电感耦合等离子体质谱中的基质效应

电感耦合等离子体质谱(Inductively coupled plasma mass spectrometry,ICP-MS)是痕量元素分析中最常用的检测技术,尽管ICP-MS在元素分析中表现出诸多优势,但其在检测复杂基质样品时,仍会遇到许多问题。复杂基质所引起的基质效应通常会导致分析物信号的抑制或者增强。基质效应影响程度取决于基质成分的绝对浓度,还与基质的种类、分析物的物理和化学性质以及仪器条件有关。该文介绍了ICP-MS中几种常见的基质效应及其影响因素,包括元素基质、含碳基质、酸基质和仪器条件等,探究了基质效应产生的可能原因,对国内外去除基质效应的方法,如样品前处理方法、样品引入系统、优化仪器参数和校准法等进行了系统的归纳和总结,并对基质效应的研究进行了展望。     

复杂基质样品中邻苯二甲酸酯测定的样品前处理

对不同类型复杂基质样品中邻苯二甲酸酯(PAEs)测定的前处理方法进行了研究。待测样品类型包括沉积物、土壤、悬浮颗粒物、地表灰尘、生物组织、化妆品、皮革、塑料以及近岸/河口海水等复杂基质样品。这些样品中PAEs测定的最常用方法为气相色谱-质谱法(GC-MS),针对该测定方法所需的样品前处理研究集中于待测PAEs的萃取、净化等步骤操作条件的确定。对各种样品基质前处理方法的研究结果表明,二氯甲烷是进行固液萃取时最佳的超声振荡提取溶剂;而对各种复杂基质样品的净化,硅胶则是经济、实用的固相萃取填料;C18是最常用的近岸/河口海水样品中PAEs的预富集填料;一定比例的正己烷与乙酸乙酯混合溶液是适宜的固相萃取洗脱液。优化实验条件下,各种样品基质中PAEs的加标回收率高于58%,方法相对标准偏差(RSD)小于10.5%(n=6);方法对沉积物样品中PAEs的检出限(DL,3σ)最低,在0.3 μg/kg(邻苯二甲酸二丁酯)~5.2 μg/kg(邻苯二甲酸二异壬酯)之间;对近岸/河口海水样品的检出限(DL,3σ)在6 ng/L(邻苯二甲酸二丙酯)~67 ng/L(邻苯二甲酸二异癸酯)之间,能满足上述各类复杂基质样品中16种PAEs测定的需要。     

样品前处理介质的制备与应用研究进展

样品分析是环境污染物研究和控制的基础,到目前为止,环境样品前处理仍是环境样品分析的瓶颈问题,其中,针对复杂环境基质中的痕量污染物开发高效率和高选择性的吸附材料是样品前处理的关键和研究热点。微孔有机聚合物、有序介孔硅材料、金属有机骨架聚合物、分子印迹聚合物、碳纳米管和石墨烯等新材料具有骨架密度低、比表面积大、孔尺寸可调控、表面可修饰、化学和物理性质稳定等优点,在样品前处理领域展现出巨大的应用潜力。该文对近年来这些新型纳米材料在固相萃取、分散固相萃取、固相微萃取、磁固相萃取、搅拌棒吸附萃取和基质固相分散萃取等样品前处理领域的最新研究进展做了简要评述,为更好地开发新型纳米材料在复杂和痕量样品前处理中的应用提供了参考。     

