive spots presented in the models. The border of the Gördes Basin, located between the Izmir - Ankara suture zone and the Menderes Massif, is also well delineated. The North Anatolian Fault Zone presents a pattern in which density and susceptibility anomalies attain relatively high values. Fillings covering most of the surface have lower density and susceptibility values than those of underlying structures.     

Hydrogeochemistry of the Simav geothermal field, western Anatolia, Turkey

Thermal waters hosted by Menderes metamorphic rocks emerge along fault lineaments in the Simav geothermal area. Thermal springs and drilled wells are located in the Eynal, Çitgöl and Na a locations, which are part of the Simav geothermal field. Studies were carried out to obtain the main chemical and physical characteristics of thermal waters. These waters are used for heating of residences and greenhouses and for balneological purposes. Bottom temperatures of the drilled wells reach 163°C with total dissolved solids around 2225 mg/kg. Surface temperatures of thermal springs vary between 51°C and 90°C. All the thermal waters belong to Na–HCO₃–SO₄ facies. The cold groundwaters are Ca–Mg–HCO₃ type. Dissolution of host rock and ion-exchange reactions in the reservoir of the geothermal system shift the Ca–Mg–HCO₃ type cold groundwaters to the Na–HCO₃–SO₄ type thermal waters. Thermal waters are oversaturated at discharge temperatures for aragonite, calcite, quartz, chalcedony, magnesite and dolomite minerals giving rise to a carbonate-rich scale. Gypsum and anhydrite minerals are undersaturated with all of the thermal waters. Boiling during ascent of the thermal fluids produces steam and liquid waters resulting in an increase of the concentrations of the constituents in discharge waters. Steam fraction, y, of the thermal waters of which temperatures are above 100°C is between 0.075 and 0.119. Reservoir pH is much lower than pH measured in the liquid phase separated at atmospheric conditions, since the latter experienced heavy loss of acid gases, mainly CO₂. Assessment of the various empirical chemical geothermometers and geochemical modelling suggest that reservoir temperatures vary between 175°C and 200°C.     

Comparison of the attenuation properties for two different areas in eastern Anatolia,Turkey

In this study, the attenuation properties of the crust and the quality factor of S wave in eastern Anatolia (Turkey) were determined by local earthquakes for two different areas, Oltu and Erzurum. Seismic wave attenuation can be changed with high pressure or structural effects. Therefore, we argued that the estimation of attenuation coefficient in seismic active zones in Eastern Anatolia is a very useful tool to determine seismic activities. It uses regional waveform data set from two stations, OLT and ERZ, for 95 events that occurred in these regions between 2001 and 2005. The attenuation has been determined using the Chobra–Alexeev model based on the epicenter distance–amplitude relations. This model allows for investigation of the effects of variations in attenuation properties for different areas. We introduced a new magnitude formula for these areas using the amplitude normalization methods for reference values M_L=4, so as to correct effects of the magnitudes. We also determined velocity of seismic waves. The average attenuation coefficient (α), average quality factor (Q_s) and P and S waves velocities were obtained with normalized amplitude values for Erzurum (ERZ) and Oltu (OLT) as 0.0135 km⁻¹, 37, 6.20 km/s and 3.38 km/s and 0.0151, 34, 6.13 and 3.48.     

The geology of Mount Hasan stratovolcano, central Anatolia, Turkey

Mount Hasan is a double-peaked stratovolcano, located in Central Anatolia, Turkey. The magmas erupted from this multi-caldera complex range from basalt to rhyolite, but are dominated by andesite and dacite. Two terminal cones (Big Mt. Hasan and Small Mt. Hasan) culminate at 3253 m and 3069 m respectively. There are four evolutionary stages in the history of the volcanic complex (stage 1: Kecikalesi volcano, 13 Ma, stage 2: Palaeovolcano, 7 Ma, stage 3: Mesovolcano and stage 4: Neovolcano). The eruptive products consist of lava flows, lava domes, and pyroclastic rocks. The later include ignimbrites, phreatomagmatic intrusive breccias and nuées ardentes, sometimes reworked as lahars. The total volume is estimated to be 354 km³, the area extent 760 km². Textural and mineralogical data suggest that both magma mixing and fractional crystallization were involved in the generation of the andesites and dacites. The magmas erupted from the central volcanoes show a transition with time from tholeite to calc-alkaline. Three generations of basaltic strombolian cones and lava flows were emplaced contemporaneously with the central volcanoes. The corresponding lavas are alkaline with a sodic tendency.     

