Transport through a slab membrane governed by a concentration-dependent diffusion coefficient: Part IV. D(C)/D0=1+(αC)−β(αC)

Using the specific functional form D(C)/D₀=1+(αC)−β(αC)² an investigation has been made of (isothermal) transport through a slab membrane under ‘simple’ boundary conditions and governed by a diffusion coefficient, D(C), which, with increasing concentration, at first increases, passes through a maximum value and finally decreases. The flux, integral diffusion coefficient and concentration profile characteristic of steady-state permeation have been evaluated; special attention has been paid to the positions of such profiles in relation to the corresponding linear distribution associated with a constant diffusion coefficient.The corresponding transient-state transport has been studied within a framework of the time-lag ‘early-time’ and ‘ ’ procedures. Expressions for the ‘adsorption’ and ‘desorption’ time-lags are given. The concentration-dependence of these time-lags, of the (four) integral diffusion coefficients derived from them and of the arithmetic-mean time-lag ratios have been considered in some detail. The ‘early-time’ and ‘ ’ finite-difference procedures have likewise been employed to derive four further integral diffusion coefficients, so enabling a comparison to be made of the nine integral coefficients pertaining to established experimental techniques.Particular interest attaches to the situation for which n≡β(αC₀)=1 (where C₀ is the ingoing or upstream concentration of diffusant) resulting in D(C₀) being symmetrical about C₀/2. Some consideration has been given, in general, to features of transient-state transport when governed by a symmetrical D(C).     

Theoretical studies on the BN substituted fullerenes C70−2x(BN)x (x=1–3)—isoelectronic equivalents of C70

The equilibrium structures and relative stabilities of BN-doped fullerenes C_70−2x(BN)_x (x=1–3) have been studied at the AM1 and MNDO level. The most stable isomers of C_70−2x(BN)_x have been found out and their electronic properties have been predicted. The calculation results show that the BN substituted fullerenes C_70−2x(BN)_x have considerable stabilities, though they are less stable than their all carbon analog. For C₆₈BN, the isomers whose BN is located in the most chemically active bonds of C₇₀ (namely B and A) are among the most stable species, of which B is predicted to be the ground state. The stabilities of C₆₈BN decrease and the dipole moments increase with increasing the distance between the heteroatoms. For C₆₆(BN)₂, the lowest energy species is the isomer in which the B–N–B–N bond is formed; For C₆₄(BN)₃, the most stable species should have three BN units located in the same hexagon to form B–N–B–N–B–N ring. The ionization potentials and the affinity energies of the most stable species of BN-doped C₇₀ are almost the same as those of C₇₀ because of the isoelectronic relationship. The ionization potentials and affinity energies depend on the relative position of the heteroatoms in C₆₈BN, the chemical reactivities of the isomers whose heteroatoms are well separated should differ significantly from their all carbon analog.     

Properties of the perovskites, SrMn1−xFexO3−δ (x=1/3, 1/2, 2/3)

The SrMn_1−xFe_xO_3−δ (x=1/3, 1/2, 2/3) phases have been prepared and are shown by powder X-ray and neutron (for x=1/2) diffraction to adopt an ideal cubic perovskite structure with a disordered distribution of transition-metal cations over the six-coordinate B-site. Due to synthesis in air, the phases are oxygen deficient and formally contain both Fe³⁺ and Fe⁴⁺. Magnetic susceptibility data show an antiferromagnetic transition at 180 and 140 K for x=1/3 and 1/2, respectively and a spin-glass transition at 5, 25, 45 K for x=1/3, 1/2 and 2/3, respectively. The magnetic properties are explained in terms of super-exchange interactions between Mn⁴⁺, Fe^(4+δ)+ and Fe⁽³⁺⁾⁺. The XAS results for the Mn-sites in these compounds indicate small Mn-valence changes, however, the Mn-pre-edge spectra indicate increased localization of the Mn-e_g orbitals with Fe substitution. The Mössbauer results show the distinct two-site Fe⁽³⁺⁾+/Fe^(4+δ)+ disproportionation in the Mn- substituted materials with strong covalency effects at both sites. This disproportionation is a very concrete reflection of a localization of the Fe-d states due to the Mn-substitution.     