金属有机框架材料UiO-67富集净化牛奶中孕激素残留北大核心CSCD

该文制备了一种比表面积大、稳定性好的金属有机框架材料(MOF)UiO-67,将其用于复杂牛奶基质中痕量孕激素的富集和净化。结合超高效液相色谱-四极杆/静电场轨道离子阱高分辨质谱(UHPLC-Q-Orbitrap HRMS),建立了同时测定牛奶中7种孕激素残留的检测方法。采用X射线光电子能谱(XPS)对UiO-67吸附孕激素后的元素谱图进行测试分析,通过对比结合能和官能团相对含量的变化证明了UiO-67与孕激素间发生了化学作用,并研究了UiO-67对1 mg/L和5 mg/L孕激素的吸附效果。考察并优化了吸附剂用量、洗脱溶剂类型和pH值等关键参数,评价了基质效应对孕激素质谱信号的影响。优化结果显示,选择吸附剂用量为40 mg,在样品溶液pH值为5时,用5 mL丙酮洗脱目标物就可获得满意的回收率。基质效应在20%之内,可忽略不计。在优化条件下,7种孕激素在1~100μg/L范围内线性相关性良好,相关系数均达到0.99以上,方法的检出限(LOD)和定量限(LOQ)分别为0.06~0.30μg/L和0.19~1.0μg/L;在不同添加水平下,回收率为87.10%~105.58%,相对标准偏差为2.66%~9.64%。方法成功应用于实际牛奶样品中孕激素的测定,结果与SN/T 1980-2007标准得到的结果具有良好的吻合度。相比较已报道的牛奶中孕激素前处理技术和检测方法,该方法具有较高的灵敏度和满意的回收率,为今后这类材料在复杂基质中有毒有害物质的富集检测提供了新的借鉴思路。     

电场辅助样品前处理技术研究进展

样品前处理是样品分析过程的关键环节。目前各种微波、光、压力、超声波等场作用因能强化溶质传递、加速样品分离而被广泛地运用到样品前处理中。其中,电场辅助样品前处理技术能提高微痕量分析物萃取效率和选择性,已成为场辅助样品前处理技术的研究热点,并已在食品、环境、医药、生物等领域得到应用。该文综述了包括电场辅助膜萃取技术、电场辅助液相(微)萃取技术、电场辅助固相(微)萃取技术在内的电场辅助样品前处理技术的研究进展,并展望了其发展趋势。     

乙醇增强-电感耦合等离子体质谱法测定植物样品中的痕量碘

建立了氨水密封溶样法处理样品,乙醇增强灵敏度,电感耦合等离子体质谱(ICP-MS)直接测定植物样品中痕量和超痕量碘的方法。样品溶液中加入体积分数2%乙醇,同时调节载气流速和采样深度,碘响应信号可增强4倍多。碘的方法检测限可达到(10σ,DF=1000)0.005μg/g。利用建立的方法对圆白菜、菠菜2种植物标准物质中的碘含量进行了测定,测定结果均在标准值的允许误差范围之内。对西宁低碘地区植物样品中碘含量进行了分析,低碘植物样品多为植物的果实部分,碘含量均小于0.01μg/g。     

浊点萃取-火焰原子吸收光谱法测定样品中的痕量钴

研究了基于表面活性剂Triton X-114和络合剂吡咯烷二硫代氨基甲酸铵（APDC）浊点萃取钴的样品前处理方法.优化了浊点萃取条件参数,包括pH值、Triton X-114用量、APDC浓度、平衡温度及时间等,建立了浊点萃取-火焰原子吸收光谱法测定痕量钴的方法.该法的检测限（3σ）为2.6μg/L,相对标准偏差RSD为6.2%（n=7,c=200μg/L）.该法成功地应用于海带、维生素B12注射液等样品中钴的测定.     

气相色谱-负化学电离源质谱法测定鱼油中16种多氯联苯

建立了气相色谱-负化学电离源质谱(GC-NCI-MS)同时测定鱼油中16种多氯联苯(PCBs)的方法。鱼油样品经正己烷提取和浓硫酸净化,在选择离子监测模式下进行GC-NCI-MS检测。所检测的PCBs在0.01~10 μg/L范围内呈现良好的线性关系(r>0.99),定量限(S/N=10)在3~67 pg/g之间。基质加标回收率为62.3%~121.8%,相对标准偏差(n=3)≤12%。相比传统的多种填料固相萃取前处理法,本方法样品处理简单快速,有机溶剂使用量少,具有较好的抗基质干扰能力和较高的灵敏度,适用于鱼油中痕量共平面多氯联苯及常见指示性多氯联苯等的同时检测。     

阻抑动力学光度法测定白鼠肝脏中的超痕量镍(Ⅱ)