Temporal variations of seismicity parameters in the Central Alborz,Iran

Temporal changes of b-value, fractal (correlation) dimensions of epicenters (D _e ) and occurrence time of earthquakes (D _t ) and relations between these parameters were calculated to investigate precursory changes before 28 May 2004, Baladeh-Kojour earthquake (M _w = 6.3) of Central Alborz, Iran. 2086 events with M _N ≥ 1.7 were selected for our analyses. A wide range of variation was seen in these parameters: b-value ～ 0.6–1.11, D _e ～ 0.97–1.64, and D _t ～ 0.13–0.93. The results showed decreases in all fractal parameters several months before the main shock. This decrease, which might have arisen due to clusters of events occurred between 2002–2003, was followed by a systematic increase, corresponding to the increased level of low-magnitude seismicity. It seems that changes in fractal parameters may be precursors of Baladeh-Kojour earthquake which was caused by seismic activation and quiescence. Furthermore, a positive correlation between b-value and D _e was detected before the main shock (D _e = 0.87 + 0.7b) and during aftershock sequences (D _e = 2b ± 0.09), which was further on changed to a negative one (D _e = 2.56–1.32b).     

Geodynamics and seismicity of the Pamir-Himalayas region

Deep seismic sounding studies carried out in 1974–79 allowed an important peculiarity of the deep structure of the Pamir-Himalayas region to be established: the thickness of the Earth's crust is almost twice as large here as on the stable plates (65–75 and 35–37 km, respectively). The absence of any evidence for doubling of crustal thickness provides grounds for rejecting the hypothesis of subduction of the rigid Hindustan plate under the geosynclinal folded constructions of the Punjab syntaxis of the Himalayas. The steep inclination of all major faults, dissecting the Earth's crust and often dislocating the M surface, is also counter to this hypothesis. Several faults reflect the dynamics and conditions of formation of deep layers of the lithosphere. For example, the structural seam of the Indus, which has an almost sheer tilt and which penetrates to subcrustal depths, is a channel along which ophiolite associations of crystalline rocks were squeezed from the mantle. The Fore Himalayan and Major Himalayan faults are the boundaries between different structural facial zones. The band of greatest thickness of crust extends within the zone of greatest thickness of the asthenospheric layer; a deep minimum in the Bouguer anomalies (?550 mGal) corresponds to this zone, as does also a depression on the surface of the geoid.Seismicity of the lithosphere of the Pamir-Himalayas region is caused by geodynamic processes manifested in the higher lithospheric layers by block displacements of the Earth's crust (mostly uplifts), and in the lower parts by shifts of the steeply inclined mantle blocks (the Pamir-Hindukush seismic focal zone).     

Histortical seismicity of the offshore Fujian-Guangdong region

The earthquakes offshore Fujian and Guangdong Provinces concentrated along the two segments near Nan’ao in the south and Quanzhou in the north of the off coast fault, which is very active since the late Pleistocene. In 1918 and 1906, two earthquakes with magnitudes 7.3 and 6.1 respectively occurred in the south and the north regions. With the instrumentally determined seismic parameters of these two earthquakes as standards, the author evaluated the parameters of the historical earthquakes by comparing their macroseismic materials with consideration of the geological background. As a result, chronological tables of historical earthquakes of the south and the north regions were compiled. The seismic activity of the two regions synchronized basically, and their strongest recorded earthquakes were both aroundM _s 7.3. Seismic activity usually intensified before the occurrence of strong events. Aftershocks were frequent, but strong aftershocks usually occurred one to several years after the main shock. Two high tides of seismic activity occurred since the late 15th century. Around 1600, eight earthquakes each with magnitudes over 4.3 occurred in both of the two regions. The magnitude of the strongest shock in the south region is 6.7, that in the north region is 7.5. The second high tide occurred at the early 20th century. Among the 18 earthquakes occurred in the south region, one was of magnitude 7.3; whilst only two earthquakes with magnitudes 6.1 and 5.5 respectively occurred in the north region. Further, medium to strong earthquakes never occurred since 1942. Whether this is the “mitigation effect” of strong shocks, or a big earthquake is brewing in the north region is worth intensive study. The Chinese version of this paper appeared in the Chinese edition ofActa Seismologica Sinica,13, 505–515, 1991. This work is supported by Chinese Joint Seismological Science Foundation.     

