Molecularly Imprinted Polymer Coated Quantum Dots for Multiplexed Cell Targeting and Imaging

Advanced tools for cell imaging are of great interest for the detection, localization, and quantification of molecular biomarkers of cancer or infection. We describe a novel photopolymerization method to coat quantum dots (QDs) with polymer shells, in particular, molecularly imprinted polymers (MIPs), by using the visible light emitted from QDs excited by UV light. Fluorescent core–shell particles specifically recognizing glucuronic acid (GlcA) or N‐acetylneuraminic acid (NANA) were prepared. Simultaneous multiplexed labeling of human keratinocytes with green QDs conjugated with MIP‐GlcA and red QDs conjugated with MIP‐NANA was demonstrated by fluorescence imaging. The specificity of binding was verified with a non‐imprinted control polymer and by enzymatic cleavage of the terminal GlcA and NANA moieties. The coating strategy is potentially a generic method for the functionalization of QDs to address a much wider range of biocompatibility and biorecognition issues.     

Selective collection and detection of MCF-7 breast cancer cells using aptamer-functionalized magnetic beads and quantum dots based nano-bio-probes

A novel strategy for selective collection and detection of breast cancer cells (MCF-7) based on aptamer–cell interaction was developed. Mucin 1 protein (MUC1) aptamer (Apt1) was covalently conjugated to magnetic beads to capture MCF-7 cell through affinity interaction between Apt1 and MUC1 protein that overexpressed on the surface of MCF-7 cells. Meanwhile, a nano-bio-probe was constructed by coupling of nucleolin aptamer AS1411 (Apt2) to CdTe quantum dots (QDs) which were homogeneously coated on the surfaces of monodispersed silica nanoparticles (SiO₂ NPs). The nano-bio-probe displayed similar optical and electrochemical performances to free CdTe QDs, and remained high affinity to nucleolin overexpressed cells through the interaction between AS1411 and nucleolin protein. Photoluminescence (PL) and square-wave voltammetric (SWV) assays were used to quantitatively detect MCF-7 cells. Improved selectivity was obtained by using these two aptamers together as recognition elements simultaneously, compared to using any single aptamer. Based on the signal amplification of QDs coated silica nanoparticles (QDs/SiO₂), the detection sensitivity was enhanced and a detection limit of 201 and 85 cells mL⁻¹ by PL and SWV method were achieved, respectively. The proposed strategy could be extended to detect other cells, and showed potential applications in cell imaging and drug delivery.     

Resonance energy transfer between ZnCdHgSe quantum dots and gold nanorods enhancing photoelectrochemical immunosensing of prostate specific antigen

Gold nanorods (AuNRs) integrated with ZnCdHgSe near-infrared quantum dots (AuNRs-ZnCdHgSe QDs) were successfully synthesized and characterized by transmission electron microscope, X-ray photoelectron spectroscopy, and X-ray diffraction. A glassy carbon electrode was decorated with the aforementioned AuNRs-ZnCdHgSe QDs nanocomposite, which provides a biocompatible interface for the subsequent immobilization of prostate specific antibody (anti-PSA). After being successively treated with glutaraldehyde vapor and bovine serum albumin solution, a photoelectrochemical immunosensing platform based on anti-PSA/AuNRs-ZnCdHgSe QDs/GCE was established. The photocurrent response of ZnCdHgSe QDs was tremendously improved by AuNRs due to the effect of resonance energy transfer which can be deduced from the dependence of the enhanced efficiency on the AuNRs with different length-to-diameter ratios and spectral absorption characteristics. A maximum photocurrent was obtained when the absorption spectrum of AuNRs matched well with the emission spectrum of ZnCdHgSe QDs. A photoelectrochemical immunosensor for prostate specific antigen (PSA) was achieved by monitoring the photocurrent variation. The photocurrent variation before and after being interacted with PSA solution exhibits a good linear relationship with the logarithm of its concentration (logc_PSA) in the range from 1.0 pg mL⁻¹ to 50.0 ng mL⁻¹. The detection limit of this photoelectrochemical immunosensor is able to reach 0.1 pg mL⁻¹ (S/N = 3). Determining PSA in clinical human serum was also demonstrated by using the developed anti-PSA(BSA)/AuNRs-ZnCdHgSe QDs/GCE electrode. The results were comparable with those obtained from an enzyme-linked immunosorbent assay method.     

