Synthesis of star‐shaped poly(ε‐caprolactone)‐b‐poly(L‐lactide) copolymers: From star architectures to crystalline morphologies

Hexa‐armed star‐shaped poly(ε‐caprolactone)‐block‐poly(L ‐lactide) (6sPCL‐b‐PLLA) with dipentaerythritol core were synthesized by a two‐step ring‐opening polymerization. GPC and ¹H NMR data demonstrate that the polymerization courses are under control. The molecular weight of 6sPCLs and 6sPCL‐b‐PLLAs increases with increasing molar ratio of monomer to initiator, and the molecular weight distribution is in the range of 1.03–1.10. The investigation of the melting and crystallization demonstrated that the values of crystallization temperature (T_c), melting temperature (T_m), and the degree of crystallinity (X_c) of PLLA blocks are increased with the chain length increase of PLLA in the 6sPCL‐b‐PLLA copolymers. On the contrary, the crystallization of PCL blocks dominates when the chain length of PLLA is too short. According to the results of polarized optical micrographs, both the spherulitic growth rate (G) and the spherulitic morphology are affected by the macromolecular architecture and the length of the block chains. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Polyethylene‐block‐poly(ε‐caprolactone) diblock copolymers: synthesis and compatibility

A strategy is introduced for the synthesis of polyethylene‐block‐poly(ε‐caprolactone) block copolymers by a combination of coordination polymerization and ring‐opening polymerization. First, end‐hydroxylated polyethylene (PE‐OH) was prepared with a one‐step process through ethylene/3‐buten‐1‐ol copolymerization catalyzed by a vanadium(III) complex bearing a bidentate [N,O] ligand ([PhN?C(CH₃)CHC(Ph)O]VCl₂(THF)₂). The PE‐OH was then used as macroinitiator for ring‐opening polymerization of ε‐caprolactone, leading to the desired nonpolar/polar diblock copolymers. The block structure was confirmed by spectral analysis using ¹H NMR, gel permeation chromatography and differential scanning calorimetry. The unusual topologies of the model copolymers will establish a fundamental understanding for structure–property correlations, e.g. compatibilization, of polymer blends and surface and interface modification of other polymers. © 2014 Society of Chemical Industry     

Synthesis,characterization and biocompatibility of novel biodegradable poly[((R)‐3‐hydroxybutyrate)‐block‐(D,L‐lactide)‐block‐(ε‐caprolactone)] triblock copolymers

BACKGROUND: Biodegradable block copolymers have attracted particular attention in both fundamental and applied research because of their unique chain architecture, biodegradability and biocompatibility. Hence, biodegradable poly[((R )‐3 ‐hydroxybutyrate)‐block‐(D ,L ‐lactide)‐block‐(ε‐caprolactone)] (PHB‐PLA‐PCL) triblock copolymers were synthesized, characterized and evaluated for their biocompatibility. RESULTS: The results from nuclear magnetic resonance spectroscopy, gel permeation chromatography and thermogravimetric analysis showed that the novel triblock copolymers were successfully synthesized. Differential scanning calorimetry and wide‐angle X‐ray diffraction showed that the crystallinity of PHB in the copolymers decreased compared with methyl‐PHB (LMPHB) oligomer precursor. Blood compatibility experiments showed that the blood coagulation time became longer accompanied by a reduced number of platelets adhering to films of the copolymers with decreasing PHB content in the triblocks. Murine osteoblast MC3T3‐E1 cells cultured on the triblock copolymer films spread and proliferated significantly better compared with their growth on homopolymers of PHB, PLA and PCL, respectively. CONCLUSION: For the first time, PHB‐PLA‐PCL triblock copolymers were synthesized using low molecular weight LMPHB oligomer as the macroinitiator through ring‐opening polymerization with D ,L ‐lactide and ε‐caprolactone. The triblock copolymers exhibited flexible properties with good biocompatibility; they could be developed into promising biomedical materials for in vivo applications. Copyright © 2008 Society of Chemical Industry     

