Swelling of hydrophilic polymers. III

The total volume change included gel and surrounded water with the swelling of five types of speherical cross-linked dextran (Sephadex) that are either nonionic (G) or possess one of four different ionic groups in the same molecular skeleton: CM: sodium carboxymethyl, SP: sodium sulphopropyl, DEAE: diethylaminoethyl chloride, and QAE: diethyl-(2-hydroxypropyl) aminoethyl chloride. All have been studied by dilatometry. The total volume decreased with the swelling of all Sephadexes. The maximum changes of total volume with the swelling in water were all negatives of CM, G, SP, (DEAE, QAE), which decrease in that order. These values did not depend on the concentration of sodium chloride and were closely related to the maximum heats of swelling. Total volume changes occurred by the dissociation of the ionic group of dextran derivatives that subtracted the total volume change due to hydration of Sephadex skeleton from the total volume change: ?21.6 ± 3.1 μL mmol^?1 for CM, ?2.8 ± 8.0 μL mmol^?1 for SP, +13.2 ± 4.4 μL mmol^?1 for DEAE, and +15.4 ± 4.6 μL mmol^?1 for QAE. These values are assumed to be reflected in the quantities of ions-water interaction of Sephadexes. © 1994 John Wiley & Sons, Inc.     

Swelling of hydrophilic polymers. IV

The swelling of five types of spherical crosslinked dextrans (Sephadex) that are either nonionic (G) or ionic [carboxymethyl (CM), sulphopropyl (SP), diethylaminoethyl (DEAE), and diethyl-(2-hydroxypropyl)aminoethyl (QAE)] in the same skeleton has been studied in water at different dissolved oxygen concentrations by microscopic observation and by dilatometry. The maximum specific volume, V_max/V₀ obtained by microscopic observation increased with the lowered dissolved oxygen concentration for each Sephadex. The change of the maximum specific volume was closely related to the changes of the dissolved oxygen concentrations. The maximum changes of the total volume took the larger negative values at the lower dissolved oxygen concentration. The effect of the difference in the dissolved oxygen on the change of the total volume with swelling was closely related to the viscosity B coefficient of the Jones-Dole equation. From these results, we conclude that the structure of water on the inside of the gel differs from that on the outside of the gel. © 1995 John Wiley & Sons, Inc.     

Rate of swelling of sodium polyacrylate

The kinetics of the swelling of sodium polyacrylate (NaPA), a hydrophilic polymer, was studied gravimetrically, by microscopic observation, and calorimetrically. The swelling process followed first-order kinetics and the rate constant was of the order of 10^?2 s^?1. The gravimetric method, however, was not useful for kinetic studies. The rate constant was depressed by the addition of sodium chloride. The activation energy of the swelling was 46.0 ± 6.2 (kJ mol^?1) and decreased with the increase in sodium chloride concentration. In acid solution, the activation energy was almost the same as that in water. The heat of the swelling was 196 ± 17 J g^?1 and did not vary with the addition of sodium chloride. © 1993 John Wiley & Sons, Inc.     

Durability and performance of polystyrene‐b‐poly(vinylbenzyl trimethylammonium) diblock copolymer and equivalent blend anion exchange membranes

Anion exchange membranes (AEM) are solid polymer electrolytes that facilitate ion transport in fuel cells. In this study, a polystyrene‐b‐poly(vinylbenzyl trimethylammonium) diblock copolymer was evaluated as potential AEM and compared with the equivalent homopolymer blend. The diblock had a 92% conversion of reactive sites with an IEC of 1.72 ± 0.05 mmol g^?1, while the blend had a 43% conversion for an IEC of 0.80 ± 0.03 mmol g^?1. At 50°C and 95% relative humidity, the chloride conductivity of the diblock was higher, 24–33 mS cm^?1, compared with the blend, 1–6 mS cm^?1. The diblock displayed phase separation on the length scale of 100 nm, while the blend displayed microphase separation (～10 μm). Mechanical characterization of films from 40 to 90 microns thick found that elasticity and elongation decreased with the addition of cations to the films. At humidified conditions, water acted as a plasticizer to increase film elasticity and elongation. While the polystyrene‐based diblock displayed sufficient ionic conductivity, the films' mechanical properties require improvement, i.e., greater elasticity and strength, before use in fuel cells. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41596.     

