Stereoselective reactions. XXXIIII. Design and synthesis of chiral bidentate amines having a bulky group on the chiral carbon

Based on the solution structures of chiral bidentate lithium amides ((R)-3a,b) having a phenyl group on the chiral carbon, chiral bidentate amines ((R)-5a,b-8a,b and (S)-9a,b) having a bulkier group instead of a phenyl group on the chiral carbon were designed and synthesized.     

Stereoselective reactions. XXXII. Enantioselective deprotonation of 4-tert-butylcyclohexanone by fluorine-containing chiral lithium amides derived from 1-phenylethylamine and 1-(1-naphthyl)ethylamine

Enantioselective deprotonation of 4-tert-butylcyclohexanone was examined using 1-phenylethylamine- and 1-(1-naphthyl)ethylamine-derived chiral lithium amides having an alkyl or a fluoroalkyl substituent at the amide nitrogen. The lithium amides having a 2,2,2-trifluoroethyl group on the amide nitrogen are easily accessible in both enantiomeric forms, and were found to induce good enantioselectivity in the present reaction.     

Enantioselective radical cyclisation reactions of 4-substituted quinolones mediated by a chiral template

Six 4-substituted quinolones 6-8, which bear an ω-iodoalkyl chain, were prepared and subjected to reductive radical cyclisation conditions employing BEt(3)/O(2) as the initiator and either Bu(3)SnH or TMS(3)SiH as hydride source. 4-(4-Iodobutyl)-quinolone (6a) and 4-(3-iodopropylthio)-quinolone (8a) gave the respective 6-endo-cyclisation products in good yields. 4-(3,3-Dimethyl-4-iodobutyl)-quinolone (6b) cyclised in a 5-exo-fashion, while the other substrates delivered only reduction products. The cyclisation reactions could be conducted in the presence of a chiral template (1) with high enantiomeric excess (94-99% ee). The association behaviour of substrate 6a to 1 was studied by NMR titration experiments. In the enantioselective cyclisation of 6b a significant nonlinearity was observed when comparing the product ee with the ee of the template.     

Enantioselective intramolecular [2+2] photocycloaddition reactions of 4-substituted coumarins catalyzed by a chiral Lewis acid

Eight coumarins, which carry a terminal alkene tethered by a CH(2)XCH(2) group to their 4-position (X = CH(2), CMe(2), O, S, NBoc, NZ, NTs, NBn), were synthesized in overall yields of 51-80?%. Starting materials for the syntheses were either commercially available 4-hydroxycoumarin or 4-formylcoumarin. The intramolecular [2+2] photocycloaddition of these coumarins gave diastereoselectively products with a tetracyclic 3,3a,4,4a-tetrahydro-1H-cyclopenta[2,3]cyclobuta[1,2-c]chromen-5(2H)-one skeleton. Direct irradiation at λ = 300?nm in dichloromethane (c = 10?mM) led to product formation in good yields for most substrates, presumably via a singlet excited state intermediate. Due to the low coumarin absorption at λ >350?nm the photocycloaddition was slow upon irradiation at λ = 366?nm. Addition of a chiral oxazaborolidine-based Lewis acid (50?mol?%) increased the reaction rate at λ = 366?nm and induced a significant enantioselectivity in the [2+2] photocycloaddition. Six out of eight coumarin substrates (X = CH(2), CMe(2), O, NBoc, NZ, NTs) gave the respective products in yields of 72-96?% and with 74-90?% enantiomeric excess (ee) upon irradiation in dichloromethane (c = 20?mM) at -75?°C. The Lewis acid presumably acts by coordination to the coumarin carbonyl oxygen atom, which leads to a bathochromic shift (redshift) of the UV absorption and which increases the singlet state lifetime. A second electrostatic interaction of the hydrogen atom at C3 with the oxygen atom of the oxazaborolidine is likely.     