Synthesis and characterization of amine‐functionalized amphiphilic block copolymers based on poly(ethylene glycol) and poly(caprolactone)

A series of amine‐functionalized block copolymers, poly(caprolactone)‐block‐poly(ethylene glycol) (PCL‐b‐PEG), were synthesized by ring‐opening bulk polymerization (ROP) of ε‐caprolactone (ε‐CL) initiated through the hydroxyl end of the amino poly(ethylene glycol) (PEG) used as a macroinitiator in the presence of stannous 2‐ethylhexonoate [Sn(Oct)₂]. The polymerization and end functionality of the polymer were studied by different physicochemical techniques (¹H NMR, Fourier transform infrared and X‐ray photoelectron spectroscopy, gel permeation chromatography and thermogravimetric analysis). Thermal, crystalline and mechanical properties of the polymer were thoroughly analyzed using differential scanning calorimetry, wide‐angle X‐ray diffractometry and tensile testing, respectively. The results showed a linear improvement in crystallinity and mechanical properties of the polymer with the content of PEG. Thus the synthesized functional polymers can be used as excellent biomaterials for the delivery of polyanions, as well as macroinitiators for the synthesis of A–B–C‐type block copolymers. Copyright © 2006 Society of Chemical Industry     

Soft nanoconfinement effects on the crystallization behavior of asymmetric poly(ethylene oxide)‐block‐poly(ε‐ caprolactone) diblock copolymers

The time‐ and temperature‐related crystallization process for the structure transitions of asymmetric crystalline‐crystalline diblock copolymers from the melt to crystallites was investigated with synchrotron simultaneous small‐angle/wide‐angle X‐ray scattering. Two asymmetric poly(ethylene oxide)‐poly(ε‐caprolactone) diblock copolymers were chosen. It is found in the course of the copolymer crystallization that the shorter blocks are uncrystallizable in both of the asymmetric diblock copolymers and final lamellar structures are formed in both of them. The final lamellar structure was confirmed from atomic force microscopy observations. The small‐angle X‐ray scattering data collected were analyzed with different methods for the early stage of crystallization. Guinier and Debye‐Bueche plots indicate that there are neither isolated domains nor correlated domains formed before the formation of lamellae in the asymmetric diblock copolymers during the crystallization process. The structure evolution was calculated according to the correlation function, and the soft nanoconfined crystallization behavior is discussed. Copyright © 2012 Society of Chemical Industry     

Crystalline properties of poly(ε‐caprolactone)‐block‐poly(vinyl acetate) block copolymers: influence of synthesis route

Poly(ε‐caprolactone)‐block‐poly(vinyl acetate) (PCL‐b‐PVAc) block copolymers were synthesized using two approaches: a ‘coupling’ approach using click chemistry reaction and a ‘macroinitiator’ route. Different copolymers, varying by their block lengths, were prepared with both methods. PCL is a semi‐crystalline polymer, and consequently PCL blocks of PCL‐b‐PVAc are able to crystallize. The purpose of this work was to analyse the influence of the method of copolymer synthesis on the crystallinity of the PCL blocks. The results indicate a significant decrease of the crystallinity of the PCL blocks in copolymers obtained using the coupling method, compared to PCL homopolymers, in contrast to copolymers obtained through the macroinitiator approach for which the crystallinity of PCL is much less affected. This influence of the synthesis method is explained by the presence, in the copolymers obtained using the click reaction, of a rigid triazol cycle binding the two blocks, limiting their mobility and decreasing the tendency of PCL to crystallize. © 2013 Society of Chemical Industry     

In Situ synthesis of multiblock copolymers of poly(ϵ‐caprolactone) with different poly(ether diols) based polyurethane by reactive extrusion