在 NH3- H2 O- NH4 Cl介质中 ,超痕量镍 ( )能阻抑 H2 O2 氧化甲基紫褪色的指示反应 ,研究了阻抑褪色反应的最佳条件和动力学参数 ,建立了测定超痕量镍 ( )的新方法。方法检出限为 4.4× 1 0 -11g/m L Ni( ) ,测定范围为 0～1 .0μg/2 5m L。方法已用于测定生物样品中的 Ni( )。     

时间分辨荧光免疫分析方法检测烟草中菌核净残留

建立了简便、灵敏地检测烟草中菌核净残留的时间分辨荧光免疫分析方法(TRFIA),及配套的无净化的快速前处理技术。采用镧系元素螯合物Eu-N1标记亲和纯化后的羊抗兔IgG示踪抗体。采用间接竞争TRFIA法建立了菌核净标准抑制曲线,方法的检出限I10为2.0μg/L;抑制终浓度I50为32.00μg/L;检测线性范围为4～128μg/L。考察了丙酮提取后33%,10%和1%的烟草基质对菌核净-TRFIA分析方法的影响,表明在1%烟叶基质条件下,建立的菌核净的抑制曲线的线性范围与标准抑制曲线趋于平行,确定烟草样品的前处理稀释倍数为100倍,计算得到基质影响因子(Im)为17.1。对烟叶样品中添加1,7和24mg/L的菌核净标样,连续3d的添加回收实验表明,方法的回收率为73%～128%,相对标准标准偏差(RSD)在4.3%～13.2%之间;烟草中菌核净的实际最低检出限为1mg/L。本方法可望用于烟草中菌核净残留的快速筛选检测。     

Multi-residue analytical methods for the determination of pesticides and PPCPs in water by LC-MS/MS: a review

Residues of pesticides, pharmaceutical and personal care products (PPCPs) are contaminants of world-wide concern. Consequently, there is a growing need to develop reliable analytical methods, which enable rapid, sensitive and selective determination of these pollutants in environmental samples, at trace levels. In this paper, a review of the liquid chromatography-tandem mass spectrometry (LC-MS/MS) based methods for the determination of pesticides and PPCPs in the environment is presented. Advanced aspects of current LC-MS/MS methodology, including sample preparation and matrix effects, are discussed.     

Separation and preconcentration of persistent organic pollutants by cloud point extraction

Persistent organic pollutants (POPs) are recognized as a class of poisonous compounds which pose risks of causing adverse effects to human health and the environment. Thus, it is very important to detect POPs in environmental and biological samples. The identification and determination of very low levels of POPs in complex matrices is extremely difficult. Recently a promising environmentally benign extraction and preconcentration methodology based on cloud point extraction (CPE) has emerged as an efficient sample pretreatment technique for the determination of trace/ultra-trace POPs in complex matrices. The purpose of this paper is to review the past and latest use of CPE for preconcentrating POPs and its coupling to different contemporary instrumental methods of analysis. First, the comparison of various extraction techniques for POPs is described. Next, the general concept, influence factors and other methods associated with CPE technique are outlined and described. Last, the hyphenations of CPE to various instrumental methods for their determination are summarized and discussed.     

环境样品中四环素类抗生素的检测技术*

抗生素的大量生产及滥用所造成的环境污染近年来引起国内外极大关注,其中环境样品中痕量抗生素的检测一直是分析工作者致力解决的问题 ,而国内的相关报道较少。四环素类抗生素是临床上重要的一类抗感染药物,在畜牧业及水产养殖业中广泛应用,对环境造成潜在威胁。本文总结了四环素类抗生素的基本性质,介绍了被该类抗生素污染环境样品（如土壤、水样）的采集和储存及样品前处理技术,综述了环境样品中该类抗生素检测技术的研究进展,并探讨了这一领域存在的问题及可能的发展方向。     

LC/MS determination of bisphenol A in river water using a surface-modified molecularly-imprinted polymer as an on-line pretreatment device

A new analytical method for the determination of bisphenol A (BPA) by LC/MS was developed and applied to environmental water samples. Quantitative MS detection of BPA was carried out in the negative mode. In order to preconcentrate the target compound yet prevent serious contamination of the water samples from the experimental environment, we employed column switching HPLC coupled with a pretreatment column of surface-modified molecularly-imprinted polymers. The recovery of BPA from a spiked environmental water sample was 102% and the repeatability of actual determinations of water samples containing 20 ng/L of BPA was 5.4% RSD. By modifying the surfaces of the molecularly-imprinted polymer particles packed in the pretreatment column, interference from the water samples was effectively removed, resulting in a significant increase in sensitivity and more reliable results. This method was successfully applied to the trace determination of BPA in environmental water samples using LC/MS.     

