Suzuki cross‐coupling reactions of aryl chlorides using [Cl2Pd(COD)]/piperazine derivative under microwave conditions

A new strategy to significantly improve the efficiency of Suzuki reactions was achieved under microwave irradiation. [Cl₂Pd(COD)]/piperazine derivative 1 catalyzed aryl chlorides with phenylboronic acid in methanol (50%) affording excellent yields under aerobic conditions. Application of this strategy to the synthesis of liquid crystal material is also described. Copyright © 2011 John Wiley & Sons, Ltd.     

Synthesis,characterization and catalytic activity of new aminomethyldiphosphine–Pd(II) complexes for Suzuki cross‐coupling reaction

A new range of CF₃‐substituted aminomethyldiphosphine (P―C―N) ligands ((C₆H₅)₂PCH₂)₂NR (R = ―C₆H₄(2‐CF₃) ( 1 ), ―C₆H₄(3‐CF₃) ( 1b ) has been synthesized from 2‐(trifluoromethyl)aniline and 3‐(trifluoromethyl)aniline with diphenylphosphine. The aminomethyldiphosphine ligands were reacted with Pd(cod)Cl₂ to give corresponding metal complexes, PdLCl₂ ( 2a , 2b ). The aminomethyldiphosphine–palladium compounds were characterized by utilizing several methods including NMR (¹H, ¹³C, ³¹P) and elemental analysis. These compounds were used as catalysts in Suzuki cross‐coupling reaction of aryl chlorides and bromides. The effect of base was also investigated in this current project. CF₃‐substituted aminomethyldiphosphine–palladium complexes were found to be efficient catalysts in Suzuki cross‐coupling reaction of activated and deactivated aryl boronic acids. Copyright © 2013 John Wiley & Sons, Ltd.     

Highly efficient and functional-group-tolerant catalysts for the palladium-catalyzed coupling of aryl chlorides with thiols

The cross-coupling reaction of aryl chlorides with aliphatic and aromatic thiols catalyzed by palladium complexes of the strongly binding bisphosphine CyPF-tBu ligand (1) is reported. Most of the reactions catalyzed by complexes of ligand 1 occur with turnover numbers that exceed those of previous catalysts by two orders of magnitude. The reactions occur with excellent yields, broad scope and high tolerance of functional groups. Coupling of aryl halides with thiols in the presence of low loadings of catalysts derived from other Josiphos type ligands, as well as ligands of other structural types, are also described.     

Pd/MOF‐199: As an efficient heterogeneous catalyst for the Suzukie Miyaura cross‐coupling reaction

Successful deposition of Pd nanoparticles is described using MOF‐199 as a support. Various characterization techniques including FTIR, XRD, SEM, BET‐BJH, TG‐DTA, and NH₃‐TPD were used to verify the efficiency of catalysts. Pd/MOF‐199 is utilized as a catalyst for Suzukie Miyaura reactions with reasonable to excellent reaction yields under reflux conditions in H₂O: ethanol solvent.     

Novel pyridine‐bis(ferrocene‐isoxazole) ligand: synthesis and application to palladium‐catalyzed Sonogashira cross‐coupling reactions under copper‐ and phosphine‐free conditions

We present here the first synthesis and application to Sonogashira reaction of pyridine‐bis(ferrocene‐isoxazole) Pd(II) complex 5 , prepared from 2,6‐bis‐(5‐ferrocenylisoxazole‐3‐yl)pyridine. Under copper‐ and phosphine‐free conditions, the stable complex 5 efficiently catalyzed the cross‐coupling of aryl halides with terminal alkynes in DMF–H₂O with TBAB as an additive, hexahydropyridine as base and affording internal arylated alkynes in moderate to excellent yields. Copyright © 2008 John Wiley & Sons, Ltd.     

