Dielectric,ferroelectric and field-induced strain behavior of K0.5Na0.5NbO3-modified Bi0.5(Na0.78K0.22)0.5TiO3 lead-free ceramics

Lead-free piezoelectric (1 ? x)Bi_0.5(Na_0.78K_0.22)_0.5TiO₃–xK_0.5Na_0.5NbO₃ (BNKT–xKNN, x = 0–0.10) ceramics were synthesized using a conventional, solid-state reaction method. The effect of KNN addition on BNKT ceramics was investigated through X-ray diffraction (XRD), dielectric, ferroelectric and electric field-induced strain characterizations. XRD revealed a pure perovskite phase with tetragonal symmetry in the studied composition range. As the KNN content increased, the depolarization temperature (T_d) as well as maximum dielectric constant (?_m) decreased. The addition of KNN destabilized the ferroelectric order of BNKT ceramics exhibiting a pinched-type hysteresis loop with low remnant polarization (11 μC/cm²) and small piezoelectric constant (27 pC/N) at 3 mol% KNN. As a result, at x = 0.03 a significant enhancement of 0.22% was observed in the electric field-induced strain, which corresponds to a normalized strain (S_max/E_max) of ～434 pm/V. This enhancement is attributed to the coexistence of ferroelectric and non-polar phases at room temperature.     

Lead-free BaTiO3-Bi0.5Na0.5TiO3-Na0.73Bi0.09NbO3 relaxor ferroelectric ceramics for high energy storage

A series of (1-x)(0.65BaTiO₃-0.35Bi_0.5Na_0.5TiO₃)-xNa_0.73Bi_0.09NbO₃ ((1-x)BBNT-xNBN) (x = 0–0.14) ceramics were designed and fabricated using the conventional solid-state sintering method. The microstructure, dielectric property, relaxor behavior and energy storage property were systematically investigated. X-ray diffraction results reveal a pure perovskite structure and dielectric measurements exhibit a relaxor behavior for the (1-x)BBNT-xNBN ceramics. The slim polarization electric field (P-E) loops were observed in the samples with x ≥ 0.02 and the addition of Na_0.73Bi_0.09NbO₃ (NBN) could decrease the remnant polarization (P_r) of the (1-x)BBNT-xNBN ceramics obviously. The sample with x = 0.08 exhibits the highest energy storage density of 1.70 J/cm³ and the energy storage efficiency of 82% at 172 kV/cm owing to its submicron grain size and high relative density. These results show that the (1-x)BBNT-xNBN ceramics may be promising lead-free materials for high energy storage density capacitors.     

Phase structure,ferroelectric properties,and electric field-induced large strain in lead-free 0.99[(1−x)(Bi0.5Na0.5)TiO3-x(Bi0.5K0.5)TiO3]–0.01Ta piezoelectric ceramics

Lead-free 0.99[(1−x)(Bi_0.5Na_0.5)TiO₃-x(Bi_0.5K_0.5)TiO₃]–0.01Ta piezoelectric ceramics were prepared by a conventional solid-state reaction process. The ferroelectric properties, and strain behaviors were characterized. Increase of the (Bi_0.5K_0.5)TiO₃ content induces a phase transition from coexistence of ferroelectric tetragonal and rhombohedral to a relaxor pseudocubic phase. Accordingly, the ferroelectric order is disrupted significantly with the increase of (Bi_0.5K_0.5)TiO₃ content and the destabilization of the ferroelectric order is accompanied by an enhancement of the unipolar strain, which peaks at a value of 0.35% (corresponding to a large signal d₃₃ of 438 pm/V) in samples with 20 mol% (Bi_0.5K_0.5)TiO₃ content. Temperature dependent measurements of both polarization and strain from room temperature to 120 °C suggested that the origin of the large strain is due to a reversible field-induced nonpolar pseudocubic-to-polar ferroelectric phase transformation.     

