采用薄SiGe虚拟衬底制备应变Ge材料

This paper describes a method using both reduced pressure chemical vapor deposition （RPCVD） and ultrahigh vacuum chemical vapor deposition （UHVCVD） to grow a thin compressively strained Ge film. As the first step, low temperature RPCVD was used to grow a fully relaxed SiGe virtual substrate layer at 500 ℃ with a thickness of 135 nm, surface roughness of 0.3 nm, and Ge content of 77%. Then, low temperature UHVCVD was used to grow a high quality strained pure Ge film on the SiGe virtual substrate at 300 ℃ with a thickness of 9 nm, surface roughness of 0.4 nm, and threading dislocation density of - 10^5 cm^-2. Finally, a very thin strained Si layer of 1.5-2 nm thickness was grown on the Ge layer at 550 ℃ for the purpose of passivation and protection. The whole epitaxial layer thickness is less than 150 nm. Due to the low growth temperature, the two-dimensional layer-by-layer growth mode dominates during the epitaxial process, which is a key factor for the growth of high quality strained Ge films.     

Virtual Machine Scheduling for Improving Energy Efficiency in laaS Cloud

In IaaS Cloud, different mapping relationships between virtual machines （VMs） and physical machines （PMs） cause different resource utilization, so how to place VMs on PMs to reduce energy consumption is becoming one of the major concerns for cloud providers. The existing VM scheduling schemes propose optimize PMs or network resources utilization, but few of them attempt to improve the energy efficiency of these two kinds of resources simultaneously. This paper proposes a VM scheduling scheme meeting multiple resource constraints, such as the physical server size （CPU, memory, storage, bandwidth, etc.） and network link capacity to reduce both the numbers of active PMs and network elements so as to finally reduce energy consumption. Since VM scheduling problem is abstracted as a combination of bin packing problem and quadratic assignment problem, which is also known as a classic combinatorial optimization and NP-hard problem. Accordingly, we design a two- stage heuristic algorithm to solve the issue, and the simulations show that our solution outperforms the existing PM- or network-only optimization solutions.     

Empirical Analysis on Influence Mechanism of Cohesiveness and Collective Efficacy of Virtual Community Based on Triadic Reciprocal Determinism

The virtual community has become a new life style as for human, but the public＇s acceptance is relatively low at present. So the research about the mechanism of the influence on the cohesiveness and the collective efficiency in virtual community has an important theoretical value and practical value. In the paper, the key variables that affect virtual community cohesiveness are extracted from two aspects--self-perception of community members and community environment, and the influence mechanism model of virtual community cohesiveness and community collective efficiency is established based on Triadic Reciprocal Determinism. By means of the questionnaire on the community members and the empirical analysis, the key factors influencing cohesiveness of virtual community are brought up, as well as the mechanism that the four dimensions of cohesiveness work on collective efficiency. According to the results, it is practically meaningful that the problems and insufficiency in the operation of existing virtual community are discovered, which guides the operating managers of the virtual community to formulate operation policy of the virtual community for operating managers to develop strategies.     

Sub-Wavelength Virtual Imaging Using a Pair of 2-D L Loaded and C Loaded Transmission-Line Metamaterial Slabs

The dispersion relations and impedance expressions for both two-dimensional （2-D）/μ-negative and e-negative transmission line metamaterials, which may be paired to form a virtual image of the object, are presented. Under the conjugate matched condition, the voltage distri-butions inside and outside such paired slabs are derived for a plane-wave excitation. Green＇s functions corresponding to the voltages by a y directed elementary current source excitation are utilized to computed voltage phase and mag-nitude in all regions. The 2-D plots show that the voltage waves, the propagating waves and the evanescent waves, can pass through the conjugate matched slabs and so sub-wavelength virtual imaging has been achieved.     

Network Function Virtualization Technology： Progress and Standardization

Network innovation and business transformation are both necessary for telecom operators to adapt to new situations,but operatorsface challenges in terms of network bearer complexity,business centralization,and IT/CT integration.Network function virtualiza-tion(NFV)may inspire new development ideas,but many doubts still exist within industry,especially about how to introduceNFV into an operator’s network.This article describes the latest progress in NFV standardization,NFV requirements and hottechnology issues,and typical NFV applications in an operator networks.     

