淀粉接枝共聚物瓦楞纸表面施胶增强剂的制备及其应用

利用无皂乳液聚合技术通过阳离子淀粉和苯乙烯(St)、丙烯酸丁酯(BA)等乙烯基单体进行接枝共聚反应,制备了一种淀粉接枝聚合物乳液,并对其表面施胶性能进行了研究。结果表明:当m(淀粉接枝乳液)∶m(氧化淀粉)=3∶100、w(硫酸铝)=0.4%和施胶液pH=4时,其应用效果好且性价比高;淀粉接枝乳液的施胶性能优于氧化淀粉和接枝单体共聚物。     

Synthesis of cassava starch‐g‐poly(methyl methacrylate) copolymers with benzoyl peroxide as an initiator

Graft copolymers of cassava starch and methyl methacrylate (MMA) were synthesized by free‐radical polymerization with benzoyl peroxide (BPO) as an initiator in an aqueous medium at 80°C. The formation of graft copolymers was confirmed by analysis of the obtained products with Fourier transform infrared spectroscopy and scanning electron microscopy. The effects of the amount of cassava starch, the amount of MMA monomer, the amount of BPO, and the reaction time on the grafting characteristics were studied. The optimum condition for grafting were obtained when 5 g of cassava starch, 5 g of MMA, 0.1 g of BPO, and a reaction time of 3 h were used. These condition provided a graft copolymer with 25.00% add‐on, 81.40% monomer conversion, 54.30% homopoly(methyl methacrylate) formed, 45.70% grafting efficiency, 37.20% grafting ratio, and 95.54% yield. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 4083–4089, 2006     

Synthesis and properties of graft oxidation starch sizing agent

In this article, a graft, oxidation starch sizing agent was synthesized and its structure and surface morphology were analyzed by infrared (IR) spectroscopy and scanning electron microscopy (SEM). The results show that the synthesized graft oxidation starch has good gelatinizing ability, good film properties, good desizing ability, and lower hygroscopic properties. The sized yarns (T/C65/35, 13.5tex), sized with graft oxidation starch and emulsive copolymer size EM, exhibit good tensile strength and elongation at break, good abrasion resistance, and lower counts of fluff when poly (vinyl alcohol) (PVA) is substituted by ≤ 80% with graft oxidation starch. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 1563–1566, 2003     

Peroxydiphosphate–metal ion–cellulose thiocarbonate redox system‐induced graft copolymerization of vinyl monomers onto cotton fabric

The grafting of methacrylic acid (MAA) and other vinyl monomers onto cotton cellulose in fabric form was investigated in an aqueous medium with a potassium peroxydiphosphate–metal ion–cellulose thiocarbonate redox initiation system. The graft copolymerization reaction was influenced by peroxydiphosphate (PP) concentration, the pH of the reaction medium, monomer concentration, the duration and temperature of polymerization, the nature of vinyl monomers, and the nature and concentration of metallic ions (activators). On the basis of a detailed investigation of these factors, the optimal conditions for the grafting of MAA onto cotton fabric with the said redox system were as follows: [Fe²⁺] = 0.1 mmol/L, [PP] = 2 mmol/L, [MAA] = 4%, pH‐2, grafting time = 2 h, grafting temperature = 70°C, and material/liquor ratio = 1 : 50. Under these optimal conditions, the graft yields of different monomers were in the following sequence: MAA ? acrylonitrile > acrylic acid > methyl acrylate > methyl methacrylate. The unmodified cellulosic fabric (the control) had no ability to be grafted with MAA with the PP–Fe²⁺ redox system. The percentage of grafting onto the thiocarbonated cellulosic fabric was more greatly enhanced in the presence of iron salts than in their absence. This held true when the lowest concentrations of these salts were used separately. A suitable mechanism for the grafting processes is suggested, in accordance with the experimental results. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 87: 1879–1889, 2003     

