Mode Ⅱ fracture analysis of double edge cracked circular disk subjected to different diametral compression

A detailed analysis of mode Ⅱ stress intensity factors(SIFs) for the double edge cracked Brazilian disk subjected to different diametral compression is presented using a weight function method. The mode Ⅱ SIFs at crack tips can be obtained by simply calculating an integral of the product of mode Ⅱ weight function and the shear stress on the prospective crack faces of uncracked disk loaded by a diametral compression. A semi-analytical formula for the calculation of normalized mode Ⅱ SIF, fⅡ , is derived for different crack lengths (from 0. 1 to 0.7) and inclination angles (from 10° to 75°) with respect to loading direction. Comparison between the obtained results and finite element method solutions shows that the weight function method is of high precision. Combined with the authors' previous work on mode Ⅰ fracture analysis, the new specimen geometry can be used to study fracture through any combination of mode Ⅰ and mode Ⅱ loading by a simple alignment of the crack relative to the diameter of compression loading, and to obtain pure mode Ⅱ crack extension. Another advantage of this specimen geometry is that it is available directly from rock core and is also easy to fabricate.     

Semi-analytical weight function method for center-cracked circular disk subjected to diametral compression

Ｓｉｎｃｅｔｈｅｃｅｎｔｅｒ ｃｒａｃｋｅｄｃｉｒｃｕｌａｒｄｉｓｋｓｐｅｃｉ ｍｅｎｃａｎｂｅａｖａｉｌａｂｌｅｄｉｒｅｃｔｌｙｆｒｏｍｒｏｃｋｃｏｒｅ ,ａｎｄｍｉｘｅｄ ｍｏｄｅｆｒａｃｔｕｒｅｒａｎｇｉｎｇｆｒｏｍｐｕｒｅｍｏｄｅⅠｔｏａｎｙＫⅡ/ＫⅠ ｒａｔｉｏｃａｎｂｅｅａｓｉｌｙａｃｈｉｅｖｅｄｕｓｉｎｇｔｈｉｓｇｅｏｍｅｔｒｙ ,ｉｔｉｓｗｉｄｅｌｙｕｓｅｄｉｎｔｈｅｍｉｘｅｄ ｍｏｄｅｆｒａｃｔｕｒｅｉｎｖｅｓｔｉｇａｔｉｏｎｏｆｂｒｉｔｔｌｅｍａｔｅｒｉａｌｓ .Ｔｈｅｐｒｏｂｌｅｍｃｏ…     

Use of double edge-cracked Brazilian disk geometry for compression-shear fracture investigation of rock

A new specimen geometry-the double edge-cracked Brazilian disk and a relevant fracture analysis by weight function method are proposed for the investigation of rock fracture caused by compression-shear loading. Not only can the mixed mode fracture with any ratio of KI /KII be achieved, but also the pure mode n crack extension can be obtained. The combined mode fracture analysis for this geometry shows that diametral compression in the far-field can induce a compression-shear stress state in the singular stress field ahead of crack tips. Experimental investigations conducted on marble specimens show that the pure mode [I crack extension can be obtained when the dimen-sionless crack length a>0. 7 and the inclined crack angle 5°≤ψ≤40°. Normalized mode I and mode II stress intensity factors decrease from -0. 45 and 2. 47 at ψ= 5° to - 1. 65 and 1. 52 at ψ=40°, respectively. The strains at three points of specimen are also measured in order to investigate the influence of stress singularity on initi     

Analysis of brittle fracture due to compressive loading using center-cracked Brazilian disk

Ｄｅｔｅｒｍｉｎａｔｉｏｎｏｆｆｒａｃｔｕｒｅｔｏｕｇｈｎｅｓｏｆｂｒｉｔｌｅｍａｔｅｒｉａｌｓｉｓｏｆｇｒｅａｔｉｍｐｏｒｔａｎｃｅｉｎｍｉｎｉｎｇａｎｄｇｅｏｌｏｇｉｃａｌｅｎｇｉｎｅｒｉｎｇ．Ａｖａｒｉｅｔｙｏｆｓｐｅｃｉｍｅｎｇｅｏｍｅｔ...     