Lead-free Bi1/2(Na0.82K0.18)1/2TiO3 relaxor ferroelectrics with temperature insensitive electrostrictive coefficient

The electric field-induced strain of Bi_1/2(Na_0.82K_0.18)_1/2TiO₃ (BNKT) ceramics modified with BaZrO₃ (BZ) was investigated as a function of composition and temperature. Unmodified BNKT ceramics revealed a typical ferroelectric butterfly-shaped bipolar S–E loop at room temperature, whose normalized strain (S_max/E_max) showed a significant temperature coefficient of 0.38 pm/V/K. As the BZ content increased in the solid solution up to 5 mol%, the ferroelectric BNKT gradually transformed to a relaxor. Finally, 5 mol% BZ-modified BNKT ceramics showed a typical electrostrictive behavior with a thermally stable electrostrictive coefficient (Q₃₃) of 0.025 m⁴/C², which is comparable to that of Pb(Mg_1/3Nb_2/3)O₃ (PMN) ceramics that have been primarily used as Pb-based electrostrictive materials.     

Field-induced large strain in lead-free 0.99[(1−x) Bi0.5(Na0.80K0.20)0.5TiO3–xBiFeO3]–0.01(K0.5Na0.5)NbO3 piezoelectric ceramics

Lead-free 0.99[(1−x) Bi_0.5(Na_0.80K_0.20)_0.5TiO₃–xBiFeO₃]–0.01(K_0.5Na_0.5)NbO₃ (BNKT20–100xBF–1KNN) piezoelectric ceramics were fabricated through conventional techniques. Results showed that changes in BF content of BNKT20–100xBF–1KNN induced transition from the ferroelectric phase to the ergodic relaxor phase. These changes also significantly disrupted long-range ferroelectric order, thereby correspondingly adjusting the ferroelectric-relaxor transition point T_F-R to room temperature. A large strain of 0.39% at the electric-field of 80 kV/cm (corresponding to a large signal d₃₃^* of 488 pm/V) was obtained at x=0.06, which originated from the composition proximity to the ferroelectric-relaxor phase boundary. Moreover, the high-strain material exhibited exceptional fatigue resistance (up to 10⁶ cycles) as a result of the reversible field-induced phase transition. The proposed material exhibits potential for novel ultra-large stroke and nonlinear actuators that require enhanced cycling reliability.     

Microstructure,ferroelectric and piezoelectric properties of Bi0.5K0.5TiO3-modified BiFeO3–BaTiO3 lead-free ceramics with high Curie temperature

The effects of composition, sintering temperature and dwell time on the microstructure and electrical properties of (0.75 ? x)BiFeO₃–0.25BaTiO₃–xBi_0.5K_0.5TiO₃ + 1 mol% MnO₂ ceramics were studied. The ceramics sintered at 1000 °C for 2 h possess a pure perovskite structure and a morphotropic phase boundary of rhombohedral and pseudocubic phases is formed at x = 0.025. The addition of Bi_0.5K_0.5TiO₃ retards the grain growth and induces two dielectric anomalies at high temperatures (T₁ ～ 450–550 °C and T₂ ～ 700 °C, respectively). After the addition of 2.5 mol% Bi_0.5K_0.5TiO₃, the ferroelectric and piezoelectric properties of the ceramics are improved and very high Curie temperature of 708 °C is obtained. Sintering temperature has an important influence on the microstructure and electrical properties of the ceramics. Critical sintering temperature is 970 °C. For the ceramic with x = 0.025 sintered at/above 970 °C, large grains, good densification, high resistivity and enhanced electrical properties are obtained. The weak dependences of microstructure and electrical properties on dwell time are observed for the ceramic with x = 0.025.     

Dielectric and ferroelectric properties of (1 − x)BaTiO3–xBi0.5Na0.5TiO3 ceramics

Lead-free (1 − x)BaTiO₃–xBi_0.5Na_0.5TiO₃ (x = 0.01, 0.02, 0.05, 0.1, 0.2, 0.3) ferroelectric ceramics were fabricated by the conventional ceramic technique. Sintering was made at 1200 °C for 2–4 h in air atmosphere. The crystal structure was investigated by X-ray diffraction. The dielectric and ferroelectric properties were also studied. Room temperature permittivity was found to decrease as Bi_0.5Na_0.5TiO₃ (BNT) content increases. Only the sample with 0.3 mol BNT was found to have relaxor behaviour. The T_c shifted slightly only for BNT addition lower than 0.1 mol. The highest T_c (about 150 °C) was obtained for 0.2 mol BNT addition. The remanent polarization, P_r, decreases whereas the coercive field, E_c, increases monotonously as the BNT content increases.     

