Preparation and Study of Thermal Decomposition Mechanism of Zn(Thr)(AcO)_2·2H_2O

Introduction -Amino acids as additive have a wide application in medicines, foodstuff and cosmetics.1-3 The synthetic methods of amino acid have been reviewed.4,5 The solu-bility property of Zn(AcO)2-Thr-H2O (Thr=Threonine) system at 298.15 K has been investigated by the semimicro-phase equilibrium method, in which the phase region of the complex did not exist.6 The prepara-tion of Zn(Thr)SO4H2O was reported in Ref. 7∶3 times volume of acetone relative to that of water was added into t…     

Crystal Structure of the Mixed‐Valent Basic Mercury Nitrate HgI2(NO3)2·HgII(OH)(NO3)·HgII(NO3)2·4HgIIO [= Hg8O4(OH)(NO3)5]

Light‐yellow single crystals of the mixed‐valent mercury‐rich basic nitrate Hg₈O₄(OH)(NO₃)₅ were obtained as a by‐product at 85 °C from a melt consisting of stoichiometric amounts of (Hg^I₂)(NO₃)₂·2H₂O and Hg^II(OH)(NO₃). The title compound, represented by the more detailed formula Hg^I₂(NO₃)₂·Hg^II(OH)(NO₃)·Hg^II(NO₃)₂·4Hg^IIO, exhibits a new structure type (monoclinic, C2/c, Z = 4, a = 6.7708(7), b = 11.6692(11), c = 24.492(2) Å, β = 96.851(2)°, 2920 structure factors, 178 parameters, R1[F² > 2σ(F²)] = 0.0316) and is made up of almost linear [O‐Hg^II‐O] and [O‐Hg^I‐Hg^I‐O] building blocks with typical Hg^II‐O distances around 2.06Å and a Hg^I‐O distance of 2.13Å. The Hg₂²⁺ dumbbell exhibits a characteristic Hg‐Hg distance of 2.5079(7) Å. The different types of mercury‐oxygen units form a complex three‐dimensional network exhibiting large cavities which are occupied by the nitrate groups. The NO₃^? anions show only weak interactions between the nitrate oxygen atoms and the mercury atoms which are at distances > 2.6Å from one another. One of the three crystallographically independent nitrate groups is disordered.     

Structural Polymorphism and Thin Film Transistor Behavior in the Fullerene Framework Molecule 5,6;11,12‐di‐o‐Phenylenetetracene

The molecular structure of the hydrocarbon 5,6;11,12‐di‐o‐phenylenetetracene (DOPT), its material characterization and evaluation of electronic properties is reported for the first time. A single‐crystal X‐ray study reveals two different motifs of intramolecular overlap with herringbone‐type arrangement displaying either face‐to‐edge or co‐facial face‐to‐face packing depicting intensive π–π interactions. Density functional theory (DFT) calculations underpin that a favorable electronic transport mechanism occurs by a charge hopping process due to a π‐bond overlap in the DOPT polymorph with co‐facial arene orientation. The performance of polycrystalline DOPT films as active organic semiconducting layer in a state‐of‐the‐art organic field effect transistor (OFET) device was evaluated and proves to be film thickness dependent. For 40 nm layer thickness it displays a saturation hole mobility (μ_hole) of up to 0.01 cm² V^?1 s^?1 and an on/off‐ratio (I_on/I_off) of 1.5×10³.     

An unusual conformation of gabapentin (Gpn) in Pyr‐Gpn‐NH‐NH‐Pyr stabilized by weak interactions

The crystal structure of N‐[(1‐{2‐oxo‐2‐[2‐(pyrazin‐2‐ylcarbonyl)hydrazin‐1‐yl]ethyl}cyclohexyl)methyl]pyrazine‐2‐carboxamide monohydrate (Pyr‐Gpn‐NN‐NH‐Pyr·H₂O), C₁₉H₂₃N₇O₃·H₂O, reveals an unusual trans–gauche (tg⁻) conformation for the gabapentin (Gpn) residue around the C^γ—C^β (θ₁) and C^β—C^α (θ₂) bonds. The molecular conformation is stabilized by intramolecular N—H...N hydrogen bonds and weak C—H...O interactions. The packing of the molecules in the crystal lattice shows a network of strong N—H...O and O—H...O hydrogen bonds together with weak C—H...O and π–π inteactions.     