The development of phosphinoamine–Pd(II)–imidazole complexes: implications in room‐temperature Suzuki–Miyaura cross‐coupling reaction

The reaction of N‐methylimidazole (N‐MeIm) and N‐butylimidazole (N‐BuIm) with the complexes [PdCl₂(PPh₂py–P,N)] and [PdCl₂(PPh₂Etpy–P,N)] in the presence of NH₄PF₆ under N₂ at room temperature afforded four new cationic Pd(II) complexes [PdCl(PPh₂py–P,N)(N‐MeIm)](PF₆) ( 1 ), [PdCl(PPh₂py–P,N)(N‐BuIm)](PF₆) ( 2 ), [PdCl(PPh₂Etpy–P,N)(N‐MeIm)](PF₆) ( 4 ) and [PdCl(PPh₂Etpy‐P,N)(N‐BuIm)](PF₆) ( 5 ) in good yields, where PPh₂py is 2‐(diphenylphosphino)pyridine and PPh₂Etpy is 2‐{2‐(diphenylphosphino)ethyl}pyridine). The complexes were fully characterized. The catalytic activities of these complexes were investigated for Suzuki–Miyaura cross‐coupling reactions at room temperature. Complex 2 exhibited excellent activity compared to other analogs. Copyright © 2013 John Wiley & Sons, Ltd.     

Ionic iron(III) complexes bearing a dialkylbenzimidazolium cation: Efficient catalysts for magnesium‐mediated cross‐couplings of aryl phosphates with alkyl bromides

A series of ionic iron(III) complexes of general formula [HLⁿ ][FeX₄] (HL¹ = 1,3‐dibenzylbenzimidazolium cation, X = Cl, 1 ; HL¹, X = Br, 2 ; HL² = 1,3‐dibutylbenzimidazolium cation, X = Br, 3 ; HL³ = 1,3‐bis(diphenylmethyl)benzimidazolium cation, X = Br, 4 ) were easily prepared in high yields by the direct reaction of FeX₃ with 1 equiv. of [HLⁿ ]X under mild conditions. All of them were characterized using elemental analysis, Raman spectroscopy and electrospray ionization mass spectrometry, and X‐ray crystallography for 1 and 4 . In the presence of magnesium turnings and LiCl, these air‐ and moisture‐insensitive complexes showed high catalytic activities in direct cross‐couplings of aryl phosphates with primary and secondary alkyl bromides with broad substrate scope, wherein complex 4 was the most effective.     

Preparation and catalytic properties of bis(imino)pyridine palladium(II) complexes as efficient catalysts for Suzuki cross‐coupling reaction in water

Air‐stable bis(imino)pyridine palladium(II) complexes were synthesized and complex 12 proved to be a highly efficient catalyst for the Suzuki cross‐coupling reaction between aryl bromides and arylboronic acids in air using water as solvent. The coupling reaction proceeded smoothly under mild conditions to provide biaryls in excellent yields and Pd black was not observed. The recycling of the catalysts was also investigated, for up to three cycles, and complex 12 still exhibited good activity. Copyright © 2009 John Wiley & Sons, Ltd.     

Ligandless heterogeneous palladium: an efficient and recyclable catalyst for Suzuki‐type cross‐coupling reaction

A mild and efficient ligand‐free Suzuki‐type cross‐coupling reaction of benzoyl chlorides and arylboronic acids catalyzed by heterogeneous Pd/C was developed. Benzoyl chlorides undergo cross‐coupling with electronically diverse arylboronic acids to give biaryl ketones in excellent yield, under aqueous media and optimum temperature. The application of 3 mol% of 10 wt% Pd/C to the cross‐coupling delivers utmost efficiency, and could be reused up to many consecutive cycles without any loss in activity. This method proceeds under aqueous media and a recyclable catalytic system, offering an environmentally benign alternative to the existing protocols. Copyright © 2014 John Wiley & Sons, Ltd.     

Immobilized Pd on (S)‐methyl histidinate‐modified multi‐walled carbon nanotubes: a powerful and recyclable catalyst for Mizoroki–Heck and Suzuki–Miyaura C–C cross‐coupling reactions in green solvents and under mild conditions

A stable and powerful heterogeneous palladium catalyst was synthesized using immobilized palladium on (S)‐methyl histidinate bonded onto the surface of multi‐walled carbon nanotubes. The catalyst was characterized using a combination of Fourier transform infrared and X‐ray photoelectron spectroscopies, transmission electron microscopy, X‐ray powder diffraction and inductively coupled plasma, thermogravimetric and elemental analyses. This new air‐ and moisture‐stable phosphine‐free palladium catalyst was found to be highly active and reusable in Mizoroki–Heck and Suzuki–Miyaura cross‐coupling reactions in poly(ethylene glycol) and aqueous ethanol as green solvents using an extremely small amount of palladium under mild conditions. Copyright © 2016 John Wiley & Sons, Ltd.     