Grain size control of lead-free Li0.06(Na0.5K0.5)0.94NbO3 piezoelectric ceramics by Ba and Ti doping

In this study, Ba- and Ti-doped Li_0.06(Na_0.5K_0.5)_0.94NbO₃ [(1 ? x)Li_0.06(Na_0.5K_0.5)_0.94NbO₃–xBaTiO₃ (x = 0–0.07)] ceramics were prepared by using conventional solid state reaction method, and the microstructure and electric properties of these samples were investigated. The grain size distribution of non-doped Li_0.06(Na_0.5K_0.5)_0.94NbO₃ ceramics was relatively wide. The microstructure was composed of grains ranging 1.1–5.0 μm in size. However, with increasing Ba and Ti content, the grain size distribution became narrow and the average grain size decreased from 2.0 to 0.9 μm in size. In particular, the microstructure of x = 0.07 sample was composed of grains ranging 0.5–2.2 μm in size. As a result, the frequency dispersion of dielectric constant for the (1 ? x)Li_0.06(Na_0.5K_0.5)_0.94NbO₃–xBaTiO₃ (x = 0–0.07) ceramics was reduced and the mechanical quality factor Q_m was enhanced with increasing Ba and Ti content.     

The electrical properties of (1−x)(Bi0.5Na0.5TiO3–Bi0.5K0.5TiO3–BaTiO3)–xCaZrO3 lead-free piezoelectric ceramics

Lead-free (1−x)(0.0852Bi_0.5Na_0.5TiO₃–0.12Bi_0.5K_0.5TiO₃–0.028BaTiO₃)–xCaZrO₃ piezoelectric ceramics (BNT−BKT−BT−xCZ, x=0, 0.01, 0.02, 0.03, 0.04 and 0.05) were prepared by using a conventional solid-state reaction method. The effects of CZ-doping on the structural, dielectric, ferroelectric and piezoelectric properties of the BNT−BKT−BT−xCZ system were systematically investigated. The polarization and strain behaviors indicated that the long-range ferroelectric order in the unmodified BNT−BKT−BT ceramics was disrupted by the increase of CZ-doping content, and correspondingly the depolarization temperature (T_d) shifted down from 109 °C to below room temperature. When x>0.03, accompanied with the drastic decrease in the remnant polarization (P_r) and piezoelectric coefficient (d₃₃), the electric-field-induced strain was enhanced significantly. A large unipolar strain of 0.35% under an applied electric field of 70 kV/cm (S_max/E_max=500 pm/V) was obtained in the BNT−BKT−BT−0.04CZ ceramics at room temperature, which was attributed to the reversible electric-field-induced phase transition between the relaxor and ferroelectric phases.     

Ferroelectric Bi(Na,K)TiO3-based materials for lead-free piezoelectrics

A lead-free piezoelectric materials of Cu-doped Bi_0.5(Na_0.79K_0.21)TiO₃ (BNKT–xCu) have been synthesized using a conventional ceramic process. The addition of a small amount of CuO increased the d₃₃-value up to 156 pC/N for BNKT–0.6Cu, while the large amout of CuO (>0.6 mol%) decreased it down to 80 pC/N for BNKT–2.0CuO. However, it was found that the mechanical quality factor (Q_m) was not increased until the CuO content was less then 0.6 mol%, but it was significantly increased when CuO exceeded 0.6 mol%, resulting from the development of small defect. The inverse dielectric permittivity followed the Curie–Weiss law above the deviation temperature (T_dev.) at high temperatures for the BNKT–xCu. The thermal hysteresis for BNKT–xCu confirmed that with an increase in the amount of CuO addition, the variation of the temperature in dielectric permittivity maximum (T_m) increased gradually while the depolarization temperature (T_d) decreased during the heating and the cooling cycles.     