Effect of specimen thickness on Mode II fracture toughness of rock

Anti-symmetric four-point bending specimens with different thickness, without and with guiding grooves, were used to conduct Mode II fracture test and study the effect of specimen thickness on Mode II fracture toughness of rock. Numerical calculations show that the occurrence of Mode II fracture in the specimens without guiding grooves (when the inner and outer loading points are moved close to the notch plane) and with guiding grooves is attributed to a favorable stress condition created for Mode II fracture, i.e. tensile stress at the notch tip is depressed to be lower than the tensile strength or to be compressive stress, and the ratio of shear stress to tensile stress at notch tip is very high. The measured value of Mode II fracture toughness K _{II C} decreases with the increase of the specimen thickness or the net thickness of specimen. This is because a thick specimen promotes a plane strain state and thus results in a relatively small fracture toughness. Foundation item: The National Natural Science Foundation of China (No: 49672164) Biography of the first author: RAO Qiu-hua, doctor of engineering, born in 1965, majoring in rock fracture mechanics.     

Microscopic characteristics of different fracture modes of brittle rock

Ａｓｕｒｖｅｙｏｆｆｒａｃｔｕｒｅｍｅｃｈａｎｉｃｓｌｉｔｅｒａｔｕｒｅｒｅ ｖｅａｌｓｔｈａｔｒｅｓｅａｒｃｈｗｏｒｋｏｎｒｏｃｋｆｒａｃｔｕｒｅｍｅｃｈａｎ ｉｃｓｈａｓｍａｉｎｌｙｆｏｃｕｓｅｄｏｎＭｏｄｅⅠｆｒａｃｔｕｒｅ (ｏｐｅｎ ｉｎｇｍｏｄｅ) ,ｉｎｐａｒｔｉｃｕｌａｒ,ｏｎＭｏｄｅⅠｆｒａｃｔｕｒｅｔｏｕｇｈｎｅｓｓｔｅｓｔｉｎｇ[1 2 ] .Ｈｏｗｅｖｅｒ,ｐｒｅ ｅｘｉｓｔｉｎｇｃｒａｃｋｓｉｎｒｏｃｋｍａｔｅｒｉａｌｓｏｒｄｉｓｃｏｎｔｉｎｕｉｔｉｅｓｉｎｒｏｃｋｍａｓｓｅｓａｒｅｓｅ…     

A composite material model for investigation of micro-fracture mechanism of brittle rock subjected to uniaxial compression

Ｓｔｕｄｙｏｎｔｈｅｒｏｃｋｆａｉｌｕｒｅｐｒｏｃｅｓｓｆｒｏｍｃｒａｃｋｉｎｉｔｉａｔｉｏｎ ,ｐｒｏｐａｇａｔｉｏｎｔｏｃｏａｌｅｓｃｅｎｃｅｉｓｖｅｒｙｉｍ ｐｏｒｔａｎｔｔｏｕｎｄｅｒｓｔａｎｄｔｈｅｆｒａｃｔｕｒｅｍｅｃｈａｎｉｓｍｏｆｂｒｉｔｔｌｅｒｏｃｋｕｎｄｅｒｕｎｉａｘｉａｌｃｏｍｐｒｅｓｓｉｏｎ .Ｍａｎｙｒｅ ｓｅａｒｃｈｅｒｓｔａｃｋｌｅｄｔｈｉｓｐｒｏｂｌｅｍａｔｔｈｅｍａｃｒｏｓｔｒｕ ｃｔｕｒｅｌｅｖｅｌ.ＨｏｒｉｉａｎｄＮｅｍａｔ Ｎａｓｓｅｒ[1,2 ] ｉｎｖｅｓｔｉｇａ ｔ…