Suzuki cross‐coupling reaction of aryl and heterocyclic bromides and aromatic polybromides on a Pd(II)‐hydrotalcite catalyst

The Suzuki cross‐coupling reaction of various bromine‐containing substrates and phenylboronic acid in toluene at 90 °C on a Pd(AcO)₂Py₂ catalyst supported on an Mg? Al hydrotalcite, using K₂CO₃ as the base, was studied. The conversion and selectivity results obtained for many of the substrates were excellent and similar to those provided by more active or even homogeneous catalysts. The reactions of aryl polybromides and phenylboronic acid gave the corresponding polyaromatic compounds in variable yields depending on the particular substrate. Arylation occurred in a consecutive manner by substitution of the different Br atoms. ICP‐MS measurements of the palladium content of the catalyst performed prior to and after the reaction revealed that part of the metal is incorporated into the bulk solution; therefore, the catalytic process is not purely heterogeneous. Copyright © 2008 John Wiley & Sons, Ltd.     

N‐methyliminodiacetic acid as a simple and highly efficient ligand for palladium‐catalyzed Suzuki–Miyaura cross‐coupling of aryl chlorides

A simple, air‐stable, inexpensive and easily prepared molecule, N‐methyliminodiacetic acid (MIDA), is reported as a ligand for palladium‐catalyzed Suzuki–Miyaura cross‐coupling reaction of phenylboronic acid with aryl chlorides. The yield of the corresponding Suzuki coupling reaction is up to around 90% at both high temperature of 80°C and room temperature under ambient atmosphere. Copyright © 2015 John Wiley & Sons, Ltd.     

Room temperature suzuki cross‐coupling polymerizations of aryl dihalides and aryldiboronic acid/acid esters with t‐Bu3P‐coordinated 2‐phenylaniline‐based palladacycle complex as the precatalyst

Room temperature Suzuki cross‐coupling polymerization of aryl dibromides/diiodides with aryldiboronic acids/acid esters with t‐Bu₃P‐coordinated 2‐phenylaniline‐based palladacycle complex, [2′‐(amino‐kN)[1,1′‐biphenyl]‐2‐yl‐kC]chloro(tri‐t‐butylphosphine)palladium, as a general precatalyst is described. Such room temperature Suzuki cross‐coupling polymerization is achieved by employing six equivalents or more of the base and affords polymers within an hour, with the yields and the molecular weights in general comparable to or higher than reported results that required higher reaction temperature and/or longer polymerization time. Our study provides a general catalyst system for the room temperature Suzuki cross‐coupling polymerization of aryl dibromides/diiodides with aryldiboronic acids/acid esters and paves the road for the investigation of employing other monodentate ligand‐coordinated palladacycle complexes including other electron‐rich monophosphine‐coordinated ones for room temperature cross‐coupling polymerizations. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1606–1611     

Magnetite tethered mesoionic carbene‐palladium (II): An efficient and reusable nanomagnetic catalyst for Suzuki‐Miyaura and Mizoroki‐Heck cross‐coupling reactions in aqueous medium

In this paper, a highly active, air‐ and moisture‐stable and easily recoverable magnetic nanoparticles tethered mesoionic carbene palladium (II) complex (MNPs‐MIC‐Pd) as nanomagnetic catalyst was successfully synthesized by a simplistic multistep synthesis under aerobic conditions using commercially available inexpensive chemicals for the first time. The synthesized MNPs‐MIC‐Pd nanomagnetic catalyst was in‐depth characterized by numerous physicochemical techniques such as FT‐IR, ICP‐AES, FESEM, EDS, TEM, p‐XRD, XPS, TGA and BET surface area analysis. The prepared MNPs‐MIC‐Pd nanomagnetic catalyst was used to catalyze the Suzuki–Miyaura and Mizoroki–Heck cross‐coupling reactions and exhibited excellent catalytic activity for various substrates under mild reaction conditions. Moreover, MNPs‐MIC‐Pd nanomagnetic catalyst could be easily and rapidly recovered by applying an external magnet. The recovered MNPs‐MIC‐Pd nanomagnetic catalyst exhibited very good catalytic activity up to ten times in Suzuki–Miyaura and five times in Mizoroki–Heck cross‐coupling reactions without considerable loss of its catalytic activity. However, MNPs‐MIC‐Pd nanomagnetic catalyst shows notable advantages such as heterogeneous nature, efficient catalytic activity, mild reaction conditions, easy magnetic work up and recyclability.     