食品及环境样品中双酚类物质的前处理及检测方法研究进展

双酚类物质作为一种环境内分泌干扰物,广泛存在于食品包装材料及环境介质中,对生态环境造成污染,也对人体健康产生一定危害。双酚残留是目前重要的食品安全问题,检测食品和环境样品中的双酚类物质的含量对人体健康具有重要的意义。由于残留目标物浓度通常较低,且实际样品存在基质干扰,因此需经一定的样品前处理,并结合仪器分析方法,提高检测效率,增强分析灵敏度与可靠性。常用的前处理分析方法主要有液液萃取、微波辅助萃取、固相萃取、固相微萃取、基质分散固相萃取、QuEChERS等,常用仪器分析方法包括液相色谱法、气相色谱法、毛细管电泳法、酶联免疫吸附测定法、生物传感器法等。该文综述了食品及环境样品中双酚类物质的样品前处理及仪器分析方法,为双酚类化合物的残留监测提供了参考依据。     

固相萃取-液相色谱-串联质谱法同时测定水中14种短链和长链全氟化合物

建立了固相萃取-超高压液相色谱-三重四极杆质谱同时测定水中14种短链和长链全氟化合物（PFCs）的方法。水样经WAX混合型固相萃取小柱富集和净化后,采用BEH C18色谱柱、甲醇和5 mmol/L乙酸铵水溶液作为流动相进行梯度洗脱,质谱采用多反应监测模式,内标法定量分析。14种PFCs在0.1~50 μg/L范围内线性关系良好,相关系数大于0.99,方法检出限和定量限分别为0.09~1.15 ng/L和0.29~3.85 ng/L。在2、10和20 ng/L加标水平下,8种PFCs的平均回收率为85.0%、120.2%和117.4%,平均相对标准偏差为9.2%、9.0%和6.6%,6种PFCs的回收率相对较低,主要由于其在瓶/管壁上的吸附作用导致。应用本方法分析某淡水湖水样,检出4种短链和5种长链PFCs,质量浓度为41.29~49.05 ng/L和98.43~111.02 ng/L。结果表明该方法适用于对环境水体中短链和长链PFCs的同时分析测定。     

Quantitative detection of trace perfluorinated compounds in environmental water samples by Matrix-assisted Laser Desorption/Ionization-Time of Flight Mass Spectrometry with 1,8-bis(tetramethylguanidino)-naphthalene as matrix

Determination of perfluorinated compounds (PFCs) is very important because of their potential hazards to the environment and human health. In present work, 1,8-bis (tetramethylguanidino)-naphthalene (TMGN), a superbasic proton sponge, was firstly employed as the matrix for quantitative detection of acidic PFCs in environmental water samples by Matrix-assisted Laser Desorption/Ionization-Time of Flight Mass Spectrometry (MALDI-TOF-MS). Several acidic PFCs, such as perfluorooctanesulfonate (PFOS) and perfluorooctanoic acid (PFOA), were selected as model analytes for demonstrating the feasibility of the detection method. The results showed that deprotonated ions of these PFCs were detected without any other matrix ions interference. The achieved sensitivity with TMGN for PFOS detection was ten-fold higher than that with 1,8-bis (dimethyl-amino)-naphthalene (DMAN) which was used for the detection of fatty acid by MALDI-TOF-MS. The high sensitivity of this method made it feasible to monitor and quantify acidic PFCs in complicated environmental water samples. Furthermore, a novel combined strategy of solid phase extraction (SPE) followed by MALDI-TOF-MS detection was developed for quantifying PFCs in environmental water samples. The calibration curves with a wide linear dynamic range (0.1-10 ng L⁻¹ for PFOS, PFHxS, and PFBS, and 0.5-50 ng L⁻¹ for PFOA, PFNA, and PFDA.) were obtained. The limit of detection (LOD) for PFOS of this method was 0.015 ng L⁻¹ (a signal-to-noise ratio of 3), which was lower than the LOD (0.036 ng L⁻¹) obtained by high-pressure liquid chromatography/tandem mass spectrometry (LC-MS/MS) method. Moreover, the strategy was used to detect the selected PFCs in water samples collected from Xiaoqinghe river and Gaobeidian wastewater. The achieved concentrations of PFCs were closed to those obtained by LC-MS/MS method. It is indicated that the proposed MALDI-TOF-MS method with TMGN as the matrix is much reliable and can be used as an alternative method to detect trace PFCs in environmental water samples.     