Crystal Structure of Tetrakis (phenacetin) Dihydrogentetraiodide Dihydrate {[H5C2OC6H4N (H)C(CH3)O]4·H2I4·2H2O}

(Phenacetin)₄·₂I₄·2H₂O is triclinic, a = 13.641 (7), b = 12.807 (6), c = 7.201 (3) Å, α = 99.8 (4), b? = 86.5 (4), γ = 104.0 (5)°, P1 , Z = 1. The ordered crystal structure has been refined to R_F = 0.050, using 4173 independent reflections measured on a four-circle diffractometer with MoKa (graphite monochromator) radiation. The crystals are composed of alternating positively and negatively charged slices; each positive slice contains a double layer of stacks of hemi-protonated phenacetin molecules which are H-bonded through their carbonyl groups (d(O - - - O) = 2.432 (4) Å) while each negative slice contains a single layer of I^2?₄-ions linked in chains along [100] through H-bonds to pairs of water molecules. The axes of the phenacetin stacks are parallel to the planes of the (I^2?₄·2H₂O)-layers. The I^2?₄-ion is centro-symmetric and can be approximately represented as I^?- - - I–I- - - I^? (d(I^? - - - I) = 3.404 (1) Å; d(I–I) = 2.774 (1) Å). The compound is a pseudo-type A basic salt.     

Single crystals of the filled Ti2N‐type η‐phase Ti3Zn3Ox (x = 1.07 and 1.23) prepared using a Bi flux

Single crystals of the filled Ti₂Ni‐type Ti₃Zn₃O_x η‐phase (cubic, space group Fdm) having {111} facets were obtained by heating Ti, Zn and ZnO with a Bi flux. The lattice parameter of a single crystal prepared at 800°C was 11.4990 (2) Å, which is close to that of Ti₃Zn₃O_∼0.5 (a = 11.502 Å), as reported by Rogl & Nowotny [Monatsh. Chem. (1977), 108 , 1167–1180]. The occupancies of the O1 (16c) and O2 (8a) sites were 1 and 0.071 (12), respectively, and the composition of the crystal was determined to be Ti₃Zn₃O_1.04. A single crystal from the sample prepared at 650°C had the same structure type, with a lattice parameter of 11.5286 (2) Å. However, O atoms were situated at a new 32e site in addition to the original 16c and 8a sites, and the Zn‐atom positions were split in accordance with the new O‐atom site. The chemical formula Ti₃Zn₃O_1.27 determined by X‐ray diffraction occupancy refinement agreed with the chemical composition obtained for the cross section of the single crystal determined with an electron probe microanalyzer.     

SET–LRP of N‐isopropylacrylamide in the presence of chain transfer agent

In this study, single electron transfer‐living radical polymerization (SET–LRP) of N‐isopropylacrylamide (NIPAM) in the presence of 2‐mercaptoethylamine chain transfer agent (CTA) was carried out by Cu(0) generated in situ from the disproportionation of CuBr/2,2′‐bipyridine (2,2′‐bpy) in N,N‐dimethylformamide (DMF) at 90 °C. Analysis of polymerization kinetics in the presence of CTA showed that the premature termination of growing polymer chains leads to retardation. The apparent rate constant of polymerization (k) decreased from 4.49 × 10^?4 to 2.59 × 10^?4 min^?1 with increasing CTA concentration. The initiator efficiency (I_eff) and the chain transfer constant (C_s) were found to be 0.524 and 0.286, respectively. The molecular weights of poly(N‐isopropylacrylamide) [poly(NIPAM)] produced were significantly higher than the predicted values, and the polydispersities were less than 1.22. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Complexes of Crown Ether‐Containing N‐Phosphorylated Thioamides and Thioureas with CoII,ZnII and PdII Cations

The reaction of the potassium salts of N‐phosphorylated thioureas [4′‐benzo‐15‐crown‐5]NHC(S)NHP(Y)(OiPr)₂ (Y = S, HL^I ; Y = O, HL^II ) with Zn^II and Co^II cations in aqueous EtOH leads to complexes of formulae Zn(L^I,II‐S,Y)₂ (Y = S, 1 ; Y = O, 2 ) and Co(L^I‐S,S′)₂ ( 3 ), while interaction of the potassium salt of N‐phosphorylated thioamide [4′‐benzo‐15‐crown‐5]C(S)NHP(O)(OiPr)₂ ( HL^III ) with Zn^II in the same conditions leads to the complex Zn(HL^III)(L^III‐S,O)₂ ( 4 ). The reaction of the potassium salt of crown ether‐containing N‐phosphorylated bis‐thiourea N,N′‐[C(S)NHP(O)(OiPr)₂]₂‐1,10‐diaza‐18‐crown‐6 ( H₂L ) with Co^II, Zn^II and Pd^II cations in anhydrous CH₃OH leads to complexes M₂(L‐O,S)₂ (M = Co, 5 ; Zn, 6 ; M = Pd, 7 ). Thioamide HL^III was investigated by single‐crystal X‐ray diffraction.     

