Human serum albumin adsorption on poly[(glycidyl methacrylate)‐co‐(methyl methacrylate)] beads modified with a spacer‐arm‐attached L‐histidine ligand

Poly(GMA/MMA) beads were synthesized from glycidyl methacrylate (GMA) and methyl methacrylate (MMA) in the presence of a cross‐linker (i.e. ethyleneglycol dimethacrylate) (EGDMA) via suspension polymerization. The epoxy groups of the poly(GMA/MMA) beads were converted into amino groups with either ammonia or 1,6‐diaminohexane (i.e. spacer‐arm). An L ‐histidine ligand was then covalently immobilized on the aminated (poly(GMA/MMA)‐AH) and/or the spacer‐arm attached (poly(GMA/MMA)‐SAH) beads using glutaric dialdehyde as a coupling agent. Both affinity adsorbents were used in human serum albumin (HSA) adsorption/desorption studies under defined pH, ionic strength or temperature conditions in a batch reactor. The spacer‐arm attached affinity adsorbent resulted in an increase in the adsorption capacity to HSA when compared to the aminated counterpart (i.e. poly(GMA/MMA)‐AH). The maximum adsorption capacities of the affinity adsorbents were found to be significantly high, i.e. 43.7 and 80.2 mg g^?1 (of the beads), while the affinity constants, evaluated by the Langmuir model, were 3.96 × 10^?7 and 9.53 × 10^?7 mol L^?1 for poly(GMA/MMA)‐AH and poly(GMA/MMA)‐SAH, respectively. The adsorption capacities of the affinity adsorbents were decreased for HSA by increasing the ionic strength, adjusted with NaCl. The adsorption kinetics of HSA were analysed by using pseudo‐first and pseudo‐second‐order equations. The second‐order equation fitted well with the experimental data. Copyright © 2005 Society of Chemical Industry     

N‐acetyl‐D‐galactosamine‐specific lectin isolation from soyflour with poly(HPMA‐GMA) beads

Soybean lectin was purified from seeds of Glycine max L.Merrill SA88. Poly(hydroxypropyl methacrylate‐glycidyl methacrylate) [poly(HPMA‐GMA)] beads were used as an affinity matrix and N‐acetyl‐D ‐galactosamine (GalNAc) was used as an affinity ligand. Soybean lectin adsorption with GalNAc attached poly(HPMA‐GMA) beads from soybean lectin solution (in phosphate buffered saline) was 5.0 mg/g. Maximum adsorption capacity for soybean lectin from the soy flour extract was 26.0 mg/g. Elution of soybean lectin from adsorbent was accomplished by 0.5M galactose solution. Purity of soybean lectin was determined by SDS‐PAGE. It was observed that soybean lectin could be repeatedly adsorbed and desorbed with GalNAc‐attached poly(HPMA‐GMA) beads. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Concanavalin A immobilized magnetic poly(glycidyl methacrylate) beads for antibody purification

Concanavalin A (Con A) immobilized magnetic poly(glycidyl methacrylate) (mPGMA) beads in monosize and spherical for (1.62 μm in diameter) were used for the purification of human immunoglobulin G (IgG) from human plasma. Con A was immobilized by covalent binding onto the mPGMA beads. The maximum IgG adsorption on the mPGMA-Con A beads was observed at pH 6.0. The nonspecific IgG adsorption onto the plain mPGMA beads was very low (0.22 mg/g). Scatchard analysis of the adsorption isotherm for IgG on mPGMA-Con A beads showed an affinity constant (K_a) of 1.39 × 10⁵ M⁻¹ and a theoretical maximum adsorption capacity of 109.1 mg/g. An apparent IgG adsorption capacity of 66.2 mg/g was observed under the experimental conditions. IgG adsorption capacity from human plasma was observed as 48.0 mg/g. The adsorption of human serum albumin from plasma was 2.0 mg/g. The total protein adsorption was determined to be 50.0 mg/g. IgG molecules could be repeatedly adsorbed and eluted with the mPGMA-Con A beads without noticeable loss in the IgG adsorption capacity. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Cibacron Blue F3GA‐attached magnetic poly(2‐hydroxyethyl methacrylate) beads for human serum albumin adsorption