Effects of K0.5Bi0.5TiO3 addition on dielectric properties of BaTiO3 ceramics

(1?x)BaTiO₃–xK_0.5Bi_0.5TiO₃ (abbreviated as BT–KBT, 0.10≦x≦0.15) dielectric ceramics were prepared by a conventional oxide mixing method. The effects of KBT content on the densification, microstructure and dielectric properties of BT ceramics were investigated. The density characterization results show that the addition of KBT significantly lowered the sintering temperature of BT ceramics to about 1280 °C. The XRD results showed that the phase compositions of all samples were pure tetragonal phases. The dielectric constant and dielectric loss firstly increased and then decreased with the increase of KBT. In addition, dielectric constant and dielectric loss versus frequency were characterized in the frequency range from 100 Hz to 2 MHz. It is found that the dielectric constant and the dielectric loss changed with the increase of KBT contents regularly.     

Tuning the ferroelectric-relaxor transition temperature in NBT-based lead-free ceramics by Bi nonstoichiometry

In this study, the Bi-nonstoichiometric 0.99Bi_x(Na_0.8K_0.2)_0.5TiO₃-0.01SrTiO₃ (BNKST) ceramics with x = 0.5–0.535 mol (Bi50-Bi53.5) were prepared by a conventional solid-state reaction method. The effects of Bi excess on structural transition and ferroelectric stability of BNKST ceramics were systematically investigated by the Raman spectra, dielectric analyses and electromechanical measurements. The introduction of excess Bi³⁺ could significantly break the long-range ferroelectric order and favor the presence of relaxor phase, then the ferroelectric-relaxor transition temperature (T_FR) can be effectively tuned to around room temperature by Bi nonstoichiometry, giving rise to an enhanced room-temperature strain property. The positive strain S_pos and dynamic piezoelectric constant d₃₃^* of Bi52.5 critical composition reach 0.33% and 440 pm/V, respectively at 6 kV/mm. The high recoverable strain of Bi52.5 sample can be attributed to the electric-field-induced reversible relaxor-ferroelectric phase transition. The present work may be helpful for further understanding and designing high-performance NBT-based lead-free ceramics for piezoelectric actuator applications.     

A novel ((Bi0.5Na0.5)0.94Ba0.06)1-x (K0.5Nd0.5)xTiO3 lead-free relaxor ferroelectric ceramic with large electrostrains at wide temperature ranges

Novel ((Bi_0.5Na_0.5)_0.94Ba_0.06)_1-x(K_0.5Nd_0.5)_xTiO₃(x = 0.0, 0.02, 0.04, 0.06) lead-free ceramics (BNBT–xKN) were prepared by the solid-state reaction method. The effects of A-site (K_0.5Nd_0.5)²⁺ complex-ion substitution on their phase structure, dielectric, piezoelectric, and electromechanical properties were studied. The X-ray diffraction results indicate that all compositions are located in the morphotropic phase boundary (MPB) region where the tetragonal phase coexists with the rhombohedral phase. In addition, as the KN content increases, the ferroelectric order transform to relaxor order, which is characterized by a degeneration of maximum polarization, remnant polarization and correspondingly adjusts the ferroelectric-relaxor transformation temperature (T_F-R) to room temperature. Interestingly, the disruption of ferroelectric phase caused a significant improvement of strains. A maximum strain of ~ 0.52% corresponding to normalized strain of ~ 612 pm/V appeared at 85 kv/cm for the x = 0.04 composition. Particularly, the composition of x = 0.04 exhibited high electrostrains of temperature insensitivity, which remained above 0.4% and kept within 10% from ambient temperature up to 110 °C. It can be ascribed to the coexistence of non-ergodic and ergodic states in the relaxor region. As a result, the systematic investigations on the BNBT–xKN ceramics can benefit the developments of temperature-insensitive “on-off” actuators.     