The Hasan Dagi stratovolcano (Central Anatolia, Turkey): evolution from calc-alkaline to alkaline magmatism in a collision zone

The Hasan Dagi volcano is one of the two large Plio-Quaternary volcanoes in Cappadocia (Central Anatolia, Turkey). Three stages of edifice construction have been identified for this volcano: Paleovolcano, Mesovolcano and Neovolcano. Most samples from Hasan Dagi volcano are calc-alkaline and define an almost complete trend from basaltic andesite to rhyolite. However, the more recent (Neovolcano) mafic samples are alkaline basalts. The mineralogical and geochemical characteristics of the oldest lavas (Keçikalesi (13 Ma) and Paleo-Hasan Dagi (7 Ma)) are significantly different from those of the younger lavas (Meso- and Neo-Hasan Dagi (<1 Ma)). Calcic plagioclase and pigeonite are typically observed in these older lavas. The Paleovolcano basalts are depleted in alkalis and display a tholeiitic tendency whereas the differentiated lavas are depleted in Na₂O but enriched in K₂O compared to younger lavas. There is an evolution through time towards higher TiO₂, Fe₂O₃^*, MgO, Na₂O and K₂O and lower Al₂O₃ and SiO₂ which is reflected in the basalt compositions. All the basalts display multi-element patterns typical of continental margin magmas with a significant enrichment in LILE (K, Rb, Ba and Th) and LREE and strong (Paleovolcano) to moderate (Meso- and Neovolcano) negative Nb, Zr and Ti anomalies. However, the younger basalts are the most enriched in incompatible elements, in agreement with their alkaline affinities and do not systematically display negative HFSE anomalies. REE data suggest an hydrous amphibole-bearing crystallization history for both Meso- and Neovolcano lavas. The distinction between the older and younger lavas is also apparent in trace element ratios such as Nb/Y, Ti/Y and Th/Y. These ratios indicate the role of a subducted component±crustal contamination in the genesis of the Hasan Dagi lavas, particularly for the oldest lavas (Keçikalesi and Paleo-Hasan Dagi). The decreasing influence of this component through time, over the last 6–7 m.y., has been accompanied by an increasing contribution of melt-enriched lithosphere. Although the range of variation of Sr, Nd and Pb isotopic ratios is small (0.70457–0.70515; 0.51262–0.51273; 18.80–18.94; 15.64–15.69; 38.87–39.10), it also reflects the evolution of the magma sources through time. Indeed, the youngest (Neovolcano) and most primitive basalts display significantly lower ⁸⁷Sr/⁸⁶Sr than the Paleo- and Mesovolcano basalts, whereas the Mesovolcano basalts display more radiogenic Pb than Paleovolcano samples. Magma mixing processes between initially heterogeneous and/or variably contaminated magmas may account for the genesis of the less differentiated and intermediate lavas (48–57% SiO₂). Meso- and Neovolcano differentiated lavas (60–68% SiO₂) are either derived from the analyzed basalts or from more primitive and more depleted magmas by fractional crystallization±some crustal contamination (AFC). Furthermore, the highly differentiated samples (72–75% SiO₂) are not strongly contaminated. The strong calc-alkaline character of Hasan Dagi lavas, in the absence of contemporaneous subduction, must reflect the heritage of the early subduction of the Afro–Arabian plate under the Eurasian plate. The evolution towards alkaline compositions through time is clearly related to the development of extensional tectonics in Central Anatolia in the Late Miocene.     