Enantioselective intramolecular [2 + 2]-photocycloaddition reactions of 4-substituted quinolones catalyzed by a chiral sensitizer with a hydrogen-bonding motif

Six 2-quinolones, which bear a terminal alkene linked by a three- or four-membered tether to carbon atom C4 of the quinolone, were synthesized and subjected to an intramolecular [2 + 2]-photocycloaddition. The reaction delivered the respective products in high yields (78-99%) and with good regioselectivity in favor of the straight isomer. If conducted in the presence of a chiral hydrogen-bonding template (2.5 equiv) at low temperature in toluene as the solvent, the reaction proceeded enantioselectively (83-94% ee). An organocatalytic reaction was achieved when employing a chiral hydrogen-bonding template with an attached sensitizing unit (benzophenone or xanthone). The xanthone-based organocatalyst proved to be superior as compared to the respective benzophenone. Closer inspection revealed that the reaction of 4-(pent-4-enyloxy)quinolone leading to a six-membered ring, annelated to the cyclobutane, was less enantioselective (up to 41% ee with 30 mol % catalyst) than the reaction of 4-(but-3-enyloxy)quinolone leading to a five-membered ring (90% ee with 5 mol % and 94% ee with 20 mol % catalyst). Photophysical data (emission spectra, laser flash photolysis experiments) proved that the latter photocycloaddition was significantly faster, supporting the idea that the dissociation of the substrate from the catalyst prior to the photocycloaddition is responsible for the decreased enantioselectivity. Under optimized conditions, employing 10 mol % of the xanthone-based organocatalyst at -25 °C in trifluorotoluene as the solvent, three of the other four substrates gave the intramolecular [2 + 2]-photocycloaddition products with high enantioselectivities (72-87% ee). In all catalyzed reactions, the yields based on conversion were moderate to good (40-93%).     

Enantioselective alkylation of lactams and lactones via lithium enolate formation using a chiral tetradentate lithium amide in the presence of lithium bromide

Enantioselective alkylation of lactams and lactones can be realized up to 98% ee by deprotonation with a chiral tetradentate lithium amide (4b) in the presence of lithium bromide, and subsequent alkylation with active alkylating agents in non-chelating solvents.     

Organic reactions in chiral micelles: 7. The structural effects on the asymmetric oxidation of prochiral sulfides in chiral micelles

A variety of phenyl alkyl sulfides were oxidized enantioselectively with NaIO₄ in chiral micellar systems formed from eight chiral surfactants, to give optical active sulfoxides. The enantiomer excesses ranged from 1.6 to 15.0%. To understand the mechanistic detail of this asymmetric oxidation in chiral micelle, the effects of structure both in substrates and surfactants on the optical yield of the oxidation were studied and discussed. Generally, increasing the alkyl chain length both in surfactants and in substrates enhances the optical yield, also the surfactant with hydroxy group at its appropriate position gives better enantioselectivity, suggesting the enzymic characteristics of the chiral micelle.     

Probing chiral selective reactions using a revised Kataura plot for the interpretation of single-walled carbon nanotube spectroscopy

Raman spectroscopy on surfactant-dispersed, aqueous suspensions of single-walled carbon nanotubes is used to verify the energies of interband transitions and validate the spectral assignments of semiconducting and metallic nanotubes determined by spectrofluorimetry for the former and Raman excitation profiles for the latter. The results are compiled into an experimentally based mapping of transition versus nanotube diameter to revise those previously employed using single-electron theoretical treatments. Because this mapping provides the transitions associated with a precise chiral wrapping of a particular nanotube, it allows the monitoring of reaction pathways that are selective to the nanotube chirality vector. This is demonstrated using a model electron-transfer reaction of 4-chlorobenzenediazonium shown to be selective for metallic over semiconducting carbon nanotubes via charge-transfer stabilization of complexes at the surfaces of the former.     