An affinity dye ligand, Cibacron Blue F3GA, was covalently attached onto magnetic poly(2‐hydroxyethyl methacrylate) (mPHEMA) beads for human serum albumin (HSA) adsorption from both aqueous solutions and human plasma. The mPHEMA beads, in the size range of 80 to 120 µm, were prepared by a modified suspension technique. Cibacron Blue F3GA molecules were incorporated on to the mPHEMA beads. The maximum amount of Cibacron Blue F3GA attachment was obtained as 68.3 µmol g^?1. HSA adsorption onto unmodified and Cibacron Blue F3GA‐attached mPHEMA beads was investigated batchwise. The non‐specific adsorption of HSA was very low (1.8 mg g^?1). Cibacron Blue F3GA attachment onto the beads significantly increased the HSA adsorption (94.5 mg g^?1). The maximum HSA adsorption was observed at pH 5.0. Higher HSA adsorption was observed from human plasma (138.3 mg HSA g^?1). Desorption of HSA from Cibacron Blue F3GA‐attached mPHEMA beads was obtained by using 0.1 M Tris/HCl buffer containing 0.5 M NaSCN. High desorption ratios (up to 98% of the adsorbed HSA) were observed. It was possible to re‐use Cibacron Blue F3GA‐attached mPHEMA beads without any significant decreases in their adsorption capacities. Copyright © 2004 Society of Chemical Industry     

Invertase immobilized on spacer‐arm attached poly(hydroxyethyl methacrylate) membrane: Preparation and properties

Microporous poly(2‐hydroxyethyl methacrylate) (pHEMA) membrane was prepared by UV‐initiated photopolymerization. The spacer arm (i.e., hexamethylene diamine) was attached covalently and then invertase was immobilized by the condensation reaction of the amino groups of the spacer arm with carboxyl groups of the enzyme in the presence of carbodiimides. The values of the Michael's constant K_m of invertase were significantly larger (ca. 2.5 times) upon immobilization, indicating decreased affinity by the enzyme for its substrate, whereas V_max was smaller for the immobilized invertase. Immobilization improved the pH stability of the enzyme as well as its temperature stability. Thermal stability was found to increase with immobilization and at 70°C the half times for the activity decay were 12 min for the free enzyme and 41 min for the immobilized enzyme. The immobilized enzyme activity was found to be quite stable in repeated experiments. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 75: 1685–1692, 2000     

Concanavalin A attached poly(p‐chloromethylstyrene) beads for glycoenzyme separation

Crosslinked poly(p‐chloromethylstyrene) (PCMS) beads were produced by suspension polymerization. The beads had a nonporous but reasonably rough surface structure. Because of this property, a relatively high external surface area (i.e., 14.1 m²/g) was obtained with the proposed carrier. A biospecific ligand commonly used in the affinity chromatography of various glycoenzymes, concanavalin A (Con A), was covalently attached onto the bead surface by a direct chemical reaction. PCMS/Con A beads were then used for the separation of a model glycoenzyme, invertase, from its crude solution. The appropriate invertase adsorption and desorption conditions of the affinity system were investigated. The desorption of invertase from the carrier was achieved by the use of methyl‐α‐D ‐mannopyranoside (MMP) as the counterligand. The effects of the MMP and salt concentrations and the temperature on the desorption behavior of invertase were investigated. The MMP concentration and temperature were found to be the dominant parameters controlling the desorption. Iterative experiments involving five reversible adsorption–desorption cycles were performed with the same particles to monitor the changes that occurred in the invertase adsorption–desorption capacities of Con A immobilized beads. The reversible adsorption–desorption stability was significantly improved by the crosslinking of Con A immobilized on the beads. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 2116–2124, 2004     

Adsorption of trypsin onto magnetic ion‐exchange beads of poly(glycidylmethacrylate‐co‐ethyleneglycoldimethacrylate)

Magnetic beads were prepared from glycidyl methacrylate (GMA), and ethyleneglycol dimethylmethacrylate (EGDMA) in the presence of Fe₃O₄ nano‐powder via suspension polymerization. The magnetic beads were characterized by surface area measurement, electron spin resonance (ESR), and scanning electron microscopy (SEM). ESR data revealed that the beads were highly super‐paramagnetic. The effects of contact time, pH, ionic strength, and temperature on the adsorption process have been studied. Adsorption equilibrium was established in about 120 min. The maximum adsorption of trypsin on the magnetic beads was obtained as 84.96 mg g^?1 at around pH 7.0. At increased ionic strength, the contribution of the electrostatic component to the overall binding decreased, and so the adsorption capacity. The experimental equilibrium data obtained trypsin adsorption onto magnetic beads fitted well to the Langmuir isotherm model. The result of kinetic analyzed for trypsin adsorption onto magnetic ion‐exchange beads showed that the second order rate equation was favorable. It was observed that after six adsorption–elution cycle, magnetic beads can be used without significant loss in trypsin adsorption capacity. Finally, the magnetic beads were used for separation of bovine serum albumin (BSA) and trypsin from binary solution in a batch system. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Synthesis and characterization of biodegradable block copolymer pluronic‐b‐poly(L‐lysine)