Determination of Hydrocortisone in Cosmetics by CdSe/CdS Quantum Dots-Based Fluoroimmunoassay Using Magnetic Fe3O4/Au Nanoparticles as Solid Carriers

This work demonstrated the feasibility of detecting hydrocortisone in cosmetics using a novel CdSe/CdS quantum dots‐based competitive fluoroimmunoassay with magnetic core/shell Fe₃O₄/Au nanoparticles (MCFN) as solid carriers. Hydrocortisone antigen was labeled with the synthesized core/shell CdSe/CdS quantum dots (QDs) to form the antigen‐QDs conjugate. Meanwhile, hydrocortisone antibody was incubated with MCFN and the immobilized antibody was obtained. The immobilized antibody was then mixed sequentially with hydrocortisone and a slightly excess amount of the QDs‐labeled hydrocortisone antigen, allowing their competition for binding with the antibody immobilized on MCFN. The bound hydrocortisone and the antigen‐QDs conjugates on MCFN were removed subsequently after the mixture was applied to a magnetic force. The analyte concentration was obtained by measuring the fluorescence intensity of the unbound hydrocortisone antigen‐QDs conjugates. The proposed method was characterized by simplicity, rapidity, and high sensitivity with a wide linear working range of 0.5 to 15000 pg·mL^?1 and a low detection limit of 0.5 pg·mL^?1. The proposed method was successfully applied to the determination of hydrocortisone in cosmetics with satisfactory results.     

Design of Sensitive Biocompatible Quantum‐Dots Embedded in Mesoporous Silica Microspheres for the Quantitative Immunoassay of Human Immunodeficiency Virus‐1 Antibodies

A novel sandwich‐type electrochemiluminescence (ECL) immunosensor was developed to enable the sensitive detection of HIV‐1 antibodies. This system incorporated mesoporous silica (mSiO₂) complexed with quantum dots (QDs) and nano‐gold particles, which were assembled to enhance signal detection. Magnetic beads were used by immobilizing the secondary anti‐IgG antibody. This was first employed to capture HIV‐1 antibody (Ab) to form a Fe₃O₄/anti‐IgG/Ab complex. A high loading and signal‐enhanced nanocomposite (hereafter referred to as Au‐mSiO₂‐CdTe) was used as a HIV‐1 antigen label. The Au‐mSiO₂‐CdTe nanocomposite was conjugated with the Fe₃O₄/anti‐IgG/Ab complex to form an immunocomplex (hereafter referred to as Fe₃O₄/anti‐IgG/Ab/HIV‐1/CdTe‐mSiO₂‐Au). This complex could be further separated by an external magnetic field to produce ECL signals. Due to the large specific surface area and pore volume of mSiO₂, the loading of the CdTe QDs was markedly increased. Thus, the loaded QDs released a powerful chemiluminescent signal with a concordantly increased sensitivity of the immunosensor. The immunosensor was highly sensitive, and displayed a linear range of responses for HIV‐1 antibody across a dilution range of 1 : 1500 through 1 : 50 with the detection limit of 1 : 4500. The immunoassay can be a promising candidate in early diagnosis of HIV infection.     

Disposable integrated bismuth citrate-modified screen-printed immunosensor for ultrasensitive quantum dot-based electrochemical assay of C-reactive protein in human serum

A novel immunosensor based on graphite screen-printed electrodes (SPEs) modified with bismuth citrate was developed for the voltammetric determination of C-reactive protein (CRP) in human serum using quantum dots (QDs) labels. The sandwich-type immunoassay involved physisorption of CRP capture antibody on the surface of the sensor, sequential immunoreactions with CRP and biotinylated CRP reporter antibody and finally reaction with streptavidin-conjugated PbS QDs. The quantification of the target protein was performed with acidic dissolution of the PbS QDs and anodic stripping voltammetric detection of the Pb(II) released. Detection was performed at bismuth nanodomains formed on the sensor surface during the electrolytic preconcentration step, as bismuth citrate was reduced to metallic bismuth simultaneously with the deposition of Pb on the surface of the immunosensor. Under optimal conditions, the response was linear over the range 0.2–100 ng mL⁻¹ CRP and the limit of detection was 0.05 ng mL⁻¹ CRP. Since the modified SPE serves as both the biorecognition element and the QDs reader, the analytical procedure is simplified, the drawbacks of existing electroplated immunosensors are minimized while the proposed disposable sensing platform provides convenient, low-cost and ultrasensitive detection of proteins and wider scope for mass-production.     

