固-液相变贮能材料的研究进展

固-液相变贮能材料具有贮能密度大、相变温度恒定、体积变化小等优点，已成为能源开发利用和材料科学研究的新热点。综述了固-液相变贮能材料的研究现状，介绍了其分类及各类材料贮能性能，并总结了其应用上的缺陷及解决方法。     

纳米复合相变材料固液相变储能过程研究进展

对纳米复合相变材料固液相变储能过程的若干最新研究进行了回顾,从相变储能系统的动态性能和典型的凝固、熔化传热过程两方面总结了相关研究的进展,并重点评述了数值模拟研究中纳米复合相变材料有效热物性预测方法的适用性及其与实验结果之间的偏差,最后对纳米复合相变材料固液相变储能过程的未来发展和重点研究方向进行了展望。     

Dynamics of energy storage in phase change drywall systems

Experimental evaluations of manufactured samples of laminated and randomly mixed phase change material (PCM) drywalls have been carried out and compared with numerical results. The analysis showed that the laminated PCM drywall performed thermally better. Even though there was a maximum 3% deviation of the average experimental result from the numerical values, the laminated PCM board achieved about 55% of the phase change process as against 48% for the randomly distributed drywall sample. The laminated board sample also released about 27% more latent heat than the randomly distributed type at the optimum time of 90 min thus validating previous simulation study. Given the experimental conditions and assumptions the experiment has proved that it is feasible to develop the laminated PCM technique for enhancing and minimising multi‐dimensional heat transfers in drywall systems. Further practical developments are however encouraged to improve the overall level of heat transfer. Copyright © 2005 John Wiley & Sons, Ltd.     

PolyHIPE composite based-form stable phase change material for thermal energy storage

A novel shape-stabilized n-hexadecane/polyHIPE composite phase change material (PCM) was designed and thermal energy storage properties were determined. Porous carbon-based frameworks were produced by polymerization of styrene-based high internal phase emulsions (HIPEs) in existence of the surface modified montmorillonite nanoclay. The morphological and mechanical properties of the obtained polyHIPEs were investigated by scanning electron microscopy analysis and the compression test, respectively. The polyHIPE composite with the best pore morphology and the highest compression modulus was determined as a framework to prepare the form stable n-hexadecane/polyHIPE composite phase change material using the one-step impregnation method. The chemical structure and morphologic property of composite PCM was investigated by FT-IR and polarized optical microscopy analysis. Thermal stability of the form-stable PCM (FSPCM) was examined by TG analysis. The n-hexadecane fraction engaged into the carbon foam skeleton was found of as 55 wt% from TG curve. differential scanning calorimetry analysis was used for determining melting temperature and latent heat storage capacity of FSPCM and these values were determined as (26.36°C) and (143.41 J/g), respectively. The results indicated that the obtained composite material (FSPCM) has a considerable potential for low temperature (18°C-30°C) thermal energy storage applications with its thermal energy storage capacity, appropriate phase change temperatures and high thermal stability.     

管壳式相变储能换热器的优化设计

叙述了利用优化设计理论对管壳式相变储能换热器进行优化设计的方法。以该装置的成本为优化目标,储热量,放热时间,传热量,加工和防腐要求作为约束条件,得出了最佳的管子半径,厚度及管子根数,并给出了一个计算实例。     

Modification of the phase change transfer model for underwater vehicles: A molecular dynamics approach

The thermophysical properties of phase change material (PCM) directly affect the performance of underwater vehicles. The accuracy of the phase change transfer model is an important index for evaluating the performance of PCM as well. In this paper, a molecular dynamics approach is proposed to obtain the thermophysical properties of PCM under different pressures. On such a basis, the modified models of “temperature-pressure-density,” “temperature-pressure-thermal conductivity” and “pressure-specific heat capacity” are established. By comparing the simulation results with the unmodified phase change transfer model and the laboratory experimental results, it can be seen that the modified phase change transfer model has higher accuracy. Furthermore, an ocean thermal energy conversion system for underwater vehicles is deployed in the South China Sea to test the utilization performance. By the contrast between the simulated calculation of the modified model and the sea trial results, it is found that the root mean square (RMS) of accumulator pressure between the simulation and sea trial is 0.2565, and the energy storage volume RMS is 1.6868. When the accumulator pressure reaches 205 bar, the time error is 0.58%, and the energy storage volume error is 3.16%. The results indicate that the modified model is effective in practical application.     

