A compact printed ultra‐wideband multiple‐input multiple‐output prototype with band‐notch ability for WiMAX,LTEband43, and WLAN systems

A compact ultra‐wideband multiple‐input multiple‐output (UWB‐MIMO) antenna with good isolation and multiple band‐notch abilities is developed in this work. It consists of two quadrant shaped monopole antennas backed by ground stubs. A good isolation is achieved due to the two proposed extended curved ground stubs. The frequency rejection for the WLAN system is realized by loading a capacitive loaded loop resonator adjacent to the feed line. The band rejection for the WiMAX and LTE band43 system is achieved by embedding a quadrant shaped CSRR on each radiator's surface. The measured bandwidth of the antenna is 3.06 GHz‐11 GHz (|S₁₁| < ?10 dB and |S₂₁| < ?18 dB) with a band rejection from 3.5 GHz‐4 GHz to 5.1 GHz‐5.85 GHz, respectively. Time domain performances are investigated in terms of group and phase delay characteristics. Diversity characteristics are evaluated in terms of the envelope correlation coefficient, mean effective gain, and channel capacity loss.     

Compact 2 × 2/4 × 4 tapered microstrip feed MIMO antenna configuration for high‐speed wireless applications with band stop filters

In this research, compact tapered feed 2 × 2/4 × 4 MIMO antenna are presented and investigated. The proposed MIMO antenna consists of a square patch and modified rectangular ground, which is chamfered at edges and etched with two semicircular slots. Likewise, obstruction caused by WiMAX and WLAN interfering bands is also taken care of by introducing notched filters. WiMAX is removed by embedding an rotated T‐type stub and a C‐type slot eliminates the WLAN band. The proposed antenna configuration covers the usable bandwidth of 3.07 to 11.25 GHz for 2 × 2 MIMO and 2.97 to 11.28 GHz for 4 × 4 MIMO. Also, both the MIMO antennas provide isolation <–20 dB. Proposed MIMO antennas are fabricated and characterized in near, far‐field, and diversity performance where envelope correlation coefficient, directive gain (DG), total active reflection coefficient (TARC), and channel capacity loss are simulated and measured. 4 × 4 MIMO antenna configuration provides stable gain with a maximum radiation efficiency of 91% and monopole radiation patterns.     

A low‐profile dual port UWB‐MIMO/diversity antenna with band rejection ability

A band notched ultra‐wideband (UWB) antenna is presented in this article as a good prospect for multiple‐input multiple‐output (MIMO)/diversity application. The proposed MIMO antenna is constituted of two modified rectangle‐shaped patch antenna elements. A stepped stub is extended from the modified ground plane as a decoupling element between the radiators to realize a good isolation level between them. A band rejection response is obtained by connecting an open resonant stub to each of the radiators. The simulated prototype is fabricated and tested for verification. Results reveal that the proposed prototype provides a 10 dB return loss bandwidth from 3.08 to 10.98 GHz with band notch characteristics from 4.98 to 5.96 GHz, and a good port isolation level (S₂₁ ≤ 20). Diversity performances are ensured in terms of total active reflection coefficient, envelope correlation coefficient (<0.013 except notch band), diversity gain (≈9.51 dB), mean effective gain ratio (≈1), and channel capacity loss (≤0.35 bps/HZ except notch band). It evidences that the presented band notched UWB antenna can be a good prospective for MIMO/diversity applications.     

A WLAN band‐notched compact four element UWB MIMO antenna

A compact four‐element multiple‐input‐multiple‐output (MIMO) antenna for ultra‐wideband (UWB) applications with WLAN band‐notched characteristics is proposed here. The proposed antenna has been designed to operate from 2 to 12 GHz while reject the frequencies between 4.9 to 6.4 GHz. The four antenna elements are placed orthogonal to attain the polarization diversity and high isolation. A thin stub connected to the ground plane is deployed as a LC notch filter to accomplish the rejected WLAN band in each antenna element. The mutual coupling between the adjacent elements is at least 17 dB while it has low indoor and outdoor envelop correlation (<0.45) and high gain with compact size of two boards, each measuring 50 × 25 mm². To validate the concept, the prototype antenna is manufactured and measured. The comparison of the simulation results showed good agreement with the measured results. The low‐profile design and compact size of the proposed MIMO antenna make it a good candidate for diversity applications desired in portable devices operating in the UWB region.     

