Preparation of gold nanoparticles on poly(methyl methacrylate) nanospheres with surface-grafted poly(allylamine)

A facile method for in situ anchoring of gold nanoparticles onto the surface of polymer nanospheres was successfully developed in this study. As polymer nanospheres, amphiphilic poly(methyl methacrylate) (PMMA)/poly(allylamine) (PAA) nanospheres were prepared by graft copolymerization of methyl methacrylate from PAA. The gold nanoparticles anchored were spherically symmetric and the average sizes were ∼12 nm for all samples. It was found that surface-grafted PAA effectively anchored and stabilized gold nanoparticles for a long period of time.     

Poly(methyl methacrylate) nanoparticles prepared through microwave emulsion polymerization

The emulsifier‐free emulsion polymerization of methyl methacrylate (MMA) was conducted with microwave irradiation. Superfine and monodisperse poly(methyl methacrylate) (PMMA) microspheres were obtained. Microwave irradiation notably promoted the polymerization reaction. This phenomenon was ascribed to the acceleration of the initiator [potassium persulfate (KPS)] decomposition by microwave irradiation. The experimental results revealed that the apparent activation energy of KPS decomposition decreased from 128.3 to 106.0 kJ/mol with microwave irradiation. The average particle size of the prepared PMMA latex was mainly controlled with the MMA concentration; it increased linearly from 103 to 215 nm when the MMA concentration increased from 0 to 0.3 mol/L and then remained almost constant at MMA concentrations of 0.3–1.0 mol/L. The KPS concentration had no effect on the average particle size, but the particle size dispersity was significantly reduced by a high KPS concentration. With a mixed polymerization phase (water/acetone = 1:3 v/v) or a redox initiation system, PMMA nanoparticles were obtained with an average particle size of 45 or 67 nm, respectively. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 2815–2820, 2004     

Sonochemical deposition of silver nanoparticles on wool fibers

Silver nanoparticles were deposited on the surface of natural wool with the aid of powered ultrasound. The average particle size was 5–10 nm, but larger aggregates of 50–100 nm were also observed. The sonochemical irradiation of a slurry containing wool fibers, silver nitrate, and ammonia in an aqueous medium for 120 min under an argon atmosphere yielded a silver–wool nanocomposite. By varying the gas and reaction conditions, we could achieve control over the deposition of the metallic silver particles on the surface of the wool fibers. The resulting silver‐deposited wool samples were characterized with X‐ray diffraction, transmission electron microscopy, high‐resolution transmission electron microscopy, high‐resolution scanning electron microscopy, electron‐dispersive X‐ray analysis, Brunauer, Emmett, and Teller physical adsorption method, X‐ray photoelectron spectroscopy, and Raman and diffused reflection optical spectroscopy. The results showed that the strong adhesion of the silver to the wool was a result of the adsorption and interaction of silver with sulfur moieties related to the cysteine group. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 1732–1737, 2007     

Poly(methyl methacrylate)/POSS hybrid networks by type II photoinitiated free radical polymerization

A new strategy for organic–inorganic hybrid networks is presented through in‐situ Type II photoinitiated polymerization of methyl methacrylate with diethanolamino‐functionalized polyhedral oligomeric silsesquioxanes (POSS‐DEA). The diethanolamino groups are simply incorporated onto POSS nanoparticles by nucleophilic ring‐opening reaction of commercially available epoxycyclohexyl POSS and diethanol amine. The photoinitiated polymerization of methyl methacrylate in the presence of benzophenone as photosensitizer and POSS‐DEA as hydrogen donor leads to poly(methyl methacrylate) (PMMA)/POSS hybrid networks under UV light irradiation. The morphology and thermal properties of hybrid networks are investigated by using Fourier transform infrared spectroscopy, differential scanning calorimetry, thermogravimetric analysis, and transmission electron microscopy. The morphology results confirm that POSS cages are homogeneously distributed in PMMA matrix at the molecular levels, whereas the thermal analyses shows that the obtained hybrid networks have higher glass transition temperatures and better thermal stabilities compared to parent PMMA homopolymer. POLYM. COMPOS., 35:1614–1620, 2014. © 2013 Society of Plastics Engineers     