Low temperature sintering of lead-free Bi0.5(Na0.82K0.18)0.5TiO3 piezoelectric ceramics by co-doping with CuO and Nb2O5

Effect of excess CuO additive on the sintering behavior and piezoelectric properties of Bi_0.5(Na₈₂K_0.18)_0.5TiO₃ ceramics was investigated. The addition of small amount of excess CuO as low as 1 mol% was quite effective to lower the sintering temperature (T_s) of BNKT ceramics down to 975 °C while their piezoelectric properties were degraded by Cu doping. However, the electric field-induced strain was markedly enhanced by further addition of Nb₂O₅ with CuO without elevating T_s. The normalized strain S_max/E_max of 427 pm/V was obtained with a specimen sintered with 0.02 mol CuO and 0.03 mol Nb₂O₅ in excess.     

Dielectric,ferroelectric and field-induced strain response of lead-free (Fe,Sb)-modified (Bi0.5Na0.5)0.935Ba0.065TiO3 ceramics

Lead-free piezoelectric ceramics (Bi_0.5Na_0.5)_0.935Ba_0.065Ti_1−x(Fe_0.5Sb_0.5)_xO₃ (BNBT6.5–xFS, x=0.005, 0.010, 0.015, 0.020) were prepared by a conventional solid sintering technique. The effects of B-site doping of (Fe, Sb) on the phase structure, microstructure, dielectric, ferroelectric, and piezoelectric properties of BNBT6.5 ceramics were systematically investigated. Results showed that (Fe, Sb) can completely diffuse in the BNBT6.5 lattice in the all studied components. The addition of (Fe, Sb) destroyed the ferroelectric long-range order, and thus promoted the electric field induced strain response. The maximum electric field-induced strain (S_max=0.37%) with normalized strain (d₃₃*=S_max/E_max=454 pm/V) at an applied electric field of 80 kV/cm was obtained at x=0.015. Temperature dependent measurements of both polarization and strain from room temperature to 120 °C suggested that the origin of the large strain is due to a reversible field-induced ergodic relaxor to ferroelectric phase transformation.     

Polarization and strain behaviors of 0.74BiNaTiO3–0.26SrTiO3/Bi0.5(Na0.8K0.2)0.5TiO3 ceramic composite

We investigated the temperature- and frequency-dependent polarization and strain of two bismuth-based perovskite materials, a matrix material and a seed material, with which we formed a composite whose properties we likewise investigated. The chosen matrix material is 0.74Bi_0.5Na_0.5TiO₃–0.26SrTiO₃ (BNT-ST) which has a transition point of ~65 °C, from the relaxor to the ferroelectric phase (T_R-F). The seed material was Bi_0.5(Na_0.8K_0.2)_0.5TiO₃ (BNKT), which possesses a T_R-F of 120 °C. Different polarization and strain behaviors were observed in the BNT-ST/BNKT composite at different test temperatures. At T=25 °C (<T_R-F of the relaxor BNT-ST), the composite exhibited a hysteretic polarization loop and parabolic strain curves which involve an ergodic relaxor-to-normal ferroelectric phase transition with application of an external electric field and the reverse ferroelectric-to relaxor phase transition with removal of the field. When T=80 and 100 °C (>T_R-F °f the relaxor BNT-ST and <T_R-F of the ferroelectric BNKT), the BNT-ST/BNKT has a slim polarization loop and strain magnitudes that are slightly increased from those of pure BNT-ST. When T=120 °C (~T_R-F of the ferroelectric BNKT), the composite has a very slim polarization loop and strain behavior with values that are almost same as those of pure BNT-ST. In addition, the P-S relation for the BNT-ST/BNKT is identical to that of BNT-ST as the operating frequency increases up to 100 Hz. This may be because the polarization of BNT-ST is lower than that of BNKT. The electric field-induced polarization and strain of the BNT-ST/BNKT composite with respect to the temperature and frequency are related to the thermal stability of the ferroelectric seed and the degree of the phase transition in the relaxor matrix.     

Temperature stability and phase transition of Li0.02(KxNa1−x)0.98NbO3 ceramics

Li_0.02(K_xNa_1?x)_0.98NbO₃(x = 0.35–0.55) ceramics were prepared using the conventional solid state sintering method. The thermal behaviors of Li-modified (K_xNa_1?x)NbO₃ ceramics were investigated from ?30 to 150 °C, and the effect of Na/K ratio in (K_xNa_1?x)NbO₃ ceramics on thermal behavior and electrical properties was also studied. In the case of Li_0.02(K_xNa_1?x)_0.98NbO₃ ceramics with 0.5 wt.% ZnO, the transition temperature was sharply decreased because of a phase transition as the composition range of x was 0.425–0.475. From the results of the temperature dependence of piezoelectric properties, it is assumed that the Na-rich phase is less stable than the K-rich phase for temperature change.     