Recent progress about expanded graphite matrix composite phase change material for energy storage

膨胀石墨基复合相变材料具有导热系数高,储能密度大以及相变过程无液体泄漏等优点,是近年来储能科学领域的研究热点.本文探讨了应用于储热系统的相变材料的性能及分类,并对膨胀石墨及其复合相变材料的制备方法进行了简要分析,最后综述了石蜡类,脂肪酸类,共晶混合物类,聚乙二醇以及乙酰胺等膨胀石墨基复合相变材料的国内外研究进展.     

相变蓄冷装置内传热及相变特性研究

建立了三种不同蓄冷球球径堆叠方式的相变蓄冷装置模型,对其进行了数值模拟以研究其内部传热及相变特性。结果表明：随着流速的提高、蓄冷球直径的减小,蓄冷结束后三种方案中装置内蓄冷球的凝固率提升显著;双球径方案与单球径方案装置内蓄冷球凝固率随时间变化的规律在蓄冷过程初段相类似,但两方案中相同球径部分蓄冷球相变结束,双球径方案中发生相变的蓄冷球由大直径转变为小直径时,其凝固率随时间变化的速度逐渐超过单球径方案。该研究可为相变蓄冷装置的实际设计及性能优化提供参考     

Thermal performance of phase change material energy storage floor for active solar water-heating system

The conventional active solar water-heating floor system contains a big water tank to store energy in the day time for heating at night, which takes much building space and is very heavy. In order to reduce the water tank volume or even cancel the tank, a novel structure of an integrated water pipe floor heating system using shape-stabilized phase change materials (SSPCM) for thermal energy storage was developed and experimentally studied in this paper. The thermal performances of the floors with and without the SSPCM were compared under the intermittent heating condition. The results show that the Energy Storage Ratio (ESR) of the SSPCM floor is much higher than that of the non-SSPCM floor; the SSPCM floor heating system can provide stable heat flux and prevent a large attenuation of the floor surface temperature. Also, the SSPCM floor heating system dampens the indoor temperature swing by about 50% and increases the minimum indoor air temperature by 2°C–3°C under experimental conditions. The SSPCM floor heating system has a potential of making use of the daytime solar energy for heating at night efficiently.     

Microencapsulation of coco fatty acid mixture for thermal energy storage with phase change material

Thermal energy storage systems provide several alternatives for efficient energy use and energy conservation. Microcapsules of natural coco fatty acid mixture were prepared to be used as phase change materials for thermal energy storage. The coacervation technique was used for the microencapsulation process. Several alternatives for the capsule wall material were tried. The microcapsules were characterized according to their geometric profiles, phase transition temperatures, mean particle sizes, chemical stabilities, and their thermal cycling. The diameters of microcapsules prepared in this study were about 1 mm. Coco fatty acid mixtures have kept their geometrical profiles even after 50 thermal cycles for melting and freezing operations in temperature range from 22 to 34°C. It was found that gelatin+gum Arabic mixture was the best wall material for microencapsulating coco fatty acid mixtures. Copyright © 2005 John Wiley & Sons, Ltd.     

Analysis of an encapsulated phase change material‐based energy storage system for high‐temperature applications

The capability of an encapsulated phase change material (EPCM)‐based thermal energy storage (TES) system to store a large fraction of latent energy at high temperatures was examined. A 3‐dimensional simulation of a prototype heat exchanger was conducted employing sodium nitrate as the phase change material (PCM). The k‐ω SST model was used to capture the turbulent flow of the HTF, while the melting front was tracked using the enthalpy‐porosity method. The results show that the use of metal deflectors yields a nearly constant heat transfer coefficient over the capsule's surface. Despite this, the presence of the void in the capsule and natural convection within the molten PCM influenced the storage characteristics of the system affecting the shape of the isotherms and melting front. Furthermore, the EPCM capsules consecutively undergo the same heat transfer starting from the capsule closest to the inlet. The EPCM capsules store 80% of the energy lost by the HTF. The 17.7 kg of sodium nitrate stores 14.5 MJ of energy where 20% of the energy stored is via latent heat. Of the energy released by the heat transfer fluid, 80% was absorbed by the EPCM capsules with the remaining energy going into the test section walls. A total of 14.5 MJ of energy was stored by the 17.7 kg of NaNO₃, of which 20% is attributed to the latent heat. The fraction of energy stored as latent heat would be larger if a smaller operating temperature range was used. Thus, an EPCM‐based latent heat TES system is capable of storing a large fraction of the supplied energy and presents efficient means of storing thermal energy for high‐temperature applications. Additionally, the strong agreement between the numerical and experimental works demonstrates that the numerical methods employed can predict the behavior of an EPCM capsule not only within a single capsule but on the system scale as well. Therefore, the applied numerical methods can be used for further design and optimization of EPCM‐based latent heat TES systems.     

