Nitroxide-mediated styrene polymerization initiated by an oxoaminium chloride

An oxoaminium chloride that is prepared by reacting 2,2,6,6-tetramethylpiperidinyl-1-oxy (TEMPO) with chlorine in carbon tetrachloride initiates radical polymerization of styrene at 120°C. In the early stages of polymerization, a monomeric adduct, 2,2,6,6-tetramethyl-1-(2-chloro-1-phenylethoxy)piperidine, is formed. Thereafter, styrene polymerization exhibiting the characteristics of living polymerization proceeds. High molecular weight polymers with relatively narrow molecular weight distributions are obtained by this polymerization. ¹H-NMR spectra of the polymers reveal that a chlorine atom and a TEMPO group are present at the α- and ω-termini, respectively. The monomeric adduct was prepared by heating the oxoaminium chloride and styrene in carbon tetrachloride at 65–70°C, and was characterized by ¹H- and ¹³C-NMR spectroscopy. It was found to be suitable as an initiator for nitroxide-mediated radical polymerization of styrene to make polymers with chlorine on the chain end. © 1998 John Wiley & Sons, Inc. J. Polym. Sci. A Polym. Chem. 36: 2555–2561, 1998     

Super impact strength of blends prepared from regular HIPS and poly(butyl acrylate)‐block‐poly(styrene) obtained by RAFT polymerization

S‐allyl‐4‐methyldithiobenzoate was synthesized and used as a chain transfer agent for the RAFT polymerization of butyl acrylate to produce a functionalized acrylic rubber. A solution of 8 wt% of this functionalized rubber was prepared in styrene and polymerized to generate a material called acrylic rubber‐modified polystyrene (AMP) constituted by well‐dispersed particles of poly(butyl acrylate)‐block‐poly(styrene) into a polystyrene matrix. Impact strength of injection‐molded samples of AMP was measured and compared with the general purpose polystyrene (GPPS) and the high impact polystyrene (HIPS). AMP itself showed an impact strength value similar to GPPS; however, when AMP was blended with conventional HIPS, the resulting material exhibited an improvement of 76–91% as compared to HIPS by itself, without affecting negatively tensile properties. Transmission electron microscopy analysis revealed both kinds of dispersed phases, i.e. the typical salami particles of polybutadiene coming from HIPS (size: 0.5–2 µ) and small particles from poly(butyl acrylate)‐block‐poly(styrene) (size: ～50 nm). We clearly showed that such a bimodality of the particle size distribution caused the positive synergistic effect on impact strength. Copyright © 2011 John Wiley & Sons, Ltd.     

Synthesis of poly(4‐hydroxystyrene)‐based block copolymers containing acid‐sensitive blocks by living anionic polymerization

Living anionic polymerization of an acetal protected 4‐hydroxystyrene monomer, (4‐(2‐tetrahydropyranyloxy)styrene) (OTHPSt), and the chain extension of the poly(OTHPSt) anion with a variety of monomers including styrene, 4‐tert‐butylstyrene, methacryloyl polyhedral oligomeric silsesquioxane (MAPOSS) and hexamethylcyclotrisiloxane is demonstrated. The P(OTHPSt) homopolymer has a glass transition temperature well above room temperature, which facilitates handling and purification of the protected poly(4‐hydroxystyrene) (PHS). The resulting diblock copolymers have narrow dispersities <1.05. Chemoselective mild deprotection conditions for the P(OTHPSt) block were identified to prevent simultaneous degradation of the MAPOSS or dimethylsiloxane (DMS) block, thus allowing for the first reported synthesis of P(HS‐b‐DMS) and P(HS‐b‐MAPOSS). © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1458–1468     

Living free‐radical polymerization of styrene under a constant source of γ radiation