Supramolecular structures of bis‐thionooxalamic acid esters derived from (±)‐cyclohexane‐1,2‐diamine and (±)‐1,2‐diphenylethylenediamine

The bis‐thionooxalamic acid esters trans‐(±)‐diethyl N,N′‐(cyclohexane‐1,2‐diyl)bis(2‐thiooxamate), C₁₄H₂₂N₂O₄S₂, and (±)‐N,N′‐diethyl (1,2‐diphenylethane‐1,2‐diyl)bis(2‐thiooxamate), C₂₂H₂₄N₂O₄S₂, both consist of conformationally flexible molecules which adopt similar conformations with approximate C₂ rotational symmetry. The thioamide and ester parts of the thiooxamate group are significantly twisted along the central C—C bond, with the S=C—C=O torsion angles in the range 30.94 (19)–44.77 (19)°. The twisted s‐cis conformation of the thionooxamide groups facilitates assembly of molecules into a one‐dimensional polymeric structure via intermolecular three‐center C=S...NH...O=C hydrogen bonds and C—H...O interactions formed between molecules of the opposite chirality.     

Fluorenyl Zinc Phosphonate Zn(H2O)PO3–C13H9·H2O: Hybrid Columnar Structure with Strong C–H···π Interactions

A new zinc phosphonate Zn(H₂O)PO₃–C₁₃H₉ · H₂O with a columnar structure was synthesized in hydrothermal conditions. This compound crystallizes in space group P2₁/c [a = 15.832(4) Å, b = 5.1915(10) Å, c = 17.519(4) Å and β = 114.479(6)°]. Its inorganic framework consists of isolated chains of corner‐sharing ZnO₃(H₂O) and PO₃C tetrahedra. These chains are linked to fluorene cycles, forming hybrid columns, interconnected through C–H ··· π bonds. The photoluminescence properties of this hybrid material show that its emission bands are red shifted with respect to those of the mother phosphonic acid. This effect is explained on the basis of the structural constraints imposed by the inorganic Zn‐phosphonate chains.     

A μ4‐oxide‐containing a dimeric variant of a sodium dialkyl(amido)zincate reagent

Post‐metallation derivatives of the sodium dialkyl(amido)zincate reagent (TMEDA)Na(μ‐TMP)Zn(^tBu)₂ (TMEDA is N,N,N′,N′‐tetramethylethylenediamine and TMP is 2,2,6,6‐tetramethylpiperidide) have been of structural interest due to the insight they give into aromatic metallation mechanisms. Here, the aromatic substrate is formally replaced with [ZnO]₂ to give tetra‐tert‐butyldi‐μ₄‐oxido‐bis(tetramethylethylenediamine‐κ²N,N′)bis(μ₂‐2,2,6,6‐tetramethylpiperidin‐1‐ido‐κ²N:N)disodiumtetrazinc hexane 0.59‐solvate, [Na₂Zn₄(C₄H₉)₄(C₉H₁₈N)₂O₂(C₆H₁₆N₂)₂]·0.59C₆H₁₄. The crystallographically centrosymmetric complex retains many of the structural features of its parent monomer but has an unusual dimeric structure, with a central planar Zn–O–Zn–O ring joined to two orthogonal near‐planar Zn–O–Na–N rings through the distorted tetrahedral geometries of the oxide ions.     

Three anilides of 2,2′‐thiodibenzoic acid

The structures of N,N′‐bis(2‐methylphenyl)‐2,2′‐thiodibenzamide, C₂₈H₂₄N₂O₂S, (Ia), N,N′‐bis(2‐ethylphenyl)‐2,2′‐thiodibenzamide, C₃₀H₂₈N₂O₂S, (Ib), and N,N′‐bis(2‐bromophenyl)‐2,2′‐thiodibenzamide, C₂₆H₁₈Br₂N₂O₂S, (Ic), are compared with each other. For the 19 atoms of the consistent thiodibenzamide core, the r.m.s. deviations of the molecules in pairs are 0.29, 0.90 and 0.80 Å for (Ia)/(Ib), (Ia)/(Ic) and (Ib)/(Ic), respectively. The conformations of the central parts of molecules (Ia) and (Ib) are similar due to an intramolecular N—H...O hydrogen‐bonding interaction. The molecules of (Ia) are further linked into infinite chains along the c axis by intermolecular N—H...O interactions, whereas the molecules of (Ib) are linked into chains along b by an intermolecular N—H...π contact. The conformation of (Ic) is quite different from those of (Ia) and (Ib), since there is no intramolecular N—H...O hydrogen bond, but instead there is a possible intramolecular N—H...Br hydrogen bond. The molecules are linked into chains along c by intermolecular N—H...O hydrogen bonds.     