Encapsulated phase change materials for thermal energy storage: Experiments and simulation

In the present study, encapsulated phase change materials (PCMs) were used for the storage of thermal energy. Both experiments and simulation were performed to evaluate the characteristics of encapsulated PCMs. Tests were conducted in a packed bed to determine the performance of the encapsulated PCM. In the preparation of encapsulated PCMs, the coacervation technique was used. The performance of the encapsulated PCM was evaluated in terms of encapsulation ratio, hydrophilicity, and energy storage capacity. The experiments were designed, based on surface response method, to optimize the processing conditions. It was found that a higher coating to paraffin ratio led to a higher paraffin encapsulation ratio. The hydrophilicity value of encapsulated paraffin depended mainly on the ratio of paraffin to coating. The higher the ratio, the lower was its product hydrophilicity. When the paraffin to coating ratio was constant, the higher concentration of HCHO led to a lower hydrophilicity of the product. The encapsulated paraffin has shown large energy storage and release capacity (20–90 J g^?1) during its phase changes depending on different ratios of paraffin to coating. Thermal cyclic test showed that encapsulated paraffin kept its geometrical profile and energy storage capacity even after 1000 cycles of operation. In the experiments and simulation of fluid heating process in encapsulated PCM charged packed bed, results showed that Eulerian granular multiphase model in FLUENT 4.47 is suitable for simulation of such a system. Copyright © 2002 John Wiley & Sons, Ltd.     

Microencapsulation of phase change material with poly(ethylacrylate) shell for thermal energy storage

Microcapsules containing caprylic acid and polyethylacrylate shells were prepared using an emulsion polymerization technique for thermal energy storage applications. Ethylene glycol dimethacrylate was used as a crosslinking agent. The influence of the crosslinking agent concentration on the phase change properties of microcapsules was examined. The caprylic acid microcapsules (MicroPCMs) were analyzed by Fourier transform infrared spectroscopy, thermal gravimetric analysis, scanning electron microscopy, and differential scanning calorimetry. The results showed that microcapsules were synthesized successfully and that the best shell material:crosslinking agent concentration ratio was 1:0.2. The melting and freezing temperatures were measured through differential scanning calorimetry analysis and found to be 13.3 and 7.1°C, respectively. The melting and crystallization heats were determined to be 77.3 and ?77.0 kJ/kg, and the mean particle diameter was 0.64 μm. The thermal cycling tests of the microcapsules were performed for 400 heating/cooling cycles, and the results indicate that the synthesized microcapsules have good thermal reliabilities. Air stability test proved that the thermal properties and physical form of microcapsules were not affected by air. We recommend the prepared thermal, air, and chemically stable caprylic acid microcapsules for thermal energy storage applications as novel microPCM with latent heat storage capacities and properties. Copyright © 2014 John Wiley & Sons, Ltd.     

Photo-to-thermal conversion and energy storage of lauric acid/expanded graphite composite phase change materials

To make better use of solar energy, lauric acid/expanded graphite (LA/EG) composite phase change materials (PCMs) were synthesized to collect and store solar energy as latent heat thermal energy. The results of thermal characteristics show that when the mass fraction of EG is 5%, 10%, and 15%, the latent heat of LA/EG is 164.5, 156.9, and 148.0 J/g, and the thermal conductivity is 2.73, 7.98, and 10.54 W/(m·K). Leakage test shows that LA/EG PCMs with EG mass fraction of 10% and 15% are form stable after phase change. One thousand thermal cycles prove good thermal reliability of LA/EG. TG analysis indicates LA/EG PCMs have good thermal stability within operating temperature range. The Ultraviolet-visible spectra reveal that the absorbance of LA/EG composite PCMs would increase as the mass fraction of EG increases. Photothermal conversion experiment results indicate that the photothermal conversion efficiency of LA/EG composite PCMs increases as the mass fraction of EG increases, and the efficiency can reach 95% when the mass fraction of EG is 15%. Moreover, it was also found that the process of photothermal conversion can be accelerated with stronger illumination intensity or smaller heat transfer size. All the results show that the prepared LA/EG PCMs can convert solar energy into thermal energy and store it in the form of latent heat at the same time, which indicates it has promising prospect in the application of solar energy conversion and storage.     