Polyurethanes with multiblock copolymers of poly(?‐caprolactone) (PCL) and poly(tetramethylene oxide) glycol (PTMG) or poly(ethylene glycol) (PEG) as a soft segment were synthesized in situ via reactive extrusion from ?‐caprolactone (CL) and 4,4′‐diphenylmethane diisocyanate (MDI). The titanium alkoxide mixture generated from an ester‐exchange reaction between titanium propoxide [Ti(OPr)₄], and excessive PTMG or PEG was used as an initiator and catalyst. Compared to the reported fabrication of polycaprolactone‐based polyurethane (PCLU), the in situ reactive extrusion preparation not only explored a new rapid route for the fabrication of PCLU but also offered a simplified, controllable approach for the production of PCLU in a successive mass scale. A series of PTMG–PCLUs and PEG–PCLUs with different PCL block‐average degrees of polymerization (DP_n's) were prepared by only an adjustment of the relative concentration of CL in the reaction system, with a certain constant molar ratio of MDI to titanium alkoxide. ¹H‐NMR, gel permeation chromatography, and differential scanning calorimetry results indicate that all of the CL monomers were converted in the polymerization, and the molecular weight of the copolymers was about 8 × 10⁴ g/mol with a polydispersity index of approximate 2.4. With an increase in the PCL block‐average DP_n in PTMG–PCLU from 25 to 40, the tensile strength increased from 16.5 to 22.7 MPa, and the melting point increased from 46.1 to 49.5°C. It was also verified by PEG–PCLU prepared with organic Ti of lowered content in the initiator mixture that the mechanical properties could be greatly affected and dropped with decreasing content of organic Ti in the initiator mixture. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Alginate grafted with poly(ε‐caprolactone): effect of enzymatic degradation on physicochemical properties

The paper discusses the enzymatic behaviour of a series of copolymers composed of alginate grafted with poly(ε‐caprolactone) (PCL) of various lengths and degrees of substitution. The study is focused on viscosity measurements and pyrene probe fluorescence with or without two enzymes: alginate lyase, which breaks the alginate backbone; and esterase, which breaks PCL pendent groups. Alginate lyase is inactive at pH = 3.8 and degrades quickly all copolymers at pH = 6.3. The degradation is not complete and is slowed down by the presence of PCL. Esterase degrades only copolymers with long pendent PCL groups. It has no effect on copolymers when PCL has a length of 530 g mol^?1. These systems are good candidates for controlled release of drugs using an enzymatic method. Copyright © 2012 Society of Chemical Industry     

Biodegradable block copolymers with poly(ethylene oxide) and poly(glycolic acid‐valine) blocks

Biodegradable ABA triblock copolymers with poly(ethylene oxide) and poly(glycolic acid‐valine) blocks were synthesized via ring‐opening polymerization of cyclo(glycolic acid‐valine) using Ca‐alcoholates of hydroxytelechelic PEO as the initiator. The L‐valine residue racemized during copolymerization of cyclo(glycolic acid‐valine). The crystallization of the block copolymers decreases with decreasing PEO content in the triblock copolymers and with increasing length of the poly(glycolic acid‐valine) block. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 2916–2919, 2002     

Study of a new titanium dual initiator for the synthesis of poly(ε‐caprolactone)‐b‐polystyrene block copolymers by the combination of coordination and nitroxide mediated polymerizations

Poly ε‐caprolactone‐polystyrene block‐copolymers (PCL‐b‐PSt) were synthesized using a modified titanium catalyst as the dual initiator. Alcoholysis of Ti(OPr)₄ by 4‐hydroxy 2,2,6,6 tetramethyl piperidinyl‐1‐oxyl (HO‐TEMPO) gave a bifunctional initiator Ti(OTEMPO)₄. Poly ε‐caprolactone prepolymer end‐capped with the nitroxide group was first prepared by ring opening polymerization of ε‐caprolactone with this initiator at high conversion. The nitroxide‐end‐capped structure and molar mass (M_n) of the polymers were demonstrated by typical UV absorption band. This analytical technique indicates a near‐quantitative nitroxide functionality and a M_n in good agreement with size exclusion chromatography (SEC) ones. This polyester prepolymer was used to further initiate the radical polymerization with styrene and reach the block copolymers (PCL‐b‐PSt). All the prepolymers and block copolymers were characterized by SEC and NMR spectroscopy. Additionally, the preparation of star polymers bearing two kinds of arms (PCL and PSt) was envisaged and a preliminary result was given. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Paper‐sheet biocomposites based on wood pulp grafted with poly(ε‐caprolactone)