This study presented the investigations on the synthesis of a novel biodegradable block copolymer of pluronic‐b‐poly(L ‐lysine) (pluronic‐b‐PLL), which combined the characteristics of aliphatic polyester and poly(amino acids). The synthesis work started with end‐capping of pluronic with N‐t‐butoxycarbonyl‐L ‐phenylalanine using dicyclohexylcarbodiimide in the presence of 4‐dimethylaminopyridine, followed by a deprotection process to obtain the amino‐terminated pluronic; the new primary amino group in the modified pluronic initiated ring‐opening polymerization of amino acid N‐carboxyanhydride, which afforded the pluronic‐b‐poly(N^ε‐(Z)‐L ‐lysine) block copolymer. Finally, removal of the side‐chain N^ε‐(carbonybenzoxy) end protecting groups yields the block copolymer of pluronic‐b‐PLL. The products were characterized by ¹H‐NMR, FTIR, DSC, and GPC. The block copolymer micelle containing the anticancer drug paclitaxel was prepared by the double emulsion method. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Preparation of poly(acrylamide) grafted onto crosslinked poly (HEMA-MMA-EGDMA) beads for the removal of phenol

ABSTRACT

Poly(acrylamide) (PAAM) was grafted onto crosslinked poly(hydroxy ethyl methacrylate) (HEMA)-based beads for the removal of phenol from aqueous solution. A beaded polymer with a PAAM surface shell was prepared in two steps: synthesis of crosslinked poly (HEMA (50% mol) - MMA (40% mol) - EGDMA (10% mol)) terpolymers spherical beads (200–420 µm) (resin 1) via the suspension polymerization method; and the grafting of PAAM was carried out by redox initiation from hydroxyl groups on resin1 by using cerium (IV) ammonium nitrate as the initiator.

The resulting polymeric sorbent (resin 2) with about 82 wt.% grafted PAAM has been demonstrated to be efficient to remove phenol from water. Moreover, phenol sorption capacities of resin 1 and resin 2 were compared and sorption experiments were performed depending on the initial phenol concentration and pH. Kinetic measurements and models were studied for resin 1 and resin 2.     

Immobilization of glucoamylase on the plain and on the spacer arm‐attached poly(HEMA‐EGDMA) microspheres

Immobilization glucoamylase onto plain and a six‐carbon spacer arm (i.e., hexamethylene diamine, HMDA) attached poly(2‐hydroxyethylmethacrylate‐ethyleneglycol dimethacrylate) [poly(HEMA‐EGDMA] microspheres was studied. The microspheres were prepared by suspension polymerization and the spacer arm was attached covalently by the reaction of carbonyl groups of poly(HEMA‐EGDMA). Glucoamylase was then covalently immobilized either on the plain of microspheres via CNBr activation or on the spacer arm‐attached microspheres via CNBr activation and/or using carbodiimide (CDI) as a coupling agent. Incorporation of the spacer arm resulted an increase in the apparent activity of the immobilized enzyme with respect to enzyme immobilized on the plain of the microspheres. The activity yield of the immobilized glucoamylase on the spacer arm‐attached poly(HEMA‐EGDMA) microspheres was 63% for CDI coupling and 82% for CNBr coupling. This was 44% for the enzyme, which was immobilized on the plain of the unmodified poly(HEMA‐EGDMA) microspheres via CNBr coupling. The K_m values for the immobilized glucoamylase preparations (on the spacer arm‐attached microspheres) via CDI coupling 0.9% dextrin (w/v) and CNBr coupling 0.6% dextrin (w/v) were higher than that of the free enzyme 0.2% dextrin (w/v).The temperature profiles were broader for both immobilized preparations than that of the free enzyme. The operational inactivation rate constants (k_iop) of immobilized enzymes were found to be 1.42 × 10^?5 min^?1 for CNBr coupled and 3.23 × 10^?5 min^?1 for CDI coupled glucoamylase. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 2702–2710, 2001     

