二维二氧化硅改性聚环氧乙烷基固态聚合物电解质用于增强锂离子电池性能

通过改性由酸蚀二维蛭石制备的二维二氧化硅,得到带正电荷的二维介孔二氧化硅(PSN⁺)纳米片,并将PSN⁺用作聚环氧乙烷(PEO)基固体聚合物电解质(SPEs)的填料。由于PSN⁺具有丰富的正电荷,PSN⁺与锂盐解离的阴离子能够有效结合,从而促进锂离子的运输,获得较好的锂离子转移数。在50 ℃时,基于PSN⁺的SPEs表现出较高的离子电导率(7.5×10^-5 S·cm^-1),锂离子迁移数为0.30,稳定电压窗为4.41 V。因此,组装后的LiFePO₄锂电池在50 ℃、0.2C下具有优异的初始放电比容量(155.7 mAh·g^-1),在循环100次后容量保持率为97.1%。     

通过金属离子刺激调节金属有机骨架结构用于光催化CO2还原

通过自组装得到一种具有适中配位键强度和适度骨架柔性的二维Cd基金属有机骨架(MOF){[Cd (HL)(BPY)_0.5(H₂O)]·2H₂O}_n(1),其中H₃L=4,4′,4″-(亚硝基三(亚甲基))三苯甲酸,BPY=4,4′-联吡啶)。由于其独特的结构特征,在金属离子(Zn²⁺/Ni²⁺/Co²⁺)刺激下,1逐渐转变成相应金属离子主导的MOF结构2、3和4。在此过程中,随着金属离子Cd²⁺→Zn²⁺、Cd²⁺→Ni²⁺和Cd²⁺→Co²⁺的交换,1通道中自由的Cd²⁺和L3-与MOF的骨架进行融合,导致通道空间的扩大,发生次级构筑单元(SBU)的转变,进而形成可调节的骨架。光催化二氧化碳还原结果表明,由离子交换所得到的新结构在催化效率上并没有很大改观,但在产物选择性上却有极大地提升(其中配合物3展示出100%的CO选择性)。     

GdPO4:Sm3+荧光粉的焙烧温度和掺杂浓度的优化及发光和磁性能

以GdPO₄为基质,Sm³⁺为激活剂,采用水热法合成了纳米荧光粉前驱体,分别在800、900、1 000、1 100和1 200℃下焙烧,得到一系列GdPO₄:Sm³⁺荧光粉。首先探究了GdPO₄:Sm³⁺的最佳焙烧温度;其次研究了Sm³⁺掺杂浓度对GdPO₄:Sm³⁺荧光性能的影响;最后研究了GdPO₄:2% Sm³⁺的高温荧光性能和磁性能。使用X射线衍射仪(XRD)、扫描电子显微镜(SEM)、磁强计和荧光分光光度计(FL)对荧光粉的晶体结构、形貌、发光和磁性能进行了表征。结果表明:荧光粉的晶体结构由前驱体六方晶系GdPO₄·H₂O:Sm³⁺变为单斜晶系的GdPO₄:Sm³⁺,形貌由纳米棒变为无规则块体。当焙烧温度为1 000℃,Sm³⁺掺杂浓度为2%时,荧光粉的发光强度和荧光寿命达到最大值。GdPO₄:2% Sm³⁺中Sm³⁺之间能量传递类型为电偶极-电偶极相互作用,能量传递的临界距离为1.646~1.884 nm。最佳样品GdPO₄:2% Sm³⁺有优异的热稳定性,热猝灭活化能为-0.157 eV,且具有良好的顺磁性,质量磁化率为1.22×10^-4 emu·g^-1·Oe^-1。     

二维层状Ti3C2Tx-MXene@VS2用于高性能锂离子电池负极

为探索一种高性能的锂离子电池负极材料,采用酸刻蚀法制备了高导电性、高稳定性的二维层状Ti₃C₂T_x,通过溶剂热法制备了具有高理论比容量的花瓣状VS₂纳米片,再经过简单的液相混合得到了二维层状Ti₃C₂T_x-MXene@VS₂复合物。通过扫描电子显微镜、透射电子显微镜、X射线光电子能谱、X射线衍射和能谱分析对复合材料的形貌和结构进行了表征,采用循环伏安、恒流充放电、长循环和交流阻抗谱对复合材料的电化学性能进行了研究。结果表明：VS₂纳米片均匀地分布在Ti₃C₂T_x的层间及表面,该复合物具有高的可逆容量(电流密度为0.1A·g^-1时,比容量为610.5mAh·g^-1)、良好的倍率性能(电流密度为2A·g^-1时,比容量为197.1mAh·g^-1)和良好的循环稳定性(电流密度为0.2 A·g^-1时,循环600圈后比容量为874.9 mAh·g^-1;电流密度为2 A·g^-1时,循环1 500圈后比容量为115.9mAh·g^-1)。     

