Synthesis of bamboo-leaf-shaped ZnO nanostructures by oxidation of Zn/SiO2 composite films deposited with radio frequency magnetron co-sputtering

Bamboo-leaf-shaped ZnO nanostructures were synthesized by oxidation of metal Zn/SiO₂ matrix composite thin films deposited on Si(1 1 1) substrates with radio frequency magnetron co-sputtering. The synthesized bamboo-leaf-shaped ZnO are single crystalline in nature with widths ranging from 30 to 60 nm and lengths of up to 5-10 μm, room temperature photoluminescence spectrum of the nanostructures shows a strong and sharp UV emission band at 372 nm and a weak and broad green emission band at about 520 nm which indicates relatively excellent crystallization and optical quality of the ZnO nanostructures synthesized by this novel method.     

Substrate effects on ZnO nanostructure growth via nanoparticle-assisted pulsed-laser deposition

The effects of various substrate conditions on the morphology, crystal structure and photoluminescence of ZnO nanostructures synthesized by nanoparticle-assisted pulsed-laser ablation deposition were investigated. It is concluded that the sapphire substrate with a 1 h anneal at 1000 °C is the most favorable to the vertical growth of ZnO nanostructures. SEM analysis indicates that the well-aligned diameter-modulated ZnO nanonails with unique shape were successfully synthesized on the annealed sapphire substrate. The as-synthesized ZnO nanostructures exhibit an ultraviolet emission at around 390 nm and the absent green emission under room temperature, indicating that there is a very low concentration of deep-level defects inside ZnO lattices. The novel ZnO nanostructures could offer novel opportunities for both fundamental research and technological applications.     

Enhanced optical and field emission properties of CTAB-assisted hydrothermal grown ZnO nanorods

We have developed a simple N-cetyl-N,N,N-trimethyl ammonium bromide (CTAB)-assisted hydrothermal route for the production of ZnO one-dimensional (1D) nanostructures on zinc foil at reaction temperature of 160 °C. With the increase of CTAB concentration, the one-dimensional structures change from microrod to a mixture of nano- and microrod and finally to nanorods. X-ray diffraction studies confirmed the proper phase formation of the grown nanostructures. The room temperature photoluminescence spectra showed that ZnO nanostructures prepared with increased CTAB concentration exhibited enhanced band edge UV emission and also blue shift of the emission peak. All the samples show no defect related green emission. Field emission property of the 1D structures has been investigated in detail. By tuning the CTAB concentration, the field emission property was optimized. The nanorods synthesized with high CTAB showed turn-on and threshold fields of 3.2 and 5 V/μm, respectively, which are comparable to the values for vapour phase synthesized high field emitting ZnO nanostructures.     

Green photoluminescence from highly oriented ZnO thin film for photovoltaic application

We report here the fabrication of ZnO nanoparticles embedded on glass substrate by sol–gel and spin coating technique. Transmission electron microscope images revealed that the thin film is composed of ZnO nanoparticles. X-ray diffraction data confirms that the fabricated ZnO nanoparticles have hexagonal unit cell structure. The ZnO nanocrystals of the thin film are oriented along the c-axis of the hexagonal unit cell. UV–vis absorption spectroscopy shows that the absorption occurring at 373 nm in the ZnO thin film. The band gap was calculated from the absorption data and found to be 3.76 eV. This band gap enhancement occurs due to size effect in the nanoscale regime. Room temperature photoluminescence spectrum shows strong green emission at 530 nm owing to the singly ionized oxygen vacancy. This green emission was further investigated by annealing the thin film at different temperature. This singular green emission will be very useful in optoelectronic and nanophotonic devices.     

Investigation of the luminescence properties of ZnO tetrapods and clusters grown on Si substrates

ZnO nanostructures are formed on Si substrates using Zn powder without catalyst. The substrate temperature was controlled from 450 to 600 °C, and the variation of structural and optical properties was investigated. From all samples both ZnO tetrapods and clusters were observed. Among them, no significant dispersion was observed from the ZnO tetrapods. However, ZnO clusters show considerable change in density and size. From the energy dispersive X-ray spectroscopy (EDX) results, atomic composition difference was observed. The clusters have considerable O-deficiencies, while tetrapods have almost stoichiometric composition. From all samples, strong luminescence, UV emission at 3.21 eV and green emission at 2.5 eV, were observed at room temperature. Cathodoluminescence measurements showed that the UV emission is closely related with tetrapods and the green emission is dominated from the clusters.     