Kraft pulp fibers were used as substrates for the grafting of poly(ε‐caprolactone) (PCL) from available hydroxyl groups through ring‐opening polymerization, targeting three different chain lengths (degree of polymerization): 120, 240, and 480. In a paper‐making process, paper‐sheet biocomposites composed of grafted fibers and neat pulp fibers were prepared. The paper sheets possessed both the appearance and the tactility of ordinary paper sheets. Additionally, the sheets were homogenous, suggesting that PCL‐grafted fibers and neat fibers were compatible, as demonstrated by both Fourier transform infrared spectroscopy microscopy and through dye‐labeling of the PCL‐grafted fibers. Finally, it was shown that the paper‐sheet biocomposites could be hot‐pressed into laminate structures without the addition of any matrix polymer; the adhesive joint produced could even be stronger than the papers themselves. This apparent and sufficient adhesion between the layers was thought to be due to chain entanglements and/or co‐crystallization of adjacent grafted PCL chains within the different paper sheets. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42039.     

Synthesis and characterization of novel lipid functionalized poly(ε‐caprolactone)s

A series of novel lipid functionalized poly(ε‐caprolactone)s (PCLs) were synthesized through ROP of ε‐caprolactone in the presence of threo‐9,10‐dihydroxyoctadecanoic acid, synthesized from oleic acid. PCLs with different molecular weights were obtained by controlling the molar ratio of the initiator to the monomer. DSC and XRD analysis indicate that the crystallinity of PCLs decreased when compared to unfunctionalized PCL. The enzymatic degradation study shows that for samples with lower lipid derivatives content, a higher enzymatic degradation rate was observed because the lipase enzymes attack the ester bonds of the polymer; increased lipid content therefore inhibits the action of the lipase enzymes. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

AB‐ and ABC‐type di‐ and triblock copolymers of poly[styrene‐block‐(ε‐caprolactone)] and poly[styrene‐block‐(ε‐caprolactone)‐block‐lactide]: synthesis,characterization and thermal studies

Polystyrene terminated with benzyl alcohol units was employed as a macroinitiator for ring‐opening polymerization of ε‐caprolactone and L ‐lactide to yield AB‐ and ABC‐type block copolymers. Even though there are many reports on the diblock copolymers of poly(styrene‐block‐lactide) and poly(styrene‐block‐lactone), this is the first report on the poly(styrene‐block‐lactone‐block‐lactide) triblock copolymer consisting of two semicrystalline and degradable segments. The triblock copolymers exhibited twin melting behavior in differential scanning calorimetry (DSC) analysis with thermal transitions corresponding to each of the lactone and lactide blocks. The block derived from ε‐caprolactone also showed crystallization transitions upon cooling from the melt. In the DSC analysis, one of the triblock copolymers showed an exothermic transition well above the melting temperature upon cooling. Thermogravimetric analysis of these block copolymers showed a two‐step degradation curve for the diblock copolymer and a three‐step degradation for the triblock copolymer with each of the degradation steps associated with each segment of the block copolymers. The present study shows that it is possible to make pure triblock copolymers with two semicrystalline segments which also consist of degradable blocks. Copyright © 2009 Society of Chemical Industry     

Preparation of unsaturated poly(ε‐caprolactone) with a new titanium alkoxide initiator

Titanium alkoxides are widely used in the ring‐opening polymerization of ε‐caprolactone. In this study, functional poly(ε‐caprolactone) was synthesized with a new titanium initiator by a two‐step procedure: First, the titanium initiator, with an unsaturated group, was prepared by a classical organic reaction between 2‐hydroxyethylmethacrylate or 2‐allyloxyethanol with titanium tetrapropoxide; then, we initiated the polymerization of the ε‐caprolactone monomer in a glass reactor or twin‐screw extruder. By means of NMR spectroscopy, the structures of the initiators and polymers were determined. When 2‐hydroxyethylmethacrylate was used, there was a side reaction (transesterification) during the preparation of the initiator, and so it was impossible to obtain the expected product. With 2‐allyloxyethanol, the designed titanium initiator was synthesized with high purity, and the allyl moiety remained intact after the polymerization of ε‐caprolactone. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