阳离子(从有机铵到无机阳离子)对fac-[Fe(CO)3I3]-阴离子的稳定性和毒性的调节

通过无机碘盐(MI_n)与cis-[Fe (CO)₄I₂]反应制备了5个盐类化合物fac-M[Fe (CO)₃I₃]_n(Mⁿ⁺=Na⁺(1),K⁺(2),Mg²⁺(3),Ca²⁺(4),NH⁴⁺(5)),探讨了阳离子Mⁿ⁺对fac-[Fe (CO)₃I₃]^-阴离子的稳定性和细胞毒性的影响。通过傅里叶变换红外光谱(FTIR)监测,发现盐1~5在DMSO、D₂O、生理盐水等介质中均能缓释CO,其释放动力学符合一级反应动力学模型;还发现溶液中碘离子的浓度和酸度对该阴离子的缓释CO性能也具有调节作用。通过噻唑蓝(MTT)实验评估了盐1~5对膀胱癌细胞的毒性,其24 h半抑制浓度(IC₅₀)在25~43 μmol·L^-1。与有机铵阳离子类的盐化合物相比,盐1~5在含水介质中的释放CO速率下降,毒性亦有下调。研究还发现这类fac-[Fe (CO)₃I₃]^-阴离子在缓释CO的同时释放碘自由基,并能导致线粒体活性氧(ROS)水平、Parkin蛋白表达均上调。铁死亡抑制剂(Ferrostatin-1和Liproxstatin-1)试验结果表明这类化合物可能引发铁死亡通路并促进肿瘤细胞死亡。     

钒掺杂对正极材料LiFePO4/C的电化学性能影响

以LiH₂PO₄和廉价的Fe₂O₃为原料,葡萄糖为有机碳源,通过选择高价V⁵⁺进行铁位掺杂固相合成碳包覆复合改性的LiFe_1-xV_xPO₄/C（x=0,0.01,0.03,0.05,0.07,0.1）材料。700℃下处理得到结晶性好、电化学性能良好、较高振实密度ρ=1.2g·cm^-3的材料。X射线光电子能谱（XPS）测试结果表明掺入的钒为高价态V⁵⁺,能产生更多的过剩电子,从而提高了电子电导率,且V⁵⁺的掺入没有改变Fe的价态。交流阻抗测试结果进一步证明了V⁵⁺的掺入降低了电荷迁移阻抗,提高了材料的电子电导率。其中优化的材料LiFe_0.95V_0.05PO₄显示了不同倍率下良好的充放电比容量,在0.1C、1C、2C和5C倍率的放电比容量分别为155、146.5、135.3和125.9mAh·g^-1,5C循环500次后容量为119.5mAh·g^-1,容量保持率为94.9%,材料循环性能较好,具有良好的实际应用价值。     

一个对2,4,6-三硝基苯酚和Fe3+离子具有双重荧光传感行为的层状镉(Ⅱ)-有机配位聚合物

通过水热法合成了一个由三连接的2,3-喹啉二甲酸桥联扭曲的Cd²⁺八面体形成的二维层状配位聚合物[Cd（QDA）]_n（1）。该配合物发射出较强的蓝色荧光并具有很高的热稳定性和化学稳定性。更为重要的是,该配合物在乙醇分散体系中可快速识别痕量的2,4,6-三硝基苯酚和Fe³⁺离子,其对2,4,6-三硝基苯酚的淬灭常数（K_sv）和检测限（LOD）分别为6.61×10⁴ L·mol^-1和0.83 μmol·L^-1,对Fe³⁺离子的淬灭常数和检测限分别为1.74×10⁴ L·mol^-1和2.70 μmol·L^-1。     

双阳离子体系高通量丝光沸石膜的合成及其乙酸脱水应用

采用多种表征技术详细研究了碱金属阳离子对丝光沸石分子筛膜生长和渗透汽化性能的影响。结果表明,Li⁺、Na⁺、K⁺和Cs⁺以及Na⁺-Li⁺、Na⁺-K⁺和Na⁺-Cs⁺的不同离子组合对丝光沸石分子筛膜的形貌和性能有很大影响。研究发现,碱金属阳离子通过促进硅在初始凝胶中的溶解,在硅铝酸盐的重排过程中起到结构导向作用,进而起到构筑丝光沸石晶体骨架结构的作用。Na⁺对丝光沸石晶体的结晶有明显的促进作用,而Li⁺、K⁺和Cs⁺在相同的结晶时间内表现出较慢的结晶速率。在合成凝胶中用K⁺代替少量Na⁺可以显著改善膜表面的亲水性。特别是合成凝胶中Na⁺/K⁺比（n_Na⁺/n_K⁺）为2时,形成了更致密、更亲水的丝光沸石分子筛膜,显示出更高的渗透汽化性能。对于90℃下HAc质量分数为90%的HAc/H₂O混合物的分离,该膜显示出2.67 kg·m^-2·h^-1的高渗透通量和约为4 000的分离因子。此外,最优条件下合成的丝光沸石分子筛膜在90℃下长达240 h渗透汽化分离90%的HAc/H₂O混合物依然显示优越的酸稳定性。     