Biomimetic Synthesis of Ag2Se Quantum Dots with Enhanced Photothermal Properties and as “Gatekeepers” to Cap Mesoporous Silica Nanoparticles for Chemo–Photothermal Therapy

Ag₂Se quantum dots (QDs) with near‐infrared (NIR) fluorescence have been widely utilized in NIR fluorescence imaging in vivo because of their narrow bulk band gap and excellent biocompatibility. However, most of synthesis methods for Ag₂Se QDs are expensive and the reactants are toxic. Herein, a new protein‐templated biomimetic synthesis approach is proposed for the preparation of Ag₂Se QDs by employing bovine serum albumin (BSA) as a template and dispersant. The BSA‐templated Ag₂Se QDs (Ag₂Se@BSA QDs) showed NIR fluorescence with high fluorescence quantum yield (≈21.2 %), excellent biocompatibility and good dispersibility in different media. Moreover, the obtained Ag₂Se@BSA QDs exhibited remarkable photothermal conversion (≈27.8 %), which could be used in photothermal therapy. As a model application in biomedicine, the Ag₂Se@BSA QDs were used as “gatekeepers” to cap mesoporous silica nanoparticles (MSNs) by means of electrostatic interaction. By taking the advantages of NIR fluorescence and photothermal property of Ag₂Se@BSA QDs, the obtained MSN‐DOX‐Ag₂Se nanoparticles (MDA NPs) were employed as a nanoplatform for combined chemo‐photothermal therapy. Compared with free DOX and MDA NPs without NIR laser, the laser‐treated MDA NPs exhibited lower cell viability in vitro, implying that Ag₂Se@BSA QDs are highly promising photothermal agents and the MDA NPs are potential carriers for chemo–photothermal therapy.     

High‐resolution quantification by charge‐dominant electrophoretic mobility shift of quantum dots

Conjugation of biomolecules to colloidal nanoparticles, such as quantum dots (QDs), often leads to change in mobility. We discover that linking DNA molecules to quantum dots alters their surface charge density without significantly increasing the hydrodynamic radius, causing a prominent shift in electrophoretic mobility. In this study, a high‐resolution molecular quantification method named quantification by QDs electrophoretic mobility shift (qQEMS) is developed based on the charge‐dominant transformation that closely associates DNA quantity to QDs electrophoretic mobility. The versatility of qQEMS is demonstrated by a number of quantification assays in which DNA molecules functioned as enzyme substrates, target‐specific probes, and competitive charge carriers. qQEMS shows a great potential as a generic and versatile quantification platform for a wide range of applications.     

Enhancing the photoelectrochemical performance of BiVO<Subscript>4</Subscript> by decorating only its (040) facet with self-assembled Ag@AgCl QDs

Decorating a host semiconductor with quantum dots (QDs) is an important strategy for optimizing the separation efficiency and transfer of photogenerated charge carriers. In this work, we designed a heterojunction photoelectrocatalyst in which the (040) facet of BiVO₄ was decorated with self-assembled Ag@AgCl QDs (“Ag@AgCl/₀₄₀BiVO₄”). In this photocatalyst, photogenerated charge carriers are efficiently separated using a Z-scheme approach. A facile oil-in-water self-assembly method was employed to generate the composite photocatalyst, which was then characterized via XRD, XPS, SEM, TEM, etc. The results of this characterization indicated that the Ag@AgCl QDs were approximately 5 nm in size and were well dispersed across the (040) crystal facet of BiVO₄. PEC measurements indicated that the efficiency of electron–hole separation was enhanced when the BiVO₄ was decorated with Ag@AgCl QDs on just one of its facets (040) rather than across all of its surface. An attempt was also made to elucidate the mechanism of interfacial charge transfer in the Ag@AgCl/₀₄₀BiVO₄ system. Decorating a specific crystal facet (040) of BiVO₄ with Ag@AgCl QDs was found to facilitate the spatial separation of photogenerated charge carriers and to enhance the redox ability of the system.     

