Nanoporous Ni-based catalysts for hydrogen generation from hydrolysis of ammonia borane

We report nanoporous Ni, Ni–Fe, and Ni–Pt as catalysts for hydrogen generation from hydrolytic dehydrogenation of ammonia borane (NH₃BH₃, AB). The Ni and Ni–Fe nanoparticles with diameters of 20–25 nm were synthesized by a colloidal method in starch-containing aqueous solution. They exhibited considerable in situ catalytic performance but severely lost activity after separating from the reaction solution. Nanoporous Ni_1−xPt_x (x = 0.01, 0.08 and 0.19) with particle size below 5 nm was prepared from the isolated Ni nanoparticles through a replacement reaction. After centrifugation, drying, washing, and annealing, the obtained nanoporous Ni–Pt could attain remarkable activity, high hydrogen generation rate and efficiency, and low activation energy.     

CoMoB nanoparticles supported on foam Ni as efficient catalysts for hydrogen generation from hydrolysis of ammonia borane solution

We report on CoMoB nanoparticles supported on foam Ni as catalysts for hydrogen generation from hydrolysis of ammonia borane (NH₃BH₃) solution. The CoMoB/foam Ni catalysts with different molar ratios of Co²⁺and MoO₄²⁻ were synthesized via the electroless-deposition technique at ambient temperature. In order to analyze the phase composition, chemical composition, microstructure, and electron bonding structure of the as-prepared samples, powder X–ray diffraction (XRD), inductively coupled plasma-mass spectroscopy (ICP-MS), scanning electron microscopy (SEM), atomic force microscopy (AFM) and X-ray photoelectron spectroscopy (XPS) were used. The results showed that CoMoB nanoparticles were variously dispersed on the surface of the foam Ni and the catalytic activity correlated with the molar ratio of Co²⁺ and MoO₄²⁻. The highest hydrogen generation rate was 5331.0 mL min⁻¹ g_cat⁻¹ at 298 K, and the activation energy was calculated to be 45.5 kJ mol⁻¹ toward the hydrolysis of NH₃BH₃ solution. The better catalytic activity was largely attributed to the smaller particle size, higher surface roughness and the novel three-dimensional cone-like architectures of the obtained samples. The kinetic results show that the hydrolysis of NH₃BH₃ is a first-order reaction in catalyst concentration. In addition, the reusability experiment exhibited that the catalytic activity was reduced after 5 cycles and the reason of the decay was also investigated.     

Non-noble metallic nanoparticles supported on titania spheres as catalysts for hydrogen generation from hydrolysis of ammonia borane under ultraviolet light irradiation

Herein, a report on non-noble metal (Ni, Co, Cu, and their combination) nanoparticles (NPs) supported on TiO₂ spheres as catalysts for hydrogen generation via hydrolysis of ammonia borane (NH₃BH₃, AB) is provided. The TiO₂ spheres were prepared through a template method by using polystyrene (PS). The metallic nanoparticles were synthesized by a redox replacement reaction. The structure, morphology, and chemical composition of the obtained samples were analyzed by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) equipped with energy dispersive X-ray spectroscopy (EDX), and X-ray Photoelectron Spectroscopy (XPS). The characterization results showed that the metallic nanoparticles were well dispersed on the TiO₂ supports. The catalytic activity toward the hydrolysis of AB was found to correlate well with the amount of metallic elements in catalysts while for the multicomponent phases, a synergistic effect was noticed. Theoretical calculations revealed that Ni, Co, and Cu atoms significantly influenced the electronic behavior of TiO₂ and thereby, the catalytic properties of the materials.     

Tungsten(VI) oxide supported rhodium nanoparticles: Highly active catalysts in hydrogen generation from ammonia borane

Herein, we report the use of tungsten(VI) oxide (WO₃) as support for Rh⁰ nanoparticles. The resulting Rh⁰/WO₃ nanoparticles are highly active and stable catalysts in H₂ generation from the hydrolysis of ammonia borane (AB). We present the results of our investigation on the particle size distribution, catalytic activity and stability of Rh⁰/WO₃ catalysts with 0.5%, 1.0%, 2.0% wt. Rh loadings in the hydrolysis reaction. The results reveal that Rh⁰/WO₃ (0.5% wt. Rh) is very promising catalyst providing a turnover frequency of 749 min^?1 in releasing 3.0 equivalent H₂ per mole of AB from the hydrolysis at 25.0 °C. The high catalytic activity of Rh⁰/WO₃ catalyst is attributed to the reducible nature of support. The report covers the results of kinetics study as well as comparative investigation of activity, recyclability, and reusability of colloidal(0) nanoparticles and Rh⁰/WO₃ (0.5 % wt. Rh) catalyst in the hydrolysis reaction.     