Living polymerization of styrene was observed using γ radiation as a source of initiation and 1‐phenylethyl phenyldithioacetate as a reversible addition–fragmentation chain transfer (RAFT) agent. The γ radiation had little or no detrimental effect on the RAFT agent, with the molecular weight of the polymer increasing linearly with conversion (up to the maximum measured conversions of 30%). The polymerization had kinetics (polym.) consistent with those of a living polymerization (first order in monomer) and proportional to the square root of the radiation‐dose rate. This initiation technique may facilitate the grafting of narrow polydispersity, well‐defined polymers onto existing polymer surfaces as well as allow a wealth of kinetic experiments using the constant radical flux generated by γ radiation. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 19–25, 2002     

Nonaqueous dispersion polymerization of styrene in methanol with the ionomer block copolymer poly[(4‐methylstyrene)‐co‐(4‐vinyltriethylbenzyl ammonium bromide)]‐b‐polyisobutene as a stabilizer

The nonaqueous dispersion polymerization of styrene in methanol with poly[(4‐methylstyrene)‐co‐(4‐vinyltriethylbenzyl ammonium bromide)]‐b‐polyisobutene as a stabilizer was investigated. There was no observable inducing period or autoacceleration in the polymerization process. The conversion increased almost linearly with the polymerization time as high as 80%. The average sizes of the obtained polystyrene particles increased, and the size distributions of the polystyrene particles tended to become narrower, with increasing conversion. The mechanism of the dispersion polymerization in the presence of polyisobutene‐b‐poly[(4‐methylstyrene)‐co‐(4‐vinyltriethylbenzyl ammonium bromide)] was nucleation/growth. When the stabilizer/monomer ratio (w/w) was greater than 2.0%, the polystyrene dispersion was stable, and there was no observable polymer particle coagulation taking place during the whole polymerization process. The average diameter of the polymer particles can be mediated through changes in the polymerization conversion, monomer, and stabilizer. Nearly monodispersed polystyrene particles with average diameters of approximately 0.45–2.21 μm were obtained under optimal conditions. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2678–2685, 2004     

Grafting of polyamide 6 by the anionic polymerization of ε‐caprolactam from an isocyanate bearing polystyrene backbone

The grafting of polyamide 6 (PA6) onto polystyrene (PS) can rely on the use of a copolymer of styrene (St) and 3‐isopropenyl‐α, α‐dimethylbenzene isocyanate (TMI), PS‐co‐TMI, to activate the polymerization of ε‐caprolactam (CL) in the presence of sodium ε‐caprolactam (NaCL) as an anionic catalyst. This article is aimed at answering the following key questions. First, do all the isocyanate moieties of the PS‐co‐TMI participate in the activation of the polymerization of CL? Second, what are the composition of the resulting polymer product and the structure of the resulting graft copolymer? The results show that the isocyanate moieties had all participated in the activation of the polymerization, implying that each isocyanate moiety has led to the formation of a PA6 graft. The as‐polymerized product was composed of a pure PS‐g‐PA6 graft copolymer, homo‐PA6, and unreacted CL. Moreover, when the composition of a PS‐co‐TMI/CL/NaCL system was fixed, the mass ratio between the PA6 grafts and PS backbone of the pure PS‐g‐PA6 graft copolymer was almost a constant and was almost independent of its molar mass. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4766–4776, 2008     

Living cationic polymerization of 2‐adamantyl vinyl ether

Living cationic polymerization of 2‐adamantyl vinyl ether (2‐vinyloxytricyclo[3.3.1.1]^3,7decane; 2‐AdVE) was achieved with the CH₃CH(OiBu)OCOCH₃/ethylaluminum sesquichloride/ethyl acetate [CH₃CH(OiBu)OCOCH₃/Et_1.5AlCl_1.5/CH₃COOEt] initiating system in toluene at 0 °C. The number‐average molecular weights (M_n's) of the obtained poly(2‐AdVE)s increased in direct proportion to monomer conversion and produced the polymers with narrow molecular weight distributions (MWDs) (M_w/M_n = ～1.1). When a second monomer feed was added to the almost polymerized reaction mixture, the added monomer was completely consumed and the M_n's of the polymers showed a direct increase against conversion of the added monomer. Block and statistical copolymerization of 2‐AdVE with n‐butyl vinyl ether (CH₂?CH? O? CH₂ CH₂CH₂CH₃; NBVE) were possible via living process based on the same initiating system to give the corresponding copolymers with narrow MWDs. Grass transition temperature (T_g) and thermal decomposition temperature (T_d) of the poly(2‐AdVE) (e.g., M_n = 22,000, M_w/M_n = 1.17) were 178 and 323 °C, respectively. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1629–1637, 2008     