Software Radio——Software Radio： A Review of Design Considerations and Digital Hardware Choices

This paper reviews the requirements for Software Defined Radio （SDR） systems for high-speed wireless applications and compares how well the different technology choices available- from ASICs, FPGAs to digital signal processors （DSPs） and general purpose processors （GPPs） - meet them.     

EEFA： Energy Efficiency Frame Aggregation Scheduling Algorithm for IEEE 802.11n Wireless Network

Packet size is restricted due to the error-prone wireless channel which drops the network energy utilization. Furthermore, the frequent packet retransmissions also lead to energy waste. In order to improve the energy efficiency of wireless networks and save the energy of wireless devices, EEFA （Energy Efficiency Frame Aggregation）, a frame aggregation based energy-efficient scheduling algorithm for IEEE 802.11n wireless network, is proposed. EEFA changes the size of aggregated frame dynamically according to the frame error rate, so as to ensure the data transmission and retransmissions completed during the TXOP and reduce energy consumption of channel contention. NS2 simulation results show that EEFA algorithm achieves better performance than the original frame-aggregation algorithm.     

SDN-Based Data Offioading for 5G Mobile Networks

The rapid growth of 3G/4G enabled devices such as smartphones and tablets in large numbers has created increased demand formobile data services.Wi-Fi offloading helps satisfy the requirements of data-rich applications and terminals with improved multi-media.Wi-Fi is an essential approach to alleviating mobile data traffic load on a cellular network because it provides extra capaci-ty and improves overall performance.In this paper,we propose an integrated LTE/Wi-Fi architecture with software-defined net-working(SDN)abstraction in mobile backhaul and enhanced components that facilitate the move towards next-generation 5G mo-bile networks.Our proposed architecture enables programmable offloading policies that take into account real-time network condi-tions as well as the status of devices and applications.This mechanism improves overall network performance by deriving real-time policies and steering traffic between cellular and Wi-Fi networks more efficiently.     

应用于低中频和零中频DVB调谐器中8阶信道滤波器设计

An eighth order active-RC filter for low-IF and zero-IF DVB tuner applications is presented, which is implemented in Butterworth biquad structure. An automatic frequency tuning circuit is introduced to compensate the cut-off frequency variation using a 6-bit switched-capacitor array. Switched-resistor arrays are adopted to cover different cut-off frequencies in low-IF and zero-IF modes. Measurement results show that precise cut-off frequencies at 2.5, 3, 3.5 and 4 MHz in zero-IF mode, 5, 6, 7 and 8 MHz in low-IF mode can be achieved, 60 dB frequency attenuation can be obtained at 20 MHz, and the in-band group delay agrees well with the simulation. Two-tone testing shows the in-band IM3 achieves -52 dB and the out-band IM3 achieves -55 dB with -11 dBm input power. This proposed filter circuit, fabricated in a SMIC 0.18μm CMOS process, consumes 4 mA current with 1.8 V power supply.     

应力和电阻率可控的适用于高品质因子MEMS器件的原位掺硼LPCVD多晶硅薄膜

The simultaneous control of residual stress and resistivity of polysilicon thin films by adjusting the deposition parameters and annealing conditions is studied. In situ boron doped polysilicon thin films deposited at 520 ℃ by low pressure chemical vapor deposition （LPCVD） are amorphous with relatively large compressive residual stress and high resistivity. Annealing the amorphous films in a temperature range of 600-800 ℃ gives polysilicon films nearly zero-stress and relatively low resistivity. The low residual stress and low resistivity make the polysilicon films attractive for potential applications in micro-electro-mechanical-systems （MEMS） devices, especially in high resonance frequency （high-f） and high quality factor （high-Q） MEMS resonators. In addition, polysilicon thin films deposited at 570 ℃ and those without the post annealing process have low resistivities of 2-5 mΩ·cm. These reported approaches avoid the high temperature annealing process （〉 1000 ℃）, and the promising properties of these films make them suitable for high-Q and high-f MEMS devices.     