Structural characterization,thermal properties,and density functional theory studies of PMMA‐maghemite hybrid material

Maghemite (γ‐Fe₂O₃)‐poly(methyl methacrylate) (PMMA) nanocomposites were prepared by grafting 3‐(trimethoxy‐silyl) propyl methacrylate on the surface of maghemite nanoparticles, this process being followed by methyl methacrylate radical polymerization. Three different hybrids with 0.1, 0.5, and 2.5 wt% of maghemite nanoparticles were studied. The results indicate that these nanocomposites consist of a homogeneous PMMA matrix in which maghemite nanoparticles with a bimodal size distribution are embedded. The existence of covalent bonding between silane monomers and atoms on the maghemite surface was evidenced. AFM images showed a clear increase in surface roughness for increasing maghemite content. The thermal stability of PMMA‐maghemite nanocomposites is higher than that of pure PMMA and increases for increasing maghemite content. The results of our theoretical studies indicate that the electron density in the maghemite nanoparticle is not homogenous, the low electron density volumes being supposed to be radical trappers during PMMA decomposition, thus acting as a thermal stabilizer. POLYM. COMPOS., 51–60, 2016. © 2014 Society of Plastics Engineers     

“胶乳共混法”制备天然橡胶／二氧化硅纳米复合材料及其性能

采用γ-甲基丙烯酰氧基丙基三甲氧基硅烷（KH570）改性纳米二氧化硅（SiO2）,然后通过乳液聚合接枝上聚甲基丙烯酸甲酯（PMMA）,再将其与甲基丙烯酸甲酯（MMA）改性的天然胶乳,通过胶乳共混法制备天然橡胶／二氧化硅纳米复合材料,结果显示,纳米二氧化硅表面接枝上了PMMA,二氧化硅在橡胶基体中分散良好,粒径在60～100nm之间,得到的胶膜力学性能有很大的提高。     

Molecular weight studies of the γ‐irradiation degradation of poly(methyl methacrylate) doped with poly(p‐sulfanilamide)

The protection of some poly(methyl methacrylate) (PMMA) samples against γ rays was investigated in the absence and presence of poly(p‐sulfanilamide). Pure PMMA (without additives) and PMMA–poly(p‐sulfanilamide) blend samples were irradiated with γ rays for different exposure doses (5, 15, 25, 35, 50, 75, and 100 kGy). The viscosity‐average molecular weights were determined and thin‐layer chromatography measurements were carried out after each irradiation dose. The maximum protection against γ rays was found when 1% poly(p‐sulfanilamide) was used. The radiation chemical yield for main scission (G_s) was calculated and had lower values in the case of 1% poly(p‐sulfanilamide). The energy absorption per scission was maximum for 1% poly(p‐sulfanilamide), and this confirmed the obtained G_s data. From thin‐layer chromatography studies, it was observed that both the retention factor (R_f) values and polydispersity of the PMMA samples increased with an increasing exposure dose. The effect of γ irradiation on PMMA films doped with 1% poly(p‐sulfanilamide) was investigated with UV spectroscopy after the extraction of the additives. A change in the intensity of the absorption bands with an increasing irradiation dose was recorded. It is suggested that PMMA films doped with this type of polymer can be used as dosimeters. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Ultrasound Irradiation Coating of Silver Nanoparticle on ABS Sheet Surface

Ultrasound irradiation was used for anchoring silver nanoparticles with an average size from 10 to 50 nm onto the surface of acrylonitrile–butadiene–styrene (ABS) sheets 1 mm thick. The sonochemical reduction was carried out under argon at room temperature. Silver nanoparticles were obtained and deposited on the ABS surface by the irradiation of a mixture containing ABS plaques, silver nitrate (AgNO₃), ethylene glycol and water. Reaction conditions such as temperature, AgNO₃ concentration and irradiation time were controlled to achieve the deposition of silver nanoparticles onto the surface of ABS sheets. Nano silver coated ABS samples were characterized by X-ray diffraction, transmission and scanning electron microscopy, Raman spectroscopy and antimicrobial activity, specifically against the fungus, Aspergillius niger, and the bacterium, Escherichia coli. The observed results may be applied in the design of industrial ABS sheets with antimicrobial characteristics.     

