Amine‐cured epoxy/clay nanocomposites. I. Processing and chemical characterization

The processing of nanocomposite materials composed of amine‐cured diglycidyl ether of bisphenol A (DGEBA) reinforced with organomontmorillonite clay is reported. A novel sample preparation scheme was used to process the modified clay in the glassy epoxy network, resulting in nanocomposites where the clay was both exfoliated and intercalated by the epoxy network. The processing scheme involves sonication of the constituent materials in a solvent, followed by solvent extraction to generate a composite with homogeneous dispersions of the nanoclay. Fourier transform infrared spectroscopy (FTIR) and Fourier transform (FT‐)Raman spectroscopy confirmed that the chemical structure of the epoxy network was not affected by the use of solvents in this processing scheme. The glass‐transition temperature, T_g, linearly increased with an increased weight ratio of the nanoclay. The microstructure of clay nanoplatelets in the composites was observed with transmission electron microscopy (TEM), wide‐angle X‐ray scattering (WAXS), and small‐angle X‐ray scattering (SAXS). It was found that the clay nanoplatelets were well‐dispersed, and were intercalated as well as exfoliated. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 4384–4390, 2004     

Synthesis and characterization of polyurethane‐urea clay nanocomposites using montmorillonite modified by oxyethylene–oxypropylene copolymer

Clay organifier with propylene oxide‐capped polyethylene glycol (PEG) with amine end group (jeffamines ED_600–2003) was synthesized through an ion exchange process between sodium cations in montmorillonite (MMT) and ? NH groups in ED_600–2003. The d‐spacing of organoclay was found to be 1.697–1.734 nm compared to 0.96 nm of pristine MMT. Transmission electron microscopy (TEM) was used to determine the molecular dispersion of the clay within ED₆₀₀. Polyurethane‐urea/montmorillonite (PUU‐MMT) nanocomposites were prepared via in situ polymerization from polyethylene glycol (PEG 400) or 1,4 butane diol (1,4 BD), toluene diisocyanate (TDI), jeffamines ED_600–2003, and 1–12 wt% of organoclay. Intercalation of PUU into modified clays was confirmed by X‐ray diffraction (XRD), scanning electron microscopy, and TEM. The barrier properties were significantly reduced; however, the thermal stability was increased in the nanocomposites as compared to the pristine polymer. Nanocomposites exhibited optical clarity and solvent resistance. The mechanical properties and the glass transition temperature of PUU were improved with the addition of organoclay. The incorporation of silicate layers gave rise to a considerable increase in the storage modulus (stiffness), demonstrating the reinforcing effect of clay on the PUU matrix. Copyright © 2009 John Wiley & Sons, Ltd.     

Layered silicate epoxy nanocomposites: formation of the inorganic‐carbonaceous fire protection layer

The layered silicate (LS) modification and processing parameters applied control the morphology of the LS/polymer composites. Here, increasing the surface area of the LS particles by using alternative drying processes increases dispersion towards a more typical nanocomposite morphology, which is a basic requirement for promising flame retardancy. Nevertheless, the morphology at room temperature does not act itself with respect to flame retardancy, but serves as a prerequisite for the formation of an efficient surface protection layer during pyrolysis. The formation of this residue layer was addressed experimentally for the actual pyrolysis region of a burning nanocomposite and thus our results are valid without any assumptions or compromises on the time period, dimension, surrounding atmosphere or temperature. The formation of the inorganic‐carbonaceous residue is influenced by bubbling, migration, reorientation, agglomeration, ablation, and perhaps also delamination induced thermally and by decomposition, whereas true sintering of the inorganic particles was ruled out as an important mechanism. Multiple, quite different mechanisms are relevant during the formation of the residue, and the importance of each mechanism probably differs from one nanocomposite system to another. The main fire protection effect of the surface layer in polymer nanocomposites based on non‐charring or nearly non‐charring polymers is the increase in surface temperature, resulting in a substantial increase in reradiated heat flux (heat shielding). Copyright © 2010 John Wiley & Sons, Ltd.     