Stereoselective total synthesis of (+)-(6R,2′S)-cryptocaryalactone and (−)-(6S,2′S)-epi cryptocaryalactone

The total synthesis of (+)-(6R,2′S)-cryptocaryalactone and (−)-(6S,2′S)-epi cryptocaryalactone is reported based on stereoselective reduction of δ-hydroxy β-keto ester to install 1,3-polyol system, cis Wittig olefination, and lactonization as the key steps. The synthesis of (−)-(6S,2′S)-epi cryptocaryalactone is also reported using syn-benzylidene acetal formation and a preferential Z-Wittig olefination reaction and lactonization as the key steps.     

Physical and excess properties of (methyl acetate + methanol + 1-octyl-3-methyl-imidazolium bis(trifluoromethylsulfonyl)imide) and its binary mixtures at T = 298.15 K and atmospheric pressure

Densities, dynamic viscosities, and refractive indices of the ternary system composed by methanol, methyl acetate, and 1-octyl-3-methyl-imidazolium bis(trifluoromethylsulfonyl)imide and the binary combinations of these constituents have been measured. The excess molar volumes as well as molar refraction and viscosity changes of mixing were calculated and fitted to the Redlich–Kister equation to determine the fitting parameters and the root-mean-square deviations.     

Structure and redox properties of CexPr1−xO2−δ mixed oxides and their catalytic activities for CO, CH3OH and CH4 combustion

A series of Ce_xPr_1−xO_2−δ mixed oxides were synthesized by a sol–gel method and characterized by Raman, XRD and TPR techniques. The oxidation activity for CO, CH₃OH and CH₄ on these mixed oxides was investigated. When the value x was changed from 1.0 to 0.8, only a cubic phase CeO₂ was observed. The samples were greatly crystallized in the range of the value x from 0.99 to 0.80, which is due to the formation of solid solutions caused by the complete insertion of Pr into the CeO₂ crystal lattices. Raman bands at 465 and 1150 cm⁻¹ in Ce_xPr_1−xO_2−δ samples are attributed to the Raman active F_2g mode of CeO₂. The broad band at around 570 cm⁻¹ in the region of 0.3 ≤ x ≤ 0.99 can be linked to oxygen vacancies. The new band at 195 cm⁻¹ may be ascribed to the asymmetric vibration caused by the formation of oxygen vacancies. The TPR profile of Pr₆O₁₁ shows two reduction peaks and the reduction process is followed: . The reduction temperature of Ce_xPr_1−xO_2−δ mixed oxides is lower than those of Pr₆O₁₁ or CeO₂. TPR results indicate that Ce_xPr_1−xO_2−δ mixed oxides have higher redox properties because of the formation of Ce_xPr_1−xO_2−δ solid solutions. The presence of the oxygen vacancies favors CO and CH₃OH oxidation, while the activity of CH₄ oxidation is mostly related to reduction temperatures and redox properties.     

Thermal analysis and thermal expansion studies on high density YBa2−xLaxCu3O7−δ, 0x0.2

The compositions in the YBa_2−xLa_xCu₃O_7−δ (0x0.2) system were prepared by the solid state reaction, employing a novel high-temperature oxygen sintering route. The modified sintering route yields dense slab like microstructures with large grains. The decomposition (incongruent melting) temperature of the YBa₂Cu₃O_7−δ (Y-123) phase was found to shift to higher temperatures with increasing oxygen partial pressure and lanthanum content. Structure remained orthorhombic up to x=0.2 with a decrease in the orthorhombic strain ((b−a)/b). Iodometric titration indicated a systematic increase in the oxygen content with increasing lanthanum content. Thermo-gravimetric studies in various oxygen partial pressures revealed that the oxygen diffusion in to the YBa₂Cu₃O_7−δ (δ>0.5) lattice is an exothermic event and takes place at temperatures not less than 573 K. High-temperature thermal-expansion measurements in air indicated that the nonlinearity in thermal expansion behaviour was reduced by the substitution of lanthanum.     

Excess molar enthalpies for binary mixtures of trimethyl phosphate with alkanols {CH3(CH2)nOH, n = 0–3} at 298.15 K

The excess molar enthalpies () for the binary mixtures of trimethyl phosphate (TMP) with alkanols {CH₃(CH₂)_nOH, n = 0–3} have been measured with an isothermal calorimeter at 298.15 K and atmospheric pressure. The values are positive for all the mixtures over the whole composition range. The values increase in the order methanol < ethanol < 1-propanol < 1-butanol. The experimental results have been correlated with the Redlich–Kister equation.     