Effect of source temperature on the morphology and photoluminescence properties of ZnO nanostructures

ZnO nanostructures have been synthesized by heating a mixture of ZnO/graphite powders using the thermal evaporation and vapor transport on Si(1 0 0) substrates without any catalyst and at atmospheric argon pressure. The influence of the source temperature on the morphology and luminescence properties of ZnO nanostructures has been investigated. ZnO nanowires, nanoflowres and nanotetrapods have been formed upon the Si(1 0 0) substrates at different source temperatures ranging from 1100 to 1200 °C. Room temperature photoluminescence (PL) spectra showed increase green emission intensity as the source temperature was decreased and ZnO nanowires had the strongest intensity of UV emission compared with other nanostructures. In addition, the growth mechanism of the ZnO nanostructures is discussed based on the reaction conditions.     

The effect of morphology and doping on photoluminescence of ZnO nanostructures

In this work, optical properties of ZnO nanostructures prepared by chemical vapor deposition under different conditions were investigated. ZnO nanostructures were characterized by electron microscopy and photoluminescence. A high intensity green emission and a narrow UV emission band are observed in photoluminescence spectra of ZnO nanostructures related to the below-band-gap and band-edge that their intensities depend on the morphology of the nanostructures. It is considered that the green emission is originated from structural defects. In addition, the influence of thermal treatment and dopants such as iron and copper, on the photoluminescence (PL) properties of the ZnO nanostructures was investigated.     

Depth-resolved cathodoluminescence study of zinc oxide nanorods catalytically grown on p-type 4H-SiC

Optical properties of ZnO nanorods (NRs) grown by vapour-liquid-solid (VLS) technique on 4H-p-SiC substrates were probed by cathodoluminescence (CL) measurements at room temperature and at 5 K complemented with electroluminescence. At room temperature the CL spectra for defect related emission intensity was enhanced with the electron beam penetration depth. We observed a variation in defect related green emission along the nanorod axis. This indicates a relatively poor structural quality near the interface between ZnO NRs and p-SiC substrate. We associate the green emission with oxygen vacancies. Analysis of the low-temperature (5 K) emission spectra in the UV region suggests that the synthesized nanorods contain shallow donors and acceptors.     

Effect of the oxygen pressure on the microstructure and optical properties of ZnO films prepared by laser molecular beam epitaxy

A series of ZnO films were prepared on the Si (1 0 0) or glass substrate at 773 K under various oxygen pressures by using a laser molecular beam epitaxy system. The microstructure and optical properties were investigated through the X-ray diffraction, Raman spectrometer, scanning electron microscope, ultraviolet–visible spectrophotometer and spectrofluorophotometer. The results showed that ZnO thin film prepared at 1 Pa oxygen pressure displayed the best crystalinity and all ZnO films formed a columnar structure. Meanwhile, all ZnO films exhibited an abrupt absorption edge near the wavelength of 380 nm in transmission spectra. With increasing the oxygen pressure, the transmission intensity changed non-monotonically and reached a maximum of above 80% at 1 Pa oxygen pressure, based on which the band gaps of all ZnO films were calculated to be about 3.259–3.315 eV. Photoluminescence spectra indicated that there occurred no emission peak at a low oxygen pressure of 10⁻⁵ Pa. With the increment of the oxygen pressure, there occurred a UV emission peak of 378 nm, a weak violet emission peak of 405 nm and a wide green emission band centered at 520 nm. As the oxygen pressure increased further, the position of UV emission peak remained and its intensity changed non-monotonically and reached a maximum at 1 Pa. Meanwhile the intensity of green emission band increased monotonically with increasing the oxygen pressure. In addition, it was also found that the intensity of UV emission peak decreased as the measuring temperature shifted from 80 to 300 K. The analyses indicated that the UV emission peak originated from the combination of free excitons and the green emission band originated from the energy level jump from conduction band to O_Zn defect.     

Photoluminescence and Raman analysis of novel ZnO tetrapod and multipod nanostructures

Novel ZnO tetrapod and multipod nanostructures were successfully synthesized in bulk quantity through thermal evaporation method. The morphologies and structures of the ZnO nanostructures were characterized by scanning electron microscopy, X-ray diffraction and transmission electron microscopy. The results revealed that the ZnO nanostructures consisted of tetrapods and multipods with tower-like legs. The ZnO nanostructures were of high purity and were well crystallized with wurtzite structure. The preferred growth direction of legs was found to be the [0 0 0 1] direction. Possible growth mechanisms were proposed for the formation of the ZnO nanostructures. Room temperature photoluminescence (PL) spectra showed that the as-synthesized ZnO nanostructures had a strong green emission centered at 495 nm and a weak ultraviolet emission at 383 nm. Raman spectroscopy was also adopted to explore the structural quality of the ZnO nanostructures.     

