Intelligent decision support system for the adaptive control of a flexible manufacturing system with machine and tool flexibility

This paper describes an intelligent decision support system (IDSS) for real time control of a flexible manufacturing system (FMS). The controller is capable of classifying symptoms in developing the control policies on FMSs with flexibility in operation assignment and scheduling of multi-purpose machining centres which have different tools with their own efficiency. The proposed system is implemented by coupling of rule-based IDSS, simulation block and centralised simulation optimiser for elicitation of shop floor control knowledge. This posteriori adaptive controller uses a new bilateral mechanism in simulation optimiser block for offline training of IDSS based on multi-performance criteria simulation optimisation. The proposed intelligent controller receives online information of the FMS current state and trigger appropriate control rule within real-time simulation data exchange. Finally the FMS intelligent controller is validated by a benchmark test problem. Application of this adaptive controller showed that it could be an effective approach for real time control of various flexible manufacturing systems.     

Design of delayed reconfigurable manufacturing system based on part family grouping and machine selection

To improve the convertibility of reconfigurable manufacturing system (RMS), the concept of delayed reconfigurable manufacturing system (D-RMS) was proposed. RMS and D-RMS are both constructed around part family. However, D-RMS may suffer from ultra-long system problem with unacceptable idle machines using generic RMS part families. Besides, considering the complex basic system structure of D-RMS, machine selection of D-RMS should be addressed, including dedicated machine, flexible machine, and reconfigurable machine. Therefore, a system design method for D-RMS based on part family grouping and machine selection is proposed. Firstly, a part family grouping method is proposed for D-RMS that groups the parts with more former common operations into the same part family. The concept of longest relative position common operation subsequence (LPCS) is proposed. The similarity coefficient among the parts is calculated based on LPCS. The reciprocal value of the operation position of LPCS is adopted as the characteristic value. The average linkage clustering (ALC) algorithm is used to cluster the parts. Secondly, a machine selection method is proposed to complete the system design of D-RMS, including machine selection rules and the dividing point decision model. Finally, a case study is given to implement and verify the proposed system design method for D-RMS. The results show that the proposed system design method is effective, which can group parts with more former common operations into the same part family and select appropriate machine types.     

Fuzzy logic based leanness assessment and its decision support system

Manufacturing organisations have been witnessing a transition from mass manufacturing to lean manufacturing. Lean manufacturing is focused on the elimination of obvious wastes occurring in the manufacturing process, thereby enabling cost reduction. The quantification of leanness is one of the contemporary research agendas of lean manufacturing. This paper reports a study which is carried out to assess the leanness level of a manufacturing organisation. During this research study, a leanness measurement model has been designed. Then the leanness index has been computed. Since the manual computation is time consuming and error-prone, a computerised decision support system has been developed. This decision support system has been designated as FLBLA-DSS (decision support system for fuzzy logic based leanness assessment). FLBLA-DSS computes the fuzzy leanness index, Euclidean distance and identifies the weaker areas which need improvement. The developed DSS has been test implemented in an Indian modular switches manufacturing organisation.     

Plant-level maintenance decision support system for throughput improvement

In the current global scenario of extreme competition, factors such as productivity, availability, quality and cost of operations play a vital role in the success of a company. A critical component relating to all of the above is maintenance. The conventional maintenance decision support systems have primarily focused on maximising the gains of a single machine system. However, a real life application usually consists of multiple machines, and the operational level decisions are more complex. In this paper, an on line plant-level maintenance decision support system (PMDSS) is developed by combining the short term and long term decision making process to improve the overall system performance while continuously attempting to maximise immediate profits in the short term. The PMDSS works towards two basic aims: (1) unplanned downtime reduction by predicting the remaining useful life of the machines, and (2) efficient utilisation of the finite maintenance and production resources through identifying the throughput-critical machines. The benefits of this approach are presented by considering an industrial case study of an automotive assembly line. The results obtained using this PMDSS approach shows a big throughput improvement as compared to the conventional maintenance policies.     

