悬浮聚合法合成马拉硫磷分子印迹聚合物的吸附性能研究

基于分子印迹技术,采用悬浮聚合的方法,合成了马拉硫磷分子印迹聚合物。通过优化,确定最佳合成条件为:模板分子(马拉硫磷)∶功能单体(α-甲基丙烯酸)为1∶8,模板分子(马拉硫磷)∶交联剂(乙二醇二甲基丙烯酸酯)为1∶40,温度60℃,引发剂用量为1.0%。吸附性能测试结果表明,印迹聚合物对马拉硫磷的最大吸附量为4.62μg/mg,而非印迹聚合物对马拉硫磷的最大吸附量为2.21μg/mg;通过选择性实验得到印迹聚合物对灭线磷、甲拌磷、特丁硫磷、乐果、马拉硫磷、克线磷的吸附量分别为3.87、3.75、3.57、4.00、4.44、3.61μg/mg,而非印迹聚合物的吸附量分别为1.42、1.37、1.30、1.43、1.12、1.23μg/mg。     

内分泌干扰物雌酮分子印迹新型吸附功能材料的制备及其选择性能研究料

采用分子印迹本体聚合法,制备了对内分泌干扰物雌酮具有高选择识别能力的分子印迹聚合物。吸附动力学和选择性实验结果表明,与非印迹聚合物相比,印迹聚合物具有较高的吸附容量和吸附速率,对模板分子具有较高的选择性。聚合反应条件对印迹聚合物的吸附和识别性能有重要影响,以丙烯酰胺为功能单体,模板分子、功能单体和交联剂摩尔比为1：3：6,制备的印迹聚合物具有较高的选择和吸附性能。     

内分泌干扰物雌酮分子印迹新型吸附功能材料的制备及其选择性能研究

采用分子印迹本体聚合法,制备了对内分泌干扰物雌酮具有高选择识别能力的分子印迹聚合物。吸附动力学和选择性实验结果表明,与非印迹聚合物相比,印迹聚合物具有较高的吸附容量和吸附速率,对模板分子具有较高的选择性。聚合反应条件对印迹聚合物的吸附和识别性能有重要影响,以丙烯酰胺为功能单体,模板分子、功能单体和交联剂摩尔比为1:3:6,制备的印迹聚合物具有较高的选择和吸附性能。     

基于N,O-双异丁烯酰乙醇胺为交联功能单体的苯磺隆分子印迹聚合物膜的制备及其性能研究

以苯磺隆为模板分子, N,O-双异丁烯酰乙醇胺为交联功能单体, 在尼龙-6膜上通过紫外光照引发合成了分子印迹聚合物膜, 并用扫描电镜对其表面形态进行了表征. 用紫外分光光谱法研究了模板分子与交联功能单体之间的相互作用. 印迹因子的测定和底物竞争渗透实验结果表明, 分子印迹聚合物膜对模板分子苯磺隆具有较高的选择性, 而非分子印迹聚合物膜没有选择性.     

替代模板分子印迹技术在样品前处理中的应用

分子印迹聚合物具有抗恶劣环境、选择性高、稳定性好等特点,广泛应用于复杂样品的前处理。采用结构类似物作为替代模板分子,可以解决分子印迹聚合物制备时目标物溶解性差的问题,替代模板分子印迹聚合物不仅对目标分析物具有选择性识别能力,还可以避免模板泄露对痕量分析造成的影响。本文综述了替代模板分子印迹技术在样品前处理中的应用进展,包括替代模板分子印迹技术在固相萃取、固相微萃取、色谱固定相、基质固相分散萃取中的应用,最后对替代模板分子印迹技术在未来的样品前处理中的研究进行了展望。     

对硫磷分子印迹聚合物在固相萃取中的应用

采用分子印迹技术,以对硫磷为模板分子,二乙烯三胺为固化剂,环氧树脂为单体,聚乙二醇为致孔剂,制备了具有良好识别性能的分子印迹聚合物.系统考察了对硫磷与其结构类似物在该聚合物上的选择性分离富集特性.用聚合物固相萃取了小白菜中的对硫磷.结果表明,聚合物对模板分子产生了印迹效应,对对硫磷有明显的选择性.本文采用C18色谱柱,...     