A novel initiating system for ring‐opening polymerization of ε‐caprolactone: Synthesis of triarm star‐shaped poly(ε‐caprolactone)

The rare earth compound, scandium trifluoromethanesulfonate [Sc(OTf)₃], has been used as a water‐tolerant catalyst for the synthesis of star‐shaped poly(ε‐caprolactone)s (SPCLs) with trimethylol propane as trifunctional initiator in solvent at 40°C. Triarm SPCLs have been successfully prepared. The molar mass of SPCLs were determined by end‐group ¹H NMR analyses, which could be well controlled by the molar ratio of the monomer to the initiator, and were independent of the amount of Sc(OTf)₃ used. Differential scanning calorimetry analyses suggested that the maximal melting point, the cold crystallization temperature, and the degree of crystallinities of SPCLs increased with the increasing of the molar mass and were lower than the linear poly(ε‐caprolactone) (LPCL) with similar molar mass. Furthermore, polarized optical microscopy indicated that LPCL showed fast crystallization rate and good spherulitic morphology with apparent Maltese cross pattern, whereas SPCLs exhibit much lower crystallization rate and poor spherulitic morphology. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Nitroxide‐mediated synthesis of styrenic‐based segmented and tapered block copolymers using poly(lactide)‐functionalized TEMPO macromediators

Poly(styrene)‐poly(lactide) (PS‐PLA), poly (tert‐butyl styrene)‐poly(lactide) (PtBuS‐PLA) diblocks, and poly(tert‐butyl styrene)‐poly(styrene)‐poly(lactide) (PtBuS‐PS‐PLA) segmented and tapered triblocks of controlled segment lengths were synthesized using nitroxide‐mediated controlled radical polymerization. Well‐defined PLA‐functionalized macromediators derived from hydroxyl terminated TEMPO (PLA_T) of various molecular weights mediated polymerizations of the styrenic monomers in bulk and in dimethylformamide (DMF) solution at 120–130°C. PS‐PLA and PtBuS‐PLA diblocks were characterized by narrow molecular weight distributions (polydispersity index (M_w/M_n) < 1.3) when using the PLA_T mediator with the lowest number average molecular weight M_n= 6.1 kg/mol while broader molecular weight distributions were exhibited (M_w/M_n = 1.47‐1.65) when using higher molecular weight mediators (M_n = 7.4 kg/mol and 11.3 kg/mol). Segmented PtBuS‐PS‐PLA triblocks were initiated cleanly from PtBuS‐PLA diblocks although polymerizations were very rapid with PS segments ～ 5–10 kg/mol added within 3–10 min of polymerization at 130°C in 50 wt % DMF solution. Tapering from the PtBuS to the PS segment in semibatch mode at a lower temperature of 120°C and in 50 wt % DMF solution was effective in incorporating a short random segment of PtBuS‐ran‐PS while maintaining a relatively narrow monomodal molecular weight distribution (M_w/M_n ≈ 1.5). © 2008 Wiley Periodicals, Inc. J Appl Polym Sci 2008     

Solubilization of graphene flakes through covalent modification with well‐defined azido‐terminated poly(ε‐caprolactone)

A well‐defined poly(ε‐caprolactone) (PCL) with terminal azido group was prepared. Grafting‐on reaction between the azido‐terminated PCL (N₃? PCL) and ultrasonication‐assisted exfoliated graphene flakes (GF) was carried out to obtain PCL‐grafted‐GF (PCL‐g‐GF) which showed good dispersibility in a wide variety of organic solvents. Gel permeation chromatography, ¹H NMR, IR, Raman, UV‐vis, and TEM measurements indicated that PCL macromolecules were covalently introduced on the surface of GF without disrupting the structure of GF. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41569.     