纸厂回收淀粉用于纸张施胶剂的制备与应用

以纸厂回收并经过处理的废淀粉作为聚合物的主链,通过接枝苯乙烯(St)、丙烯酸丁酯(BA)及甲基丙烯酸甲酯(MMA)等单体,合成出一种稳定的苯丙乳液施胶剂。结果表明:当w(引发剂)=2.5%~4%、反应温度为70~80℃和m(总单体)∶m(废淀粉)=1∶1.5时,废淀粉接枝共聚物乳液施胶剂的综合性能最好;该施胶剂能有效提高原纸张的各项性能,在同等条件下其性能略低于市售施胶剂;废淀粉回收价格较低,将其用于纸张施胶剂的制备,可达到降低污染、节约成本等目的。     

Graft copolymerization of methyl methacrylate onto starch using a Ce(IV)–glucose initiator system

Graft copolymerization of methyl methacrylate onto starch was carried out in aqueous medium using Ce(IV)–glucose initiator in the temperature range 40–60°C. Effects of concentration of Ce(IV), glucose, H₂SO₄, monomer, and starch on grafting were investigated. Percentages of grafting were evaluated and compared. The overall energy of activation was calculated from the effects of time and temperature of polymerization. The reaction mechanism was also discussed. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 981–990, 2004     

Synthesis and characterization of biodegradable polyethylene by graft copolymerization of starch using glucose–Ce(IV) redox system

Graft copolymerization of low‐density polyethylene (LDPE) onto starch was carried out with glucose–cerium(IV) redox initiator in an aqueous sulfuric acid medium under nitrogen atmosphere. The graft yield was influenced by various parameters like reaction time, temperature, and concentrations of acid, glucose, polyethylene (PE), starch, and initiator. A maximum graft yield of 85.66% was obtained at a temperature of 50°C and at higher concentration of starch. Effect of grafting on crystallinity, morphology, and thermal properties of modified PE has been evaluated using X‐ray diffraction, scanning electron microscopy (SEM), differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA/DTA). Biodegradability of starch‐grafted PE has been tested applying soil‐burial test. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 3229–3239, 2006     

Synthesis and characterization of butyl acrylate graft sodium salt of partially carboxymethylated starch

Graft copolymers were synthesized by graft copolymerization of butyl acrylate (BA) onto sodium salt of partially carboxymethylated starch (Na‐PCMS). Ceric ammonium nitrate (CAN), a redox initiator, was used for initiation of graft copolymerization reaction. All the experiments were run with Na‐PCMS having degree of substitution, DS = 0.35. The grafting reaction was characterized by parameters such as % total conversion (%Ct), % grafting (%G), % grafting efficiency (%GE), and % add‐on. Graft copolymers were characterized by infrared spectral analysis and scanning electron microscopy. Variables affecting graft copolymerization reaction such as nitric acid concentration, reaction time, reaction temperature, and ceric ion concentration were investigated. The results revealed that 0.3M CAN as initiator, 0.3M HNO₃, with reaction time 4–4.5 h at 25–30°C were found as suitable parameters for maximum yield of graft copolymerization reaction. © 2006 Wiley Periodicals, Inc. JAppl Polym Sci 102: 3334–3340, 2006     

Synthesis and characterization of novel graft copolymers by radiation‐induced grafting

The radiation‐induced graft copolymerization of N‐vinyl‐2‐pyrrolidone (NVP), 4‐vinyl pyridine (4VP), and 2‐vinyl pyridine (2VP) monomers onto poly (ethylene‐alt‐tetrafluoroethylene) (ETFE) was investigated. The influence of synthesis conditions particularly the solvent was studied. Various solvents, such as n‐propanol, isoproponol, benzyl alcohol, methanol, ethanol, cyclohexanone, tetrahydrofuran (THF), nitromethane, 1,4‐dioxane, and n‐heptane were examined for this purpose. Graft copolymers were characterized by Fourier transform infrared (FTIR) spectroscopy, dynamic mechanical analysis (DMA), and scanning electron microscopy‐energy dispersive spectroscopy (SEM‐EDAX). It was found that the nature of the solvent had profound influence over the grafting reaction. Cyclohexanone, n‐propanol, and isoproponol for 4VP/ETFE grafting, THF and 1,4‐dioxane for NVP/ETFE grafting, and benzyl alcohol and methanol for 2VP/ETFE grafting were found to be the suitable solvents yielding highest graft levels. Isoproponol and n‐propanol are promising in terms of both graft level and mechanical properties for 4VP/ETFE. Grafting of NVP, 4VP, and 2VP onto ETFE were verified through FTIR spectroscopy. Storage modulus and glass transition temperature of the copolymers were found to increase as graft level increased. Surface profile of representative films was also investigated by viewing the distribution of elemental nitrogen using SEM‐EDAX. Results indicated that copolymers of 4VP, NVP, and 2VP are considerably different from each other. 4VP‐based copolymers exhibited relatively more homogenous grafting over the surface compared with NVP‐ and 2VP‐based copolymers. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

