在硅胶表面制备牛血红蛋白分子印迹聚合物

采用表面印迹法, 以乙烯基三甲氧基硅烷修饰的硅胶为载体, 丙烯酰胺为功能单体, N,N-亚甲基双丙烯酰胺为交联剂, 并将改性聚乙烯醇(PVA)作为辅助识别聚合物链(ARPCs)引入聚合体系中, 制备了牛血红蛋白分子印迹聚合物(MIP). 实验使用红外光谱分析了改性PVA的结构特征, 用扫描电镜(SEM)观察MIP的表面形貌, 考察了ARPCs的含量对MIP吸附性能的影响. 吸附动力学实验研究表明, 聚合体系中ARPCs的引入使MIP对模板牛血红蛋白(BHb)的吸附量明显提高|十二烷基磺酸钠-聚丙烯酰胺凝胶电泳(SDS-PAGE)结果显示, MIP对BHb的特异性吸附能力明显提高.     

三聚氰胺磁性表面分子印迹聚合物的制备及其在牛奶样品中的应用

以三聚氰胺（MEL）为模板分子、α-甲基丙烯酸（MAA）为功能单体、乙二醇二甲基丙烯酸酯（EGDMA）为交联剂、Fe₃O₄@SiO₂磁性材料为载体,制备得到三聚氰胺磁性表面分子印迹聚合物（MEL-MMIPs）。分别使用透射电镜（TEM）、热重分析（TGA）、傅立叶变换红外光谱（FT-IR）和振动样品磁强计（VSM）对制备的MMIPs进行表征。结果表明,印迹聚合物层成功地在Fe₃O₄@SiO₂磁性材料表面包覆,印迹粒子具有良好的磁学性能。将磁性分子印迹聚合物应用于牛奶中三聚氰胺的富集分离,采用高效液相色谱法（HPLC）检测,结果显示该磁性表面分子印迹聚合物对三聚氰胺有特异性吸附。以制备的MMIPs为吸附剂,建立了一种简单、快速和高选择性测定牛奶中三聚氰胺的方法。     

孔雀石绿分子印迹膜的制备和渗透性

以0.45 μm混合纤维素酯微孔膜为支载膜,丙烯酰胺为功能单体,N, N'-亚甲基双丙烯酰胺为交联剂,通过原位聚合法制备得到孔雀石绿分子印迹膜,并研究了其对模板分子和类似物的渗透性能。以分子印迹膜作为渗透膜,单一渗透实验中,13 h后MG的渗透量达到0.118×10^-3 g/cm²,而相同时间内甲基紫、甲酚红和溴百里酚蓝的渗透量分别为0.064×10^-3、0.057×10^-3和0.044×10^-3 g/cm²,且在竞争渗透中孔雀石绿的渗透速率没有发生明显变化,而甲基紫的渗透速率却显著下降。实验表明,分子印迹膜对模板分子孔雀石绿表现出良好的渗透选择性,且在与类似物甲基紫的竞争渗透中具有优先渗透能力。     

烟嘧磺隆分子印迹聚合物表面等离子共振传感器的制备与分析应用

利用分子印迹技术与表面等离子共振光谱联用, 建立了对磺酰脲类除草剂烟嘧磺隆的检测方法. 实验过程中, 探讨了pH值对分子印迹膜吸附目标化合物特性的影响, 并在最佳pH下对其吸附和选择性能进行了评价. 与非印迹聚合物相比, 烟嘧磺隆印迹聚合物对烟嘧磺隆吸附效率比烟嘧磺隆类似物高. 该方法的线性范围为5.0×10^－12～25× 10^－12 mol/L, 烟嘧磺隆和分子印迹聚合物之间的结合常数为1.6×10¹⁰ L/mol, 吉布斯自由能变化值为－58.148 kJ/mol. 研究结果表明该方法具有简单、快速、灵敏度高、重复性好等特点, 适用于自来水和土壤中磺酰脲类除草剂烟嘧磺隆的测定, 基于信噪比为3时, 自来水和土壤的检出限分别为5.62×10^－14和1.01×10^－13 mol/L, 平均回收率分别为85.6%和76.6%, 相对标准偏差分别为1.78%和3.21%.     

具有高选择性吸附的表面分子印迹磁性纤维素微球的制备与性能

以纤维素和纳米Fe₃O₄为原料制得磁性纤维素微球, 在纤维素微球表面选择合适的模板分子, 以甲基丙烯酸、 丙烯酰胺和N,N'-亚甲基双丙烯酰胺为功能单体, 采用水溶液聚合法制得表面分子印迹磁性纤维素微球. 采用傅里叶变换红外光谱(FTIR)、 X射线衍射(XRD)和振动样品磁强计(VSM)等表征了分子印迹聚合物微球的结构. 以罗丹明B(RhB)为模板分子, 通过吸附动力学与吸附热力学实验研究了表面分子印迹磁性纤维素微球对RhB的吸附性能, 结果表明, 制备的表面分子印迹磁性纤维素微球对罗丹明B具有特异性识别作用, 饱和吸附量达到0.542 mg/mg, 吸附平衡时间为10 h左右. 表面分子印迹磁性纤维素微球大大降低了对吸附环境的依赖, 并可重复利用.     