Modified ground with 50 Ω step fed WLAN notch 2 × 2 MIMO UWB antenna

In this research paper, an optimized 2 × 2 MIMO UWB antenna (antenna‐E) with half circled radiators as well as 50 Ω step fed has been introduced. The proposed UWB MIMO antenna has been evolved from recent peer published papers that provide WLAN notch (5.15‐5.85GHz), ultra wide band width (3.1‐10.6 GHz) and again a very good isolation (?20 dB) also maintained. In this paper the evolutions have been derived from antenna‐A to antenna‐E. The Ultra wide band is achieved by using step feed line, cutting a metal strip on a partial ground plane, a rectangular slot underneath the feed line of each radiator in antenna‐E. A high isolation (?20 dB) is obtained by introducing two inverted Г shaped stubs in the ground plane. Both antenna‐D and antenna‐E maintain high isolation (?20 dB). But antenna‐E performs better isolation compared to antenna‐D. The notch at WLAN band (5.15‐5.85GHz) is achieved by etching rectangular C‐shaped slot on the both the radiators. In antenna‐E two radiators are placed horizontally where as in antenna‐D two radiators placed orthogonally. It has been observed that the dimension of final outcome (antenna‐E) is reduced by 33% compared to antenna‐D without compromising the overall performance of the antenna.     

A UWB MIMO slot antenna using defected ground structures for high isolation

In this article, a multiple‐input‐multiple‐output (MIMO) antenna with high isolation is proposed for ultrawideband (UWB) applications. The proposed MIMO antenna consists of two symmetric slot antenna elements with quasi F‐shaped radiators and L‐shaped open‐slots to increase impedance bandwidth. To improve isolation at the lower band, a decoupling network, composed of a narrow slot and a fork‐shaped slot, is introduced in the common ground. The measured results show that the proposed antenna provides high isolation of better than 20 dB over the operating band from 3 to 10.9 GHz. The performances of the UWB MIMO antenna in terms of radiation patterns, peak gain, envelope correlation coefficient, mean effective gain, and diversity gain are also studied.     

Compact dual wide‐band four/eight elements MIMO antenna for WLAN applications

A compact four and eight elements multiple‐input‐multiple‐output (MIMO) antenna designed for WLAN applications is presented in this article. The antenna operates in IEEE 802.11b/g WLAN (2.4 GHz), IEEE 802.11 ac/n WLAN (5.2 and 5.8 GHz) and WiMAX (5.8 GHz) bands. The resonated mode of the antenna is achieved by two unequal Reverse‐L shaped, line‐shaped slots on top and parasitic element on the ground layer. The single antenna provides wide bandwidth of about 29% (2.3‐3.1 GHz) in lower and 22% (4.9‐6.1 GHz) in the upper band. The compactness of the single element antenna is found about 95% with respect to the patch and 61% in overall dimension. Thereafter an investigation is carried out to design two, four, and eight elements MIMO antennas. All of the multi‐element structures provide compact configuration and cover entire WLAN frequency ranges (2.4‐2.48 and 5.15‐5.85 GHz). The dimension of the proposed eight element MIMO antenna is 102 × 52 × 1.6 mm³. It covers the frequency (measured) from 2.4 to 3.1 GHz and 5 to 6.1 GHz. The diversity performance of the proposed MIMO antenna is also assessed in terms of the envelope correlation coefficient (ECC), diversity gain (DG), and total active reflection co‐efficient (TARC). The ECC is found <0.5 whereas the DG >9.0 is obtained for the desired bands.     

Low profile four‐port super‐wideband multiple‐input‐multiple‐output antenna with triple band rejection characteristics

A quad‐port planar multiple‐input‐multiple‐output (MIMO) antenna possessing super‐wideband (SWB) operational features and triple‐band rejection characteristics is designed. The proposed MIMO configuration consists of four modified‐elliptical‐self‐complementary‐antenna (MESCA) elements, which are excited by tapered co‐planar waveguide (TCPW) feed lines. A radiator‐matched complementary slot is present in the ground conductor patch of each MESCA element. The proposed MIMO antenna exhibits a bandwidth ratio of 36:1 (|S₁₁| < ?10 dB; 0.97‐35 GHz). Further, a step‐like slit‐resonator is etched in the radiator to eliminate interferences at 3.5 GHz. A hexagonal shaped complementary split ring resonator (CSRR) is also loaded on the MESCA radiator to remove interferences at 5.5 and 8.5 GHz. The MIMO antenna is fabricated on FR‐4 substrate of size 63 × 63 mm² and experimental results are found in good agreement with the simulated results. The MIMO antenna exhibits inter‐element isolation >17 dB and envelope correlation coefficient (ECC) <0.01 at all the four ports.     