淀粉丙烯酰胺表面控制反应机理及接枝产物结构表征

以木薯淀粉和丙烯酰胺为主要原料,采用反相乳液聚合方法合成淀粉丙烯酰胺接枝共聚物,并通过红外光谱、电镜扫描、X射线衍射、热分析等手段对接枝共聚产物进行结构分析和聚合机理探讨。实验结果显示,淀粉与丙烯酰胺的反应主要发生在淀粉团粒表面,符合表面控制反应机理;接枝共聚物中含有淀粉和丙烯酰胺成分;共聚反应改变了原淀粉的聚集形态,接枝产物基本上为无定形的聚集态结构;但对淀粉的热稳定性影响不显著。     

壳聚糖黏均分子量对其作表面施胶剂应用效果的影响

利用过氧化氢对壳聚糖进行氧化降解,获得了一系列不同黏均分子量的壳聚糖。用不同黏均分子量的壳聚糖对纸张表面进行施胶,研究施胶对纸张性能的影响。结果表明:壳聚糖黏均分子量的降低不利于其表面施胶效果,并通过扫描电镜图进行了证实;在相同条件下,相比于单独使用氧化淀粉,少量壳聚糖与氧化淀粉共混作用于纸张表面,对纸张表面强度增强效果更佳。     

Synthesis and absorbency of a superabsorbent from sodium starch sulfate‐g‐polyacrylonitrile

A sodium starch sulfate–based superabsorbent was synthesized to improve water and saline absorbencies. A sodium starch sulfate with high degree of substitution was synthesized by the reaction of starch gelatinized with dimethyl acetamide (DMAc)/lithium chloride (LiCl) and a dimethyl formamide–sulfur trioxide (DMF–SO₃) complex. The sodium starch sulfate was then graft‐polymerized with acrylonitrile and the nitrile groups of the sodium starch sulfate‐g‐polyacrylonitrile were converted to a mixture of hydrophilic carboxamide and carboxylate groups by alkaline hydrolysis. The hydrolyzed sodium starch sulfate‐g‐polyacrylonitrile copolymer exhibited improved water and saline absorbencies compared with that of existing starch‐based superabsorbents, resulting from the presence of sulfate groups. The maximum water and saline absorbencies of the sodium starch sulfate–based superabsorbent were 1510 and 126.4 g/g, respectively. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 79: 1423–1430, 2001     

Synthesis of graft copolymers from natural rubber using cumene hydroperoxide redox initiator

The graft copolymerization of 50/50 (w/w) styrene/methyl methacrylate mixtures onto natural rubber seed latex were carried out by using cumene hydroperoxide/sodium formaldehyde sulfoxylate dihydrate/EDTA‐chelated Fe²⁺ as a redox initiator. The effects of the process factors such as the amount of initiator, emulsifier, and chain‐transfer agent; monomer‐to‐rubber ratio; and temperature on the grafting efficiency (GE) and grafting level (GL) are reported. The mechanism of graft copolymerization was investigated. The synthesized graft copolymers were purified and then characterized by proton nuclear magnetic resonance (¹H‐NMR) analysis. Transmission electron microscopy (TEM) was used to study the morphology of the graft copolymers. It appears that the formation of graft copolymers occurs on the surface of the latex particles through a chain‐transfer process. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 2993–3001, 2002; DOI 10.1002/app.2328     