Effects of annealing temperature on morphologies and optical properties of ZnO nanostructures

The effects of annealing temperature on the morphologies and optical properties of ZnO nanostructures synthesized by sol–gel method were investigated in detail. The SEM results showed that uniform ZnO nanorods formed at 900 C. The PL results showed an ultraviolet emission peak and a relatively broad visible light emission peak for all ZnO nanostructures sintered at different temperature. The increase of the crystal size and decrease of tensile stress resulted in the UV emission peak shifted from 386 to 389 nm when annealing temperature rose from 850 to 1000 C. The growth mechanism of the ZnO nanorods is discussed.     

The effect of substrate surface roughness on ZnO nanostructures growth

The ZnO nanowires have been synthesized using vapor-liquid-solid (VLS) process on Au catalyst thin film deposited on different substrates including Si(1 0 0), epi-Si(1 0 0), quartz and alumina. The influence of surface roughness of different substrates and two different environments (Ar + H₂ and N₂) on formation of ZnO nanostructures was investigated. According to AFM observations, the degree of surface roughness of the different substrates is an important factor to form Au islands for growing ZnO nanostructures (nanowires and nanobelts) with different diameters and lengths. Si substrate (without epi-taxy layer) was found that is the best substrate among Si (with epi-taxy layer), alumina and quartz, for the growth of ZnO nanowires with the uniformly small diameter. Scanning electron microscopy (SEM) reveals that different nanostructures including nanobelts, nanowires and microplates have been synthesized depending on types of substrates and gas flow. Observation by transmission electron microscopy (TEM) reveals that the nanostructures are grown by VLS mechanism. The field emission properties of ZnO nanowires grown on the Si(1 0 0) substrate, in various vacuum gaps, were characterized in a UHV chamber at room temperature. Field emission (FE) characterization shows that the turn-on field and the field enhancement factor (β) decrease and increases, respectively, when the vacuum gap (d) increase from 100 to 300 μm. The turn-on emission field and the enhancement factor of ZnO nanowires are found 10 V/μm and 1183 at the vacuum gap of 300 μm.     

Photoluminescence properties of various CVD-grown ZnO nanostructures

We have studied systematically room-temperature photoluminescence (PL) properties of many nanostructured ZnO samples grown by chemical vapour deposition (CVD). Their PL spectra consist of two emissions peaked in the ultraviolet (UV) and green regions. The relative intensity of these emissions depends on the excitation energy density, size and morphology of ZnO nanostructures. Based on the excitation-density dependence of the integrated intensity ratio of UV-to-green emission, we could classify PL spectra of ZnO nanostructures into three groups characteristic of size and morphology. Our study also reveals that with increasing excitation density, the UV-peak position shifts slightly towards longer wavelengths while the green emission around 514-520 nm is almost unchanged. This green-luminescence emission is dominant when the nanostructure sizes range from 20 to 200 nm, which is related to a large surface-to-volume ratio.     

Influence of Sb in synthesize of ZnO nanowire using sandwich type substrate in carbothermal evaporation method

The paper deals with synthesis of Sb doped ZnO nanowire by considering Si coated with Sb and Au as substrate using carbothermal evaporation method. The horizontally oriented Sb doped ZnO nanowires with a diameter of 1 μm synthesized at 900 °C, which is quite high as compared to the Pure ZnO nanowires generated without the influence of Sb at 900 °C. The nanowire synthesized at 900 °C showed a measurable lower angle of about 0.06° from XRD and suppression of A₁T and E₁(L0) modes in Raman spectroscopic, this confirms the incorporation of Sb in ZnO lattice. The strong exciton emission and weak deep-level emission from room temperature PL and Strong emission attributed to the radiant recombination from neutral-acceptor-bound exciton (A⁰X) peak accompanied by two strong and broad emission of donor acceptor pair (DAP) from low temperature PL, this confirms the use of Sb as an acceptor for ZnO.     

Co与Cu掺杂ZnO薄膜的制备与光致发光研究

采用溶胶-凝胶旋涂法在玻璃衬底上制备了Co, Cu单掺杂及Co,Cu共掺杂ZnO薄膜.用金相显微镜观察了Co与Cu掺杂对ZnO薄膜形貌的影响.X射线衍射（XRD）研究揭示所有ZnO薄膜样品都存在（002）择优取向,在Cu单掺的ZnO薄膜中晶粒尺寸最大.对所有样品的室温光致发光测量都观察到较强的蓝光双峰发射和较弱的绿光发射,其中长波长的蓝光峰和绿光峰都能够通过掺杂进行控制.对不同掺杂源的ZnO薄膜发光性能进行了分析,认为蓝光峰来源于电子由导带底到锌空位能级的跃迁及锌填隙到价带顶的跃迁,绿光峰是由于掺杂造成的 关键词： ZnO薄膜 溶胶-凝胶 Co Cu掺杂 光致发光     