An integrated decision support system for strategic supply chain optimisation in process industries: the case of a zinc company

We introduce a menu-driven user-friendly decision support system (DSS) for supply chain planning based on optimisation. The DSS is based on a multi-source (supplier), multi-destination (warehouse) network having multiple manufacturing facilities, with multiple materials and multiple storage areas. This integrated supply chain model performs multiple period planning. The use of this DSS requires little knowledge of management sciences tools. We discuss the need for an integrated approach towards supply chain modelling for the process industry. We present the integrated model in the form of a database structure. We validate the model with the real data of a zinc company and demonstrate the impact of optimisation in terms of percentage improvement. The result shows that it is possible to improve unit contribution to profit from 1.89 to 4.66%.     

Towards building an intelligent decision support system for project management

Management of large projects, especially the ones in which a major component of R&D is involved and those requiring knowledge from diverse specialised and sophisticated fields, may be classified as semi-structured problems. In these problems, there is some knowledge about the nature of the work involved, but there are also uncertainties associated with emerging technologies. In order to draw up a plan and schedule of activities of such a large and complex project, the project manager is faced with a host of complex decisions that he has to take, such as, when to start an activity, for how long the activity is likely to continue, etc. An Intelligent Decision Support System (IDSS) which aids the manager in decision making and drawing up a feasible schedule of activities while taking into consideration the constraints of resources and time, will have a considerable impact on the efficient management of the project. This report discusses the design of an IDSS that helps in project planning phase through the scheduling phase. The IDSS uses a new project scheduling tool, the Project Influence Graph (PIG).     

Justification for the selection of manufacturing technologies: a fuzzy-decision-tree-based approach

In this paper, a developed model for the justification of alternative manufacturing technologies is presented. The approach, based on fuzzy decision trees, provides a methodology capable of identifying patterns within a technology case repository to support the evaluation of manufacturing systems. Experts are highly influential individuals in the decision process; they provide support and guidance when selecting investments. The experience-oriented task is founded on previous cases or an experts’ experience, and therefore difficult to express in a rational form. The concept is based on a number of characteristics of the case-based reasoning, rule induction and expert system theory. Structured around the fuzzy-decision-tree data-mining technique, the framework provides the ability of using regulated case information to act as structured experience for assisting in the decision process. Fuzzy induction extracts formal rules from a set of experience data, and the expert system philosophy computes the experience base of human expertise for problem-solving. A test case indicates the stability of the classification algorithm and verifies the applicability within the domain.     

Modelling robustness for manufacturing processes: a critical review

‘Robustness’ is an important concept used in quality engineering for the improvement of quality in a manufacturing process. A process which is insensitive to noise variation is called a robust process. The robustness is modelled by several researchers and practioners for its design and implementation in a manufacturing process. A review of all these approaches is essential in order to assess their strengths, limitations and applicability under different process conditions and constraints. Over the years, many of these approaches have found widespread application in measuring, assessing and modelling of process robustness in manufacturing and other industries. In this paper, an attempt has been made to review critically the existing approaches as proposed and applied for measuring and evaluating robustness of manufacturing processes. Based on the critical appraisal, the key issues are identified and a generic framework for modelling and measuring of process robustness in single- and multi-stage manufacturing processes is presented.     

Congruence of manufacturing decision areas in a production system: a research framework

A well designed production system secures environmental and internal fit. Environmental fit in a production system refers to alignment of manufacturing decisions to the external settings such as product and market. Internal fit implies that manufacturing decisions are mutually supportive. This paper develops a framework to analyse congruence of manufacturing decision areas in a production system. The framework considers six broad manufacturing decision areas. Based on the literature review, 54 decision types and alternative decision choices for each decision type are identified. The subjective and/or objective constructs to measure decision type are presented which should be useful in designing construct and in data gathering to conduct empirical research. Using the proposed framework, many research questions concerning the settings of several decision types for a specific type of production system can be generated and empirically tested.     

Use of the manufacturing system design decomposition for comparative analysis and effective design of production systems

The focus of this paper is on the use of the Manufacturing System Design Decomposition (MSDD) to make effective cost and production system design decisions. A comparative study is conducted to illustrate how and why the total cost is reduced when the functional requirements defined by the MSDD are achieved. The ultimate goal of this research was to advance manufacturing and production system development to being guided by engineering science and design rather than the common practice of duplicating another person’s or entity’s notion of the best physical implementation.     