Measurements of (p,,T,x) for {x CS2 + (1-x) Si(CH3)4}(1) from 198 to 298 K and pressures up to 104 MPa. Experimental results and derived thermodynamic properties

Molar densities have been measured by using an expansion technique at pressures up to 104 MPa and temperatures from 198 to 298 K for the mixture {x CS₂ + (1-x) Si(CH₃)₄}(1) over the whole composition range. Several thennodynamic properties (isothermal compressibility, thermal expansivity, and molar internal energy, enthalpy and entropy increments relative to liquid at saturation) have been directly obtained from the experimental densities. The isothermal compressibility and the thermal expansivity are both smooth functions of pressure, temperature and composition, although the isotherms of the thermal expansivity exhibit a characteristic crossover at high pressures. The intersection of isotherms of thermal expansivity seems to occur at a single point of the (p,α_p) diagram, showing a nearly linear dependence with the composition.     

Synthesis and X-ray crystal structures of [Ru4H4(CO) 11(PPh3)] and [Ru4−x IrxH2−x(CO) 12(PPh3) ] (x = 0 or 1)

Three tetranuclear clusters [Ru₄H₄(CO)₁₁(PPh₃)] (1), [Ru₄H₂(CO)₁₂(PPh₃)] (2) and [Ru₃IrH(CO)₁₂(PPh₃)] (3) were formed in the reaction of [Ir(CO)Cl(PPh₃)₂] and Na[Ru₃H(CO)₁₁] in tetrahydrofuran. Complexes 1–3 were characterized by IR and ¹H and ³¹P NMR, and the structure of the clusters was confirmed by single crystal X-ray analysis. In 2 and 3 one of the carbonyls bridges between two ruthenium atoms; otherwise the compounds contain only terminal carbonyls.     

Pressure Dependence of the Lattice Distortion in Perovskite La0.5−xBixCa0.5MnO3 (x=0.1, 0.15, 0.2)

The in situ behavior of distorted perovskite La_0.5−xBi_xCa_0.5MnO₃ (x=0.1, 0.15, 0.2) under high pressure has been studied by energy-dispersive X-ray diffraction in a diamond anvil cell. An abnormal change of the 202–040 d-spacing ascribed to the disappearance of the distortion mode Q₂ in the MnO₆ octahedra is observed at 1.2, 1.4, and 1.6 GPa, respectively, and it results in a reduction of the Jahn–Teller distortion commonly existing in the manganites. Effect of the unique 6s² long-pair character of the Bi³⁺ ion on the pressure dependence of the lattice distortion is discussed.     

Thermochemistry of the higher chlorine oxides ClOx (x=3, 4) and Cl2Ox (x=3–7)†

Heats of formation for ClO₃, ClO₄, Cl₂O₃, Cl₂O₄, Cl₂O₅, Cl₂O₆ and Cl₂O₇ molecules are determined at the B3LYP, B3PW91, mPW1PW91 and B1LYP levels of the density functional theory employing a series of extended basis sets, and using Gaussian-3 model chemistries. Modified Gaussian-3 calculations, which employ accurate B3LYP/6-311+G(3d2f) molecular geometries and vibrational frequencies, were also performed. Heats of formation were calculated from both total atomization energies and isodesmic reaction schemes. The latter method in conjunction with Gaussian-3 models leads to the most reliable results. The best values at 298 K for ClO₃, ClO₄, Cl₂O₃ and Cl₂O₄ as derived from an average of G3//B3LYP and G3//B3LYP/6-311+G(3d2f) calculations are 43.1, 54.8, 31.7 and 37.4 kcal mol⁻¹. From calculations carried out at the G3(MP2)//B3LYP and G3(MP2)//B3LYP/6-311+G(3d2f) levels, heats of formation for Cl₂O₅, Cl₂O₆ and Cl₂O₇ are predicted to be 53.2, 52.2 and 61.5 kcal mol⁻¹. All best values are reproduced within 1 kcal mol⁻¹ by using mPW1PW91/6-311+G(3d2f) isodesmic energies. Enthalpy changes for relevant Cl–O bond fission reactions are reported. Comparisons with previous thermodynamics data are made.     