Novel PDMS‐based membranes: Sodium chloride and glucose permeability

Permeation of sodium chloride and glucose through polydimethylsiloxane‐poly(N‐isopropylacrylamide) (PDMS‐PNIPAAm) interpenetrating polymer networks (IPNs) of two different microstructures was investigated. We have successfully developed small‐molecule permeable IPNs, by modifying PDMS film structure. A group of PDMS films was prepared using conventional solvent casting (SC) method and another group produced by introducing oil, followed by SC and leaching the oil out (SCOL method). Scanning electron microscopy (SEM) and attenuated total reflection fourier transformer infrared (ATR‐FTIR) spectroscopy results confirmed the presence of PNIPAAm in the SC and SCOL IPNs. Results obtained from spectra of differential scanning calorimetry (DSC) showed that these IPNs had a phase transition temperature at about 32°C. Permeation measurements showed that the presence of PNIPAAm as the second phase in the IPN, improved the permeability of PDMS film. According to the results, maximum permeation coefficient was related to SCOL IPN containing 15.8% ± 0.3%PNIPAAm, at 23°C (5.98 × 10^?7 ± 7.93 × 10^?9 cm²/s for sodium chloride and 3.6 × 10^?7 ± 7 × 10^?9 cm²/s for glucose). These results suggested that these PDMS‐PNIPAAm IPNs with sodium chloride and glucose permeability may be further developed as ophthalmic biomaterials or corneal replacements. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

ESTIMATION OF LIMITING EQUIVALENT CONDUCTIVITY AND IONIC RADIUS OF TETRABORATE ANION FROM CONDUCTIVITY MEASUREMENTS OF CONCENTRATED TETRABORATE SOLUTIONS

The conductivities of aqueous solutions of sodium sulphate and sodium tetraborate at different concentrations were measured. Using a novel method, these data were used to determine the limiting equivalent ionic conductivity and ionic radius of tetraborate ion. It was found that the limiting equivalent ionic conductivity of tetraborate ion is 34.58 ohm^?1 cm² and the ionic radius of tetraborate is 3.507±0.076 Å.     

Characterization of Male and Female Jojoba Plants Employing Antioxidants,Lipid Peroxidation and Physiological Studies

Jojoba, [Simmondsia chinensis (Link) Schneider] is a commercially important dioecious, desert shrub which is mainly cultivated for liquid wax (oil) present in its seeds (40–60 %). The oil is being utilized by the cosmetic, pharmaceuticals, and other industries for certain formulations. In this study, gender based differences in biochemical and physiological parameters were examined in relation to natural drought conditions. The amount of protein, proline, cysteine, chlorophyll a and b, carotenoids and enzymatic activities were evaluated in leaves of male and female Jojoba genotypes. Significant differences between genders were found which was attributed to higher drought tolerance of males than females. Males showed higher contents of protein (113.05 ± 0.88 mg g^?1 FW), proline (95.13 ± 2.33 µmol g^?1 FW), cysteine (42.47 ± 2.69 µmol g^?1 FW) than females (proteins: 70.77 ± 0.52 mg g^?1 FW, proline: 66.61 ± 1.75 µmol g^?1 FW, cysteine: 17.84 ± 3.00 µmol g^?1 FW). Malondialdehyde (MDA) content was lower in male genotypes (18.29 ± 0.53 µmol g^?1 FW) than female genotypes (23.02 ± 0.70 µmol g^?1 FW). Higher activities of catalase (CAT) [0.088 ± 0.005 nkat mg^?1 protein], guaiacol peroxidase (GPX) [0.006 ± 0.001 nkat mg^?1 protein], glutathione reductase (GR) [9.02 ± 0.04 nkat mg^?1 protein], ascorbate peroxidase (APX) [4.28 ± 0.08 nkat mg^?1 protein] and superoxide dismutase (SOD) [151.75 ± 3.58 nkat mg^?1 protein] were found in males compared to females [CAT: 0.007 ± 00 nkat mg^?1 protein, GPX: 0.003 ± 00 nkat mg^?1 protein, GR: 6.40 ± 0.06 nkat mg^?1 protein, APX: 3.08 ± 0.06 nkat mg^?1 protein, SOD: 52.51 ± 1.73 nkat mg^?1 protein]. Chlorophyll b content was also higher in males than females.     