Synthetic studies on maitotoxin. 1. Stereoselective synthesis of the C'D'E'F'-ring system having a side chain

The stereoselective synthesis of the maitotoxin C'D'E'F'-ring system having a side chain has been accomplished through a convergent strategy. The key reactions include Horner-Wadsworth-Emmons coupling of the C'D'E'-ring and the side chain and subsequent construction of the F'-ring by silane reduction of dihydropyran.     

Synthesis of 1-substituted (S)-4-acetoxy-1-penten-3-ones using (S)-lactic acid as a chiral source and their synthetic reactions

Ylide reaction of (S)-3-acetoxy-1-triphenylphosphoranylidene-2-butanone, derived from (S)-lactic acid, with aldehydes gives 1-substituted (S)-4-acetoxy-1-penten-3-one derivatives, which are shown to be transformed into useful chiral compounds by stereoselective reduction or the Johnson-Claisen rearrangement.     

Synthesis of N-(3- and 4-substituted phenyl)-O-isobutyl thionocarbamates from O-isobutyl xanthate and amines using a nano-platinum multi-walled carbon nanotube catalyst

Abstract  

Twelve N-(3- and 4-substituted phenyl)-O-isobutyl thionocarbamates, eight of which are novel, were synthesized from O-isobutyl xanthate and 3- and 4-substituted anilines in the presence of a nano-platinum aminophenyl modified multi-walled carbon nanotube catalyst. The nano-Pt catalyst was prepared on a carbon nanotube support modified by diazotization, nitro group reduction, and subsequent microwave-assisted nano-Pt precipitation. The catalyst was characterized by Fourier transform infrared (FT-IR) spectroscopy, elemental analysis, thermogravimetric analysis, and transmission electron microscopy. The nano-platinum/modified carbon nanotube catalyst was compared with a commercial Pt/active carbon catalyst in terms of product purity and yield. The results obtained by the use of the catalysts were additionally compared with those obtained by reaction of sodium isobutyl xanthogenacetate and 3- and 4-substituted anilines. Full structure characterization of the synthesized N-(substituted phenyl)-O-isobutyl thionocarbamates was achieved using FT-IR, ¹H and ¹³C NMR, and mass spectrometric methods, and their purity was proved by elemental analysis and gas chromatography. The new catalytic method offers advantages over the commercial method, such as higher yields and no product purification is required, thus conforming to the principles of ecologically friendly syntheses.     

Nucleosides and nucleotides. 186. Synthesis and biological activities of pyrimidine carbocyclic nucleosides with a hydroxyamino group instead of a hydroxymethyl group at the 4'-position of the sugar moiety.

Pyrimidine carbocyclic nucleosides with a hydroxyamino group instead of a hydroxymethyl group at the 4'-position of the sugar moiety were designed as potential antitumor and/or antiviral agents. Pd (O)-catalyzed reactions of enantiomerically pure (+)-(1R,4S)-4-[(tert-butyldiphenylsilyl)oxy]-1-(ethoxycarbonylo xy)-2- cyclopentene (9) with N3-benzoylthymine and -uracil gave carbocyclic nucleosides 10 and 11. Subsequent Pd (O)-catalyzed reactions of N3-benzoyl-1-[(1R,4S)-4-(ethoxycarbonyloxy)-2-cyclopenten-1- yl]thymine (14) and -uracil (15) with O-benzylhydroxylamine smoothly gave the hydroxyamino-substituted carbocyclic nucleosides 16 and 17. From these nucleosides, the target compounds were prepared after deprotection or further reactions. The 2',3'-didehydro-2',3'-dideoxythymidine (D4T) analogue 20 was the most effective compound, with IC50 values of 27.3 and 34.5 microM against KB and L1210 cells in vitro. Carbocyclic analogues of uridine and cytidine (29 and 32) were less effective than 20 against both cell lines.     