Effect of noncovalent chemical modification on the electrical conductivity and tensile properties of poly(methyl methacrylate)/carbon nanotube composites

Noncovalent chemical modification by initiated chemical vapor deposition technique is applied to carbon nanotubes (CNTs) to reduce average agglomerate size of the nanoparticles in the polymer matrix and to improve surface interaction between the composite constituents. CNT surfaces are coated conformally with thin poly(glycidyl methacrylate) (PGMA) polymer film and coated nanoparticles are incorporated in poly(methyl methacrylate) (PMMA) polymer matrix using solvent casting technique. Conformal PGMA coatings around individual nanotubes were identified by scanning electron microscopy analysis. Transmission electron microscopy and optical microscopy analyses show homogeneous composite morphology for composites prepared by using PGMA coated nanotubes. Fourier Transform Infrared and X‐ray photoelectron spectroscopy analyses show the successful deposition of polymer with high retention of epoxide functionality. PGMA coating of CNTs exhibits improvement in electrical conductivity and tensile properties of PGMA‐CNT/PMMA systems when compared with uncoated nanoparticles. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Hydrophobic magnesium hydroxide nanoparticles via oleic acid and poly(methyl methacrylate)-grafting surface modification

Hydrophobic magnesium hydroxide nanoparticles were obtained by means of grafting poly(methyl methacrylate) (PMMA) onto the surface of nanoparticles after oleic acid (OA) modification. The introduction of functional double bonds was firstly conducted on the surface of nanoparticles by OA modification, followed by dispersion polymerization on the particles surface in ethanol solution using methyl methacrylate (MMA) as monomer, azoisobutyronitrile (AIBN) as initiator and polyvinylpyrrolidone (PVP) as stabilizer to graft PMMA on the surface of OA-modified magnesium hydroxide. The obtained composite particles were characterized by XRD, FTIR, TGA, FESEM-EDS, and the compatibility with organic solution was determined by sedimentation test. The results show that the organic macromolecule PMMA could be successfully grafted on the surface of OA-modified magnesium hydroxide nanoparticles, with the dispersibility and the compatibility of nanoparticles greatly improved in organic phase.     

Synthesis of poly(butyl acrylate)—laponite nanocomposite nanoparticles for improving the impact strength of poly(lactic acid)

This work aims at preparing and characterizing poly(butyl acrylate) (PBA)—laponite (LRD) nanocomposite nanoparticles and nanocomposite core (PBA‐LRD)‐shell poly(methyl methacrylate) (PMMA) nanoparticles, on the one hand, and the morphology and properties of poly(lactic acid) (PLA)‐based blends containing PBA‐LRD nanocomposite nanoparticles or (PBA‐LRD)/PMMA core–shell nanoparticles as the dispersed phase, on the other hand. The PBA and (PBA‐LRD)/PMMA nanoparticles were synthesized by miniemulsion or emulsion polymerization using LRD platelets modified by 3‐methacryloxypropyltrimethoxysilane (MPTMS). The grafting of MPTMS onto the LRD surfaces was characterized qualitatively using FTIR and quantitatively using thermogravimetric analysis (TGA). The amounts of LRD in the PBA‐LRD nanocomposites were characterized by TGA. The PBA/PMMA core–shell particles were analyzed by ¹H‐NMR. Their morphology was confirmed by SEM and TEM. Mechanical properties of (PBA‐LRD)/PLA blends and (PBA‐LRD)/PMMA/PLA ones were tested and compared with those of the pure PLA, showing that core–shell particles allowed increasing impact strength of the PLA while minimizing loss in Young modulus and tensile strength. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Preparation and photocatalytic activity of zinc sulfide/polymer nanocomposites