Faulting, shallow seismicity and seismic hazard analysis for the Costa Rican Central Valley

Faulting, shallow seismicity (0–30 km), and seismic hazard of the Costa Rican Central Valley were analyzed. Faults in the study area are oriented northwest or northeast. There is an active fault system in the south flank of the Central Volcanic Ridge and another in the north flank of the Talamanca Ridge. Faults of these systems have generated 15 destructive earthquakes in the area during the last 228 years all of them shallow and their locations show one cluster near the Poas Volcano and another southward the Central Valley. These earthquakes have damaged cities of the Central Valley, two of them destroyed Cartago city and almost 1000 people were killed. Regarding recent seismicity, there are three main seismic sources at the Central Volcanic Ridge: Irazu, Bajo de la Hondura and Poas and other three in the Talamanca Ridge: Puriscal, Los Santos and Pejibaye.A seismic hazard map for the Metropolitan Area of San José has been elaborated, based on local tectonic and seismic information. The area for the hazard computation covers an area of 20×15 km² and includes the zone where the most population and socioeconomic activities are concentrated. The computation analysis are based on areas zones and faults, each one characterized by recurrence parameters, geometry, minimum and maximum magnitude and source depth. A recent local spectral attenuation model, which includes relations for shallow crustal sources and subduction zone earthquakes, has been applied in this study. The seismic hazard results are presented in terms of contour plots of estimated peak ground acceleration (PGA) for bedrock conditions for return period of 50, 100 and 500 years. In the Central Park of San Jose City the following PGA values were found: 0.29g for 50 years, 0.36g for 100 years, and 0.53g for 500 years.     

Geochemistry and tectonic setting of Tertiary volcanism in the Güvem area, Anatolia, Turkey

Detailed field mapping in the Güvem area in the Galatia province of NW Central Anatolia, Turkey, combined with K–Ar dating, has established the existence of two discrete Miocene volcanic phases, separated by a major unconformity. The magmas were erupted in a post-collisional tectonic setting and it is possible that the younger phase could be geodynamically linked to the onset of transtensional tectonics along the North Anatolian Fault zone. The Early Miocene phase (18–20 Ma; Burdigalian) is the most voluminous, comprising of over 1500 m of potassium-rich intermediate-acid magmas. In contrast, the Late Miocene volcanic phase (ca. 10 Ma; Tortonian) comprises a single 70-m-thick flow unit of alkali basalt. The major and trace element and Sr–Nd isotope compositions of the volcanics suggest that the Late Miocene basalts and the parental mafic magmas to the Early Miocene series were derived from different mantle sources. Despite showing some similarities to high-K calc-alkaline magma series from active continental margins, the Early Miocene volcanics are clearly alkaline with higher abundances of high field strength elements (Zr, Nb, Ti, Y). Crustal contamination appears to have enhanced the effects of crystal fractionation in the petrogensis of this series and some of the most silica-rich magmas may be crustal melts. The mantle source of the most primitive mafic magmas is considered to have been an asthenospheric mantle wedge modified by crustally-derived fluids rising from a Late Cretaceous–Early Tertiary Tethyan subduction zone dipping northwards beneath the Galatia province. The Late Miocene basalts, whilst still alkaline, have a Sr–Nd isotope composition indicating partial melting of a more depleted mantle source component, which most likely represents the average composition of the asthenosphere beneath the region.     

Structure of the Nemrut caldera (Eastern Anatolia, Turkey) and associated hydrothermal fluid circulation

Plio-Quaternary volcanism played an important role in the present physical state of Eastern Anatolia. Mount Nemrut, situated to the west of Lake Van is one of the main volcanic centers in the region, with a spectacular summit caldera 8.5 × 7 km in diameter. The most recent eruptions of the volcano were in 1441, 1597 and 1692. Nemrut Lake covers the western half of the caldera; it is a deep, half-bowl-shaped lake with a maximum depth of 176 m. Numerous eruption centers are exposed within the caldera as a consequence of magma–water interaction. Current activity of Nemrut caldera is revealed as hot springs, fumaroles and a small, hot lake.Self-potential and bathymetric surveys carried out in the caldera were used to characterize the structure of the caldera and the associated hydrothermal fluid circulation. In addition, analyses based on digital elevation models and satellite imagery were used to improve our knowledge about the structure of the caldera. According to SP results, the flanks of the volcano represent “the hydrogeologic zone”, whereas the intra-caldera region is an “active hydrothermal area” where the fluid circulation is controlled by structural discontinuities. There is also a northern fissure zone which exhibits hydrothermal signatures. Nemrut caldera collapsed piecemeal, with three main blocks. Stress controlling the collapse mechanism seems to be highly affected by the regional neotectonic regime. In addition to the historical activity, current hydrothermal and hydrogeologic conditions in the caldera, in which there is a large lake and shallow water table, increase the risk of the quiescent volcano.     