牛血清白蛋白和溶菌酶为双模板蛋白质的表面印迹聚合物的制备及吸附性能

采用反应条件温和的原子转移自由基聚合法(ATRP),以N-异丙基丙烯酰胺(NIPAAm)和丙烯酰胺(AAm)为功能单体,以N-(3-二甲氨基丙基)甲基丙烯酰胺(DMAPMA)为辅助功能单体,制备了以牛血清白蛋白(BSA)和溶菌酶(Lyz)为双模板蛋白质的表面印迹聚合物(Bi-MIP)。对印迹过程中辅助功能单体的量进行了考察,结果表明,在单一蛋白质溶液和混合蛋白质溶液中,当DMAPMA为20 μL时,制备的Bi-MIP对模板蛋白质BSA和Lyz有较好的吸附容量与选择性。通过静态吸附实验考察了Bi-MIP的吸附性能,并结合Langmuir吸附模型得到聚合物对模板蛋白质BSA和Lyz的最大吸附容量分别为10.2 mg/g和19.2 mg/g。且该印迹聚合物在实际样品中对模板蛋白质也表现出较强的吸附能力和较高的选择性。该方法将为复杂生物样品中同时对双/多种目标蛋白质的识别提供一种新的途径。     

以马来松香丙烯酸乙二醇酯为交联剂的茶碱分子印迹膜电化学传感器的研究

利用分子印迹技术, 以马来松香丙烯酸乙二醇酯为交联剂, 丙烯酸为功能单体研制了测定茶碱的新型电化学传感器. 以自由基热聚合的方式于玻碳电极表面制备茶碱分子印迹聚合物膜. 通过循环伏安法、电化学交流阻抗法及计时电流法研究了传感器对茶碱的响应特性. 结果表明, 在最佳的实验条件下, 传感器的峰电流与茶碱浓度在2.00×10^-7～3.45×10^-4 mol/L 范围内呈现出良好的线性关系(线性相关系数为0.9961), 检出限(S/N＝3)为1.00×10^-7 mol/L;该传感器的选择性高, 稳定性和重现性好, 将此传感器用于茶碱缓释片中茶碱的含量测定, 回收率为95.6%～103.8%.关键词 马来松香丙烯酸乙二醇酯; 茶碱; 分子印迹聚合物; 电化学传感器     

分子印迹电化学传感器选择性识别及电催化检测多巴胺

以多巴胺为模板分子、溴酚蓝为单体, 在玻碳电极表面制得分子印迹膜. 洗脱后重新吸附多巴胺分子, 同时利用聚溴酚蓝膜对多巴胺氧化的电催化作用, 对多巴胺进行定量分析. 多巴胺在0～1.2×10^-6 mol/L浓度范围内与电流变化值有线性关系. 由于印迹膜的催化作用, 检出限达1.62×10^-10 mol/L. 该传感器可用于选择性测定多巴胺, 抗坏血酸和尿酸等共存物不干扰测定. 利用该传感器直接测定了血清中多巴胺含量, 回收率在95.2%～103.0%之间.     

L-色氨酸分子印迹传感器敏感膜的制备与性能

以L-色氨酸(L-Trp)为模板分子, 邻苯二胺(o-PD)为功能单体, 在金电极表面原位合成了分子印迹聚合物敏感膜; 通过循环伏安法(CV)、 差示脉冲伏安法(DPV)和电化学阻抗谱法(EIS)考察了该电极的性能. DPV测试结果表明, 在1×10^-8~2×10^-7 mol/L范围内, 峰电流与L-Trp的浓度呈线性关系, 检出限为0.3×10^-8 mol/L; 选择识别性实验结果表明, L-Trp印迹敏感膜的印迹因子达到3.72, 相对于干扰物的选择因子均大于1, 对与L-Trp结构相似的L-酪氨酸(L-Tyr)的选择因子也达到2.30, 说明该印迹膜对L-Trp具有良好的选择性; 识别过程动力学研究结果表明, 印迹膜对L-Trp的识别是一个两步连续发生的过程, 即快结合过程和慢吸附过程.     

牛血红蛋白印迹聚合物的制备及其对牛血红蛋白的吸附特性

以牛血红蛋白为模板分子,丙烯酰胺为功能单体,N,N’-亚甲基双丙烯酰胺为交联剂,采用醛基硅胶表面修饰技术,合成了牛血红蛋白印迹聚合物（MIP）,并研究了该印迹聚合物对牛血红蛋白的吸附特性。结果表明:当洗脱时间为8 h、洗脱率为83.53%时,印迹聚合物对牛血红蛋白的吸附量为81.39 mg·g^-1。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

Microwave-assisted copper-catalyzed stereoselective ring expansion of three-membered heterocycles with α-diazo-β-dicarbonyl compounds

Microwave-assisted copper-catalyzed ring expansions of three-membered heterocycles with α-diazo-β-dicarbonyl compounds were investigated. Thiiranes generated 3-acyl-5,6-dihydro-1,4-oxathiines in the presence of copper sulfate and trans-3-acyl-5,6-dihydro-1,4-oxathiines as stereospecific products for 1,2-disubstituted cis-thiiranes through an intramolecular S_N2 process. Oxiranes gave rise to 2-acyl-5,6-dihydro-1,4-dioxines under the catalysis of copper hexafluoroacetylacetonate and cis-3-acyl-5,6-dihydro-1,4-dioxines as stereospecific products for 1,2-disubstituted cis-oxiranes via an intimate ion-pair mechanism. The current method provides a direct and simple strategy in efficient preparation of 3-acyl-5,6-dihydro-1,4-oxathiines and 2-acyl-5,6-dihydro-1,4-dioxines, important agents in medicinal and agricultural chemistry, from readily available thiiranes and oxiranes, respectively.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.