2‐Hydroxypropylmethacrylate based mono‐ and bifunctional gel beads prepared by suspension polymerization

Spherical and swellable gel beads in the size range 35–200 µm were prepared by suspension polymerization of 2‐hydroxypropylmethacrylate (HPMA). In the proposed method, a mixture of cyclohexanol and octanol was used as a diluent phase dispersed in an aqueous medium including poly(vinyl pyrrolidone) (PVP) as the stabilizer. The polymerization was initiated within the organic phase including the monomer and the crosslinker (ethylene glycol dimethacrylate) by an oil soluble initiator benzoyl peroxide. Spherical and swellable gel beads carrying both hydroxyl and carboxyl functional groups were also prepared by suspension copolymerization of HPMA and a water soluble comonomer (methacrylic acid). For this purpose, the suspension polymerization method proposed for HPMA was modified by using poly(vinyl alcohol) as a stabilizer instead of PVP. The effect of initiator concentration, polymerization temperature, monomer/diluent ratio, crosslinker concentration, stirring rate on yield, average size, size distribution, and carboxyl content of the HPMA based gel beads, were investigated. The swelling characteristics of the gel beads were defined. © 2000 Society of Chemical Industry     

Telechelic poly(L‐lactic acid) for dilactide production and prepolymer applications

The suitability of different types of telechelic poly(lactic acid) (PLA) copolymers for dilactide production and prepolymer products was evaluated. L ‐lactic acid (L ‐LA) was copolymerized with 1,4‐butanediol, pentaerythritol, adipic acid, or 1,2,3,4‐butanetetracarboxylic acid (1,2,3,4‐BTCA). The influence of branching, the choice of catalyst, and the type of terminal groups on the properties and the thermal stability of the end product was determined. Carboxyl‐termination of PLA was shown to lead to higher molar masses than hydroxyl‐termination. The observed differences in the molar masses were explained by the lower thermal stability of the hydroxyl‐terminated PLA, as evidenced by the faster depolymerization rate of the hydroxyl‐terminated polymers and their higher tendency to undergo racemization. Sn(Oct)₂ was found to be a more effective copolymerization catalyst than Fe(OAc)₂ in terms of the final molar masses obtained. It was additionally found that the amount of chains not attached to the comonomers decreased toward longer polymerization times and was typically higher for the hydroxyl‐terminated copolymers. The results suggest that predominant carboxyl‐termination would increase the thermal stability of PLA polymers, whereas hydroxyl‐termination could be utilized to increase the production speed and efficiency of dilactide. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Adsorption of Ni2+ from aqueous solutions by novel polyethyleneimine‐attached poly(p‐chloromethylstyrene) beads

In this study Ni²⁺ adsorption properties of polyethyleneimine (PEI)‐attached poly(p‐chloromethylstyrene) (PCMS) beads were investigated. Spherical beads with an average size of 186 μm were obtained by the suspension polymerization of p‐chloromethylstyrene conducted in an aqueous dispersion medium. Owing to the reasonably rough character of the bead surface, PCMS beads had a specific surface area of 14.1 m²/g. PEI chains could be covalently attached onto the PCMS beads with equilibrium binding capacities up to 208 mg PEI/g beads, via a direct chemical reaction between the amine and chloro‐methyl groups. After PEI adsorption with 10% (w/w) initial PEI concentration, free amino content of PEI‐attached PCMS beads was determined as 0.91 mEq/g. PEI‐attached PCMS beads were utilized as adsorbents in the adsorption/desorption of Ni²⁺ ions from synthetic solutions. The adsorption process was fast; 90% of adsorption occurred within 90 min, and equilibrium was reached at around 2 h. Adsorption capacity was obtained to be 78.2 mg/g at a pH of about 6.0. The chelating beads can be easily regenerated by 0.1 M HNO₃ with higher effectiveness. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 2467–2473, 2002     

A comprehensive single‐particle model for solid‐state polymerization of poly(L‐lactic acid)