Energy,exergy, and sensitivity analyses of underwater compressed air energy storage in an island energy system

An underwater compressed air energy storage (UWCAES) system is integrated into an island energy system. Both energy and exergy analyses are conducted to scrutinize the performance of the UWCAES system. The analyses reveal that a round‐trip efficiency of 58.9% can be achieved. However, these two analyses identify different directions for further improvement. The heat exchangers, expanders, compressors, electric motors, and generators account for the most exergy destruction. A sensitivity analysis is also conducted to investigate the importance of different input parameters on the round‐trip exergy efficiency of the UWCAES system. The results of both local and global analyses show that the round‐trip exergy efficiency is most sensitive to the isentropic efficiency of the expanders and compressors, and the efficiencies of the electric motors and generators. The impacts of the heat exchangers, the self‐discharge rate of the air accumulator, the inner diameter of the pneumatic pipelines, and the insulation thickness of the hot‐oil tank on the round‐trip exergy efficiency are shown to be highly nonlinear.     

Recent progress in diatomite based composite phase change materials for thermal energy storage

硅藻土是一种含量丰富的非金属矿,具有较高的孔隙率,良好的表面结构和热物理性能,因而可作为复合储热材料的载体.本文综述了复合储热材料的种类和制备工艺,并介绍了硅藻土的结构,性能和以硅藻土为载体的复合相变储热材料的研究及应用现状.     

相变储能建筑材料的研究进展

相变储能建筑材料是相变材料与建材基体复合制备的一种新型储能建筑材料。本文分析了相变材料的筛选和改进方法及其封装技术的研究现状,介绍了相变材料与建材基体复合工艺,系统阐述了相变储能建筑材料的作用机理和应用现状,并指出了相变储能建筑材料在实际应用中存在的一些问题,最后展望了相变储能建筑材料的发展前景。     

Performance evaluation of a solar thermal energy storage system using nanoparticle-enhanced phase change material

This paper presents a numerical investigation on the thermal performance of a solar latent heat storage unit composed of rectangular slabs combined with a flat-plate solar collector. The rectangular slabs of the storage unit are vertically arranged and filled with phase change material (PCM: RT50) dispersed with high conductive nanoparticles (Al₂O₃). A heat transfer fluid (HTF: water) goes flow in the solar collector and receives solar thermal energy form the absorber area, then circulates between the slabs to transfer heat by forced convection to nanoparticle-enhanced phase change material (NEPCM). A numerical model based on the finite volume method and the conservation equations was developed to model the heat transfer and flow processes in the storage unit. The developed model was validated by comparing the obtained results with the experimental, numerical and theoretical results published in the literature. The thermal performance of the investigated latent heat storage unit combined with the solar collector was evaluated under the meteorological data of a representative day of the month of July in Marrakesh city, Morocco. The effect of the dispersion of high conductive nanoparticles on the thermal behavior and storage performance was also evaluated and compared with the case of base PCM without additives.     

Discharge performance of a thermal energy storage unit with paraffin-expanded graphite composite phase change materials

本工作对石蜡（PA）及石蜡/膨胀石墨（97% PA/3% EG和95% PA/5% EG）复合相变储热材料的热性能进行了探究,考察了不同直径储热单元在干燥介质温度为25℃,风速为0.8 m/s条件下的放热性能。结果表明,在石蜡中添加膨胀石墨后,复合材料导热系数较纯石蜡分别提高了178.10%和214.30%,可以有效改善石蜡的导热性能,缩短放热时间;储热单元直径对放热性能有显著影响,随着石蜡相变储热单元直径的增大,放热时间线性增加;膨胀石墨的添加可以明显缩短放热时间,随膨胀石墨含量的增加,相同直径储热单元的放热时间逐渐缩短;膨胀石墨对储热单元放热性能的改善效果随直径变化而不同,在一定范围内随储热单元直径的增大而效果逐渐显著,达到极值后随直径的增大效果逐渐减弱,本实验条件下,最优储热单元直径在35~50 mm之间。结合实际生产需求,最优直径为35 mm。