Electrocaloric effect and pyroelectric energy harvesting of (0.94 − x)Na0.5Bi0.5TiO3-0.06BaTiO3-xSrTiO3 ceramics

Ceramics with the composition (0.94 − x)Na_0.5Bi_0.5TiO₃–0.06BaTiO₃–xSrTiO₃ (NBBSTx) where x = 0.10, 0.15, 0.20, and 0.25 were synthesized by a conventional solid-state reaction method to investigate their electrocaloric effect (ECE) and pyroelectric energy harvesting (PEH) properties. The ferroelectric, dielectric, and pyroelectric properties of the prepared ceramics were measured and discussed. It is found that the strontium titanate (ST) content and bias field greatly affect the ferroelectric–relaxor transition. Increasing ST content lowers the depolarization temperature of the ceramics, and both the ECE and PEH behavior of the ceramics strongly depend on their ST content because of the composition-induced decrease of the ferroelectric–relaxor transition temperature. The present investigation demonstrates that the ECE and PEH properties of NBBSTx ceramics can be tuned by introducing ST. Furthermore, a high PEH density of 425 kJ/m³ is obtained for NBBST0.20, which is much higher than those of conventional Pb-based ferroelectrics.     

Phase transition and electrical properties of Bi0.5(Na0.8K0.2)0.5ZrO3 modified (K0.52Na0.48)(Nb0.95Sb0.05)O3 lead-free piezoelectric ceramics

In this work, (1−x)(K_0.52Na_0.48)Nb_0.95Sb_0.05O₃−xBi_0.5(Na_0.8K_0.2)_0.5ZrO₃ [abbreviated as (1−x)KNNS−xBNKZ, x=0–0.06] lead-free ceramics were fabricated using solid-state reaction method. The effects of BNKZ contents on the phase structure, piezoelectric and ferroelectric properties were investigated. The phase boundaries including orthorhombic-tetragonal (O-T) and rhombohedral-tetragonal (R-T) multiphase coexistence were identified by XRD patterns and temperature-dependent dielectric constant by adding different content of BNKZ. A giant field induced strain (~0.25%) along with converse piezoelectric coefficient d₃₃^* (~629.4 pm/V) and enhanced ferroelectricity P_r (~38 μC/cm²) were obtained when x=0.02, while the specimen with x=0.03 presented the optimal piezoelectric coefficient d₃₃ of 215 pC/N, due to the O-T or R-T phase coexistence near room temperature respectively. These results show that the introduction of Bi_0.5(Na_0.8K_0.2)_0.5ZrO₃ is a very effective way to improve the electrical properties of (K_0.52Na_0.48)(Nb_0.95Sb_0.05)O₃ lead-free piezoelectric ceramics.     

Effects of Mn doping on dielectric properties and energy-storage performance of Na0.5Bi0.5TiO3 thick films

Lead-free Na_0.5Bi_0.5Ti_1−xMn_xO₃ (NBTMn_x, x=0, 0.01, 0.03 and 0.05) ferroelectric thick films have been fabricated on LaNiO₃/Si(100) substrate by using a polyvinylpyrrolidone-modified sol-gel method and the effects of Mn content on their microstructure, dielectric properties and energy-storage performance were investigated. Compared with the pure Na_0.5Bi_0.5TiO₃ (NBT) thick films, NBTMn_x thick films exhibited a large enhancement in dielectric properties and energy-storage performance. Particularly, a giant recoverable energy-storage density (W) of 30.2 J/cm³ and the corresponding efficiency (η) of 47.7% were obtained in NBTMn_0.01 thick film at 2310 kV/cm. Moreover, the NBTMn_0.01 thick film displayed good energy-storage stability over a large temperature range at different frequency.