In situ preparation of polyaniline within neutral,anionic, and cationic superporous cryogel networks as conductive,semi‐interpenetrating polymer network cryogel composite systems

Polyaniline [p(An)], one of the most known conducting polymers, was prepared within superporus nonionic polyacrylamide [p(AAm)], anionic poly(2‐acrylamido‐2‐methyl‐1‐propane sulfonic acid sodium salt) [p(AMPS)], and cationic poly(3‐acrylamidopropyltrimethyl ammonium chloride) [p(APTMACl)] cryogels. After they were synthesized, washed, and dried, the neutral p(AAm), anionic p(AMPS), and cationic p(APTMACl) cryogels were soaked in an ammonium persulfate/aniline solution (1:1.25 ratio) in 1 M hydrochloric acid for the in situ oxidative polymerization of p(An) with the cryogel matrices as templates or reactors. The prepared p(AAm)/p(An), p(AMPS)/p(An), and p(APTMACl)/p(An) semi‐interpenetrating polymer network (semi‐IPN) conductive cryogel composites were characterized with scanning electron microscopy (SEM), Fourier transform infrared spectroscopy, and conductivity analysis. The SEM images revealed that the superporus cryogel networks were almost completely filled with p(An) conductive polymers (CPs). Among the cryogel–CP semi‐IPNs, we found that p(AAm)/p(An) semi‐IPN conductive cryogel composites provided the highest conductivity values of 1.4 × 10^?2 ± 4 × 10^?4 S/cm; this was a 6.4 × 10⁶ fold increase in the conductivity from the values of 2.2 × 10^?9 ± 1 × 10^?10 for p(AAm) cryogels. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 44137.     

Adsorptive removal of anionic and non‐ionic surfactants from aqueous phase using Posidonia oceanica (L.) marine biomass

BACKGROUND: In this study, the capability of low‐cost, renewable and abundant marine biomass Posidonia oceanica (L.) for adsorptive removal of anionic and non‐ionic surfactants from aqueous solutions have been carried out in batch mode. Several experimental key parameters were investigated including exposure time, pH, temperature and initial surfactant concentration. RESULTS: It was found that the highest surfactant adsorption capacities reached at 30 °C were determined as 2.77 mg g^?1 for anionic NaDBS and as 1.81 mg g^?1 for non‐ionic TX‐100, both at pH 2. The biosorption process was revealed as a thermo‐dependent phenomenon. Equilibrium data were well described by the Langmuir isotherm model, suggesting therefore a homogeneous sorption surface with active sites of similar affinities. The thermodynamic constants of the adsorption process (i.e. ΔG°, ΔH° and ΔS°) were respectively evaluated as ? 8.28 kJ mol^?1, 48.07 kJ mol^?1 and ? 42.38 J mol^?1 K^?1 for NaDBS and ? 9.67 kJ mol^?1, 95.13 kJ mol^?1 and ? 174.09 J mol^?1 K^?1 for TX‐100. CONCLUSION: Based on this research, valorization of highly available Posidonia oceanica biomass, as biological adsorbent to remove anionic and non‐ionic surfactants, seems to be a promising technique, since the sorption systems studied were found to be favourable, endothermic and spontaneous. Copyright © 2007 Society of Chemical Industry     