ZnS nanoparticles were prepared on the surface of polyacrylonitrile (PAN) and methyl methacrylate (MMA)/butyl methacrylate (BMA)/acrylic acid (AA) copolymer nanofibers. The MMA–BMA–AA copolymer was synthesized by bulk radical polymerization using 2,2′‐azobisisobutyronitrile as the initiator. The PAN and MMA–BMA–AA copolymer nanofibers were prepared by electrospinning. Zinc ions were introduced onto the surface of the nanofibers by coordination with the carboxyl of AA. Then, sulfide ions were added to react with zinc ions to form ZnS nanoparticles. The average diameter of the nanofibers was about 300 nm, and the diameter of the ZnS nanoparticles was about 10 nm. The band position of the photoluminescence spectrum of the ZnS/PAN and MMA–BMA–AA nanocomposites had an 80‐nm blueshift in comparison with that of the corresponding bulk ZnS sample. The ZnS/PAN and MMA–BMA–AA nanocomposites had high photocatalytic activity for the degradation of phenol under ultraviolet irradiation; the photocatalytic activity changed indistinctively after it was used repeatedly (6 times). The nanofibers of PAN and MMA–BMA–AA not only dispersed but also stabilized the ZnS nanoparticles. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Characterization by dilute solution and rheological methods of polystyrene and poly(methyl methacrylate) produced with a tetrafunctional peroxide initiator

Polystyrene (PS) and poly(methyl methacrylate) (PMMA) samples produced by the bulk homopolymerization of styrene and methyl methacrylate with a tetrafunctional peroxide initiator (JWEB50) are characterized in detail by various solution and rheological methods. For comparison purposes, “linear” PS and PMMA samples were produced under similar conditions with a monofunctional initiator (TBEC). The four sample types were characterized by size exclusion chromatography (SEC) setups to determine molecular weight, radius of gyration, and intrinsic viscosity distributions. Contraction factors were calculated and indicated evidence of branching for polystyrene produced with JWEB50 while no such effects were observed with PMMA. The rheological behavior of the samples was subsequently investigated by performing oscillatory shear and creep experiments. Compared to the “linear” material, samples produced with JWEB50 exhibited a reduction in zero‐shear viscosity that was attributed to long‐chain branching. Retardation spectra were calculated based on creep data and converted to dynamic compliances that were then combined with the oscillatory data. This provided master curves spanning a much wider frequency range than could be obtained experimentally. Examination of various viscoelastic functions showed evidence of long‐chain branching for both polystyrene and poly(methyl methacrylate) samples produced with JWEB50. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 1340–1355, 2007     

Preparation and properties of chitosan‐graft‐poly(methyl methacrylate) nanoparticles using potassium diperiodatocuprate (III) as an initiator

Graft copolymer nanoparticles prepared from chitosan (CS) and methyl methacrylate (MMA) monomer were synthesized in aqueous solution by using potassium diperiodatocuprate [Cu(III)] as an initiator and characterized in terms of particle size, zeta potential, transmission electron microscopy (TEM), Fourier transform infrared spectroscopy, thermal stability, and X‐ray diffraction spectrometry. The results indicated that CS was covalently linked to poly(methyl methacrylate) (PMMA), and the resulting copolymers formed nanoparticles. These nanoparticles [prepared at 35°C, in a weight ratio of MMA/CS of 5 : 1 and with a Cu(III) concentration of 1.5 × 10⁻³ mol/L] were 54–350 nm in size, with a mean hydrodynamic diameter of 183 ± 3 nm and were highly uniform in particle‐size distribution, with a rather spherical shape and an obvious positive charge surface. The effect of reaction conditions such as Cu(III) concentration, reaction temperature, and the weight ratio of MMA/CS on the mean particle size was also investigated. Insulin‐loaded nanoparticles were prepared, and their maximal association efficiency was up to 85.41%. The experiment of release in vitro showed that the nanoparticles gave an initial burst release followed by a slowly sustained one. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