Preparation of remarkably tough polyHIPE materials via polymerization of oil‐in‐water HIPEs involving 1‐vinyl‐5‐aminotetrazole

Interconnected microcellular polymeric monoliths having unexpected high mechanical strength have been prepared using the high internal phase emulsion (HIPE) methodology. Oil‐in water concentrated emulsions of aqueous 1‐vinyl‐5‐amino [1,2,3,4]tetrazole (1‐VAT) mixed with a low molar ratio (7%) of N,N′‐methylenebisacrylamide as crosslinking agent were prepared using dodecane as dispersed phase and a mixture of hydrophilic surfactants. “Reverse” polyHIPE materials were obtained after radical copolymerization, solvent extraction, and drying. Their morphology, chemical composition, and physicochemical behavior are discussed. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2942–2947, 2010     

α‐keto‐β‐diimine nickel‐catalyzed olefin polymerization: Effect of ortho‐aryl substituents and preparation of stereoblock copolymers

A series of α‐keto‐β‐diimine nickel complexes (Ar‐N = C(CH₃)‐C(O)‐C(CH₃)=N‐Ar)NiBr₂; Ar = 2,6‐R‐C₆H₃‐, R = Me, Et, iPr, and Ar = 2,4,6‐Me₃‐C₆H₃‐) was prepared. All corresponding ligands are unstable even under an inert atmosphere and in a freezer. Stable copper complex intermediates of ligand synthesis and ethyl substituted nickel complex were isolated and characterized by X‐ray. All nickel complexes were used for the polymerization of ethene, propylene, and hex‐1‐ene to investigate their livingness and the extent of chain‐walking. Low‐temperature propene polymerization with less bulky ortho‐substituents was less isospecific than the one with isopropyl derivative. Propene stereoblock copolymers were prepared by iPr derivative combining the polymerization at low temperature to prepare isotactic polypropylene (PP) block and at a higher temperature, supporting chain‐walking, to obtain amorphous regioirregular PP block. Alternatively, a copolymerization of propene with ethene was used for the preparation of amorphous block. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2440–2449     

Living polymerization of α‐amino acid‐N‐carboxyanhydrides

This article reviews recent developments in the polymerization of α‐amino acid‐ N‐carboxyanhydrides (NCAs) to form polypeptides. Traditional methods used to polymerize these monomers are described, and limitations in the utility of these systems for the preparation of polypeptides with controlled molecular weights and narrow molecular weight distributions are discussed. The development of transition‐metal‐based initiators, which activate the monomers to form covalent active species, permits the formation of polypeptides via the living polymerization of NCAs. In these systems, polymer molecular weights are controlled by monomer‐to‐initiator stoichiometry, polydispersities are low, and block copolypeptides can be prepared. The scope and limitations of these initiators and their key features and mode of operation are described in detail in this highlight. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3011–3018, 2000     

In situ atom transfer radical polymerization of styrene with a tetraethylthiuram disulfide/copper bromide/2,2′‐bipyridine initiating system