Properties of methyltetrahydrophthalic anhydride‐cured epoxy resin modified with MITU

Methylimidazole‐terminated chain‐extended urea (MITU) containing polypropylene oxide spacer was synthesized and employed to modify epoxies composed of a diglycidyl ether of bisphenol‐A (E‐51) and methyltetrahydrophthalic anhydride (MTHPA). The curing behavior, viscoelastic property, impact response, and fracture surface morphology of the curing systems were systematically investigated. Differential scanning calorimeter (DSC) analysis reveals that the curing reactivity of the epoxy system is greatly enhanced with the addition of MITU. From the dynamic mechanical analysis, besides the low‐temperature β relaxation, shoulder at higher temperature side appears for the MITU‐modified systems. Meanwhile, the addition of MITU leads to the increase of loss factor (tan δ) over the temperature range of 0–75°C. Impact tests show that the modifier can be effective in toughening the epoxy resin at relatively low loading, and the scanning electron microscope (SEM) images of the fracture surface for the modified systems display signs of ductility. Copyright © 2008 John Wiley & Sons, Ltd.     

Amine‐cured epoxy/clay nanocomposites. II. The effect of the nanoclay aspect ratio

The thermophysical and mechanical properties of a nanocomposite material composed of amine‐cured diglycidyl ether of bisphenol A (DGEBA) reinforced with organomontmorillonite clay are reported. The storage modulus at 100 °C, which was above the glass‐transition temperature (T_g), increased approximately 350% with the addition of 10 wt % (6.0 vol %) of clay. Below the T_g, the storage modulus at 30 °C increased 50% relative to the value of unfilled epoxy. It was determined that the T_g linearly increased as a function of clay volume percent. The tensile modulus of epoxy at room temperature increased approximately 50% with the addition of 10 wt % of clay. The reinforcing effect of the organoclay nanoplatelets is discussed with respect to the Tandon–Weng and Halpin–Tsai models. A pseudoinclusion model is proposed to describe the behavior of randomly oriented, uniformly dispersed platelets in nanocomposite materials. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 4391–4400, 2004     

Preparation,characterization, thermo‐mechanical,and barrier properties of exfoliated thermoplastic toughened epoxy clay ternary nanocomposites

Ternary nanocomposites are prepared by blending hydroxyl‐terminated poly ether ether ketone having pendant methyl groups (PEEKMOH) with epoxy resin along with Nanolin DK1, followed by curing with 4,4′‐diamino diphenyl sulphone. Differential scanning calorimetry shows a two‐stage cure behavior indicating the catalytic effect of the primary amine and proton, which are generated by the dissociation of organic modifier. Tensile and flexural moduli are increased while tensile strength and glass transition temperature are decreased with increase in clay concentration. Fracture toughness and strain at break are increased by 59 and 62%, respectively, with 1 phr clay loading. Transition electron microscopy and X‐ray diffraction (XRD) analysis reveal exfoliated morphology for the nanocomposites. Scanning electron micrographs show a decrease in both, domain size as well as inter domain distance of the thermoplastic phase with the addition of clay, indicating the occurrence of gelation before phase separation. Analysis of the fracture surface reveals crack path deflection and ductile fracture behavior, confirming that toughness has been improved with the addition of clay and PEEKMOH. Coefficient of thermal expansion (CTE) of the nanocomposites is decreased up to 3 phr clay loading. Oxygen gas permeability is compared with Bharadwaj's and Neilson's models. A marginal improvement in thermal stability is observed with the addition of clay. Copyright © 2009 John Wiley & Sons, Ltd.     