The influence of oxide nanoparticles on the kinetics of free radical methyl methacrylate polymerization in bulk

A series of poly(methyl methacrylate) (PMMA) nanocomposites were synthesized using free radical polymerization in bulk, by addition of 1 vol% of oxide nanoparticles (silica, alumina, and titania), differing in the nature and type. The influence of nanofiller presence on the kinetics of methyl methacrylate (MMA) free radical polymerization was investigated. For this purpose, the kinetic model that includes the contribution from the first‐order reaction and the autoacceleration was applied on data obtained following the isothermal polymerization at 70°C by differential scanning calorimetry (DSC). The effect of the size and the surface nature of nanofillers on the interfacial layer thickness (d), as well as the influence of d on the glass transition temperature (T_g) of PMMA hybrid materials was studied. It was found that hydrophilic particles accelerated the initiator decomposition and affected the monomer polymerization on the surface, which caused the formation of thicker interfacial layer compared to the one around hydrophobic fillers. The addition of smaller nanoparticles size decreased the glass transition temperature of pure poly(methyl metacrylate). The linear increase of PMMA T_g value with increasing the polymeric interfacial layer was determined. The T_g values of pure PMMA and PMMA nanocomposite with d of 1.4 nm were estimated to be the same. POLYM. COMPOS. 34:1342–1348, 2013. © 2013 Society of Plastics Engineers     

Preparation of cadmium sulfide/poly(methyl methacrylate) composites by precipitation with compressed CO2

Cadmium sulfide (CdS) nanoparticles and poly(methyl methacrylate) (PMMA) were first synthesized in methyl methacrylate (MMA)/sodium bis(2‐ethylhexyl) sulfosuccinate (AOT) microemulsion, in which MMA acts as the solvent and monomer. Then compressed CO₂ was used as an antisolvent to precipitate the CdS and PMMA simultaneously. Using this method, a CdS/PMMA composite was successfully prepared. The CdS nanoparticles dispersed in the polymer matrices were characterized by transmission electron microscopy. The higher pressure is favorable to producing CdS nanoparticles of smaller size. The phase structure of the obtained composite was characterized by X‐ray diffraction, which reveals that cubic CdS particles were formed. The FTIR spectra of the composite showed that there is no chemical bonding or strong interaction between CdS and PMMA. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 1643–1648, 2004     

Preparation of zirconia loaded poly(acrylate) antistatic hard coatings on PMMA substrates

Zirconia (ZrO₂) nanoparticles were synthesized by hydrolysis and condensation of zirconium‐n‐propoxide (ZNP) in 1‐propanol at the presence of methacrylic acid (MA), serving as a chelating agent for ZNP. The formed nanoparticles were chemically modified by the UV‐curable coupling agent, 3‐(trimethoxysilyl)propyl methacrylate (MSMA). The modified particles were then crosslinked with the hexa‐functional monomer, dipentaerythritol hexaacrylate (DPHA), to produce transparent antistatic hard coatings on poly(methyl methacrylate) (PMMA) substrates. Sizes of the modified particles, as determined by the dynamic light scattering technique, fell over a small range of 2–20 nm. Chemical analyses of the particles and the coatings were performed using FTIR and/or solid ²⁹SiNMR spectroscopy. Surface resistivities of the coatings were measured, and the results indicated that with inclusion of 10 wt % modified zirconia, surface resistivity of ～10⁹ Ω/sq could be achieved, which amounted to ～6 order magnitude lower than that of the particle‐free polymeric binder. Furthermore, this antistatic coating was very hard with pencil hardness of 8–9H, and attached perfectly to the PMMA substrate according to the peel test. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42411.     