We propose here, a comprehensive model for the solid‐state polymerization (SSP) of a low to moderate molecular weight (MW) prepolymer of lactic acid, to produce high MW poly(L ‐lactic acid) (PLLA). The reactions are rationally assumed to occur only in the amorphous region, and effective concentrations of end groups, vary with crystalinity, X_c, during SSP. We estimate byproduct diffusivities, D, using free volume theory. The effects of various parameters on the SSP of PLLA prepolymer have been examined with respect to the optimum MW, X_c and D. We introduce self‐consistently, scaling factors of ～ 0.27, in the experimental procedure, to determine via ¹⁹F‐NMR, concentrations of the end groups, after converting them to fluorinated ester groups. The relevant reaction rate constants are obtained by fitting to early time data from representative SSP experiments at 150°C, under high vacuum, on PLLA prepolymer powder (i.e., spherical geometry) of number average MW, M_n0 ～ 10,200 Da, which attains M_n ～ 150,000 Da, via SSP. The subsequent successful comparison of the model predictions with experimental data throughout the entire SSP duration indicates that the model is comprehensive and accounts for all the relevant phenomena occurring during the SSP to synthesize high MW PLLA. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

A robust affinity chromatography system based on ceramic monoliths coated with poly(amino acid)‐based polymeric constructs

Traditional chromatographic separation systems are disadvantaged by low flow rates, a high pressure drop across the column, low capacity and poor reusability. Searching for more efficient separation systems we introduced the use of a ceramic monolith as robust support in bioseparations. A coating consisting of l ‐asparagine as ligand, poly(l ‐lysine) as spacer arm and a commercial poly(ethylene acrylic acid) film forming copolymer network (Michem 4983‐40R) was developed as a coating for these ceramic monoliths. Poly(l ‐lysine) was synthesized by ring‐opening polymerization of ε‐trifluoroacetyl‐l ‐lysine N‐carboxyanhydride and coupled to a commercial film‐forming poly(ethylene acrylic acid) network. This construct was then ‘decorated’ with l ‐asparagine via the terminal amino functional groups of poly(L‐lysine) and coated onto the ceramic monolith to selectively bind l ‐asparaginase. Adsorption/elution experiments showed reversible binding between l ‐asparagine and l ‐asparaginase, and the subsequent release of l ‐asparaginase, and between 83% and 94% of the active enzyme was recovered by elution with d ‐asparagine and NaCl solutions. The functional activity of the eluted l ‐asparaginase was verified by a Nessler's assay. While traditional separation processes (adsorption and elution) using gel bead packings take many hours, the ceramic monolith system achieves the same of level of separation in about 1 h. This new system served as a proof of concept for its application in protein separation and purification. This work paves the way to a better understanding of the use of ceramic monoliths as stationary phase coated with a stable polymer construct for more robust and efficient supports in affinity chromatography. © 2020 Society of Industrial Chemistry     

Synthesis and thermal properties of poly(methyl methacrylate)‐poly(L‐lactic acid)‐poly(methyl methacrylate) tri‐block copolymer

Poly(methyl methacrylate)‐poly(L ‐lactic acid)‐poly(methyl methacrylate) tri‐block copolymer was prepared using atom transfer radical polymerization (ATRP). The structure and properties of the copolymer were analyzed using infrared spectroscopy, gel permeation chromatography, nuclear magnetic resonance (¹H‐NMR, ¹³C‐NMR), thermogravimetry, and differential scanning calorimetry. The kinetic plot for the ATRP of methyl methacrylate using poly(L ‐lactic acid) (PLLA) as the initiator shows that the reaction time increases linearly with ln[M]₀/[M]. The results indicate that it is possible to achieve grafted chains with well‐defined molecular weights, and block copolymers with narrowed molecular weight distributions. The thermal stability of PLLA is improved by copolymerization. A new wash‐extraction method for removing copper from the ATRP has also exhibits satisfactory results. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Different dispersion polymerization strategies influence the quality of fluorescent poly (St‐co‐GMA) microspheres

The polymerization strategy plays a vital role in the preparation of functional microspheres. In this work, fluorescent poly (styrene‐co‐glycidyl methacrylate) (PSt‐GMA) microspheres were synthesized via one‐stage and two‐stage dispersion polymerization with 4‐Bis(5‐phenyl‐1,3‐oxazol‐2‐yl)benzene (POPOP) as fluorescence agent. SEM and DLS were adopted to characterize the properties of prepared microspheres. The UV‐vis and fluorescence spectroscopy were used to analyze the mechanisms of two‐stage dispersion polymerization. The experimental results showed that the size distribution and fluorescence intensity of prepared microspheres could be improved by two‐stage dispersion polymerization compared to one‐stage dispersion polymerization. In addition, according to UV‐vis, the interactions between POPOP and Poly (N‐vinyl pyrrolidone) (PVP) as well as POPOP and Glycidyl methacrylate (GMA) could affect the particle size and its distribution. UV‐vis and fluorescence spectra implied that the POPOP existed outside of the particle's core via two‐stage strategy. The monomer conversion of styrene was similar at the beginning of reaction; however, the monomer conversion of styrene by two‐stage strategy was higher than that of by one‐stage strategy. In a word, two‐stage dispersion polymerization could prepare fluorescent microspheres with the monodispersion micrometer‐size and high quality. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41927.     