A dual-color flow cytometry protocol for the simultaneous detection of Vibrio parahaemolyticus and Salmonella typhimurium using aptamer conjugated quantum dots as labels

A sensitive, specific method for the collection and detection of pathogenic bacteria was demonstrated using quantum dots (QDs) as a fluorescence marker coupled with aptamers as the molecular recognition element by flow cytometry. The aptamer sequences were selected using a bacterium-based SELEX strategy in our laboratory for Vibrio parahaemolyticus and Salmonella typhimurium that, when applied in this method, allows for the specific recognition of the bacteria from complex mixtures including shrimp samples. Aptamer-modified QDs (QD-apt) were employed to selectively capture and simultaneously detect the target bacteria with high sensitivity using the fluorescence of the labeled QDs. The signal intensity is amplified due to the high photostability of QDs nanoparticles, resulting in improved sensitivity over methods using individual dye-labeled probes. This proposed method is promising for the sensitive detection of other pathogenic bacteria in food stuff if suitable aptamers are chosen. The method may also provide another potential platform for the application of aptamer-conjugated QDs in flow cytometry.     

Synthesis of CdTe Quantum Dots with Tunable Photoluminescence Using Tellurium Dioxide as Tellurium Source

A simple and convenient method has been developed for synthesis of water‐soluble CdTe quantum dots (QDs) under ambient atmospheric conditions. In contrast to the traditional aqueous synthesis, green to red emitting CdTe QDs were prepared by using TeO₂ to replace Te or Al₂Te₃ as tellurium source in this method. The influences of experimental variables, including pH value, 3‐mercaptopropionic acid (MPA)/Cd and Te/Cd molar ratios, on the emission peak and photoluminescence (PL) quantum yield (QY) of the obtained CdTe QDs have been systematically investigated. Experimental results indicate that green to red emitting CdTe QDs with a maximum photoluminescence quantum yield of 35.4% can be prepared at pH 11.3 and n_(Cd):n_(Te):n_(MPA)=1:0.1:1.7.     

Detection of Newcastle disease virus with quantum dots-resonance light scattering system

A sensitive QDs-based RLS assay method for the detection of Newcastle disease virus (NDV) antibody has been developed. CdTe quantum dots (QDs) were conjugated with Newcastle disease virus and used as RLS-based probes to detect NDV antibody. The electrostatic interaction between CdTe QDs and NDV resulted in enhanced resonance light scattering (RLS) signal characterized at 555 nm. Upon the addition of NDV antibody, QDs-NDV formed dispersive immunocomplex that can decrease the RLS signal. The decreased RLS intensity at 555 nm (ΔI_RLS) was linearly proportional to the concentration of NDV antibody (C_anti-NDV) in the range of 0.5-50 ng/mL, with correlation coefficient of 0.974 and detection limit of 0.1 ng/mL under the optimization conditions. The proposed method was applied to the determination of NDV antibody in spiked samples with satisfactory results.     

Synthesis of aqueous CdTe quantum dots embedded silica nanoparticles and their applications as fluorescence probes

This paper presents the synthesis of aqueous CdTe QDs embedded silica nanoparticles by reverse microemulsion method and their applications as fluorescence probes in bioassay and cell imaging. With the aim of embedding more CdTe QDs in silica spheres, we use poly(dimethyldiallyl ammonium chloride) to balance the electrostatic repulsion between CdTe QDs and silica intermediates. By modifying the surface of CdTe/SiO₂ composite nanoparticles with amino and methylphosphonate groups, biologically functionalized and monodisperse CdTe/SiO₂ composite nanoparticles can be obtained. In this work, CdTe/SiO₂ composite nanoparticles are conjugated with biotin-labeled mouse IgG via covalent binding. The biotin-labeled mouse IgG on the CdTe/SiO₂ composite nanoparticles surface can recognize FITC-labeled avidin and avidin on the surface of polystyrene microspheres by protein-protein binding. Finally, the CdTe/SiO₂ composite nanoparticles with secondary antibody are used to label the MG63 osteosarcoma cell with primary antibody successfully, which demonstrates that the application of CdTe/SiO₂ composite nanoparticles as fluorescent probes in bioassay and fluorescence imaging is feasible.     