Grafting of acrylic acid onto flax fibers using Mn(IV)‐citric acid redox system

When the flax fibers (machine tow) were treated with KMnO₄ solution, MnO₂ was deposited over‐all the fiber surface. The amount of MnO₂ deposited relied on the KMnO₄ concentration. Subjecting the flax‐containing MnO₂ to a solution consisting of monomer (acrylic acid, AA) and citric acid, CA (or any acid used in this work) resulted in formation of poly(AA)‐flax graft copolymer. Dependence of the polymer criteria, namely, the total percentage conversion (%TC) and the carboxyl content of the grafted flax fibers on various grafting parameters, viz., concentrations of the redox pair as well as AA, material‐to‐liquor ratio (M/R), duration and temperature of polymerization, kind of the acid and kind of the flax fibers pretreatment was studied systematically. The results indicated that the polymerizability of AA molecules, expressed as %TC (i.e., counting both grafting and homopolymerization) and thence the carboxyl content (i.e., evaluating the extent of AA grafting along the flax backbone) was optimized with the following conditions: [AA], 100% (based on weight of flax fibers, owf); [CA], 0.4 meq/1 g flax; [MnO₂], 0.4 meq/1 g flax; polymerization temperature, 40°C; polymerization time, 30 min; and the M/R, 1 : 50. A tentative mechanism for grafting of flax fibers with AA using MnO₂‐acid redox system was elucidated. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 3028–3036, 2006     

Microwave‐assisted green approach for graft copolymerization of l‐lactic acid onto starch

Poly l ‐lactic acid grafted starch (St‐g‐PLA) copolymers were directly synthesized under microwave irradiation by using sodium hydroxide (NaOH) and stannous 2‐ethyl hexanoate acting as a catalyst, without the use of toxic solvents. The product were characterized by Fourier transform infrared spectroscopy (FTIR), nuclear magnetic resonance (¹³C CP/MAS NMR), X‐ray diffraction (XRD), scanning electron microscopy (SEM) and thermogravimetric analysis (TGA‐DTG). SEM analysis indicated that microwave heating had a considerable effect on the interfacial adhesion between PLA and starch. Thermogravimetric analysis (TGA‐DTG) revealed that copolymers exhibited better thermal stability. Maximum PLA grafting was achieved with the following reaction conditions: 450W microwave power, monomer ratio of 1:5 and 0.4M of NaOH. This study demonstrates that it is possible to obtain St‐g‐PLA copolymers with better processing characteristics and smaller sizes via microwave‐assisted synthesis. The applied procedure is an interesting “green” synthesis method for the production of biodegradable materials used in a diverse range of applications. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 42937.     

Graft copolymerization of methyl methacrylate onto rubber‐wood fiber using H2O2 and Fe2+ as an initiator system

Methyl methacrylate (MMA) was successfully grafted onto rubber‐wood fiber in a free‐radical solution polymerization initiated by ferrous ion and hydrogen peroxide. The effects of the reaction parameters (reaction temperature, reaction period, influence of hydrogen peroxide, ferrous ammonium sulfate, and monomer concentrations) were investigated. The grafting percentage showed dependency on H₂O₂, Fe²⁺, and monomer concentrations, as well as reaction temperature and reaction period. The optimum reaction temperature was determined to be about 60°C and the reaction period was 60 min. The optimum concentration of H₂O₂ was 0.03M and optimum amounts of Fe²⁺ and MMA were 0.26 mmol and 2.36 × 10^?2 mol, respectively. Poly(methyl methacrylate) (PMMA) homopolymer was removed from the graft copolymer by Soxhlet extractor using acetone. The presence of PMMA on the fiber was shown by FT‐IR spectroscopy and gravimetric analysis. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 2499–2503, 2003     

Synthesis and characterization of graft copolymers of syndiotactic polystyrene with polybutadiene and 4‐methylstyrene