Surfactant‐free nanoparticles of poly(DL‐lactide‐co‐glycolide) prepared with poly(L‐lactide)/ poly(ethylene glycol)

Surfactant‐free nanoparticles of poly(DL ‐lactide‐co‐glycolide) (PLGA) nanoparticles were prepared with or without poly(L ‐lactide)‐poly(ethylene oxide) (LE) diblock copolymer (abbreviated as PLGA/LE and PLGA nanoparticles) by dialysis method. LE diblock copolymer was used to make PLGA nanoparticles to alternate conventional surfactant. The size of PLGA and PLGA/LE nanoparticles was 295.3 ± 171.3 and 307.6 ± 27.2 nm, respectively, suggesting LE diblock copolymer might be coated onto the surface of nanoparticles. Observation of scanning electron microscope (SEM) showed that PLGA/LE nanoparticles have spherical shapes ranging ～ 200–500 nm. In ¹H‐NMR study, characteristic peaks of the methyl protons of PLGA disappeared in D₂O, whereas characteristic peaks of the methyl proton of both PEG and PLGA were shown in both CDCl₃ and D₂O, indicating that LE diblock copolymer coated on the surface of the PLGA nanoparticles. The higher the initial content of drug, the higher the drug contents and the lower the loading efficiency. PLGA/LE nanoparticles at higher drug contents resulted in slower adriamycin·HCl (ADR) release rate than that of lower drug contents. Also, slower release rate of ADR was achieved by entrapped into the PLGA/LE nanoparticles, whereas LE polymeric micelles showed rapid ADR release. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 1116–1123, 2003     

接枝微粒材料PMAA/SiO_2对碱性氨基酸(精氨酸)的吸附性能

采用接枝法将甲基丙烯酸(MAA)接枝于微米级硅胶表面,制得了接枝有甲基丙烯酸的接枝微粒PMAA/SiO2,采用红外光谱(FTIR)对其化学结构进行了表征,用金相显微镜观察了接枝微粒的形貌。采用静态法研究了功能微粒PMAA/SiO2对碱性氨基酸精氨酸吸附性能,考察了介质pH、离子强度及温度对其吸附性能的影响,探索了吸附机理。研究结果表明,在较大的pH范围内,接枝微粒PMAA/SiO2对碱性氨基酸精氨酸表现出很强的吸附能力,而对酸性氨基酸的吸附能力则很弱;随着介质pH值的增大,PMAA/SiO2对精氨酸的吸附能力呈现先增强后减弱的规律,在pH=7处,吸附容量可以达到239mg.g-1;温度升高,吸附容量减小;盐度增大,吸附容量降低。     

Effect of the MMA content on the emulsion polymerization process and adhesive properties of poly(BA‐co‐MMA‐co‐AA) latexes

In the past work, the shear resistance of pure poly(n‐butyl acrylate) was low, even incorporation of inorganic filler, silica in the composition. It is well‐known that the copolymerization of n‐butyl acrylate (BA) with methyl methacrylate (MMA) will increase the glass transition temperature, and enhance the shear resistance of acrylic polymers. In the current work, the preparation of a series of acrylic water‐borne pressure‐sensitive adhesives (PSAs) with the controlled composition and structure for the copolymerization of BA and acrylic acid (AA) with different MMA contents, poly(BA‐co‐MMA‐co‐AA) was reported and its effects on adhesive properties of the latices were investigated. The latices of poly(BA‐co‐MMA‐co‐AA) were prepared at a solid content of 50% by two‐stage sequential emulsion polymerization, and this process consisted of a batch seed stage giving a particle diameter of 111 nm, which was then grown by the semicontinuous addition of monomers to final diameter of 303 nm. Dynamic light scattering (DLS) was used to monitor the particle diameters and proved that no new nucleation occurred during the growth stage. Copolymerization of BA with MMA raised the glass transition temperature (T_g) of the soft acrylic polymers, and had the effect of improving shear resistance, while the loop tack and peel adhesion kept relatively high. The relationship between pressure‐sensitive properties and molecular parameters, such as gel content and molecular weight, was evaluated. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011