首页 | 官方网站   微博 | 高级检索  
相似文献
 共查询到18条相似文献,搜索用时 78 毫秒
1.
针对带扰动不确定分数阶混沌系统的同步问题,基于自适应Terminal滑模控制,设计了一种分数阶非奇异Terminal滑模面,保证误差系统沿着滑模面在有限时间内稳定至平衡点,在系统外部扰动和不确定性的边界事先未知的情况,设计了自适应控制率,在线估计未知边界,使得同步误差轨迹能到达滑模面。最后,以三维分数阶Chen系统和四维分数阶Lorenz超混沌系统为例,利用所设计的自适应Terminal滑模控制器进行同步仿真,验证了所给方法是有效性和可行性。  相似文献   

2.
本文提出一种新型分数阶滑模控制方案来实现两个不同分数阶混沌系统的有限时间同步. 首先, 根据实际情况, 在研究系统同步过程中, 充分考虑死区非线性输入、参数不确定性、模型不确定性以及外界扰动对系统的影 响, 然后, 采用Lyapunov稳定理论证明滑模阶段和趋近阶段均是有限时间收敛的, 最后, 给出一个仿真实例充分验证本文所提出控制策略的有效性和可行性.  相似文献   

3.
讨论了不确定时滞系统的鲁棒控制器设计问题。利用自适应滑模控制策略,直接克服系统不确定性的影响,保证了从任意初始位置出发的系统在有限时间内到滑模面;基于时滞系统鲁棒稳定控制的结论,导出了时滞依赖滑模控制的新结论。仿真实验证明了所提方法的有效性。  相似文献   

4.
针对一类异结构不确定分数阶混沌系统的同步问题,基于Lyapunov稳定性理论和分数阶系统稳定性理论,提出一种神经网络结合干扰观测器的主动反馈控制方法. 设计一种非线性干扰观测器对干扰进行观测,通过滑模控制对未观测出的部分干扰进行补偿,最终实现分数阶混沌系统的同步.与现有方法相比,采用的模型更符合工程应用实际,且不需要已知不确定项上界.数值仿真验证了所提出方法的有效性和正确性.  相似文献   

5.
针对一类带有未知外部扰动的不确定非线性系统,建立自适应模糊滑模控制器。基于Lyapunov稳定性理论,设计系统可调参数的自适应规则,控制器的设计过程中无需知道系统的具体模型及未知非线性函数的先验知识。数值仿真的结果也验证了该方法的有效性。  相似文献   

6.
基于模糊控制理论和滑模控制理论以及自适应控制理论,研究了一类含有外部扰动的不确定分数阶混沌系统的混合投影同步问题.提出了一种自适应模糊滑模控制的分数阶混沌系统投影同步方法.模糊逻辑系统用来逼近未知的非线性函数和外部扰动,并且对逼近误差采用了自适应控制,同时构造了一种具有较强鲁棒性的分数阶积分滑模面.应用分数阶Barbalat引理设计了自适应模糊滑模控制器和参数自适应律.最后数值仿真结果验证了所提控制方法的有效性.  相似文献   

7.
针对滑模控制所存在的抖振问题以及趋近问题,将分数阶微积分理论与滑模控制策略的优点相互结合,提出一种有效的分数阶趋近律.在控制器的设计过程中,将分数阶微积分引入到滑模控制中提出分数阶趋近律,并运用Lyapunov理论进行证明,从而确保系统的稳定性.将提出的控制方法应用于二关节机械臂上,进行仿真验证.结果表明:所提出的分数...  相似文献   

8.
分数阶混沌系统的主动滑模同步   总被引:1,自引:0,他引:1  
结合主动控制和滑模控制原理,提出了一个同步分数阶混沌系统的主动滑模控制方法.该方法首先用分数阶积分对所有维状态分量设计一个滑模面,分数阶混沌系统在该滑模面上稳定.然后采用极点配置的方法获得主动滑模控制器中的增益矩阵.应用Lyapunov稳定性理论、分数阶系统稳定理论对所提的控制器的存在性和稳定性分别进行了分析.对分数阶Lorenz系统进行数值仿真,仿真结果验证了该方法的有效性.  相似文献   

9.
针对一类具有不确定参数的复杂非线性系统,提出了一种自适应积分滑模控制方法。控制器的设计分两步进行:首先,基于被控对象模型构造一个简化子系统,设计出该子系统的一个全局渐近稳定控制律;然后构造一个积分滑模面,设计自适应积分滑模补偿器以处理系统中含有不确定参数的部分,保证了滑模面的可达性和原系统的闭环稳定性。补偿后,系统的完整自适应控制律由简化子系统的控制律加补偿控制器两部分组成。所提设计方法简单,便于工程实现。最后,通过仿真结果验证了设计方案的有效性。  相似文献   

10.
邓立为  宋申民 《自动化学报》2014,40(11):2420-2427
以具有更大秘钥空间的分数阶超混沌系统为驱动系统和响应系统,利用具有实际应用意义的输出反馈滑模控制实现两个系统的同步.通过对同步误差系统方程进行结构分解,在辅助系统的基础上设计具有输出反馈特性的滑模控制律.在分数阶系统稳定性理论基础上利用MATLAB YALMIP工具箱对滑模参数进行整定,并利用分数阶Lyapunov稳定性定理证明了滑模控制律和自适应滑模控制律的稳定性.最后,数值仿真表明了本文方法的有效性和可行性.  相似文献   