The living radical polymerization of styrene in bulk was successfully performed with a tetraethylthiuram disulfide/copper bromide/2,2′‐bipyridine (bpy) initiating system. The initiator Et₂NCS₂Br and the catalyst cuprous bromide (CuBr) were produced from the reactants in the system through in situ atom transfer radical polymerization (ATRP). A plot of natural logarithm of the ratio of original monomer concentration to monomer concentration at present, ln([M]₀/[M]) versus time gave a straight line, indicating that the kinetics was first‐order. The number‐average molecular weight from gel permeation chromatography (GPC) of obtained polystyrenes did not agree well with the calculated number‐average molecular weight but did correspond to a 0.5 initiator efficiency. The polydispersity index (i.e., the weight‐average molecular weight divided by the number‐average molecular weight) of obtained polymers was as low as 1.30. The resulting polystyrene with α‐diethyldithiocarbamate and ω‐Br end groups could initiate methyl methacrylate polymerization in the presence of CuBr/bpy or cuprous chloride/bpy complex catalyst through a conventional ATRP process. The block polymer was characterized with GPC, ¹H NMR, and differential scanning calorimetry. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 4001–4008, 2001     

Low temperature TEMPO‐mediated styrene polymerization in miniemulsion

The 2,2,6,6‐tetramethyl‐1‐piperidinyloxy (TEMPO)‐mediated stable free radical polymerization of styrene in miniemulsion at 100 °C is demonstrated. Although this temperature is 20–35 °C lower than typical temperatures used for TEMPO‐mediated polymerizations, reasonable reaction rates were achieved by the addition of ascorbic acid or a free radical initiator. More importantly, the living character of the chains was preserved; the degree of polymer “livingness” was comparable to polymerizations conducted at 135 °C. Polydispersities were broader than that observed in well‐controlled systems, ranging from ～1.4–1.6, and consistent with expectations for systems having a low activation rate. The results are significant for two reasons. They will facilitate TEMPO‐mediated minemulsion polymerizations in nonpressurized (or minimally pressurized) reactors, and they reveal the potential to expand the traditional temperature range of TEMPO and possibly other nitroxides in bulk, solution, and miniemulsion. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 232–242, 2006     

Role of sodium dodecylbenzenesulfonate in 2,2,6,6‐tetramethy‐1‐piperidinyloxy‐mediated styrene miniemulsion polymerization

In studying 2,2,6,6‐tetramethy‐1‐piperidinyloxy (TEMPO)‐mediated styrene miniemulsions, we have observed that the surfactant sodium dodecylbenzenesulfonate (SDBS) not only provides colloidal stability but also influences the rate of polymerization. Increasing the SDBS concentration results in higher polymerization rates, although the molecular weight distribution and particle size distribution are not significantly impacted. We have also examined another common sulfonate surfactant, DOWFAX 8390. In contrast to SDBS, DOWFAX 8390 does not affect the polymerization rate. Furthermore, DOWFAX‐stabilized polymerizations are slower than SDBS‐stabilized polymerizations. TEMPO‐mediated bulk styrene polymerizations are also accelerated significantly in the presence of SDBS. Although the mechanism for the rate acceleration is unknown, the experimental evidence suggests that SDBS is participating in the generation of radicals capable of propagating, thereby reducing the TEMPO concentration within the particles. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5974–5986, 2006     

Synthesis of Styrenic‐Terminated Methacrylate Macromonomers by Nitroanion‐Initiated Living Anionic Polymerization

N‐Isopropyl‐4‐vinylbenzylamine (PVBA) was synthesized and used as an initiator for the polymerization of methacrylates to synthesize macromonomers with terminal styrenic moieties. LiPVBA initiated a living polymerization and block copolymerization of methyl methacrylate, 2‐(N,N‐dimethylamino)ethyl methacrylate and tert‐butyl methacrylate and produced polymers having well‐controlled molecular weights and very low polydispersities (M̄_w/M̄_n < 1.1) in quantitative yield. ¹H NMR analysis revealed that the polymers contained terminal 4‐vinylbenzyl groups. The macromonomers were reactive in the copolymerization with styrene.     