氧化石墨烯基异丙隆分子印迹聚合物的制备及其吸附性能研究

以氧化石墨烯为载体,异丙隆为模板分子,采用表面印迹技术制备了分子印迹聚合物。采用透射电子显微镜、拉曼光谱和热重分析仪对该分子印迹聚合物的结构进行了表征,并通过动态平衡结合法研究了该分子印迹聚合物的吸附能力。结果表明:准二级动力学模型很好地拟合了吸附动力学,相关系数(R2)为0.999 7;与非分子印迹聚合物相比,制备的印迹材料表现出高吸附效率和快速的吸附动力学;选择性吸附试验表明该分子印迹聚合物对异丙隆具有选择性和特异性吸附。     

卡维地洛印迹聚合物的合成及其识别性能的研究

以卡维地洛药物分子为模板,甲基丙烯酸为功能单体,乙二醇二甲基丙烯酸酯为交联剂,采用紫外光引发聚合的分子印迹技术,成功制备出卡维地洛分子印迹聚合物。用热重分析、扫描电镜对聚合物进行了表征,通过Scatchard方程研究了印迹聚合物对模板分子的结合特性。结果表明,在所研究的浓度范围内,印迹聚合物存在一类等价的结合位点,并计算出印迹聚合物与模板分子的平衡离解常数为0.5642 mmol/L,最大表观吸附量为97.44μmol/g,为理论值的63.53%。对不同底物的结合实验表明,该聚合物对卡维地洛具有优良的吸附选择性。     

以分子印迹聚合物为固定相分离和测定氟喹诺酮类药物

以氧氟沙星作为模板分子合成了分子印迹聚合物,并通过高效液相色谱法研究了印迹聚合物的识别特性。实验结果表明,印迹聚合物对模板分子具有很强的亲和力和特定的选择性。作为色谱固定相,氧氟沙星印迹聚合物和目标分子之间的相互作用除了印迹部分的离子和氢键作用外,也存在非印迹部分的疏水作用。同时研究了色谱条件对氟喹诺酮类药物分离的影响。     

吡虫啉分子印迹聚合物的合成及固相萃取性能研究

采用分子印迹技术,以丙烯酸为功能单体,乙二醇二甲基丙烯酸酯为交联剂,在甲醇溶液中合成了吡虫啉分子印迹聚合物,研究了聚合物的吸附性和选择性,用聚合物固相萃取大蒜中吡虫啉残留量。结果表明,聚合物通过离子键和氢键对模板分子产生了印迹效应,对吡虫啉具有明显的选择性。通过优化淋洗和洗脱条件,对大蒜中的残留吡虫啉富集。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Microwave-assisted copper-catalyzed stereoselective ring expansion of three-membered heterocycles with α-diazo-β-dicarbonyl compounds

Microwave-assisted copper-catalyzed ring expansions of three-membered heterocycles with α-diazo-β-dicarbonyl compounds were investigated. Thiiranes generated 3-acyl-5,6-dihydro-1,4-oxathiines in the presence of copper sulfate and trans-3-acyl-5,6-dihydro-1,4-oxathiines as stereospecific products for 1,2-disubstituted cis-thiiranes through an intramolecular S_N2 process. Oxiranes gave rise to 2-acyl-5,6-dihydro-1,4-dioxines under the catalysis of copper hexafluoroacetylacetonate and cis-3-acyl-5,6-dihydro-1,4-dioxines as stereospecific products for 1,2-disubstituted cis-oxiranes via an intimate ion-pair mechanism. The current method provides a direct and simple strategy in efficient preparation of 3-acyl-5,6-dihydro-1,4-oxathiines and 2-acyl-5,6-dihydro-1,4-dioxines, important agents in medicinal and agricultural chemistry, from readily available thiiranes and oxiranes, respectively.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.