Complementary meander‐line‐inspired dielectric resonator multiple‐input‐multiple‐output antenna for dual‐band applications

The communication presents a simple dielectric resonator (DR) multiple‐input‐multiple‐output (MIMO) dual‐band antenna. It utilizes two “I”‐shaped DR elements to construct an “I”‐shaped DR array antenna (IDRAA) for MIMO applications. The ground plane of the antenna is defected by two spiral complementary meander lines and two circular ground slots. In the configuration, two “I”‐shaped DR elements are placed with a separation of 0.098λ. The antenna covers dual‐band frequency spectra from 3.46 to 5.37 GHz (43.26%) and from 5.89 to 6.49 GHz (9.7%). It ensures the C‐band downlink (3.7‐4.2 GHz), uplink (5.925‐6.425 GHz), and WiMAX (5.15‐5.35 GHz) frequency bands. Each DR element is excited with a 50‐Ω microstrip line feed with aperture‐coupling mechanism. The antenna offers very high port isolation of around 18.5 and 20 dB in the lower band and upper band, respectively. The proposed structure is suitable to operate in the MIMO system because of its very nominal envelope correlation coefficient (<0.015) and high diversity gain (>9.8). The MIMO antenna provides very good mean effective gain value (±0.35 dB) and low channel capacity loss (<0.35 bit/s/Hz) throughout the entire operating bands. Simulated and measured results are in good agreement and they approve the suitability of the proposed IDRAA for C‐band uplink and downlink applications and WiMAX band applications.     

Compact slot‐loaded ultra‐wideband multiple‐input multiple‐output antenna with fractal‐inspired isolator

In this paper, a compact multielement ultra‐wideband (UWB) multiple‐input multiple‐output (MIMO) antenna is presented. The proposed antenna is designed by integrating novel technique of stub‐loaded slot, split square ring (SSR), and fractal‐inspired isolator. The antenna size is effectively miniaturized by implementing three‐sided symmetrical stub‐loaded Koch slot and square split ring. The impedance bandwidth is broadened by using small notched partial ground plane. The mutual coupling between the element is impressively reduced by isolating the structure with a Sierpinski fractal. As a result, the proposed antenna achieves a UWB response with a very broad impedance bandwidth of 3.1 to 19 GHz. Moreover, the proposed antenna obtains high peak stable gain and diversity gain of up to 10 dBi, lower group delay (<1 ns), and lower envelop correlation coefficient of <.01. The proposed antenna has electrically small dimensions of 35 × 53 × 0.8 mm. With this low‐profile configuration, the proposed antenna is especially a good candidate for portable UWB‐MIMO wireless communication system.     

A miniaturized multi‐wideband Quasi‐Yagi MIMO antenna system

A multi‐band directional multiple‐input–multiple‐output (MIMO) antenna system is presented based on a rectangular loop excited Quasi‐Yagi configuration. A 64% reduction in size is obtained using a rectangular meandered element as well as a small ground plane. The proposed two‐element MIMO antenna system covers the Telemetry L‐band and several LTE/WLAN bands. It has a wide measured bandwidth of 689 MHz (1.897–2.586 GHz) in the desired band centered at 2 GHz, and a measured bandwidth of more than 168 MHz across rest of the bands. The MIMO antenna system has a total size of 45 × 120 × 0.76 mm³, with a single element size of 55 × 60 × 0.76 mm³. The non‐desired back‐lobe radiation which is obtained using a small ground plane, is significantly reduced by using a novel defected ground structure (DGS) as compared with the complex techniques present in literature. The proposed DGS provides a high measured front‐to‐back ratio of 14 dB at 2 GHz and 11 dB in other bands. A maximum measured realized gain of 5.8 dBi is obtained in the desired band using a single parasitic director element. The proposed MIMO antenna system has a minimum measured radiation efficiency of 70%, isolation of 12 dB, and envelope correlation coefficient of 0.098 within all bands which ensures very good MIMO performance.     