Large-signal characterizations of DDR IMPATT devices based on group Ⅲ-Ⅴ semiconductors at millimeter-wave and terahertz frequencies

Large-signal （L-S） characterizations of double-drift region （DDR） impact avalanche transit time （IM- PATT） devices based on group III-V semiconductors such as wurtzite （Wz） GaN, GaAs and InP have been carried out at both millimeter-wave （mm-wave） and terahertz （THz） frequency bands. A L-S simulation technique based on a non-sinusoidal voltage excitation （NSVE） model developed by the authors has been used to obtain the high frequency properties of the above mentioned devices. The effect of band-to-band tunneling on the L-S properties of the device at different mm-wave and THz frequencies are also investigated. Similar studies are also carried out for DDR IMPATTs based on the most popular semiconductor material, i.e. Si, for the sake of comparison. A compara- tive study of the devices based on conventional semiconductor materials （i.e. GaAs, InP and Si） with those based on Wz-GaN shows significantly better performance capabilities of the latter at both mm-wave and THz frequencies.     

Survivable Virtual Network Mapping Using Optimal Backup Topology in Virtualized SDN

Software-Defined Network architecture offers network virtualization through a hypervisor plane to share the same physical substrate among multiple virtual networks. However, for this hypervisor plane, how to map a virtual network to the physical substrate while guaranteeing the survivability in the event of failures, is extremely important. In this paper, we present an efficient virtual network mapping approach using optimal backup topology to survive a single link failure with less resource consumption. Firstly, according to whether the path splitting is supported by virtual networks, we propose the OBT-I and OBT-II algorithms respectively to generate an optimal backup topology which minimizes the total amount of bandwidth constraints. Secondly, we propose a Virtual Network Mapping algorithm with coordinated Primary and Backup Topology （VNM-PBT） to make the best of the substrate network resource. The simulation experiments show that our proposed approach can reduce the average resource consumption and execution time cost, while improving the request acceptance ratio of VNs.     

用于ZigBee的2.4GHz低功耗双增益低噪声放大器

This paper presents a fully differential dual gain low noise amplifier（DGLNA） for low power 2.45-GHz ZigBee/IEEE 802.15.4 applications.The effect of input parasitics on the inductively degenerated cascode LNA is analyzed.Circuit design details within the guidelines of the analysis are presented.The chip was implemented in SMIC 0.18-μm 1P6M RF/mixed signal CMOS process.The DGLNA achieves a maximum gain of 8 dB and a minimum gain of 1 dB with good input return loss.In high gain mode, the measured noise figure（NF） is 2.3-3 dB in the whole 2.45-GHz ISM band.The measured 1-dB compression point, IIP3 and IIP2 is-9, 1 and 33 dBm, respectively.The DGLNA consumes 2 mA of current from a 1.8 V power supply.     

Distributed Power Control for Energy Conservation in Hybrid Cellular Network with Device-to-Device Communication

Device-to-Device （D2D） com- munication has been proposed as a promising implementation of green communication to benefit the existed cellular network. In order to limit cross-tier interference while explore the gain of short-range communication, we devise a series of distributed power control （DPC） schemes for energy conservation （EC） and enhancement of radio resource utilization in the hybrid system. Firstly, a constrained opportunistic power control model is built up to take advantage of the interference avoidance methodology in the presence of service requirement and power constraint. Then, biasing scheme and admission control are added to evade ineffective power consumption and maintain the feasibility of the system. Upon feasibility, a non-cooperative game is further formulated to exploit the profit in EC with minor influence on spectral efficiency （SE）. The convergence of the DPC schemes is validated and their performance is confirmed via simulation results.     

具有频率调谐的GNSS接收机双模复数滤波器

A fifth/seventh order dual-mode OTA-C complex filter for global navigation satellite system receivers is implemented in a 0.18μm CMOS process.This filter can be configured as the narrow mode of a 4.4 MHz bandwidth center at 4.1 MHz or the wide mode of a 22 MHz bandwidth center at 15.42 MHz.A fully differential OTA with source degeneration is used to provide sufficient linearity.Furthermore,a ring CCO based frequency tuning scheme is proposed to reduce frequency variation.The measured results show that in narrow-band mode the image rejection ratio（IMRR）is 35 dB,the filter dissipates 0.8 mA from the 1.8 V power supply,and the out-of-band rejection is 50 dB at 6 MHz offset.In wide-band mode,IMRR is 28 dB and the filter dissipates 3.2 mA.The frequency tuning error is less than±2%.     