Preparation and characteristic of a sodium alginate/carboxymethylated bacterial cellulose composite with a crosslinking semi‐interpenetrating network

A novel ionic crosslinking sodium alginate (SA)/carboxymethylated bacterial cellulose (CM‐BC) composite with a semi‐interpenetrating polymer network (semi‐IPN) structure was developed in this study. The composite was prepared through the blending of an SA gel with CM‐BC then crosslinking by Ca²⁺ followed by a freeze‐drying process. Scanning electron microscopy showed the composite matrix organized in a three‐dimensional network of CM‐BC interpenetrated against SA molecular chains with a quantity of calcium alginate microspheres upon the surface. The swelling ratios of the composite were enhanced by 183, 198, and 212% with the supplementation of CM‐BC weight fractions of 25, 50, and 75%, respectively; the swelling ratios changed with changing pH. The tensile modulus, tensile strength, and elongation at break of SA were enhanced by 165, 152, and 188%, respectively, with the addition of 50 wt % CM‐BC. This study demonstrated that the semi‐IPN structure dramatically changed the swelling and mechanical properties of the composite, and the semi‐IPN will be a promising candidate for biomedical applications such as wound dressings and skin tissue engineering. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39848.     

Ionic conductivity,dielectric behavior,and HATR–FTIR analysis onto poly(methyl methacrylate)–poly(vinyl chloride) binary solid polymer blend electrolytes

Solid polymer electrolytes comprising blends of poly(vinyl chloride) (PVC) and poly(methyl methacrylate) (PMMA) as host polymers and lithium bis(trifluoromethanesulfonyl) imide (LiTFSI) as dopant salt were prepared by solution‐casting technique. The ionic conductivity and dielectric behavior were investigated by using AC‐impedance spectroscopy in the temperature range of 298–353 K. The highest ionic conductivity of (1.11 ± 0.09)×10^?6 S cm^?1 is obtained at room temperature. The temperature dependence of ionic conductivity plots showed that these polymer blend electrolytes obey Arrhenius behavior. Conductivity–frequency dependence, dielectric relaxation, and dielectric moduli formalism were also further discussed. Apart from that, the structural characteristic of the polymer blend electrolytes was characterized by means of horizontal attenuated total reflectance–Fourier transform infrared (HATR–FTIR) spectroscopy. HATR–FTIR spectra divulged the interaction between PMMA, PVC, and LiTFSI. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Conversion of waste plastics to single-cell protein by means of pyrolysis followed by fermentation

Waste plastics (e.g. polyethylene, polystyrene and polypropylene) have been converted to single-cell protein using pyrolysis followed by fermentation. Conversion efficiencies of plastics to pyrolysate were 75–90% for polyethylene, 10–56% for polystyrene and 40–50% for polypropylene. Unpyrolysed residues were formed with polystyrene (6–14%) and polypropylene (14–30%), but not with polyethylene. Polyvinyl chloride produced hydrogen chloride fumes, together with 33–39% unpyrolysed residue, no fermentable pyrolysis products being formed. Polyethylene pyrolysate was fermented by the yeast, Candida tropicalis. Batch fermentation was carried out at 31°C and pH 5.5 on polyethylene pyrolysate in shaken flasks (100 cm³ culture) and in an aerated fermenter (500 cm³ culture). Maximum growth rate was 0.168 h^?1, cell yield was 0.47 ± 0.02 g g^?1 pyrolysate used (n = 3) and doubling time was 4–5 h, after 72 h growth on 1.0g pyrolysate 100 cm^?3 culture. Continuous culture (dilution rate 0.10 h^?1) gave a dry cell yield of 0.39 g g^?1 pyrolysate utilised. Utilisation of pyrolysate was 49.0% in batch culture and 33.0% in continuous culture. The efficiency of conversion of polyethylene to biomass was 34–42% in batch culture. Emulsification and pristane-solubilisation were studied as a means of dispersing waxy pyrolysates in culture media. Pristane did not support growth whereas the emulsifier [lecithin, Tween 85 and sodium glycocholate (1:2:2 by weight)] could support up to 27% of the growth observed on polyethylene pyrolysate. Although growth would occur without either emulsifier or pristane, use of pristane increased both dry cell yield (g g^?1 pyrolysate used) and pyrolysate utilisation by 1.3 times in flask cultures. Crude protein content of cells cultured on polyethylene pyrolysate was 46.7 ± 2.4% (n = 3) for batch culture cells, and 43.8 ± 0.3% (n = 4) for continuous culture cells. The true protein content of Candida cells was about 17%. The protein had a favourable nutritional quality as judged by in-vitro chemical tests.     