Methyl 4‐O‐β‐D‐mannopyranosyl β‐D‐xylopyranoside

Methyl β‐D‐mannopyranosyl‐(1→4)‐β‐D‐xylopyranoside, C₁₂H₂₂O₁₀, (I), crystallizes as colorless needles from water, with two crystallographically independent molecules, (IA) and (IB), comprising the asymmetric unit. The internal glycosidic linkage conformation in molecule (IA) is characterized by a ϕ′ torsion angle (O5′_Man—C1′_Man—O1′_Man—C4_Xyl; Man is mannose and Xyl is xylose) of −88.38 (17)° and a ψ′ torsion angle (C1′_Man—O1′_Man—C4_Xyl—C5_Xyl) of −149.22 (15)°, whereas the corresponding torsion angles in molecule (IB) are −89.82 (17) and −159.98 (14)°, respectively. Ring atom numbering conforms to the convention in which C1 denotes the anomeric C atom, and C5 and C6 denote the hydroxymethyl (–CH₂OH) C atom in the β‐Xylp and β‐Manp residues, respectively. By comparison, the internal glycosidic linkage in the major disorder component of the structurally related disaccharide, methyl β‐D‐galactopyranosyl‐(1→4)‐β‐D‐xylopyranoside), (II) [Zhang, Oliver & Serriani (2012). Acta Cryst. C 68 , o7–o11], is characterized by ϕ′ = −85.7 (6)° and ψ′ = −141.6 (8)°. Inter‐residue hydrogen bonding is observed between atoms O3_Xyl and O5′_Man in both (IA) and (IB) [O3_Xyl...O5′_Man internuclear distances = 2.7268 (16) and 2.6920 (17) Å, respectively], analogous to the inter‐residue hydrogen bond detected between atoms O3_Xyl and O5′_Gal in (II). Exocyclic hydroxymethyl group conformation in the β‐Manp residue of (IA) is gauche–gauche, whereas that in the β‐Manp residue of (IB) is gauche–trans.     

Two polymorphs of 5‐cyclohexyl‐5‐ethylbarbituric acid and their packing relationships with other barbiturates

Polymorph (Ia) (m.p. 474 K) of the title compound, C₁₂H₁₈N₂O₃, displays an N—H...O=C hydrogen‐bonded layer structure which contains R₆⁶(28) rings connecting six molecules, as well as R₂²(8) rings linking two molecules. The 3‐connected hydrogen‐bonded net resulting from these interactions has the hcb topology. Form (Ib) (m.p. 471 K) displays N—H...O=C hydrogen‐bonded looped chains in which neighbouring molecules are linked to one another by two different R₂²(8) rings. Polymorph (Ia) is isostructural with the previously reported form II of 5‐(2‐bromoallyl)‐5‐isopropylbarbituric acid (noctal) and polymorph (Ib) is isostructural with the known crystal structures of four other barbiturates.     

Two polymorphs and the diethylammonium salt of the barbiturate eldoral

Polymorph (Ia) of eldoral [5‐ethyl‐5‐(piperidin‐1‐yl)barbituric acid or 5‐ethyl‐5‐(piperidin‐1‐yl)‐1,3‐diazinane‐2,4,6‐trione], C₁₁H₁₇N₃O₃, displays a hydrogen‐bonded layer structure parallel to (100). The piperidine N atom and the barbiturate carbonyl group in the 2‐position are utilized in N—H...N and N—H...O=C hydrogen bonds, respectively. The structure of polymorph (Ib) contains pseudosymmetry elements. The two independent molecules of (Ib) are connected via N—H...O=C(4/6‐position) and N—H...N(piperidine) hydrogen bonds to give a chain structure in the [100] direction. The hydrogen‐bonded layers, parallel to (010), formed in the salt diethylammonium 5‐ethyl‐5‐(piperidin‐1‐yl)barbiturate [or diethylammonium 5‐ethyl‐2,4,6‐trioxo‐5‐(piperidin‐1‐yl)‐1,3‐diazinan‐1‐ide], C₄H₁₂N⁺·C₁₁H₁₆N₃O₃⁻, (II), closely resemble the corresponding hydrogen‐bonded structure in polymorph (Ia). Like many other 5,5‐disubstituted derivatives of barbituric acid, polymorphs (Ia) and (Ib) contain the R₂²(8) N—H...O=C hydrogen‐bond motif. However, the overall hydrogen‐bonded chain and layer structures of (Ia) and (Ib) are unique because of the involvement of the hydrogen‐bond acceptor function in the piperidine group.     