Novel contribution of chromatography in the development and analyses of metformin hydrochloride in biological and environmental samples

Globally, metformin hydrochloride (HCl) is the most commonly used antidiabetic drug and provides safe medication because of low risk of the side effects (lactic acidosis). Therefore, various researches have been established in pharmacodynamics and pharmacokinetic studies using various analytical applications such as calorimetry, spectrophotometry, and chromatography. But the chromatographic techniques are most widely used methods for the analysis of metformin HCl. This review discussed the different chromatographic methods used for the analysis of metformin HCl and its sample preparation for the isolation in different biological and environmental samples. Moreover, the mechanism for the fragmentation of ion products in LC–MS/MS is indicated for high throughput of the methods involved in the determination of metformin HCl in various sample matrices. The advancement in the chromatographic modalities provides the wide range of assays discussed herein.     

Extraction of perfluorinated compounds from food matrices using fluorous solvent partitioning

Perfluorinated compounds (PFCs) such as perfluorooctane sulfonic acid (PFOS) have emerged as a new class of global environmental pollutant; they bioaccumulate and are persistent in the environment and in wildlife. Fluorine-fluorine interactions have been investigated as a means to isolate PFCs for mass spectrometric quantification. A novel sample extraction and cleanup procedure has been developed for fat-containing samples based on fluorous liquid-liquid extraction (F-LLE) in a triphasic solvent system consisting of hybrid:fluorous:organic solvent (trifluoroethanol:perfluorohexane/dichloromethane-saturated with water). This system partially separates fluorous from non-fluorous compounds, allowing removal of co-extractants, which had previously resulted in liquid chromatography mass spectrometry (LC-MS/MS) peak suppression preventing low-level detection of PFCs. The developed F-LLE was coupled with an existing extraction protocol allowing the limits of detection of PFCs to be lowered an order of magnitude for high fat samples. The developed workflow was used to show the absence of a range of eleven PFCs in nine UK and one Irish cheese samples. This representative application demonstrates a new application of fluorous-organic extraction in sample cleanup for measurement of fluorinated analytes in food, environment and broader analytical chemistry.     

Comparison of palladium-magnesium nitrate and ammonium dihydrogenphosphate modifiers for cadmium determination in honey samples by electrothermal atomic absorption spectrometry

The occurrence of certain trace elements, such as cadmium, in honey bee can be considered as an indication of environmental pollution. In the present work, two methods for Cd determination in honey by electrothermal atomic absorption spectrometry, using palladium-magnesium nitrate and ammonium dihydrogenphosphate as chemical modifiers, have been developed. In none of these cases honey samples required pretreatment. Honey was diluted in water (20% w/v), and hydrogen peroxide, nitric acid, and Triton X-100 were added to minimize the matrix effect. For the first method, 21.6 μg of palladium and 4.5 μg of magnesium were added as chemical modifier; for the second method, 60 μg of ammonium dihydrogenphosphate were employed. The limits of detection obtained were 0.32 ng g⁻¹ for ammonium dihydrogenphosphate method and 0.54 ng g⁻¹ for palladium-magnesium nitrate method. The characteristic mass was 0.7 and 1.0 pg for ammonium dihydrogenphosphate and palladium-magnesium nitrate methods, respectively. The relative standard deviation (<10%) and the analytical recovery (98-105%) were comparable in both methods. The optimised methods were applied to the determination of the cadmium content in unpolluted Galician honey samples. Cd has been detected the analysed samples in the range (n.d.—4.3 ng g⁻¹).