Fast‐swelling oxidized starch phosphate–poly(acrylate/acrylamide/2‐acryloylamino‐2‐methyl‐1‐propanesulfonic acid) superabsorbent composite

A fast‐swelling superabsorbent composite was prepared by solution polymerization of acrylate, acrylamide, 2‐acryloylamino‐2‐methyl‐1‐propanesulfonic acid and oxidized starch phosphate. Ethanol, propyl alcohol, butyl alcohol, and sodium bicarbonate were used as foaming agents to produce fast‐swelling characteristics. The structure of the superabsorbent composite was characterized using Fourier transform infrared spectroscopy (FTIR). The influences of the amount of water, acrylamide, 2‐acryloylamino‐2‐methyl‐1‐propanesulfonic acid, oxidized starch phosphate, initiator, and trihydroxymethyl propane glycidol ether, as well as the neutralization degree of acrylic acid on the equilibrium swelling degree and swelling rate of the superabsorbent composite, were investigated. The equilibrium swelling degree of the superabsorbent composite prepared in a 0.9 wt% NaCl aqueous solution was 52 g g^?1, and the swelling rate reached 0.86 mL g^?1 s^?1. The swelling kinetics was also investigated, and the results indicate that swelling of the superabsorbent composites obeys Schott's pseudo second‐order kinetics model. POLYM. ENG. SCI., 56:1267–1274, 2016. © 2016 Society of Plastics Engineers     

Effects of chemical and thermochemical pretreatments on sunflower oil cake in biochemical methane potential assays

BACKGROUND: The effects of chemical and thermochemical pretreatments on the composition and anaerobic biodegradability of sunflower oil cake were studied to compare these pretreatments and to assess their effectiveness. Four reagents (lime, sodium hydroxide, sulphuric acid, and sodium bicarbonate) at concentrations of 25% (w/w) of dry weight of substrate and 20 g L^?1 substrate concentration were used for the chemical pretreatment for 4 h. The same conditions were used for thermochemical pretreatment with heating at 75°C. After the pretreatments, the solid and liquid fractions were separated and subjected to biochemical methane potential tests. RESULTS: The methane yields of the solid fraction obtained with lime, sodium hydroxide, sulphuric acid and bicarbonate were 130±9, 54±4, 61±6 and 88±7 mL CH₄ g^‐1COD_added, respectively, and after thermochemical pretreatment were 26±2, 84±7, 74±7, and 77±6 mL CH₄ g^‐1COD_added, respectively. The methane yields for liquids were 152±13, 2±0, 0±0, 249±19 mL CH₄ g^‐1COD_added, for the chemical pre‐treatment, respectively, and after the thermochemical pretreatment were 273±13, 58±5, 0±0 and 145±12 mL CH₄ g^‐1COD_added, respectively. CONCLUSION: Only the solid fraction obtained after the chemical pretreatment with lime gave a methane yield higher (130 mL CH₄ g^‐1COD_added) than the obtained for the untreated solid material (114 mL CH₄ g^‐1COD_add). No thermochemical pretreatment enhanced the methane yield of the solid or liquid fractions of the untreated material. © 2012 Society of Chemical Industry     