Ab initio study of the OH + CH2O reaction: The effect of the OH··OCH2 complex on the H‐abstraction kinetics

Kinetics for the reaction of OH radical with CH₂O has been studied by single‐point calculations at the CCSD(T)/6‐311+G(3df, 2p) level based on the geometries optimized at the B3LYP/6‐311+G(3df, 2p) and CCSD/6‐311++G(d,p) levels. The rate constant for the reaction has been computed in the temperature range 200–3000 K by variational transition state theory including the significant effect of the multiple reflections above the OH··OCH₂ complex. The predicted results can be represented by the expressions k₁ = 2.45 × 10^‐21 T^2.98 exp (1750/T) cm³ mol^?1 s^?1 (200–400 K) and 3.22 × 10^‐18 T^2.11 exp(849/T) cm³ mol^?1 s^?1 (400–3000 K) for the H‐abstraction process and k₂ = 1.05 × 10^‐17 T^1.63 exp(?2156/T) cm³ mol^?1 s^?1 in the temperature range of 200–3000 K for the HO‐addition process producing the OCH₂OH radical. The predicted total rate constants (k₁ + k₂) can reproduce closely the recommended kinetic data for OH + CH₂O over the entire range of temperature studied. © 2006 Wiley Periodicals, Inc. Int J Chem Kinet 38: 322–326, 2006     

Two isomorphous benzene­sulfon­amide crystal structures determined by intermolecular C—H⃛O,C—H⃛π and C—H⃛Cl interactions

The title compounds, N‐[5‐(4‐chloro­phenyl)­furan‐2‐yl­methyl]‐4‐methyl‐N‐(prop‐2‐ynyl)­benzene­sulfon­amide, (Ia), and N‐[5‐(2‐chloro­phenyl)­furan‐2‐yl­methyl]‐4‐methyl‐N‐(prop‐2‐ynyl)­benzene­sulfon­amide, (Ib), both C₂₁H₁₈ClNO₃S, have isomorphous crystal structures. The crystal packing is mainly determined by intermolecular C—H?O and C—H?π interactions. These interactions are very similar in (Ia) and (Ib). Additional intermolecular C—H?Cl interactions appear less important and are different in (Ia) and (Ib). The different positions of the Cl atoms result in small variations of the crystal packing of the two compounds.     

Structure and Magnetic Properties of a Novel Two‐Dimensional Complex from 1, 3, 5‐Benzenetricarboxylate and Neodymium(III) — {[Nd(1, 3, 5‐benzenetricarboxylate)(H2O)4] · H2O}n

A unique neodymium(III) complex, {[Nd(BTC)(H₂O)₄] · H₂O}_n (BTC = 1, 3, 5‐benzenetricarboxylate), was obtained from the reaction between Nd(ClO₄)₃ · xH₂O and Na₃BTC. Coordination bonds, hydrogen bonds, and π‐π stacking form a supramolecular structure with a novel, two‐dimensional framework. The temperature‐dependent magnetic susceptibilities were analyzed by the Curie‐Weiss law; the following values were found C = 1.32, θ = —18.3 K, respectively.     

Novel and Highly Effective Method for the Trimethylsilylation of Alcohols and Phenols with Hexamethyldisilazane (HMDS), Catalyzed by I2 Generated in situ Using Fe(NO3)3⋅9 H2O/NaI under Heterogeneous and Neutral Conditions

Structurally diverse alcohols and phenols were trimethylsilylated in a clean and efficient reaction with hexamethyldisilazane (HMDS) based on the use of I₂ generated in situ from Fe(NO₃)₃?9 H₂O/NaI. The reaction occurs very rapid in good‐to‐high yield in CH₂Cl₂ at room temperature, and the use of toxic and corrosive molecular I₂ is avoided.