Diglycidyl ether of bisphenol‐A epoxy resin modified using poly(ether ether ketone) with pendent tert‐butyl groups

Bisphenol‐A‐based difunctional epoxy resin was modified with poly(ether ether ketone) with pendent tert‐butyl groups (PEEKT). PEEKT was synthesized by the nucleophilic substitution reaction of 4,4′‐difluoro benzophenone with tert‐butyl hydroquinone in N‐methyl‐2‐pyrrolidone. Blends with various amounts of PEEKT were prepared by melt‐mixing. All the blends were homogeneous in the uncured state. The glass transition temperature of the binary epoxy/PEEKT blends was predicted using several equations. Reaction‐induced phase separation was found to occur upon curing with a diamine 4,4′‐diaminodiphenyl sulfone. The phase morphology of the blends was studied using scanning electron microscopy. From the micrographs, it was found that PEEKT‐rich phase was dispersed in a continuous epoxy matrix. The domain size increased with the amount of PEEKT in the blends. The increase in domain size was due to the coalescence of the domains after phase separation. Dynamic mechanical analysis of the blends gave two peaks corresponding to epoxy‐rich phase and thermoplastic‐rich phase. The tensile strength and modulus of the blends remained close to that of the unmodified resin, while the flexural properties decreased with the addition of PEEKT to epoxy resin. The fracture toughness of the epoxy resin increased with the addition of PEEKT. Investigation of the fracture surfaces revealed evidences for local plastic deformation of the matrix, crack pinning, crack path deflection, and ductile tearing of PEEKT‐rich phase. Thermogravimetric analysis revealed that the initial decomposition temperature of the blends were close to that of the unmodified resin. Finally, the properties of the blends were compared with other modified PEEK/epoxy blends. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2481–2496, 2007     

Functional copolymer/organo‐MMT nanoarchitectures. XIX. Nanofabrication and characterization of poly(MA‐alt‐1‐octadecene)‐g‐PLA layered silicate nanocomposites with nanoporous core–shell morphology

Novel bioengineering functional copolymer‐g‐biopolymer‐based layered silicate nanocomposites were fabricated by catalytic interlamellar bulk graft copolymerization of L‐lactic acid (LA) monomer onto alternating copolymer of maleic anhydride (MA) with 1‐octadecene as a reactive matrix polymer in the presence of preintercalated LA…organo‐MMT clay (reactive ODA‐MMT and non‐reactive DMDA‐MMT) complexes as nanofillers and tin(oct)₂ as a catalyst under vacuum at 80°C. To characterize the functional copolymer layered silicate nanocomposites and understand the mechanism of in situ processing, interfacial interactions and nanostructure formation in these nanosystems, we have utilized a combination of variuous methods such as FT‐IR spectroscopy, X‐ray diffraction (XRD), dynamic mechanical (DMA), thermal (DSC and TGA‐DTG), SEM and TEM morphology. It was found that in situ graft copolymerization occurred through the following steps: (i) esterification of anhydride units of copolymer with LA; (ii) intercalation of LA between silicate galleries; (iii) intercalation of matrix copolymer into silicate layers through in situ amidization of anhydride units with octadecyl amine intercalant; and (iv) interlamellar graft copolymerization via in situ intercalating/exfoliating processing. The main properties and observed micro‐ and nanoporous surface and internal core–shell morphology of the nanocomposites significantly depend on the origin of MMT clays and type of in situ processing (ion exchanging, amidization reaction, strong H‐bonding and self‐organized hydrophobic/hydrophilic interfacial interactions). This developed approach can be applied to a wide range of anhydride‐containing copolymers such as random, alternating and graft copolymers of MA to synthesize new generation of polymer‐g‐biopolymer silicate layered nanocomposites and nanofibers for nanoengineering and nanomedicine applications. Copyright © 2014 John Wiley & Sons, Ltd.     

Morphology and dielectric properties of an epoxy network modified by end‐functionalized liquid polybutadiene

Epoxy resin networks modified with different functionalized liquid polybutadiene were characterized by scanning electron microscopy, atomic force microscopy (AFM), and dielectric thermal analysis techniques. Different morphologies were observed for these different systems, which were attributed to different interaction degrees between the components. Hydroxyl‐terminated polybutadiene (HTPB) and carboxyl‐ terminated polybutadiene (CTPB) resulted in epoxy networks with two‐phase morphology that differed in rubber particle size. The use of isocyanate‐terminated polybutadiene (NCOTPB) resulted in transparent thermoset material, whose rubber domains were in the nanoscale dimension, only detected by the AFM technique. The different morphological aspects in these epoxy systems also affected the dielectric properties. The epoxy–HTPB network exhibited two low temperature relaxation peaks corresponding to two different phases present in the system, whereas the epoxy–CTPB or epoxy–NCOTPB systems, whose rubber particles are well adhered to the epoxy matrix by chemical bonds, displayed only one single low temperature relaxation peak. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 4053–4062, 2004     