Development of a superporous hydroxyethyl cellulose‐based hydrogel by anionic surfactant micelle templating with fast swelling and superabsorbent properties

The self‐assembling anionic surfactant, sodium n‐dodecyl sulfonate (SDS) micelles were used as pore‐forming templating for fabricating novel superporous hydroxyethyl cellulose‐grafting‐poly(sodium acrylate)/attapulgite (HEC‐g‐PNaA/APT) hydrogels. The network characteristics, morphologies of the hydrogels and removing of SDS micelles from the final product by washing with ethanol/water (v/v, 7 : 3) procedure were determined by Fourier transform infrared spectroscopy and scanning electron microscopy, as well as by determination of swelling ratio, swelling rate, and stimuli response to salts and pHs. The results showed that the added‐SDS concentration significantly affected the morphologies and pore structure of the hydrogel, and 2 mM SDS facilitates to form a homogeneous and well‐defined pore structure in the gel network to extremely improve the swelling ratio and swelling rate. The 2 mM SDS‐added superporous HEC‐based hydrogel not only had highest equilibrium swelling ratio (Q_eq, 1118, 102 g g^?1 in distilled water and 0.9 wt % NaCl solution), rapid swelling rate (k_is, 5.2840 g g s^?1), also showed multistimulus responses to salts and pHs, which may allow its applications in several areas such as adsorption, separation and biomedical materials. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42027.     

Preparation of polymer electrolytes based on the polymerized imidazolium ionic liquid and their applications in lithium batteries

The polymer electrolytes based on a polymerized ionic liquid (PIL) as polymer host and containing 1,2‐dimethyl‐3‐butylimidazolium bis(trifluoromethanesulfonyl)imide (BMMIM‐TFSI) ionic liquid, lithium TFSI salt, and nanosilica are prepared. The PIL electrolyte presents a high ionic conductivity, and it is 1.07 × 10^?3 S cm^?1 at 60°C, when the BMMIM‐TFSI content reaches 60% (the weight ratio of BMMIM‐TFSI/PIL). Furthermore, the electrolyte exhibits wide electrochemical stability window and good lithium stripping/plating performance. Preliminary battery tests show that Li/LiFePO₄ cells with the PIL electrolytes are capable to deliver above 146 mAh g^?1 at 60°C with very good capacity retention. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40928.     

Enzymatic hydrolysis and fermentation of lime pretreated wheat straw to ethanol

BACKGROUND: The objective of this work is to develop an efficient pretreatment method that can help enzymes break down the complex carbohydrates present in wheat straw to sugars, and to then ferment of all these sugars to ethanol. RESULTS: The yield of sugars from wheat straw (8.6%, w/v) by lime pretreatment (100 mg g^?1 straw, 121 °C, 1 h) and enzymatic hydrolysis (45 °C, pH 5.0, 120 h) using a cocktail of three commercial enzyme preparations (cellulase, β‐glucosidase, and xylanase) at the dose level of 0.15 mL of each enzyme preparation g^?1 straw was 568 ± 13 mg g^?1 (82% yield). The concentration of ethanol from lime pretreated enzyme saccharified wheat straw (78 g) hydrolyzate by recombinant Escherichia coli strain FBR5 at pH 6.5 and 35 °C in 24 h was 22.5 ± 0.6 g L^?1 with a yield of 0.50 g g^?1 available sugars (0.29 g g^?1 straw). The ethanol concentration was 20.6 ± 0.4 g L^?1 with a yield of 0.26 g g^?1 straw in the case of simultaneous saccharification and fermentation by the E. coli strain at pH 6.0 and 35 °C in 72 h. CONCLUSION: The results are important in choosing a suitable pretreatment option for developing bioprocess technologies for conversion of wheat straw to fuel ethanol. Copyright © 2007 Society of Chemical Industry     

Magnesothermic synthesis of disperse molybdenum carbide in sodium carbonate melts