A Suzuki‐type cross‐coupling reaction of arylacetylene halides with arylboronic acids

A PdCl₂‐catalyzed direct alkynylation of arylboronic acids to give diarylacetylenes is described. The optimal conditions using PdCl₂ as catalyst, MeOH PhMe H₂O as solvent and K₂CO₃ as base effectively suppressed the formation of homo‐coupling product and afforded moderate to good yield of the desired unsymmetrical coupling product. This reaction represents a Suzuki‐type sp²(C B)–sp(C X) cross‐coupling. Copyright © 2011 John Wiley & Sons, Ltd.     

Cu‐catalyzed coupling of arylsulfinic salts with arylsilanes under mild conditions

Arylsilanes were efficiently coupled with arylsulfinic salts for the first time under mild conditions. Diarylsulfone derivatives were easily synthesized in high yields with the assistance of nitrogen‐containing ligands and KF. The transformation is simple and efficient and the starting materials are readily available. Copyright © 2014 John Wiley & Sons, Ltd.     

A versatile method for the synthesis of diaryl and alkyl aryl ketones via palladium‐catalysed cross‐coupling reaction of arylboronic acids with acyl chlorides

An efficient catalytic system using 1‐benzyl‐4‐aza‐1‐azoniabicyclo[2.2.2]octane chloride and PdCl₂ was developed for the cross‐coupling reaction of arylboronic acids with acyl chlorides. The catalytic amount of this homogeneous catalytic system affords the corresponding diaryl and alkyl aryl ketones in good to excellent yields under mild reaction conditions. Copyright © 2015 John Wiley & Sons, Ltd.     

Synthesis and X‐ray structural characterization of a bidendate phosphine (dppe) palladium(II) complex and its application in Stille and Suzuki cross‐coupling reactions

The synthesis, characterization, crystal structure and catalyst activity of the bidentate phosphine complex [1,2‐bis(diphenylphosphino)ethane]palladium(II) bromide, [PdBr₂(dppe)], are presented. Treatment of 1,2‐bis(diphenylphosphino)ethane with palladium(II) bromide under mild conditions resulted in the compound in high yield and purity. The characterization of the synthesized compound was performed using spectroscopic methods, such as Fourier transform infrared and NMR, CHN analysis and X‐ray crystallography. The structure of the compound was slightly distorted square planar. This compound was found to work as an efficient catalyst for both Stille and Suzuki cross‐coupling reactions of various aryl halides with triphenyltin chloride and/or phenylboronic acid. Also, the catalyst could be recovered and reused several times without significant loss of its catalytic activity. Copyright © 2016 John Wiley & Sons, Ltd.     

BiCl3‐catalyzed carbon‒carbon cross‐coupling of organoboronic acids with aryl iodides

A procedure for BiCl₃‐catalyzed carbon‐carbon cross‐coupling reaction of organoboronic acids with aryl iodides is described. This protocol has a wide substrate scope and uses an inexpensive and non‐toxic catalyst. Copyright © 2013 John Wiley & Sons, Ltd.     

Pd(II) salen complex covalently anchored to multi‐walled carbon nanotubes as a heterogeneous and reusable precatalyst for Mizoroki–Heck and Hiyama cross‐coupling reactions

A Pd(II) salen complex anchored to multi‐walled carbon nanotubes showed excellent catalytic activity and stability for the Mizoroki–Heck and Hiyama cross‐couplings of aryl halides with olefins and phenylsiloxanes. Furthermore, the heterogeneous catalyst could be reused up to four times with the catalytic activity being recovered easily after simple manipulations. Copyright © 2014 John Wiley & Sons, Ltd.