Synthesis and characterization of well‐defined random and block copolymers of ε‐caprolactone with l‐lactide as an additive for toughening polylactide: Influence of the molecular architecture

Well‐defined multiarmed star random and block copolymers of ε‐caprolactone with l ‐lactide with controlled molecular weights, low polydispersities, and precise numbers of arms were synthesized by the ring‐opening polymerization of respective cyclic ester monomers. The polymers were characterized by ¹H‐NMR and ¹³C‐NMR to determine their chemical composition, molecular structure, degree of randomness, and proof of block copolymer formation. Gel permeation chromatography was used to establish the degree of branching. Star‐branched random copolymers exhibited lower glass‐transition temperatures (T_g's) compared to a linear random copolymer. When the star random copolymers were melt‐blended with poly(l ‐lactic acid) (PLA), we observed that the elongation of the blend increased with the number of arms of the copolymer. Six‐armed block copolymers, which exhibited higher T_g's, caused the maximum improvement in elongation. In all cases, improvements in the elongation were achieved with no loss of stiffness in the PLA blends. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43267.     

Synthesis and characterization of temperature‐sensitive block copolymers from poly(N‐isopropylacrylamide) and 4‐methyl‐ε‐caprolactone or 4‐phenyl‐ε‐caprolactone

This study synthesizes thermally sensitive block copolymers poly(N‐isopropylacrylamide)‐b‐poly(4‐methyl‐ε‐caprolactone) (PNIPA‐b‐PMCL) and poly(N‐isopropylacrylamide)‐b‐poly(4‐phenyl‐ε‐caprolactone) (PNIPA‐b‐PBCL) by ring‐opening polymerization of 4‐methyl‐ε‐caprolactone (MCL) or 4‐phenyl‐ε‐caprolactone (BCL) initiated from hydroxy‐terminated poly(N‐isopropylacrylamide) (PNIPA) as the macroinitiator in the presence of SnOct₂ as the catalyst. This research prepares a PNIPA bearing a single terminal hydroxyl group by telomerization using 2‐hydroxyethanethiol (ME) as a chain‐transfer agent. These copolymers are characterized by differential scanning calorimetry (DSC), ¹H‐NMR, FTIR, and gel permeation chromatography (GPC). The thermal properties (T_g) of diblock copolymers depend on polymer compositions. Incorporating larger amount of MCL or BCL into the macromolecular backbone decreases T_g. Their solutions show transparent below a lower critical solution temperature (LCST) and opaque above the LCST. LCST values for the PNIPA‐b‐PMCL aqueous solution were observed to shift to lower temperature than that for PNIPA homopolymers. This work investigates their micellar characteristics in the aqueous phase by fluorescence spectroscopy, transmission electron microscopy (TEM), and dynamic light scattering (DLS). The block copolymers formed micelles in the aqueous phase with critical micelle concentrations (CMCs) in the range of 0.29–2.74 mg L^?1, depending on polymer compositions, which dramatically affect micelle shape. Drug entrapment efficiency and drug loading content of micelles depend on block polymer compositions. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Ring‐opening polymerization of ε‐caprolactone with a divalent samarium bis(phosphido) complex

The ring‐opening polymerization of ε‐caprolactone initiated with a divalent samarium bis(phosphido) complex [Sm(PPh₂)₂] is reported. The polymerization proceeded under mild reaction conditions and resulted in polyesters with number‐average molecular weights of 8.2 × 10³ to 12.5 × 10³. The yield and molecular weight of poly(ε‐caprolactone)s were dependent on the experimental parameters, such as the monomer/initiator molar ratio, the monomer concentration, the reaction temperature, and the polymerization time. The obtained polymers were characterized with Fourier transform infrared, NMR, gel permeation chromatography, and differential scanning calorimetry. On the basis of an end‐group analysis of low‐molecular‐weight polymers by NMR spectroscopy, a coordination–insertion mechanism is proposed for the polymerization. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 1558–1564, 2005