The physicochemical aspects of the synthesis of molybdenum carbide powders through the magnesothermic reduction of molybdenum oxide in sodium carbonate melts are considered. The reduction reactions are thermodynamically characterized. The composition of the ionic melt is shown to influence the phase composition of the products. In sodium carbonate melts Mo₂C is formed, while sodium chloride melts under the same conditions yield molybdenum powders. The product yield reaches 97% with an about 30% excess of the reducing agent relative to the stoichiometry. Minor metal concentrations are within ～2%. The particle sizes of the powders are determined. The specific surface area of molybdenum carbide powders is 5.53 × 10⁵ m^?1; that of molybdenum is 20.19 × 10⁵ m^?1.     

Thermophysical properties of laboratory-prepared corn/wheat dried distillers grains and dried distillers solubles dehydrated with superheated steam and hot air

The objective of this study was to dry–wet distillers grains and centrifuged solubles and to examine the effect of two different drying media, superheated steam and hot air, at different drying temperatures (110, 130, and 160°C), moisture contents (5–30% wb), and percentages of solubles’ presence (0 or 100%) on some thermophysical properties of laboratory-prepared corn/wheat dried distillers co-products, including geometric mean diameter (d_g), particle density (ρ_p), bulk density (ρ_b), bulk porosity (?_b), specific heat (C), effective thermal diffusivity (α_eff), and bulk thermal conductivity (λ_b). The values of d_g of corn/wheat dried distillers co-products ranged from 0.358 ± 0.001 to 0.449 ± 0.001 mm. Experimental values of ρ_p, ρ_b, and ?_b varied from 1171 ± 6 to 1269 ± 3 kg m^?3, from 359 ± 7 to 605 ± 5 kg m^?3, and from 0.54 ± 0.01 to 0.71 ± 0.01 kg m^?3, respectively. The values of α_eff were between 0.58 × 10^?7 and 0.93 × 10^?7 m² s^?1. The calculated values of C ranged from 1887 ± 11 to 2599 ± 19 J kg^?1 K^?1, and the values of λ_b of corn/wheat dried distillers co-products ranged from 0.06 ± 0.01 to 0.09 ± 0.01 W m^?1 K^?1. Multiple linear regression prediction models were developed to predict the changes in d_g, ρ_p, ρ_b, ?_b, C, α_eff, and λ_b of laboratory-prepared corn/wheat dried distillers co-products with different operational factors.     

Superabsorbent polymeric materials III. Effect of initial total monomer concentration on the swelling behavior of crosslinked poly(sodium acrylate) in aqueous salt solution

A series of xerogels based on sodium acrylate (SA) and N,N′-methylene-bisacrylamide (NMBA) were prepared by inverse suspension polymerization. The water absorbency or swelling behaviors for these hydrogels in water or various saline solutions was investigated. Experimental results indicate that the absorbency of poly(SA) in deionized water increases with decrease in the initial total monomer concentration. Results obtained from this study show that the water absorbency, respectively, exhibited a value of 992 g H₂O/g sample and 106 g H₂O/g sample in deionized water and a 0.9 wt % NaCl solution at an initial total monomer concentration of 3.03M. The absorbency in the chloride salt solutions decreases with increase in the ionic strength of the salt. For the same ionic strength of various salt solutions, the swelling amount has the following tendency: Co²⁺ > Ni²⁺ > Cu²⁺ for the higher ionic strength of 6.25 × 10⁻⁴ to 2.0 × 10⁻³M, and Co²⁺, Ni²⁺, and Cu²⁺ approximately have the same swelling amount for the lower ionic strength of < 6.25 × 10⁻⁴M. The influence of monovalent, divalent, and trivalent anions with a common cationic ion (Na⁺) on the water absorbency shows the tendency of monovalent < divalent < trivalent anions for the same ionic strength. © 1997 John Wiley & Sons, Inc. J Appl Polym Sci 64: 2371–2380, 1997