Compact eight‐port MIMO/diversity antenna with band rejection characteristics

A new compact three‐dimensional multiple‐input‐multiple‐output (MIMO) antenna comprised of eight antenna elements is presented. The unit cell of the proposed MIMO/diversity antenna consists of three elliptical rings connected together in the region close to the feed line and a rectangular‐shaped modified ground plane. To achieve polarization diversity with the proposed eight‐port MIMO configuration, four antenna elements are horizontally arranged and the remaining four are vertically oriented. The proposed antenna has an impedance bandwidth (S₁₁ < ?10 dB) of 25.68 GHz (3.1‐28.78 GHz) with a wireless local area network notch‐band at 5.8 GHz (5.2‐6.5 GHz). In addition to polarization diversity, the proposed antenna provides a reliable link with wireless devices. The prototype antenna design is fabricated and measured for diversity performance. Also, the proposed MIMO antenna provides good performance metrics such as apparent diversity gain, channel capacity loss, envelope correlation coefficient, isolation, mean effective gain, multiplexing efficiency, and total active reflection coefficient.     

Compact ultra‐wideband slot antenna with three notched‐band characteristics

A very compact ultra‐wideband (UWB) slot antenna with three L‐shaped slots for notched‐band characteristics is presented in this article. The antenna is designed and fabricated using a new stepped slot with different size, integrated in the ground plane, and excited by a 50 Ω microstrip transmission line. The stepped slot is used to minimize the dimensions of the antenna and to achieve an impedance bandwidth between 2.65 and 11.05 GHz with voltage standing wave ratio (VSWR) less than 2. The length of the stepped slot is equal to a quarter wavelength to create a resonance in the desired frequency. Three L‐shaped slots with various sizes are etched in the ground plane to reject three frequency bands in C‐band (3.7‐4.2 GHz), WLAN (5.15‐5.825 GHz), and X‐band (7.25‐7.75 GHz), respectively. The notched‐band frequency can be controlled by changing the length of the L‐shaped slot. The proposed antenna has a very small size (20.25 × 8 × 1.27 mm³) compared with previous works. The measured and simulated results show a good agreement in terms of radiation pattern and impedance matching.     

Compact C‐shaped MIMO diversity antenna for quad band applications with hexagonal stub for isolation improvement

A compact MIMO antenna was proposed in this article. The designed antenna is compact in size with dimensions of 20 × 34 × 1.6 mm. In this proposed antenna model the patch consisting of two counter facing C‐shaped elements facing each other in which a hexagonal ring attached to a strip line which is placed in between the two C‐shaped patch acts as the stub. The novelty of the antenna elements lies isolation improvement by using the ground stub with the use of circular ring resonator. The proposed antenna operates in four bands in which 2.66 to 3.60 GHz (Wi‐Max, Wi‐Fi), 4.52 to 5.78 GHz (WLAN), 6.59 to 7.40 GHz (satellite communication), and 9.55 to 10.91 GHz and having bandwidth of 0.94, 1.26, 0.81, and 1.36 GHz at four bands. The envelope correlation coefficient is ECC ≤ 0.3 and diversity gain > 9.8 dB for the operating bands of antenna proposed. This antenna can work in the bands of Wi‐Max, Wi‐Fi, WLAN, satellite communication in X‐band and for radio location, and astronomy applications.     

Epsilon‐shaped circularly polarized strip and slot‐loaded ultra‐wideband antenna for Ku‐band and K‐band

A compact epsilon‐shaped (ε) ultra‐wideband (UWB) antenna for dual‐wideband circularly polarized (CP) applications has been investigated in this article. It consists of a stepped stub loaded modified annular ring‐shaped radiator and modified CPW ground plane. The ground plane is loaded with two semicircular notches and a spiral‐shaped slot. The impedance bandwidth (IBW) is 97.02% (10.4‐30 GHz) along with an overall footprint of 20 × 20 mm². The fractional axial ratio bandwidth (3‐dB ARBW) for two wide bands is 38.50% (13.30‐19.64 GHz) and 6.45% (26.25‐28.00 GHz), respectively. The proposed antenna is left‐hand circularly polarized with a peak gain of about 5.09 and 5.14 dB in both 3‐dB ARBW bands. The proposed antenna is dominating other reported CP antenna structures in terms of number of CP bands, 3‐dB ARBW, IBW, peak gain, and dimensions.     