11.
This paper investigates the problem of robust control of nonlinear fractional-order dynamical systems in the presence of uncertainties. First, a novel switching surface is proposed and its finite-time stability to the origin is proved. Subsequently, using the sliding mode theory, a robust fractional control law is proposed to ensure the existence of the sliding motion in finite time. We use a fractional Lyapunov stability theory to prove the stability of the system in a given finite time. In order to avoid the chattering, which is inherent in conventional sliding mode controllers, we transfer the sign function of the control input into the fractional derivative of the control signal. The proposed chattering-free sliding mode technique is then applied for stabilisation of a broad class of three-dimensional fractional-order chaotic systems via a single variable driving control input. Simulation results reveal that the proposed fractional sliding mode controller works well for chaos control of fractional-order hyperchaotic Chen, chaotic Lorenz and chaotic Arneodo systems with no-chatter control inputs.  相似文献   

12.
针对在舰船混沌运动控制中由模型不确定性及外部扰动无法确知所引起的控制结果无法保证的问题,采用自适应控制与滑模变结构控制相结合的方法,在设计切换函数时,将符号函数转移到控制输入的一阶导数当中,有效抑制了变结构控制中的抖振问题,并提出了一种单输入自适应滑模变结构控制方法.实验结果表明,与传统滑模变结构控制相比,新方法能够在系统模型具有不确定性及未知外部扰动的情况下实现舰船混沌运动的良好控制,为舰船混沌运动控制提供了一种可靠的工程实现途径.  相似文献   

13.
In this article, an adaptive integral sliding mode control scheme is addressed for switched non-linear systems in the presence of model uncertainties and external disturbances. The control law includes two parts: a slide mode controller for the reduced model of the plant and a compensation controller to deal with the non-linear systems with parameter uncertainties. The adaptive updated laws have been derived from the switched multiple Lyapunov function method, also an admissible switching signal with average dwell-time technique is given. The simplicity of the proposed control scheme facilitates its implementation and the overall control scheme guarantees the global asymptotic stability in the Lyapunov sense such that the sliding surface of the control system is well reached. Simulation results are presented to demonstrate the effectiveness and the feasibility of the proposed approach.  相似文献   

14.
一类非线性不确定系统的非奇异Terminal滑模控制   总被引:1,自引:0,他引:1  
针对一类二阶非线性系统提出新的Terminal滑模控制面以克服传统的Terminal滑模控制的奇异问题,同时确保系统从任何初始状态能在有限时间内收敛至平衡点.进一步考虑系统参数摄动和外界扰动等不确定性因素上界的未知性,用Lyapunov稳定性方法给出了一个带有未知性上界参数估计的自适应非奇异Terminal滑模控制(NTSM)控制.最后通过实例比较三种滑模控制方法,仿真结果验证了非奇异Terminal滑模控制能克服传统的Terminal滑模控制的奇异问题,并说明了自适应非奇异Terminal滑模控制的有效性和可行性.  相似文献   

15.
This article proposes new methodologies for the design of adaptive sliding mode control. The goal is to obtain a robust sliding mode adaptive-gain control law with respect to uncertainties and perturbations without the knowledge of uncertainties/perturbations bound (only the boundness feature is known). The proposed approaches consist in having a dynamical adaptive control gain that establishes a sliding mode in finite time. Gain dynamics also ensures that there is no overestimation of the gain with respect to the real a priori unknown value of uncertainties. The efficacy of both proposed algorithms is confirmed on a tutorial example and while controlling an electropneumatic actuator.  相似文献   

16.
基于高阶滑模观测器的自适应时变滑模再入姿态控制   总被引:2,自引:0,他引:2  
针对再入飞行器鲁棒姿态控制问题, 提出一种基于高阶滑模观测器的自适应时变滑模控制器设计方法. 首先, 设计了一种时变滑模面, 并在此基础上推导了相应的时变滑模控制律, 其中滑模控制中切换增益通过一种自适应算法获得, 消除了控制器设计过程中对系统不确定性上界已知的要求; 然后, 利用高阶滑模观测器对控制器设计过程中用到的姿态角导数信息进行观测, 同时能够获得系统扰动估计值, 从而构造一种基于观测器的控制器形式; 最后, 通过仿真验证了所提出的控制算法在提高再入飞行器姿态控制精度以及系统鲁棒性方面的有效性.  相似文献   

17.
不确定非线性系统的自适应反演终端滑模控制   总被引:8,自引:1,他引:8  
针对一类参数严格反馈型不确定非线性系统, 本文提出一种自适应反演终端滑模控制方法. 反演控制的前n-1步结合自适应律估计系统的未知参数, 第n步采用非奇异终端滑模, 使系统最后一个状态有限时间内收敛.利用微分估计器获得误差系统状态的导数, 并设计了高阶滑模控制律, 去除控制抖振, 使系统对于匹配和非匹配不确定性均具有鲁棒性. 同自适应反演线性滑模方法相比, 所提方法提高了系统的收敛速度和稳态跟踪精度, 并且控制信号更加平滑. 仿真结果验证了该方法的有效性.  相似文献   

18.
A modified adaptive two-phase sliding mode controller for the synchronous motor drive that is highly robust to uncertain-ties and external disturbances is proposed in this paper. The proposed controller uses two-phase sliding mode control (SMC) where the 1st phase mainly controls the system in steady states and disturbed states-it is a smoothing phase. The 2nd phase is used mainly in the case of disturbed states. Also, it is an autotuning phase and uses a simple adaptive algorithm to tune the gain of conventional variable structure control (VSC). The modified controller is useful in position control of a permanent magnet synchronous drive.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司    京ICP备09084417号-23

京公网安备 11010802026262号