Controlled grafting from poly(vinylidene fluoride) microfiltration membranes via reverse atom transfer radical polymerization and antifouling properties

A reverse atom transfer radical polymerization (RATRP) with benzoyl peroxide (BPO)/CuCl/2,2-bipyridine (Bpy) was applied onto grafting of poly(methyl methacrylate) (PMMA) and poly(poly(ethylene glycol) methyl ether methacrylate) (PPEGMA) from poly(vinylidene fluoride) (PVDF) microfiltration (MF) membrane surfaces, including the pore surfaces. The introduction of peroxide and hydroperoxide groups onto the PVDF membranes was achieved by ultraviolet (UV) irradiation in nitrogen, followed by air exposure. RATRP from UV pretreated hydrophobic PVDF membranes was then performed for attaching well-defined homopolymer. The chemical composition of the modified PVDF membrane surfaces was characterized by attenuated total reflectance (ATR) FT-IR spectroscopy and X-ray photoelectron spectroscopy (XPS). The surface and cross-section morphology of membranes were studied by scanning electron microscopy (SEM). The pore sizes of the pristine PVDF and the PMMA grafted PVDF membranes were measured using micro-image analysis and process software. With increase of graft concentration, the pore size of the modified membranes decreased and became uniform. Kinetic studies of homogeneous (in toluene solution) system revealed a linear increase in molecular weight with the reaction time and narrow molecular weight distribution, indicating that the chain growth from the membrane surface was a “controlled” or “living” grafting process. The introduction of the well-defined PMMA on the PVDF membrane gave rise to hydrophilicity. Protein adsorption and protein solution permeation experiments revealed that the UV pretreated hydrophobic PVDF membrane subjected to surface-initiated RATRP of methyl methacrylate (MMA) and poly(ethylene glycol) methyl ether methacrylate (PEGMA) exhibited good antifouling property.     

Preparation and characterization of PS‐PMMA/ZnO nanocomposite films with novel properties of high transparency and UV‐shielding capacity

High transparent and UV‐shielding poly (styrene)‐co‐poly(methyl methacrylate) (PS‐PMMA)/zinc oxide (ZnO) optical nanocomposite films were prepared by solution mixing using methyl ethyl ketone (MEK) as a cosolvent. The films were characterized by X‐ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), ultraviolet–visible (UV–vis) spectra, high‐resolution transmission electron microscopy (HR‐TEM), and atomic force microscope (AFM). Cross‐section HR‐TEM and AFM images showed that the ZnO nanoparticles were uniformly dispersed in the polymer matrix at the nanoscale level. The XRD and FTIR studies indicate that there is no chemical bond or interaction between PS‐PMMA and ZnO nanoparticles in the nanocomposite films. The UV–vis spectra in the wavelength range of 200–800 nm showed that nanocomposite films with ZnO particle contents from 1 to 20 wt % had strong absorption in UV spectrum region and the same transparency as pure PMMA‐PS film in the visible region. The optical properties of polymer are greatly improved by the incorporation of ZnO nanoparticles. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Synthesis of well‐defined poly(methyl methacrylate) nanoparticles by reverse atom transfer radical polymerization in a microemulsion

Well‐defined poly(methyl methacrylate) (PMMA) with an α‐isobutyronitrile group and an ω‐bromine atom as the end groups was synthesized by the microemulsion polymerization of methyl methacrylate (MMA) at 70°C with a 2,2′‐azobisisobutyronitrile/CuBr₂/2,2′‐bipyridine system. The conversion of the polymerization reached 81.9%. The viscosity‐average molecular weight of PMMA was high (380,000), and the polydispersity index was 1.58. The polymerization of MMA exhibited some controlled radical polymerization characteristics. The mechanism of controlled polymerization was studied. The presence of hydrogen and bromine atoms as end groups of the obtained PMMA was determined by ¹H‐NMR spectroscopy. The shape and size of the final polymer particles were analyzed by scanning probe microscopy, and the diameters of the obtained particles were usually in the range of 60–100 nm. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 3670–3676, 2006