Positron lifetime study of Pr1−xCaxMnO3 (x=0.5, 0.3) during magnetic transition

We measured the positron lifetime in perovskite manganites Pr_1−xCa_xMnO₃ (x=0.3, 0.5). Two lifetime components were observed for each compound; they were attributed to the annihilation of free positrons and positrons trapped at the A-site vacancies. The positron lifetime at the A-site vacancies changed significantly during the antiferromagnetic transition in both the compounds, whereas it was constant around the charge-ordering transition. This change indicates that the electron distribution at the vacancies changed possibly due to the change in the electron distribution of neighboring oxygen atoms. This result indicates that positron lifetime measurements can provide unique information on electronic states during a spin-related phase transition in various oxide materials.     

Efficient UV-emitting X-ray phosphors: octahedral Zr(PO4)6 luminescence centers in potassium hafnium–zirconium phosphates K2Hf1−xZrx(PO4)2 and KHf2(1−x)Zr2x(PO4)3

Potassium hafnium–zirconium phosphates, K₂Hf_1−xZr_x(PO₄)₂ and KHf_2(1−x)Zr_2x(PO₄)₃, are broad-band UV-emitting phosphors. At room temperature, they have emission peak maxima at approximately 322 and 305 nm, respectively, under 30 kV peak molybdenum X-ray excitation. Both phosphors demonstrate luminescence efficiencies that make them up to 60% as bright as commercially available CaWO₄ Hi-Plus. The solid-state and flux synthesis conditions, and X-ray excited UV luminescence of these two phosphors are discussed. Even though the two compounds have different atomic structures, they contain zirconium in the same active luminescence environment as that found in highly efficient UV-emitting BaHf_1−xZr_x(PO₄)₂. All the three materials have hafnium and zirconium in octahedral coordination via oxygen-atom corner sharing with six separate PO₄ tetrahedra. This octahedral Zr(PO₄)₆ moiety appears to be an important structural element for efficient X-ray excited luminescence, as are the edge-sharing octahedral TaO₆ chains for tantalate emission.     

Salt Effects on Volumetric Properties of Some n-Alkoxyethanols (C1Em, m = 1, 2, and 3) in Aqueous Solutions at 298.15 K

Accurate density measurements over the whole composition range were made at a temperature of 298.15 K under ambient pressure for the mixtures of ethylene glycol monomethyl ether (2-methoxyethanol, C₃H₇O₂; C₁E₁), or diethylene glycol monomethyl ether (2-(2-methoxyethoxy)ethanol, C₅H₁₂O₃; C₁E₂), or triethylene glycol monomethyl ether [2-{2-(2-methoxyethoxy)ethoxy}ethanol, C₇H₁₆O₄; C₁E₃) in aqueous salt solutions having a common anion with a view to examining the cationic effect on the volumetric properties. To gain insight into the mixing behavior, results of the density measurements were used to estimate excess molar volumes, V_m^E, apparent molar volumes, V_{, i}, partial molar volumes, , excess partial molar volumes, V_m,i^E, and their limiting values at infinite dilution, V_{, i}, V_m,i, and V_m,i^E,, respectively. Aqueous solutions of the chlorides of lithium, sodium, potassium, and calcium in a concentration range to ca. 1 mol-kg^–1 were chosen for investigation as this concentration is used most frequently in applied chemistry. All mixtures except that containing lithium chloride show a decrease in the magnitude of V_m^E with the addition of a salt when compared to salt-free mixtures. Comparison of the derived volumes at infinite dilution suggested modification of the water structure as well as an electrostatic interaction between the ionic species and an alkoxyethanol molecule.     

Preparation and characterization of lithium ion-conducting glass-ceramics in the Li1 + xCrxGe2 − x(PO4)3 system

Li₂O–Cr₂O₃–GeO₂–P₂O₅ based glasses were synthesized by a conventional melt-quenching method and successfully converted into glass-ceramics through heat treatment. Experimental results of DTA, XRD, ac impedance techniques and FESEM indicated that Li_1.4Cr_0.4Ge_1.6(PO₄)₃ glass-ceramics treated at 900 °C for 12 h in the Li_1 + xCr_xGe_2 − x(PO₄)₃ (x = 0–0.8) system exhibited the best glass stability against crystallization and the highest ambient conductivity value of 6.81 × 10⁻⁴ S/cm with an activation energy as low as 26.9 kJ/mol. In addition, the Li_1.4Cr_0.4Ge_1.6(PO₄)₃ glass-ceramics displayed good chemical stability against lithium metal at room temperature. The good thermal and chemical stability, excellent conducting property, easy preparation and low cost make it promising to be used as solid-state electrolytes for all-solid-state lithium batteries.     