Boron nitride supported NiCoP nanoparticles as noble metal-free catalyst for highly efficient hydrogen generation from ammonia borane

Herein, ternary metal phosphides NiCoP nanoparticles supported on porous hexagonal boron nitride (h-BN) was fabricated via hydrothermal-phosphorization strategy. The as-prepared Ni_0.8Co_1.2P@h-BN exhibited excellent catalytic performance for the hydrogen generation from ammonia borane (AB) hydrolysis, with an initial turnover frequency of 86.5 mol(H₂) mol(Ni_0.8Co_1.2P) ⁻¹ min⁻¹ at 298 K. The experimental outcome can be attributed to the synergistic effect between Ni, Co and P, as well as the strong metal-support interaction between NiCoP and h-BN. This study presents a new paradigm for supporting transition metal phosphides, and provides a new avenue to develop high performance and low cost non noble metal catalysts for hydrolysis of AB.     

Carbon-supported Ni3B nanoparticles as catalysts for hydrogen generation from hydrolysis of ammonia borane

We report the preparation of Ni₃B and carbon-supported Ni₃B (denoted as Ni₃B/C) nanoparticles, and their catalytic performance for hydrogen generation from hydrolytic dehydrogenation of ammonia borane (NH₃BH₃, AB). Ni₃B and Ni₃B/C were prepared via a chemical reduction and crystallization in tetraethylene glycol solution. The obtained Ni₃B catalysts are in well-defined crystalline state and Ni₃B/C catalysts have a high dispersion in the carbon. The hydrogen generation measurement shows that the carbon-supported Ni₃B presents enhanced catalyst activity during hydrolytic dehydrogenation of AB. Among the as-prepared Ni₃B/C catalysts, Ni₃B/C with 34.25 wt% Ni₃B loading displays the best catalytic activity, delivering a high hydrogen release rate of 1168 mL min⁻¹ g⁻¹ and the lower activation energy of 46.27 kJ mol⁻¹. The kinetic results show that the hydrolysis is a first-order reaction in catalyst concentration, while it is a zero-order in AB concentration. Furthermore, the Ni₃B/C is a recyclable catalyst under mild reaction conditions, indicating that the carbon-supported Ni₃B is a promising catalyst for AB hydrolytic dehydrogenation.     

Magnetically separable transition metal nanoparticles as catalysts in hydrogen generation from the hydrolysis of ammonia borane

It reviews the available reports on the preparation and use of magnetically separable transition metal nanoparticles (TMNs) as reusable catalysts for the hydrolytic dehydrogenation of ammonia borane (AB). After a short introduction, the review starts with the papers on the employment of intrinsically magnetic TMNs as catalysts for releasing H₂ gas from AB, which includes colloidal nanoparticles of intrinsically magnetic metals, TMNs in combination with materials having large surface area, and multimetallic composites containing at least one intrinsically magnetic metal together with an additional component usually acting as support or stabilizer. This is followed by a section reviewing the papers on core-shell multimetallic nanoparticles with one intrinsically magnetic metal in either core or shell used for catalyzing the hydrolysis of AB. It follows the review of papers on TMNs supported on Fe₃O₄, CoFe₂O₄, or Co₃O₄ forming magnetically separable catalysts for the same reaction. Then, a short section reviews the available reports on metal nanoparticles supported on carbon-coated iron. The last section gives a summary list of conclusions.     

Amino-group and space-confinement assisted synthesis of small and well-defined Rh nanoparticles as efficient catalysts toward ammonia borane hydrolysis

Hydrogen evolution from ammonia borane (AB) hydrolysis is of great importance considering the ever-increasing demand for green and sustainable energy. However, the development of a facile and efficient strategy to construct high-performance catalysts remains a grand challenge. Herein, we report an amino-group and space-confinement assisted strategy to fabricate Rh nanoparticles (NPs) using amino-functionalized metal-organic-frameworks (UiO-66-NH₂) as a NP matrix (Rh/UiO-66-NH₂). Owing to the coordination effect of amino-group and space-confinement of UiO-66-NH₂, small and well-distributed Rh NPs with a diameter of 3.38 nm are successfully achieved, which can be served as efficient catalysts for AB hydrolysis at room temperature. The maximum turnover frequency of 876.7 min^?1 is obtained by using the Rh/UiO-66-NH₂ with an optimal Rh loading of 4.38 wt% and AB concentration of 0.2 M at 25 °C, outperforming most of the previously developed Rh-based catalysts. The catalyst is also stable in repetitive cycles for five times. The high performance of this catalyst must be ascribed to the structural properties of UiO-66-NH₂, which enable the formation of small and well-dispersed Rh NPs with abundant accessible active sites. This study provides a simple and efficient method to significantly enhance the catalytic performance of Rh for AB hydrolysis.     