Simulation platform for anticipative plant-level maintenance decision support system

Global competition and increasing customer expectations are forcing automobile manufacturers to improve their operations. Maintenance, being one of the most critical components in many industries, has a direct impact on the improvement of the overall production performance. In this paper, we introduce an anticipative plant-level maintenance decision support system (APMDSS) that provides guidance on corrective and preventive maintenance priorities based on the equipment bottleneck ranks with the objective of improving daily plant throughput. APMDSS anticipates the plant dynamics (i.e. bottlenecks, hourly buffer levels and likelihood of machine breakdowns) for upcoming shifts using starting state information of the production shift (e.g. equipment maintenance history, operational status of machines, buffer levels and scheduled production model mix). We also evaluate the performance of APMDSS using real data from an automotive body shop experiencing routine throughput difficulties due to frequent machine breakdowns. The results are compared with other methods from the literature and found to be superior in many settings.     

Object-oriented modelling of manufacturing information system for collaborative design

Object-oriented technology has been widely acclaimed as offering a revolution in computing that is resolving a myriad of problems inherent in developing and managing organisational information processing capabilities. Although its foundations arose in computer programming languages, object-oriented technology has implications for a wide range of business computing activities including: programming, analysis and design, information management, and information sharing. The problematic issues in the development of manufacturing software systems are related to the various characteristics of manufacturing systems, which are wide, dynamic and complex. Design for manufacturing (DFM) is the integrated practice of designing components while considering their manufacturability, and its benefits are widely acknowledged in the industry. A model has been developed using object oriented technology, after analysing the fundamental elements necessary for modelling manufacturing and process planning framework used in collaborative design and manufacturing in machine tool manufacturing. The main components of this model are: process planning model (PPM), manufacturing activity model (MAM), manufacturing resource model (MRM) and manufacturing cost and time model. We are using ontologies in conjunction with specific conceptual models, which can contribute to improve the interoperability between these models. The performance of this model is shown by means of one real world case. The developed manufacturing information based design tool integrated with an intelligence design system can be used for collaborative design and manufacturing, which will support machine tool designers’ to achieve cost effective and timely design.     

A reliable decision support system for fresh food supply chain management

The paper proposes a decision support system (DSS) for the supply chain of packaged fresh and highly perishable products. The DSS combines a unique tool for sales forecasting with order planning which includes an individual model selection system equipped with ARIMA, ARIMAX and transfer function forecasting model families, the latter two accounting for the impact of prices. Forecasting model parameters are chosen via two alternative tuning algorithms: a two-step statistical analysis, and a sequential parameter optimisation framework for automatic parameter tuning. The DSS selects the model to apply according to user-defined performance criteria. Then, it considers sales forecasting as a proxy of expected demand and uses it as input for a multi-objective optimisation algorithm that defines a set of non-dominated order proposals with respect to outdating, shortage, freshness of products and residual stock. A set of real data and a benchmark – based on the methods already in use – are employed to evaluate the performance of the proposed DSS. The analysis of different configurations shows that the DSS is suitable for the problem under investigation; in particular, the DSS ensures acceptable forecasting errors and proper computational effort, providing order plans with associated satisfactory performances.     

A technology selection framework for integrating manufacturing within a supply chain

This paper describes a structured analytical approach for selecting a manufacturing technology. A framework consisting of six integrated steps is proposed by considering the growing importance of supply chains in manufacturing organisations. The framework makes use of the analytical hierarchy process (AHP) approach combined with strategic assessment model (SAM) to evaluate and select the technologies appropriate for providing overall competitive advantage. The framework is intended to assist industrial managers in promoting manufacturing and supply chain collaboration and co-ordination by including intra-organisational perspective in their organisational technology selection decision making process.     

A review of synthesis methods for additive manufacturing

With the design freedoms afforded by additive manufacturing (AM) processes, an increasing interest in shape synthesis methods has led to a variety of advances in topology optimisation methods and associated synthesis technologies. In this paper, we identify research issues related to the application of AM to shape synthesis methods, review recent advances in topology optimisation, and outline a vision for future synthesis capabilities.     