Synthesis of poly(dimethylsiloxane)‐containing diblock and triblock copolymers by the combination of anionic ring‐opening polymerization of hexamethylcyclotrisiloxane and nitroxide‐mediated radical polymerization of methyl acrylate,isoprene, and styrene

Poly(dimethylsiloxane)‐containing diblock and triblock copolymers were prepared by the combination of anionic ring‐opening polymerization (AROP) of hexamethylcyclotrisiloxane (D₃) and nitroxide‐mediated radical polymerization (NMRP) of methyl acrylate (MA), isoprene (IP), and styrene (St). The first step was the preparation of a TIPNO‐based alkoxyamine carrying a 4‐bromophenyl group. The alkoxyamine was then treated with Li powder in ether, and AROP of D₃ was carried out using the resulting lithiophenyl alkoxyamine at room temperature, giving functional poly(D₃) with M_w/M_n of 1.09–1.16. NMRPs of MA, St, and IP from the poly(D₃) at 120 °C gave poly(D₃‐b‐MA), poly(D₃‐b‐St), and poly(D₃‐b‐IP) diblock copolymers, and subsequent NMRPs of St from poly(D₃‐b‐MA) and poly(D₃‐b‐IP) at 120 °C gave poly(D₃‐b‐MA‐b‐St) and poly(D₃‐b‐IP‐b‐St) triblock copolymers. The poly(dimethylsiloxane)‐containing diblock and triblock copolymers were analyzed by ¹H NMR and size exclusion chromatography. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 6153–6165, 2005     

Living/controlled radical copolymerization of N‐substituted maleimides with styrene in 1‐butyl‐3‐methylimidazolium hexafluorophosphate and anisole

The atom transfer radical copolymerization of N‐substituted maleimides such as N‐phenylmaleimide (PhMI), N‐cyclohexylmaleimide (ChMI), and N‐butylmaleimide (NBMI) with styrene initiated with dendritic polyarylether 2‐bromoisobutyrates in an ionic liquid, 1‐butyl‐3‐methylimidazolium hexafluorophosphate ([bmim][PF₆]), at room temperature and anisole at 110 °C was investigated. The dendritic‐linear block copolymers obtained in ionic liquid possessed well‐defined molecular weight and low polydispersity (1.05 < M_w/M_n < 1.32) and could be used as a macroinitiator for chain‐extension polymerization, suggesting the living nature of the reaction system. The ionic liquids containing catalyst could be recycled in the atom transfer radical polymerization systems without further treatment. Compared with polymerization conducted in anisole, the polymerization in ionic liquid had a stronger tendency for alternation. The tendency for alternation decreased in the order PhMI > NBMI > ChMI in [bmim][PF₆] and PhMI > ChMI > NBMI in anisole. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2156–2165, 2003     

Living cationic polymerization of α‐methyl vinyl ethers using SnCl4

Cationic polymerization of α‐methyl vinyl ethers was examined using an IBEA‐Et_1.5AlCl_1.5/SnCl₄ initiating system in toluene in the presence of ethyl acetate at 0 ～ ?78 °C. 2‐Ethylhexyl 2‐propenyl ether (EHPE) had a higher reactivity, compared to corresponding vinyl ethers. But the resulting polymers had low molecular weights at 0 or ?50 °C. In contrast, the polymerization of EHPE at ?78 °C almost quantitatively proceeded, and the number‐average molecular weight (M_n) of the obtained polymers increased in direct proportion to the EHPE conversion with quite narrow molecular weight distributions (weight‐average molecular weight/number‐average molecular weight ≤ 1.05). In monomer‐addition experiments, the M_n of the polymers shifted higher with low polydispersity as the polymerization proceeded, indicative of living polymerization. In the polymerization of methyl 2‐propenyl ether (MPE), the living‐like propagation also occurred under the reaction conditions similar to those for EHPE, but the elimination of the pendant methoxy groups was observed. The introduction of a more stable terminal group, quenched with sodium diethyl malonate, suppressed this decomposition, and the living polymerization proceeded. The glass transition temperature of the obtained poly(MPE) was 34 °C, which is much higher than that of the corresponding poly(vinyl ether). This poly(MPE) had solubility characteristics that differed from those of poly(vinyl ethers). © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2202–2211, 2008