A Mössbauer spectroscopy investigation of the Intergrowth Phases LaSr3Fe3−xMx010−δ (M = Al,Cu)

Iron-57 Mössbauer spectroscopy confirms a high sensitivity of the three-dimensional magnetic ordering temperature (T_Néel) for a series of new intergrowth phases to both oxygen stoichiometry and the partial substitution of iron by copper and aluminium in the Ruddlesden-Popper phase LaSr₃Fe₃0_10?δ. The chemical isomer shifts suggest that significant covalent electron delocalization exists in these phases. Spectra for the paramagnetic phases indicate two distinct iron coordination environments consistent with x-ray and neutron diffraction structure determinations. The Mössbauer spectra at 4.8 K exhibit the overlap of two magnetic hyperfine patterns corresponding to cooperative magnetic order at the iron sites with internal fields of 45 and 27 Tesla for nominal Fe³⁺ and Fe⁴⁺ sites respectively.     

Liquid chromatographic enantioseparation of β-blocking agents with (1R,2R)-1,3-diacetoxy-1-(4-nitrophenyl)-2-propyl isothiocyanate as chiral derivatizing agent

The applicability of (1R,2R)-1,3-diacetoxy-1-(4-nitrophenyl)-2-propyl isothiocyanate [(R,R)-DANI] as a recently developed chiral derivatizing agent for the enantioseparation of a series of β-blockers is described. The thiourea diastereomers formed were analyzed by reversed-phase high-performance liquid chromatography, mixtures of water and methanol or acetonitrile being used for elution. Conditions of derivatizations (temperature, reagent excess and reaction time) were optimized, and the effects of organic modifiers on the retention and separation were investigated; the diastereomers could readily be baseline separated with methanol-containing mobile phases with resolutions between 1.58 and 2.72.     

A TEM, XRD, and crystal chemical investigation of oxygen/vacancy ordering in (Ba1−xLax)2In2O5+x, 0x0.6

A careful TEM and XRD study of the (Ba_1−xLa_x)₂In₂O_5+x, 0x0.6, ‘defect-perovskite’-type solid solution has been carried out. A well-defined structural phase transition is shown to occur between x=0.1 and 0.2 from the orthorhombic brownmillerite structure type on the low x side to a multiple twinned, tetragonal 1×1×2 perovskite-related superstructure phase on the high x side at x=0.2. This phase transition correlates with an important phase transition previously observed in electrical conductivity versus temperature measurements. The existence of additional satellite reflections close to the regions of reciprocal space was found to be typical of all (Ba_1−xLa_x)₂In₂O_5+x specimens, although their intensity relative to the parent Bragg reflections systematically reduces as x increases. As x increases beyond 0.2, the -type satellite reflections initially become weaker and rather more diffuse for x=0.3 before splitting into pairs of rather weak and somewhat diffuse incommensurate satellite reflections for x=0.4 and beyond. An interpretation in terms of oxygen vacancy ordering and associated structural relaxation is given. Additional structured diffuse scattering is also observed and a tentative explanation in terms of Ba/La ordering and associated local strain distortions put forward.     

The metastable Ni7±xS6, and mixed Ni6±x(S1−ySey)5, phases

The closely related, narrowly non-stoichiometric, metastable as well as thermodynamically stable “phases” in the metal-rich part of the Ni–S phase diagram near the nominal composition Ni_7±xS₆ have been carefully re-investigated via electron diffraction and transmission electron microscope imaging. Two quite distinct polymorphs have been identified, a minority incommensurate interface-modulated polymorph and a (heavily twinned) majority I1a1, a=2a_p, b=2b_p, c=−a_p+c_p superstructure (of an underlying Bmmb, a_p3.3, b_p16.4, c_p11.3 Å parent structure) polymorph. The incommensurate polymorph is shown to be very closely related to the only known polymorph of Ni_6±xSe₅ and is rapidly stabilized to room temperature upon doping of the sulfide compounds with selenium.