A 3.1-4.8 GHz CMOS receiver for MB-OFDM UWB

An integrated fully differential ultra-wideband CMOS receiver for 3.1-4.8 GHz MB-OFDM systems is presented. A gain controllable low noise amplifier and a merged quadrature mixer are integrated as the RF front-end. Five order Gm-C type low pass filters and VGAs are also integrated for both I and Q IF paths in the receiver. The ESD protected chip is fabricated in a Jazz 0.18μm RF CMOS process and achieves a maximum total voltage gain of 65 dB, an AGC range of 45 dB with about 6 dB/step, an averaged total noise figure of 6.4 to 8.8 dB over 3 bands and an in-band IIP3 of-5.1 dBm. The receiver occupies 2.3 mm2 and consumes 110 mA from a 1.8 V supply including test buffers and a digital module.     

一种适用于“模一”多带OFDM超宽带系统中跳频产生的3.96GHz锁相环

A fully integrated phase-locked loop（PLL） is presented for a single quadrature output frequency of 3.96 GHz.The proposed PLL can be applied to mode-1 MB-OFDM UWB hopping carrier generation.An adaptive frequency calibration loop is incorporated into the PLL.The capacitance area in the loop filter is largely reduced through a capacitor multiplier.Implemented in a CMOS process, this PLL draws 13.0 mA current from a single 1.2 V supply while occupying 0.55 mm2 die area.Measurement results show that the PLL achieves a phase noise of-70 dBc/Hz at 10 kHz offset and-113 dBc/Hz at 1 MHz offset.The integrated RMS jitter from 1 kHz to 10 MHz is 2.2 ps.The reference spur level is less than-68 dBc.     

A K-Median Facility Location Agent for Low-Cost Service Selection in Digital Community Network

With the increasing number of web services, it becomes a difficult task for an ordinary user to select an appropriate service. Hence, it is conventional that users in a digital community network take part in a collaborative mechanism for the purpose of service selection. The participation usually brings unnecessary burdens for users, such as giving opinions, storing service information. Extra communication overhead hinders the performance of the network. Thus, the community administrators are facing a problem of how to obtain an overall service selection result for the whole community readily and effectively. To address this problem, we present a k-median facility location agent model. The model analyzes the procedure of service selection through five entities and six types of messages. Two algorithms are elaborated in pursuit of a global optimization concerning connection costs between users and facilities where services are deployed. To evaluate our model, we conduct extensive simulations and present a detailed analysis of the simulation results.     

Recommending Friends Instantly in Location-based Mobile Social Networks

Differently from the general online social network （OSN）, location- based mobile social network （LMSN）, which seamlessly integrates mobile computing and social computing technologies, has unique characteristics of temporal, spatial and social correlation. Recommending friends instantly based on current location of users in the real world has become increasingly popular in LMSN. However, the existing friend recommendation methods based on topological structures of a social network or non-topological information such as similar user profiles cannot well address the instant making friends in the real world. In this article, we analyze users＇ check-in behavior in a real LMSN site named Gowalla. According to this analysis, we present an approach of recommending friends instantly for LMSN users by considering the real-time physical location proximity, offline behavior similarity and friendship network information in the virtual community simultaneously. This approach effectively bridges the gap between the offline behavior of users in the real world and online friendship network information in the virtual community. Finally, we use the real user check-in dataset of Gowalla to verify the effectiveness of our approach.     

A Fast Algorithm for Near Field Radiated by Aperture Antennas

A fast algorithm in frequency and time domain is presented for near field radiated by aperture antennas. The convolution formulation is earlier developed to relate the near field to the equivalent magnetic current sources on the aperture in frequency domain, which accelerates the near field＇s calculation via FFT, and Fourier transform pairs have been found on the basis of Plane wave spectrum （PWS） theory and convolution theorem. The algorithm in time domain can be obtained based on the method of frequency domain, which has been proved by the rigorous Electromagnetic theory associated with Fourier transform theory. Numerical results are presented for two antennas to verify the fast algorithm.