Multi‐standard,multi‐band planar multiple input multiple output antenna with diversity effects for wireless applications

Wireless generations require the miniaturized radiating elements for the portable devices. This research article presents a miniaturized multiple input multiple output (MIMO) antenna for IEEE 802.11 (WLAN) and IEEE 802.16 (WiMAX) wireless standards. The multi‐standard, multi‐band MIMO with 1 × 2 diversity arms is impedance matched with 50 Ω microstrip line on FR‐4 dielectric substrate having dielectric constant 4.4 and 1.524 mm thickness. The simple low profile design covers16.46% (2.23‐2.64 GHz) and 12.37% (3.26‐3.70 GHz) microwave frequency bands, with voltage standing wave ratio (VSWR) ≤ 2 achieves more than 12.5 dB of isolation between radiating ports. The proposed MIMO with inverted L shaped slot exhibits more than 73% efficiency, and more than 4 dBi gain at resonant frequencies. The presented MIMO is designed on FR‐4 dielectric substrate of size 45.1 × 90.2 mm². The compact size of the radiating element is 6.7 × 6.7 mm². The effect of radiations on the body has been evaluated using specific absorption rate (SAR) and found to be in safety limit.     

A triple‐band antenna for MIMO WLAN applications

A novel triple‐band antenna element by etching parasitic slot on ground plane is presented. A three‐element antenna system for WLAN MIMO communications is fabricated by using the proposed antenna element. The triple‐band antenna element is designed for the WLAN standard frequency ranges (2.4‐2.485, 5.15‐5.35, and 5.475‐5.725 GHz). The three identical antenna elements are rotationally symmetric on the substrate, isolated by using metal‐vias cavity. The measured average peak gain within the operational bandwidth is about 2.7 dBi. The isolation between the antenna elements can achieve better than 17 dB at the lower band (2.25‐2.65 GHz), while more than 32 dB at the higher bands (5.20‐5.35 and 5.47‐5.73 GHz) is obtained.     

Compact hybrid Sierpinski Koch fractal UWB MIMO antenna with pattern diversity

In this article, a compact 2 element UWB MIMO antenna is proposed. It has a compact size of 40 mm × 20 mm (800 mm²). The antenna utilizes hybrid Sierpinski Koch fractal shape as the radiating element. The antenna elements are placed parallel and close to each other. The isolation between the antenna elements is increased by employing a modified stepped ground plane and a reflecting ground stub. The use of stub results in pattern diversity. A U‐ Shaped slot is etched in the radiating element to notch the WLAN band that interferes with UWB. The antenna performance is measured in terms of S‐parameter, radiation pattern and diversity performance. Considering S₁₁ < ?10 dB, the antenna offers an acceptable impedance bandwidth from 2.5 to 11 GHz, with an isolation better than 20 dB over the UWB range. It has a stable omnidirectional pattern. In terms of diversity performance, the antenna has an envelope correlation coefficient (ECC) of <0.1 and capacity loss of <0.1 bps/Hz. The channel capacity of the antenna in the outdoor environment is obtained using Wireless Insite. The channel capacity is found to be 2 Gb/s. The proposed antenna thus can be a good candidate for portable UWB application.     

Dual‐band CPW fed MIMO antenna with polarization diversity and improved gain

A dual‐band MIMO slot antenna with polarization diversity and improved gain is proposed in this article. The antenna is composed of two C‐type back‐to‐back connected slot resonators and offers resonances at 3.5 and 5.2 GHz. This antenna element is further used to design a MIMO antenna. By introducing one U‐shaped slot between two antenna elements, isolation between the ports of this MIMO antenna is improved further. Finally, an artificial magnetic conductor (AMC) is placed below the MIMO antenna to enhance its gain. Gain enhancement of 1.5 and 2.2 dB is achieved at lower and upper band, respectively. S‐parameters, radiation patterns, gain, envelope correlation coefficient, and channel capacity loss are investigated to conclude about its performances in MIMO applications. Dual band dual polarization (circular and linear), improved isolation, polarization diversity (right‐hand circular polarization and left‐hand circular polarization), gain enhancement all are presented in a simple design represents the novelty of the proposed MIMO antenna.