基于金纳米棒刻蚀比色法检测铁、铜离子

采用种子生长法制备金纳米棒(AuNRs)以构建光学传感器,用于Fe³⁺和Cu²⁺的高选择性快速可视化检测。在酸性环境中,Fe³⁺和Cu²⁺通过与KI溶液反应,将I-氧化成I2。I2刻蚀AuNRs,导致其纵向表面等离子体共振(LSPR)吸收峰蓝移,从而实现对Fe³⁺和Cu²⁺的检测。结果表明,反应温度为50℃时,添加0.8 mL 0.1 mol·L^-1 HCl、2 mL AuNRs生长液和20 mmol·L^-1 KI溶液,与2 mL 500 μmol·L^-1 Fe³⁺或30 μmol·L^-1 Cu²⁺反应25或90 min,可将AuNRs刻蚀至LSPR吸收峰消失。该方法对Fe³⁺和Cu²⁺检测具有高选择性和准确性,对于Fe³⁺、Cu²⁺共存体系的检测,可通过加入适量F-与Fe³⁺生成配合物[FeF₆]^3-完成对Fe³⁺的化学掩蔽,消除Fe³⁺的干扰,实现共存体系中Cu²⁺的准确检测。     

刚性双(三氮唑)和羧酸混合配体构建的两种金属有机骨架材料及其在CO2环加成反应中的催化性质

通过酸碱混合配体策略合成了 2 例含刚性双三氮唑配体的金属有机骨架(MOF)材料：{[Zn₂(L)(TP)₂(H₂O)·H₂O]}_n (1)和[Zn(L)(HTMA)]_n (2),其中L=4,4''-(3,3''-dimethyl-(1,1''-biphenyl)-4,4''-diyl)bis(4H-1,2,4-triazole),H₂TP=对苯二甲酸,H₃TMA=1,3,5-均苯三甲酸。用单晶 X 射线衍射表征其结构。结构分析表明,MOF 1显示出 3,6-双节点的二维结构,其拓扑符号为(4²·6)₂(4⁸·6⁶·8),MOF 2呈现为经典的 sql二维拓扑结构。在温和条件下,2对 CO₂与环氧化物的环加成反应具有优异的催化活性,且重复使用至少3次后仍然保持其催化性能。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Copper catalyzed/mediated synthetic methodology for ebselen and related isoselenazolones

Scope of the copper catalyzed/mediated selenium-nitrogen coupling reaction has been studied for the synthesis of isoselenazolones. It is noticed that the 2-chloro, 2-bromo-, and 2-iodo-aryl amides substrates can be exploited in the selenium-nitrogen coupling reaction by employing 25-100 mol % of CuI/1,10-phenanthroline (L) and potassium carbonate as a base in DMF. Furthermore, electron rich 2-chloro-arylamides also underwent selenium-nitrogen coupling reaction to give biologically important selenium-nitrogen heterocycles. Also, copper-catalyzed selenium-nitrogen coupling reaction has been meticulously applied for the synthesis of diaryl diselenides having methoxy, amine, and amide functionality from respective aryl iodides in the presence of stoichiometric amount of succinimide as an external Se-N coupling partner.     

Knoevenagel condensation catalyzed by novel Nmm-based ionic liquids in water

A series of novel N-methyl morpholine (Nmm) based ionic liquids with 1,2-propanediol group were synthesized and used as catalysts for Knoevenagel condensation at room temperature in water. Under the effect of the catalyst, various aldehydes or aliphatic ketones could react with a wide range of activated methylene compounds well, including malononitrile, alkyl cyanoacetate, cyanoacetamide, β-diketone, barbituric acid, 2-arylacetonitrile and thiazolidinedione. Furthermore, most of the products could be separated just by filtrating and washing with water. Additionally, the catalyst is recyclable and applicable for the large-scale synthesis.     

Construction of polyheterocyclic spirotetrahydrothiophene derivatives via sulfa-Michael/aldol cascade reaction

A series of polyheterocyclic spirotetrahydrothiophene derivatives were obtained in moderate to excellent yields via a catalyst-free sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 under mild conditions. We also present the first asymmetric sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 with moderate to good enantioselectivities catalyzed by readily available chiral phase-transfer catalysts (PTCs).     

Suzuki-Miyaura reactions of the soluble guanylate cyclase inhibitor NS2028: a non-product specific route to C-8 substituted analogues

Both soluble guanylate cyclase (sGC) inhibitors ODQ 1 and NS2028 2 are synthesized via improved protocols. In the former case treating 3,4-dihydroquinoxalin-2(1H)-one oxime 8, which can be prepared in two steps from 1,2-benzenediamine, with 1,1′-carbonyldiimidazole (CDI) gives the dihydro-ODQ 10 that in the presence of KMnO₄ oxidises to give ODQ 1 in an overall yield of 46% starting from 1,2-benzenediamine. In the latter case, the synthesis affords NS2028 2 from 2-amino-4-bromophenol 3 in three steps with an overall yield of 85% and avoids the need for chromatography. Furthermore, Suzuki-Miyaura reaction conditions are described that enable the preparation of 8-aryl and 8-heteroaryl derivatives of NS2028 directly from NS2028 2. Finally, demethylation of the 8-(methoxyphenyl) substituted analogues afforded the 8-(hydroxyphenyl) derivatives 40-42. All new products are fully characterised.