The basic method for synthesizing syndiotactic polystyrene‐g‐polybutadiene graft copolymers was investigated. First, the syndiotactic polystyrene copolymer, poly(styrene‐co‐4‐methylstyrene), was prepared by the copolymerization of styrene and 4‐methylstyrene monomer with a trichloro(pentamethyl cyclopentadienyl) titanium(IV)/modified methylaluminoxane system as a metallocene catalyst at 50°C. Then, the polymerization proceeded in an argon atmosphere at the ambient pressure, and after purification by extraction, the copolymer structure was confirmed with ¹H‐NMR. Lastly, the copolymer was grafted with polybutadiene (a ready‐made commercialized unsaturated elastomer) by anionic grafting reactions with a metallation reagent. In this step, poly(styrene‐co‐4‐methylstyrene) was deprotonated at the methyl group of 4‐methylstyrene by butyl lithium and further reacted with polybutadiene to graft polybutadiene onto the deprotonated methyl of the poly(styrene‐co‐4‐methylstyrene) backbone. After purification of the graft copolymer by Soxhlet extraction, the grafting reaction copolymer structure was confirmed with ¹H‐NMR. These graft copolymers showed high melting temperatures (240–250°C) and were different from normal anionic styrene–butadiene copolymers because of the presence of crystalline syndiotactic polystyrene segments. Usually, highly syndiotactic polystyrene has a glass‐transition temperature of 100°C and behaves like a glassy polymer (possessing brittle mechanical properties) at room temperature. Thus, the graft copolymer can be used as a compatibilizer in syndiotactic polystyrene blends to modify the mechanical properties to compensate for the glassy properties of pure syndiotactic polystyrene at room temperature. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Grafting of acrylic monomers onto cotton fabric using an activated cellulose thiocarbonate–azobisisobutyronitrile redox system

The feasibility of a cellulose thiocarbonate–azobisisobutyronitrile (AIBN) initiation system to induce graft copolymerization of methyl methacrylate (MMA) and other acrylic monomers onto cotton fabric was investigated. Other acrylic monomers were acrylic acid, acrylonitrile, and methyl acrylate. The initiation system under investigation was highly activated in the presence of a metal‐ion reductant or a metal‐ion oxidant in the polymerization medium. A number of variables in the grafting reaction were studied, including AIBN concentration, pH of the polymerization medium, nature of substrate, monomer concentration, duration and temperature of polymerization, and composition of the solvent/water polymerization medium. The solvents used were methanol, isopropanol, 1,4‐dioxane, cyclohexane, benzene, dimethyl formamide, and dimethyl sulfoxide. There were optimal concentrations of AIBN (5 mmol/L), MMA (8%), Fe²⁺ (0.1 mmol/L), Mn²⁺ (8 mmol/L), and Fe³⁺ (2 mmol/L). A polymerization medium of pH 2 and temperature of 70°C constituted the optimal conditions for grafting. The methanol/water mixture constituted the most favorable reaction medium for grafting MMA onto cotton fabric by using the Fe²⁺–cellulose thiocarbonate–AIBN redox system. MMA was superior to other monomers for grafting. The unmodified cotton cellulose showed very little tendency to be grafted with MMA compared with the chemically modified cellulosic substrate. A tentative mechanism for the grafting reaction was proposed. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 1261–1274, 2004     

Synthesis of polyethylene‐graft‐poly(styrene‐co‐maleic anhydride) and its compatibilizing effects on polyethylene/starch blends

Low density polyethylene (LDPE) was reacted with benzoyl peroxide (BPO) and 2,2,6,6‐tetramethyl‐l‐piperidinyloxy (TEMPO) to prepare a latent macroinitiator, PE–TEMPO. Little polymer was synthesized when maleic anhydride (MAH) was bulk polymerized in the presence of the PE–TEMPO. However, addition of styrene accelerated the polymerization rate and PE‐grafted‐poly(styrene‐co‐maleic anhyride) [PE‐g‐P(ST‐co‐MAH)] was produced to a high yield. Chemical reaction between MAH units and hydroxyl groups of starch was nearly undetectable in the PE/PE‐g‐P(ST‐co‐MAH)/starch blend system, and the tensile properties of the blend were not enhanced significantly. However, addition of tetrabutyl titanate (TNBT) during the blending procedure improved the tensile properties significantly through an increased interfacial adhesion between the components in the blend system. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 2434–2438, 2003