Gallium Sulfide Quantum Dots with Zinc Sulfide and Alumina Shells Showing Efficient Deep Blue Emission

Solution-processed quantum dot (QD) based blue emitters are of paramount importance in the field of optoelectronics. Despite large research efforts, examples of efficient deep blue/near UV-emitting QDs remain rare due to lack of luminescent wide band gap materials and high defect densities in the existing ones. Here, we introduce a novel type of QDs based on heavy metal free gallium sulfide (Ga₂S₃) and their core/shell heterostructures Ga₂S₃/ZnS as well as Ga₂S₃/ZnS/Al₂O₃. The photoluminescence (PL) properties of core Ga₂S₃ QDs exhibit various decay pathways due to intrinsic defects, resulting in a broad overall PL spectrum. We show that the overgrowth of the Ga₂S₃ core QDs with a ZnS shell results in the suppression of the intrinsic defect-mediated states leading to efficient deep-blue emission at 400 nm. Passivation of the core/shell structure with amorphous alumina yields a further enhancement of the PL quantum yield approaching 50 % and leads to an excellent optical and colloidal stability. Finally, we develop a strategy for the aqueous phase transfer of the obtained QDs retaining 80 % of the initial fluorescence intensity.     

Three-dimensional porous reduced graphene oxide decorated with MoS2 quantum dots for electrochemical determination of hydrogen peroxide

Three-dimensional (3D) graphene-based nanomaterials have shown wide applications in electrochemical fields such as biosensors. In this study, we displayed a simple fabrication of 3D structural reduced graphene oxide (3D structural RGO) decorated with molybdenum disulfide quantum dots (MoS₂QDs) through a three-step reaction process. With its abundant raw materials, this strategy is economic and non-toxic. Various characterization techniques were utilized to characterize the morphologies of the synthesized MoS₂QDs, graphene oxide (GO), and 3D structural RGO-MoS₂QDs composites. Simultaneously, X-ray photoelectron spectroscopy was applied to characterize the structure and properties of composites. In order to understand the effects of the reaction period on the structure of 3D structural RGO-MoS₂QDs, a series of samples with various reaction periods were prepared for morphological characterization. Finally, the fabricated 3D structural RGO-MoS₂QDs composites were used to modify a glassy carbon electrode as an electrochemical non-enzymatic hydrogen peroxide (H₂O₂) sensor. The obtained results indicate that the fabricated electrochemical H₂O₂ sensor exhibits a wide detection range (0.01–5.57 mM), low detection limit (1.90 μM), good anti-interference performance, and long-time stability (18 days).     

One-pot synthesis of CdTe quantum dots using tellurium dioxide as a tellurium source in aqueous solution

A novel route has been developed for the synthesis of l-cysteine (Cys)-capped CdTe quantum dots (QDs) in an aqueous medium. Compared with previous reports, this synthesis was carried out in air atmosphere with one pot by using TeO₂ to replace Te or Al₂Te₃ as tellurium source. The mechanism for the formation of CdTe QDs is elucidated. The influences of various experimental variables on the luminescent properties of the obtained CdTe QDs have been systematically investigated, including refluxing time, pH value, Cd/Cys and Cd/Te molar ratios. Furthermore, the obtained QDs were characterized by Fourier transform infrared spectra, X-ray powder diffraction, and transmission electron microscopy, respectively. The results demonstrate that the obtained QDs have zincblende crystal structure with a sphere-like shape. Under the optimized experimental conditions, green- to yellow-emitting CdTe QDs with a maximum photoluminescence quantum yield of 14.6 % can be obtained.     

Highly-controllable imprinted polymer nanoshell at the surface of silica nanoparticles based room-temperature phosphorescence probe for detection of 2,4-dichlorophenol