Co,Ni-based nanoparticles supported on graphitic carbon nitride nanosheets as catalysts for hydrogen generation from the hydrolysis of ammonia borane under broad-spectrum light irradiation

From the viewpoint of tailoring the atomic and nanoscale structures of semiconductors to enhance the solar-to-hydrogen energy conversion, we employed an in-situ gas template-assisted co-polymerization route, where melamine and 2,4,6-triaminopyrimidine were co-monomers and NH₄Cl was the in-situ gas template, to synthesize porous broad-spectrum light-responsive carbon nitride nanosheet (termed as CNN) species with increased π-electron availability. Then we developed CNN-supported Co and Ni nanoparticles (NPs) for catalytic hydrogen generation from aqueous ammonia borane (NH₃BH₃) under light irradiation (λ ≥ 420 nm) at room temperature. Though all the Co-based catalysts had the similar activities with total turnover frequency (TOF) values of 37.5–44.1 min⁻¹ in the dark, they exhibited significantly different and enhanced photocatalytic activities. Remarkably, the optimized catalyst had a total TOF value of 123.2 min⁻¹, exceeding the values of reported non-noble metal catalysts. Moreover, the porous CNN species possessed the C-substitution for N, tunable narrow bandgaps of 0.71–2.34 eV and efficient separation of photogenerated charge carriers. This resulted in the enriched electron density of metal NPs and the apparent quantum yield of 66.9% at 420 nm.     

The Hydroloysis of ammonia borane by using Amberlyst-15 supported catalysts for hydrogen generation

Resin catalysts have the advantage of having various properties and long lifetime due to their ability to be regenerated easily, which makes them attractive supports. In this paper, a comparative study was conducted to optimize the dehydrogenation reaction condition using two different types of support materials: alumina (Al₂O₃), and Amberlyst-15 and to improve the catalytic activity as well as preparing an efficient and low-cost system for practical application, ruthenium metal catalyst was incorporated on Amberlyst-15 resin (a sulfonic acid type based upon a styrene-divinylbenzene copolymer) to release H₂ via hydrolytic dehydrogenation of ammonia borane. Using ruthenium (Ru) catalysts based on Amberlyst-15 support material and comparing the results with Al₂O₃ as the common supporting material is considered to be studied for the first time. The effect of temperature (20–50 °C), the initial ammonia borane concentration (0.05–0.5 %wt), and catalyst amount (0.2–0.5 g) on the produced H₂ yield was also investigated. Ru@Amberlyst-15 nanoparticle was discovered to be an effective catalyst for hydrogen evolution via the hydrolysis of ammonia borane with a turnover frequency value (TOF) of 343.3 min^?1, while Ru@Al₂O₃ yielded a TOF of 87.5 min^?1 at the room temperature. Therefore, it can be concluded that the Amberlyst-15 supporting effect on ruthenium metal leads an increase in the hydrogen production rate.     

One-step synthesis of graphene supported Ru nanoparticles as efficient catalysts for hydrolytic dehydrogenation of ammonia borane

Ru nanoparticles supported on graphene have been synthesized via a one-step procedure using methylamine borane as reducing agent. Compared with NaBH₄ and ammonia borane, the as-prepared Ru/graphene NPs reduced by methylamine borane exhibit superior catalytic activity towards the hydrolytic dehydrogenation of ammonia borane. Additionally, the Ru/graphene NPs exhibit higher catalytic activity than its graphene free counterparts, and retain 72% of their initial catalytic activity after 4 reaction cycles. A kinetic study shows that the catalytic hydrolysis of ammonia borane is first order with respect to Ru concentration, the turnover frequency is 100 mol H₂ min⁻¹ (mol Ru)⁻¹. The activation energy for the hydrolysis of ammonia borane in the presence of Ru/graphene NPs has been measured to be 11.7 kJ/mol, which is the lowest value ever reported for the catalytic hydrolytic dehydrogenation of ammonia borane.     