Plasticized polylactide/clay nanocomposites. I. The role of filler content and its surface organo‐modification on the physico‐chemical properties

Polylactide (PLA)‐layered silicate nanocomposites plasticized with 20 wt % of poly(ethylene glycol) 1000 were prepared by melt blending. Three kinds of organo‐modified montmorillonites—Cloisite® 20A, Cloisite® 25A, and Cloisite® 30B—were used as fillers at a concentration level varying from 1–10 wt %. Neat PLA and plasticized PLA with the same thermomechanical history were considered for comparison. Nanocomposites based on amorphous PLA were obtained via melt‐quenching. The influence of both plasticization and nanoparticle filling on the physicochemical properties of the nanocomposites were investigated. Characterization of the systems was achieved by size exclusion chromatography (SEC), thermogravimetric analysis (TGA), thermally modulated differential scanning calorimetry (TMDSC), X‐ray diffraction (XRD), and dynamic mechanical analysis (DMTA). SEC revealed a decrease of the molecular weight of the PLA matrix with the filler content. Thermal behavior on heating showed one cold crystallization process in the reference neat PLA sample, while two cold crystallization processes in plasticized PLA and plasticized nanocomposites. The thermal windows of these processes tend to increase with the filler content. The crystalline form of PLA developed upon heating was affected neither by the plasticization nor by the type and content of Cloisite used. It was found that the series of organo‐modified montmorillonites with decreasing affinity to PLA is Cloisite® 30B, Cloisite® 20A, and Cloisite® 25A, respectively. The dynamic mechanical properties were sensitive to the sample composition. Generally, the storage modulus increased with the filler content. Glassy PEG, well dispersed within unfilled PLA matrix, exhibited also a reinforcing effect, since the storage modulus of this sample was higher than for unplasticized reference at temperature region below the glass transition of PEG. Moreover, loss modulus of all plasticized samples revealed an additional maximum ascribed to the glass transition of PEG–rich dispersed phase, indicating partial miscibility of organic components of the systems investigated. The magnitude of this mechanical loss was correlated with the filler content, and to some extent, also with the nanofiller ability to be intercalated by polymer components. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 299–311, 2006     

Synthesis of a caged bicyclic phosphates derived anhydride and its performance as a flame‐retardant curing agent for epoxy resins

A novel curing and flame‐retardant agent (PEPA‐TMAC) was successfully synthesized. The chemical structure was characterized by Fourier transform infrared spectroscopy (FTIR) and nuclear magnetic resonance (NMR). Use of PEPA‐TMAC as part of the curing agent in combination with another anhydride for a commercial epoxy resin (EP) was studied. Results of differential scanning calorimetry (DSC) indicated that PEPA‐TMAC was an effective curing agent for EP. The dynamic mechanical analysis (DMA) results showed that the glass transition temperature (T_g) and cross‐linking density (V_e) of EP composites exhibited an increase trend with the addition of PEPA‐TMAC. The limiting oxygen index (LOI) value of EP composites reached 26.9%, and the cone calorimeter results indicated that peak heat release rate (PHRR), total heat release (THR), smoke produce rate (SPR), and total smoke produce (TSP) remarkably decreased with increasing PEPA‐TMAC content. TGA data showed that the addition of PEPA‐TMAC greatly increased the amount of residual char during combustion. The morphology of the residual char was studied by SEM and showed that the addition of PEPA‐TMAC greatly increased the stability of EP composites. The thermogravimetric analysis (TGA), energy‐dispersive X‐ray spectroscopy (EDS), and FTIR results revealed the flame‐retardant mechanism that PEPA‐TMAC can promote the formation of charred layers with the phospho‐carbonaceous complexes in the condensed phase during burning of EP composites.     