Structural effects on the antitumour activity of a series of di(4-substituted phenyl)tin dichloride complexes with nitrogen-donor ligands

Investigation of the antitumour activity of a series of diorganotin dichloride complexes (4-ZC₆H₄)₂SnCl₂·L₂, where Z = OMe, Me, F, Cl, and CF₃ and L₂ = 2,2′-bipyridyl (bipy), 1,10-phenanthroline (phen) and 2-aminomethylpyridine (amp) is reported. A number of these complexex are shown to exhibit reproducible activity in vivo towards P388 lymphocytic leukaemia in mice. ¹H NMR data are reported for an extended series of (4-ZC₆H₄)₄Sn and the parent dichlorides (4-ZC₆H₄)₂SnCl₂ of the above-mentioned complexes. A correlation is reported between Hammett substituent constants and ¹H chemical shift data. Attempts are made to relate the antitumour activity of the complexes to various structural factors. The dependence of antitumour activity on the electronic effect of group Z and the nature of the ligand L₂ is demonstrated.     

(Sensitized) photolysis of diazonium salts as a mild general method for the generation of aryl cations. Chemoselectivity of the singlet and triplet 4-substituted phenyl cations

The photolysis of a series of 4-X-benzenediazonium tetrafluoroborates is studied in MeCN. Loss of nitrogen occurs from the singlet excited state with X=H, t-Bu, and NMe2 and leads to the singlet aryl cation. This adds to the solvent yielding the corresponding acetanilides. With other substituents, ISC competes with (X=Br, CN) or overcomes (X=COMe, NO2) fragmentation and the aryl cation is formed in part or completely in the triplet state. In neat MeCN, this either abstracts hydrogen from the solvent (in most cases inefficiently) or undergoes intersystem crossing to the more stable singlet that reacts as above. In the presence of pi nucleophiles (allyltrimethylsilane or benzene), the triplet aryl cation is efficiently trapped giving substituted allylbenzenes and biphenyls, respectively. By triplet sensitization by xanthone, the triplet cation and the products from it are obtained from the whole series considered. The direct or sensitized photodecomposition of diazonium fluoroborates, substituted with both electron-donating and -withdrawing substituents, in the presence of alkenes and arenes offers an access to an alternative arylation procedure.     

Stereoselective synthesis of (R)-10-methyltridecan-2-one,the sex pheromone of the southern corn rootworm,using (4S)-benzylthiazolidinethione as a chiral auxiliary

The stereoselective synthesis of (R)-10-methyltridecan-2-one, the sex pheromone of the southern corn rootworm, was carried out in 20.7% overall yield based on (4S)-benzylthiazolidinethione (five steps). In the crucial step, the stereogenic center was generated by an asymmetric Michael addition using enantiomerically pure (4S)-benzylthiazolidinethione as a chiral auxiliary.     

Towards understanding the effects of carbon and nitrogen-doped carbon coating on the electrochemical performance of Li4Ti5O12 in lithium ion batteries: a combined experimental and theoretical study

We investigate the effects of carbon coating, with and without nitrogen-dopants, on the electrochemical performance of a promising anode material Li(4)Ti(5)O(12) (LTO) in lithium ion battery applications. The comparative experimental results show that LTO samples coated with nitrogen-doped carbon derived from pyridine and an ionic liquid exhibit significant improvements in rate capability and cycling performance compared with a LTO sample coated by carbon derived from toluene and the pristine LTO sample. For the first time, we construct an atomistic model for the interface between the lithium transition metal oxide and carbon coating layers. Our first-principles calculations based on density functional theory reveal that at this interface there is strong binding between the graphene coating layer and the Ti-terminated LTO surface, which significantly reduces the chemical activity of LTO surfaces and stabilizes the electrode/electrolyte interface, providing a clue to solve the swelling problem for LTO-based batteries. More importantly, electron transfer from the LTO surface to graphene greatly improves the electric conductivity of the interface. Nitrogen-dopants in graphene coatings further increase the interfacial stability and electric conductivity, which is beneficial to the electrochemical performance in energy storage applications.     

A new class of chiral pyrrolidine for asymmetric Michael addition reactions. New mechanism via simple 4+2 type attack of the enamine on the trans-nitrostyrene

A new chiral organocatalyst is described in this paper. A new mechanism for the overall Michael condensation of ketones with nitroolefins using our catalyst is suggested based on molecular modelling studies.     