Ruthenium(0) nanoparticles supported on nanotitania as highly active and reusable catalyst in hydrogen generation from the hydrolysis of ammonia borane

Ruthenium(0) nanoparticles supported on the surface of titania nanospheres (Ru(0)/TiO₂) were in situ generated from the reduction of ruthenium(III) ions impregnated on nanotitania during the hydrolysis of ammonia borane. They were isolated from the reaction solution by centrifugation and characterized by a combination of advanced analytical techniques. The results reveal that highly dispersed ruthenium(0) nanoparticles of size in the range 1.5–3.3 nm were formed on the surface of titania nanospheres. Ru(0)/TiO₂ show high catalytic activity in hydrogen generation from the hydrolysis of ammonia borane with a turnover frequency value up to 241 min⁻¹ at 25.0 ± 0.1 °C. They provide unprecedented catalytic lifetime measured by total turnover number (TTO = 71,500) in hydrogen generation from the hydrolysis of ammonia borane at 25.0 ± 0.1 °C. The report also includes the results of kinetic study on the catalytic hydrolysis of ammonia borane depending on the temperature to determine the activation energy of the reaction (E_a = 70 ± 2 kJ/mol) and the catalyst concentration to establish the rate law of the reaction.     

Enhanced catalytic performance of CuNi bimetallic nanoparticles for hydrogen evolution from ammonia borane hydrolysis

Ammonia borane (AB, NH₃BH₃) hydrolysis is an effective way to safely generate hydrogen. However, a suitable catalyst is indispensable because the hydrolytic reaction cannot take place kinetically at room temperature. In this work, CuNi alloy nanoparticles are immobilized on porous graphitic carbon nitride (g-C₃N₄) with a facile adsorption-chemical reduction method. Benefiting from the hierarchical porous structure of the support, the interesting alloy effect of Cu and Ni, as well as the synergistic effect between g-C₃N₄ and the CuNi alloys, the optimal Cu_0·7Ni_0.3/g-C₃N₄ catalyst displays excellent catalytic performance in AB hydrolysis, such as high turnover frequency (2.08 min⁻¹, at 303 K), low apparent activation energy (23.58 kJ mol⁻¹), and satisfactory durability. The results verify that the optimal catalyst has particular potential in hydrogen energy utilization due to the advantages such as the facile preparation procedure, low cost and excellent catalytic behavior.     

Hexagonal boron nitride supported ruthenium nanoparticles as highly active catalysts for ammonia borane hydrolysis

Ammonia borane (AB) hydrolysis is a comparative strategy for developing the sustainable hydrogen economy. Considering the hydrolysis cannot occur kinetically at low temperature, a suitable catalyst is indispensable. In this work, the dispersed ruthenium nanoparticles are stabilized on hexagonal boron nitride (h-BN) via an adsorption-in situ reduction procedure. Various characterization techniques are adopted for elucidating the structure-performance relationship of the obtained catalysts for the hydrolytic dehydrogenation of AB. In the presence of the resultant Ru/h-BN catalysts, the corresponding turnover frequency (1177.5 min^?1) in alkaline solution at 303 K and the apparent activation energy (24.1 kJ mol^?1) are superior to most literature previously reported. Our work provides a facile fabrication method for metal-based catalysts, which are highly promising in chemical storage material hydrolysis.     

Improving hydrogen production from the hydrolysis of ammonia borane by using multifunctional catalysts

A novel multifunctional catalytic system has been developed for efficient hydrogen generation through the hydrolysis of ammonia borane. This system combines Pd NPs with acid sites and amines, which are both task-specific functionalities able to destabilize the N → B dative bond. The acidity of the support (zeolites of different structure and SiO₂/Al₂O₃ ratio) used to disperse the Pd NPs causes an increase in the hydrogen production rate. However, the positive effect of incorporating p-phenylenediamine in the catalyst is much more pronounced, causing a two-fold increase in the activity of the catalyst. The combined effect of the different functionalities yields excellent performance in the hydrolysis of ammonia borane, greatly enhancing the activity of the metal-based catalyst and reducing the activation energy of the catalyzed reaction.     

Oxygen vacancies and morphology engineered Co3O4 anchored Ru nanoparticles as efficient catalysts for ammonia borane hydrolysis

Developing efficient but facile strategies to modulate the catalytic activity of Ru deposited on metal oxides is of broad interest but remains challenging. Herein, we report the oxygen vacancies and morphological modulation of vacancy-rich Co₃O₄ stabilized Ru nanoparticles (NPs) (Ru/V_O-Co₃O₄) to boost the catalytic activity and durability for hydrogen production from the hydrolysis of ammonia borane (AB). The well-defined and small-sized Ru NPs and V_O-Co₃O₄ induced morphology transformation via in situ driving V_O-Co₃O₄ to 2D nanosheets with abundant oxygen vacancies or Co²⁺ species considerably promote the catalytic activity and durability toward hydrogen evolution from AB hydrolysis. Specifically, the Ru/V_O-Co₃O₄ pre-catalyst exhibits an excellent catalytic activity with a high turnover frequency of 2114 min^?1 at 298 K. Meanwhile, the catalyst also shows a high durability toward AB hydrolysis with six successive cycles. This work establishes a facile but efficient strategy to construct high-performance catalysts for AB hydrolysis.     