Curing behavior of epoxy resin initiated by S‐alkylsulfonium salts of aromatic sulfides as thermal latent cationic initiators

The curing behavior of bisphenol‐A‐type epoxide oligomers (Ep) was evaluated by differential scanning calorimetry in the presence of S‐alkylsulfonium salts of dibenzothiophene, phenoxathiin, thianthrene, thioanisole, and tetrahydrothiophene as thermal latent initiators. These initiators dissolved homogeneously in Ep, except for 2,8‐dimethoxy‐5‐methyldibenzothiophenium tetrafluoroborate, and the curing reaction of the resulting mixtures occurred on heating, except for S‐methyltetrahydrothiophenium tetrafluoroborate. The initiation activity of these salts was controlled by the character of the substituents on the benzene ring, the leaving sulfide group, and the S‐alkyl group. Presumably, the electron density on the sulfide moieties and the stability of the carbocation released from the sulfonium salts affected the initiating temperature. A good correlation was obtained between the initiating temperature and the electron density of the sulfur atom of the corresponding sulfides, estimated from ab initio molecular orbital calculations in which the initiating temperature became higher as the electron density of the sulfur atom increased. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 868–871, 2001     

Thermal and dynamic mechanical properties of epoxy resin/poly(urethane‐imide)/polyhedral oligomeric silsesquioxane nanocomposites

Linear isocyanate‐terminated poly(urethane‐imide) (PUI) with combination of the advantages of polyurethane and polyimide was directly synthesized by the reaction between polyurethane prepolymer and pyromellitic dianhydride (PMDA). Then octaaminophenyl polyhedral oligomeric silsesquioxane (OapPOSS) and PUI were incorporated into the epoxy resin (EP) to prepare a series of EP/PUI/POSS organic–inorganic nanocomposites for the purpose of simultaneously improving the heat resistance and toughness of the epoxy resin. Their thermal degradation behavior, dynamic mechanical properties, and morphology were studied with thermal gravimetric analysis (TGA), dynamic mechanical analysis (DMA), and transmission electron microscope (TEM). The results showed that the thermal stability and mechanical modulus was greatly improved with the addition of PUI and POSS. Moreover, the EP/PUI/POSS nanocomposites had lower glass transition temperatures. The TEM results revealed that POSS molecules could self assemble into strip domain which could switch to uniform dispersion with increasing the content of POSS. All the results could be ascribed to synergistic effect of PUI and POSS on the epoxy resin matrix. Copyright © 2010 John Wiley & Sons, Ltd.     

Extruder‐made TPO nanocomposites. I. Effect of maleated polypropylene and organoclay ratio on the morphology and mechanical properties

PP/PP‐g‐MA/MMT/EOR blend nanocomposites were prepared in a twin‐screw extruder at fixed 30 wt % elastomer and 0 to 7 wt % MMT content. Elastomer particle size and shape in the presence of MMT were evaluated at various PP‐g‐MA/organoclay masterbatch ratios of 0, 0.5, 1.0, and 1.5. The organoclay dispersion facilitated by maleated polypropylene serves to reduce the size of the elastomer dispersed phase particles and facilitates toughening of these blend nanocomposites. The rheological data analysis using modified Carreau‐Yasuda model showed maximum yield stress in extruder‐made nanocomposites compared with nanocomposites of reactor‐made TPO. Increasing either MMT content or the PP‐g‐MA/organoclay ratio can drive the elastomer particle size below the critical particle size below which toughness is dramatically increased. The ductile‐brittle transition shift toward lower MMT content as the PP‐g‐MA/organoclay ratio is increased. The D‐B transition temperature also decreased with increased MMT content and masterbatch ratio. Elastomer particle sizes below ～1.0 μm did not lead to further decrease in the D‐B transition temperature. The tensile modulus, yield strength, and elongation at yield improved with increasing MMT content and masterbatch ratio while elongation at break was reduced. The modified Mori‐Tanaka model showed better fit to experimental modulus when the effect of MMT and elastomer are considered individually. Overall, extruder‐made nanocomposites showed balanced properties of PP/PP‐g‐MA/MMT/EOR blend nanocomposites compared with nanocomposites of reactor‐made TPO. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012