Photoluminescence and absorption in sol-gel-derived ZnO films

Highly c-axis-oriented ZnO films were obtained on corning glass substrate by sol-gel technique. The characteristics of photoluminescence (PL) of ZnO, as well as the exciton absorption in the absorption (UV) spectra are closely related to the post-annealing treatment. The difference between PL peak position and the absorption edge, designated as Stokes shift, is found to decrease with the increase of annealing temperature. The minimum Stokes shift is about 150 meV. The decrease of Stokes shift is attributed to the decrease in carrier concentration in ZnO film with annealing. X-ray diffraction, surface morphology and refractive index results indicate an improvement in crystalline quality with annealing. Annealed films also exhibit a green emission centered at ∼520 nm with activation energy of 0.89 eV. The green emission is attributed to the electron transition from the bottom of the conduction band to the antisite oxygen O_Zn defect levels.     

Influence of annealing temperature on the photoluminescence properties of ZnO quantum dots

The properties of ZnO quantum dots (QDs) synthesized by the sol-gel process are reported. The primary focus is on investigating the origin of the visible emission from ZnO QDs by the annealing process. The X-ray diffraction results show that ZnO QDs have hexagonal wurtzite structure and the QD diameter estimated from Debye-Scherrer formula is 8.9 nm, which has a good agreement with the results from transmission electron microscopy images and the theoretical calculation based on the Potential Morphing Method. The room-temperature photoluminescence spectra reveal that the ultraviolet excitation band has a red shift. Meanwhile, the main band of the visible emission shifts to the green luminescence band from the yellow luminescence one with the increase of the annealing temperature. A lot of oxygen atoms enter into Zn vacancies and form oxygen antisites with increasing temperature. That is probably the reason for the change of the visible emission band.     

Synthesis and characterization of ZnO nano/microfibers thin films by catalyst free solution route

Zinc oxide (ZnO) nano/microfibrous thin films were successfully synthesized by a catalyst free solution route on glass and Si substrates. X-ray diffraction study revealed the formation of ZnO nanofibers of hexagonal crystalline structure. The texture coefficient of different planes varied with annealing temperature and that of the (0 0 2) plane was the highest for films annealed at temperature 873 K. Scanning electron micrograph showed the well formation of ZnO nano/microfibers with an average diameter 500 nm and having an average aspect ratio 150. UV–Vis–NIR spectroscopic study for the films deposited on glass substrates showed the high transmittance in the visible and near-infrared region. It was also observed that the band gap energy decreased as the films were annealed at higher temperature. The band gap energies of nanostructured ZnO thin films were determined to be in the range 3.03–3.61 eV. The photoluminescence study showed an UV emission peak at 397 nm, a visible blue–green emission peak at 468 nm and a green emission peak at 495 nm. Field emission properties of nanofiber ZnO thin film showed considerably low turn-on field around 1.4 V/μm. The emission current was as high as 70 μA at the field of 3.6 V/μm.     

Controlled growth and field emission properties of zinc oxide nanopyramid arrays

Single-crystalline, pyramidal zinc oxide nanorods have been synthesized in a large quantity on p-Si substrate via catalyst-free thermal chemical vapor deposition at low temperature. SEM investigations showed that the nanorods were vertically aligned on the substrate, with diameters ranging from 60 to 80 nm and lengths about 1.5 μm. A self-catalysis VLS growth mechanism was proposed for the formation of the ZnO nanorods. The field emission properties of the ZnO nanopyramid arrays were investigated. A turn-on field about 3.8 V/μm was obtained at a current density of 10 μA/cm², and the field emission data was analyzed by applying the Fowler-Nordheim theory. The stability of emission current density under a high voltage was also tested, indicating that the ZnO nanostructures are promising for an application such as field emission sources.     

Synthesis, characterization and optical properties of multipod ZnO whiskers

Multipod ZnO whiskers were synthesized successfully by two steps: pulsed laser deposition (PLD) and thermal evaporation process. First, a thin layer of Zn films were deposited on Si(1 1 1) substrates by PLD. Then the whiskers grew on Zn-coated Si(1 1 1) substrate by the simple thermal evaporation oxidation of the metallic zinc powder at 900 °C in the air without any catalysts or additives. The pre-deposited Zn films by PLD on the substrate can promote the growth of ZnO multipod whiskers effectively. The as-synthesized ZnO whiskers were characterized by using X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and high-resolution transmission electron microscopy (HRTEM). The results revealed that the whiskers are highly crystalline with the wurtzite hexagonal structure. Room temperature photoluminescence (PL) spectrum of the whiskers shows a UV emission peak at ∼393 nm and a broad green emission peak at ∼517 nm, which was assigned to the near band-edge emission and the deep-level emission, respectively.