A method for the concurrent design and analysis of networked manufacturing systems

Multistage manufacturing processes (MMPs) require multiple stations and operations. Traditionally, analysis of MMPs focused on material planning and control strategies. For a given MMP, the effect of the strategy on the volume and rate of production, ability to handle product type variability, and the effects of process variability on production rate, on-process inventory, etc., have been studied individually. Such approaches, while necessary, do not address the combined effects of MMP design choices on the final product quality. In this article, a method based on the compromise decision support problem and stream of variation model is proposed to provide a way to evaluate suitable designs for the implementation of MMPs. Using the dimensional quality of the product as a measure of quality, the proposed method is illustrated using a three-stage MMP in an automobile panel stamping process while considering the conflicting requirements of diagnosability and controllability.     

Development of an integrated model for process planning and parameter selection for machining processes

The concept of ‘do it right the first time’ in the machining industry not only expects the best quality products but also at the best possible cost. The cost of machining depends on intelligent process planning and selection of machining parameters such as speed, feed, and depth of cut. The problem of machining parameter selection has received great attention by researchers and many techniques have been developed. A review of these techniques reveals that the selection of the machine and cutting tool is done before the process of cutting parameter selection and process sequencing, and often the selection is based on experience. The current research is an attempt to develop an integrated model (ExIMPro: Expert system based Integrated model for Machining Processes) which finds the sequence of operations with set of machines, tools, and other process parameters to minimise the cost of machining for a cylindrical part. This system consists of existing expert system Machining Parameter SELection (MPSEL) for machine and tool selection and a Microsoft Excel® and Visual Basic® based parameter selection model. The present model focuses on turning and cylindrical grinding operations but other processes can be incorporated with little modification to the software.     

多单元制造系统布局设计

从布局设计的角度,提出多单元制造系统的概念,把各种制造系统的布局问题转化为多单元制造系统布局设计问题,包括设备布局和制造单元布局两个方面。对于设备布局问题,给出一种优化建模与虚拟现实技术相结合的求解策略;对于单元布局问题,给出一种集成的布局设计方法。     

A decision framework for maximising lean manufacturing performance

Since the development of the original value stream mapping (VSM) by Taichi Ohno at Toyota, a number of authors have suggested several additional VSM tools to understand and improve the value stream through waste reduction. A single best VSM tool, though effective in dealing with a certain waste type, becomes redundant as other wastes take centre stage and/or organisational priorities change. To overcome this, a decision framework based on a novel formulation of the integrated analytical hierarchy process (AHP) – pre-emptive goal programming (PGP) has been proposed. This framework not only guarantees accurate selection of an ideal VSM tool, based on the current organisation's priorities, but also aids the decision maker to arrive at the optimum implementation sequence of a chosen set of VSM tools to identify and reduce all wastes present in the system, thereby maximising organisational performance in the shortest timeframe.     

A hybrid learning-based model for on-line monitoring and diagnosis of out-of-control signals in multivariate manufacturing processes

In multivariate statistical process control, most multivariate quality control charts are shown to be effective in detecting out-of-control signals based upon overall statistics. But these charts do not relieve the need for pinpointing the source(s) of the out-of-control signals. In addition, these charts cannot provide more detailed process information, such as quantitative abnormal assessment values and visualisation of process changes, which would be very useful for quality practitioners to locate the assignable causes that give rise to the out-of-control situation. In this study, a hybrid learning-based model has been investigated for monitoring and diagnosing out-of-control signals in a bivariate process. In this model, a minimum quantisation error (MQE) chart based on the self-organization map (SOM) neural network (NN) was developed for monitoring process changes (i.e., mean shifts), and a selective NN ensemble approach (DPSOEN) was developed for diagnosing signals that are judged as out-of-control signals by MQE charts. The simulation results demonstrate that the proposed model outperforms the conventional multivariate control scheme in terms of average run length (ARL), and can accurately classify the source(s) of out-of-control signals. An extensive experiment is also carried out to examine the effects of six statistical features on the performance of DPSOEN.