This paper reports a facile and general method for preparing an imprinted polymer thin shell with Mn-doped ZnS quantum dots (QDs) at the surface of silica nanoparticles by stepwise precipitation polymerization to form the highly-controllable core–shell nanoparticles (MIPs@SiO₂–ZnS:Mn QDs) and sensitively recognize the target 2,4-dichlorophenol (2,4-DCP). Acrylamide (AM) and ethyl glycol dimethacrylate (EGDMA) were used as the functional monomer and the cross-linker, respectively. The MIPs@SiO₂–ZnS:Mn QDs had a controllable shell thickness and a high density of effective recognition sites, and the thickness of uniform core–shell 2,4-DCP-imprinted nanoparticles was controlled by the total amounts of monomers. The MIPs@SiO₂–ZnS:Mn QDs with a shell thickness of 45 nm exhibited the largest quenching efficiency to 2,4-DCP by using the spectrofluorometer. After the experimental conditions were optimized, a linear relationship was obtained covering the linear range of 1.0–84 μmol L⁻¹ with a correlation coefficient of 0.9981 and the detection limit (3σ/k) was 0.15 μmol L⁻¹. The feasibility of the developed method was successfully evaluated through the determination of 2,4-DCP in real samples. This study provides a general strategy to fabricate highly-controllable core–shell imprinted polymer-contained QDs with highly selective recognition ability.     

Integrated synthesis and ripening of AgInS2 QDs in droplet microreactors: An update fluorescence regulating via suitable temperature combination

Aqueous phase synthesized ternary I–III–VI₂ Quantum dots (QDs) are getting more and more attention in biology researches, for their good biocompatibility and easy-to-adjust fluorescence properties. However, the quantum yield (QY) of these aqueous phase synthesized QDs are often pretty low, which seriously hindered their further applications in this field. In general, the ripening of the QDs helps to enhance their QY, closely related to the ripening temperature. But it is still hard to precisely control the fluorescence performance of the QDs products, due to the difficulties in precise temperature control and cumbersome temperature adjusting operations in batch reactors. Here we proposed an integrated droplet microfluidic chip for the automated and successive AgInS₂ QDs synthesis and ripening, with both temperatures controlled independently, precisely but easily. Taking advantage of the space-time transformation of the droplet microfluidic chips, the suitable temperature combination for AgInS₂ QDs synthesis and ripening was studied, and the high-performance AgInS₂ QDs were obtained. In addition, the reason for the decrease of QY of AgInS₂ QDs at higher ripening temperature was also explored.     

Colloidal nano-MOFs nucleate and stabilize ultra-small quantum dots of lead bromide perovskites

The development of synthetic routes to access stable, ultra-small (i.e. <5 nm) lead halide perovskite (LHP) quantum dots (QDs) is of fundamental and technological interest. The considerable challenges include the high solubility of the ionic LHPs in polar solvents and aggregation to form larger particles. Here, we demonstrate a simple and effective host–guest strategy for preparing ultra-small lead bromide perovskite QDs through the use of nano-sized MOFs that function as nucleating and host sites. Cr₃O(OH)(H₂O)₂(terephthalate)₃ (Cr-MIL-101), made of large mesopore-sized pseudo-spherical cages, allows fast and efficient diffusion of perovskite precursors within its pores, and promotes the formation of stable, ∼3 nm-wide lead bromide perovskite QDs. CsPbBr₃, MAPbBr₃ (MA⁺ = methylammonium), and (FA)PbBr₃ (FA⁺ = formamidinium) QDs exhibit significantly blue-shifted emission maxima at 440 nm, 446 nm, and 450 nm, respectively, as expected for strongly confined perovskite QDs. Optical characterization and composite modelling confirm that the APbBr₃ (A = Cs, MA, FA) QDs owe their stability within the MIL-101 nanocrystals to both short- and long-range interfacial interactions with the MOF pore walls.

We demonstrate a simple and effective host–guest strategy for preparing ultra-small lead bromide perovskite QDs through the use of nano-sized MOFs that function as nucleating and host sites.     

One-pot synthesis of strongly luminesencing CdTe quantum dots and their conjugation with mouse antibody to alpha-fetoprotein

In this paper, strongly luminescent CdTe quantum dots (QDs) were synthesized in aqueous solution by a facile one-pot method. The CdTe QDs were synthesized in a weakly acidic or neutral buffer solution composed of sodium borate (Na₂B₄O₇) and sodium citrate (C₆H₅Na₃O₇). The pH of buffer solution and the ratio of the precursors were systematically optimized; the high-quality CdTe QDs with progressively increasing fluorescence during 60 days storage were obtained. As-prepared QDs can be conjugated with a mouse antibody alpha-fetoprotein via the reaction mediated by N-hydroxysuccinimide and 1-ethyl-3(3-dimethylaminopropyl) carbodiimide hydrochloride. The conjugate showed a red shift of 9 nm for the emission position.