Adding a new dimension to the investigation of platinum-mediated arene C-H activation reactions using 2D NMR exchange spectroscopy. Dynamics of Pt(II) phenyl/benzene site exchange

Protonation of (N-N)PtPh(2) (1; N-N = diimine ArN=CMe-CMe=NAr with Ar = 2,6-Me(2)C(6)H(3) (a), 2,4,6-Me(3)C(6)H(2) (b), 4-Br-2,6-Me(2)C(6)H(2) (c), 3,5-Me(2)C(6)H(3) (d), and 4-CF(3)C(6)H(4) (e)) in the presence of MeCN at ambient temperature generates (N-N)Pt(Ph)(NCMe)(+) (2). At -78 degrees C, protonation of 1a yielded (N-N)PtPh(2)(H)(NCMe)(+) (3a), which produced benzene and 2a at ca. -40 degrees C. Protonation of 1a-e in CD(2)Cl(2)/Et(2)O-d(10) furnished (N-N)Pt(C(6)H(5))(eta(2)-C(6)H(6))(+) (4a-e). The pi-benzene complexes 4a-c, sterically protected at Pt, eliminate benzene at ca. 0 degree C. The sterically less protected 4d-e lose benzene already at -30 degrees C. SST and 2D EXSY NMR demonstrate that phenyl and pi-benzene ligand protons undergo exchange with concomitant symmetrization of the diimine ligand, most likely via oxidative insertion of Pt into a C-H bond of coordinated benzene. The kinetics of the exchange processes for 4a-c were probed by quantitative EXSY spectroscopy, resulting in DeltaH() of 70-72 kJ mol(-1) and DeltaS of 37-48 J K(-1) mol(-1). A large, strongly temperature-dependent H/D kinetic isotope effect (9.7 at -34 degrees C; 6.9 at -19 degrees C) was measured for the dynamic behavior of 4a versus 4a-d(10), consistent with the proposed pi-benzene C-H bond cleavage. The fact that the pi-benzene complex 4a is thermally more robust in the absence of MeCN than is the Pt(IV) hydridodiphenyl complex 3a in the presence of MeCN agrees with the notion that arene elimination from Pt(IV) hydridoaryl complexes occurs via Pt(II) pi-arene intermediates that eliminate the hydrocarbon associatively, in this case, promoted by MeCN. Compounds 1a, 1b, 1d, 2a, and 2b have been crystallographically characterized.     

When a truck becomes a motorcycle: the impact of sample load on a chiral capillary electrophoresis separation using mixtures of neutral and sulfated cyclodextrins.

Chiral capillary electrophoresis (CE) separations are useful for monitoring the presence of a minor isomer at low levels (e.g., <0.5%) in the presence of the major form. In order to quantitate these low levels, it is necessary to inject large amounts of sample. Separations which appear to have more than enough resolution ("big enough to drive a truck through) for dilute, equal-concentration mixtures of isomers can become inadequately resolved when the necessary amount of sample is injected. This paper addresses some important considerations in maintaining adequate resolution at high sample loads for chiral separations involving a dual-cyclodextrin (CD) system. For hydrophobic compounds, the use of both a neutral and a sulfated CD can be helpful in achieving a chiral separation. In such a system, the migration time and resolution can be controlled by varying the ratio of neutral to charged CD concentrations. It is demonstrated here that not only the ratio, but also the total CD concentration can significantly affect the separation. In this paper, the impact of the total CD concentration in a dual-CD system (with the concentration ratio constant) is examined with respect to peak shape and resolution. The influences of temperature, capillary diameter, and current are also considered. The corresponding impact on the amount of sample which can be loaded and successfully separated determines the limit of quantitation of the minor isomer. Thus, this information is important in making such chiral separations applicable to determinations of low levels of minor isomer in the presence of large amounts of the major form.