Efficient hydrogen production from ammonia borane hydrolysis catalyzed by TiO2-supported RuCo catalysts

Hydrolysis of ammonia borane provides a reliable pathway for hydrogen production, while suitable catalysts are indispensable to make the hydrolysis reaction reach a considerable rate. In the present work, a series of TiO₂-supported RuCo catalysts have been fabricated by coprecipitation and subsequent reduction of Ru³⁺ and Co²⁺ on the surface of TiO₂ nanoparticles. Transmission electron microscopy and elemental mapping have verified the good distribution of metal species in the catalysts. The fabricated catalysts have shown excellent performance for catalyzing ammonia borane hydrolysis, especially in alkaline solutions with 0.5 M NaOH. For Ru₁Co₉/TiO₂ in which Ru/Co molar ratio is 1:9, the active energy of catalyzed ammonia borane hydrolysis is 33.25 kJ/mol, and a turnover frequency based on Ru as high as 1408 mol_H2/(mol_Ru·min) is obtained at 25 °C. Moreover, when different types of TiO₂ substrates are used, anatase TiO₂-supported catalysts show better catalytic activity than their counterparts with rutile TiO₂ as substrate or mixture of anatase and rutile TiO₂ as substrate.     

Magnetically recyclable Ni@h-BN composites for efficient hydrolysis of ammonia borane

The magnetic Ni@h-BN composites containing the uniform Ni nanoparticles supported on h-BN nanosheets have been prepared via a facile solvothermal method. The as-prepared samples show high catalytic performance for H₂ generation from the ammonia borane aqueous solution, especially for the Ni@h-BN with 25.0 wt% Ni content. Moreover, the Ni@h-BN composites possess a good ferromagnetic property at room temperature, endowing them with rapid magnetic separation to recycle. The kinetics of the hydrolysis of ammonia borane over the Ni@h-BN composites were further investigated in detail. It is found that the hydrogen generation was highly dependent on the catalyst amount and the reaction temperature. The activation energy of the hydrolysis reaction of ammonia borane is found to be 47.3 kJ mol^?1 over the Ni@h-BN with 25.0 wt% Ni content. Considering the good catalytic activities for H₂ release, the Ni@h-BN composites are expected to find important application in fuel cells and the related fields.     

Alumina nanofiber-stabilized ruthenium nanoparticles: Highly efficient catalytic materials for hydrogen evolution from ammonia borane hydrolysis

Effective catalysts for hydrogen generation from ammonia borane (AB) hydrolysis should be developed for the versatile applications of hydrogen. In this study, ruthenium nanoparticles (NPs) supported on alumina nanofibers (Ru/Al₂O₃-NFs) were synthesized by reducing the Ru(Ш) ions impregnated on Al₂O₃-NFs during AB hydrolysis. Results showed that the Ru NPs with an average size of 2.9 nm were uniformly dispersed on the Al₂O₃-NFs support. The as-synthesized Ru/Al₂O₃-NFs exhibited a high turnover frequency of 327 mol H₂ (mol Ru min)^?1 and an activation energy of 36.1 kJ mol^?1 for AB hydrolysis at 25 °C. Kinetic studies showed that the AB hydrolysis catalyzed by Ru/Al₂O₃-NFs was a first-order reaction with regard to the Ru concentration and a zero-order reaction with respect to the AB concentration. The present work reveals that Ru/Al₂O₃-NFs show promise as a catalyst in developing a highly efficient hydrogen storage system for fuel cell applications.     

Pd nanoparticles supported on MIL-101 as high-performance catalysts for catalytic hydrolysis of ammonia borane

Well dispersed ultrafine Pd NPs have been immobilized in the framework of MIL-101, and tested for the catalytic hydrolysis of ammonia borane. The powder XRD, N₂ adsorption–desorption, TEM, and ICP-AES were employed to characterize the Pd@MIL-101 catalyst. The as-synthesized Pd@MIL-101 exhibit the highest catalytic activity toward hydrolysis of AB among the Pd-based nano-catalysts ever reported, with the TOF value of 45 mol H₂ min⁻¹ (mol Pd)⁻¹.