新疆于田地区背景地震与触发地震活动分析

正新疆于田地区历史上发生过多次6.0级以上地震,北京时间2020年6月26日在此地区再次发生MS 6.4地震。震后,中国地震局地震预测研究所紧急开展地震应急会商,并组织多家单位针对此次地震开展了虚拟科考工作。其中,所发生的地震是否属于其他强震的余震,与历史上已发生的多个强震存在怎样的关系,或者还是属于独立的背景地震活动,     

Spatio-temporal drought analysis in the Trakya region,Turkey

Abstract

Since droughts are natural phenomena, their occurrence cannot be predicted with certainty and thus it must be treated as a random variable. Once drought duration and magnitude have been found objectively, it is possible to plan for the transport of water in known quantities to drought-stricken areas either from alternative water resources or from water stored during wet periods. The summation of deficits over a particular period is referred to as the drought magnitude. Drought intensity is the ratio of drought magnitude to its duration. These drought properties at different truncation levels provide significant hydrological and hydrometeorological design quantities. In this study, the run analysis and z-score are used for determining drought properties of given hydrological series. In addition, kriging is used as a spatial drought analysis for mapping. This study is applied to precipitation records for Istanbul, Edirne, Tekirdag and Kirklareli in the Trakya region, Turkey and then the drought period, magnitude and standardized precipitation index (SPI) values are presented to depict the relationships between drought duration and magnitude.     

Isostasy of the Eastern Anatolia (Turkey) and Discontinuities of its Crust

This paper presents a probable isostatic model of the East Anatolian Region, which lies in a belt of significant plate movements. Probable locations of the horizontal and vertical discontinuities in the crust structure were determined using the normalized full gradient (NFG) method. For the purpose of explaining the mechanism that supports topography corresponding to the crust thickness in the region, calculations of effective elastic thickness (T _e) were carried out initially by utilizing admittance and misfit functions. According to these results, the effective elastic thickness value obtained was less than the crust thickness, even though the isostatic model does not conform with the Airy model. Consequently, it was assumed that there could be problems beneath the crust. Hence, the NFG method was applied on the Bouguer gravity data of the region in order to investigate probable discontinuities in the crust structure. According to the NFG results, vertical structural transitions were observed at a depth ranging between 10 and 30 km, which begin immediately north of the Bitlis Zagros Suture Zone (BZSZ) and continue in a northerly direction. The relationship between the effective elastic thickness (T _e; 13 km in average as determined in the last stage), and the seismogenic zone in the region was investigated. If the T _e value happens to be less then the crustal thickness, then one can say that there are problems in the crustal structure of the region similar to Eastern Anatolia. Indeed, when NFG results of the study area are examined, numerous vertical and horizontal discontinuities in the crust can be observed. These discontinuities, which correspond to low Bouguer gravity anomalies and shallow focal depth-earthquakes, are probably the source of the factors which rule the tectonic mechanism of the region.     

Determination of optimum kernel bandwidth for northern Marmara region,Turkey

As a relatively recent development, spatial smoothing methods have been introduced to identify seismic patterns. Among the methods developed to model the spatial variation, methods based on utilization of 3-D Gaussian isotropic kernels have a wide reception. The most important question remaining to be answered in the application of these methods is the determination of the optimum kernel bandwidth. At the present, researchers’ efforts to clarify the subject have still not yet finalized, this study aims to provide insightful knowledge for future efforts. In this study, for the region bounded by 27°–33° longitudes and 39°–41° latitudes, where the western section of the famous Northern Anatolian fault lies, smoothing techniques are implemented to determine the optimum smoothing kernel bandwidth for point sources. The influence of the modeling of seismicity through the computation of the optimum smoothing kernel bandwidth is examined. In addition, the sensitivity of each smoothing technique to the seismic patterns, whether densely clustered or scarcely populated, is investigated. In the end, the smoothing method based on optimum neighbor number is identified as highly sensitive to the density of seismicity and seismic clusters, and better in modeling high seismicity compared to the model based on single optimum smoothing distance used for the entire region of interest.