“Unleaded” Perovskites: Status Quo and Future Prospects of Tin‐Based Perovskite Solar Cells

The tremendous interest focused on organic–inorganic halide perovskites since 2012 derives from their unique optical and electrical properties, which make them excellent photovoltaic materials. Pb‐based halide perovskite solar cells, in particular, currently stand at a record efficiency of ≈23%, fulfilling their potential toward commercialization. However, because of the toxicity concerns of Pb‐based perovskite solar cells, their market prospects are hindered. In principle, Pb can be replaced with other less‐toxic, environmentally benign metals. Sn‐based perovskites are thus the far most promising alternative due to their very similar and perhaps even superior semiconductor characteristics. After years of effort invested in Sn‐based halide perovskites, sufficient breakthroughs have finally been achieved that make them the next runners up to the Pb halide perovskites. To help the reader better understand the nature of Sn‐based halide perovskites, their optical and electrical properties are systematically discussed. Recent progress in Sn‐based perovskite solar cells, focusing mainly on film fabrication methods and different device architectures, and highlighting roadblocks to progress and opportunities for future work are reviewed. Finally, a brief overview of mixed Sn/Pb‐based systems with their anomalous yet beneficial optical trends are discussed. The current challenges and a future outlook for Sn‐based perovskites are discussed.     

The Electrical and Optical Properties of Organometal Halide Perovskites Relevant to Optoelectronic Performance

Organometal halide perovskites are under intense study for use in optoelectronics. Methylammonium and formamidinium lead iodide show impressive performance as photovoltaic materials; a premise that has spurred investigations into light‐emitting devices and photodetectors. Herein, the optical and electrical material properties of organometal halide perovskites are reviewed. An overview is given on how the material composition and morphology are tied to these properties, and how these properties ultimately affect device performance. Material attributes and techniques used to estimate them are analyzed for different perovskite materials, with a particular focus on the bandgap, mobility, diffusion length, carrier lifetime, and trap‐state density.     

From Lead Halide Perovskites to Lead‐Free Metal Halide Perovskites and Perovskite Derivatives

Despite the exciting progress on power conversion efficiencies, the commercialization of the emerging lead (Pb) halide perovskite solar cell technology still faces significant challenges, one of which is the inclusion of toxic Pb. Searching for Pb‐free perovskite solar cell absorbers is currently an attractive research direction. The approaches used for and the consequences of Pb replacement are reviewed herein. Reviews on the theoretical understanding of the electronic, optical, and defect properties of Pb and Pb‐free halide perovskites and perovskite derivatives are provided, as well as the experimental results available in the literature. The theoretical understanding explains well why Pb halide perovskites exhibit superior photovoltaic properties, but Pb‐free perovskites and perovskite derivatives do not.     

Tunable Dual‐Emission in Monodispersed Sb3+/Mn2+ Codoped Cs2NaInCl6 Perovskite Nanocrystals through an Energy Transfer Process

Double halide perovskites are a class of promising semiconductors applied in photocatalysis, photovoltaic devices, and emitters to replace lead halide perovskites, owing to their nontoxicity and chemical stability. However, most double perovskites always exhibit low photoluminescence quantum efficiency (PLQE) due to the indirect bandgap structure or parity‐forbidden transition problem, limiting their further applications. Herein, the self‐trapped excitons emission of Cs₂NaInCl₆ by Sb‐doping, showing a blue emission with high PLQE of 84%, is improved. Further, Sb/Mn codoped Cs₂NaInCl₆ nanocrystals are successfully synthesized by the hot‐injection method, showing a tunable dual‐emission covering the white‐light spectrum. The studies of PL properties and dynamics reveal that an energy transfer process can occur between the self‐trapped excitons and dopants (Mn²⁺). The work provides a new perspective to design novel lead‐free double perovskites for realizing a unique white‐light emission.     

Photonics and Optoelectronics of 2D Metal‐Halide Perovskites

In the growing list of 2D semiconductors as potential successors to silicon in future devices, metal‐halide perovskites have recently joined the family. Unlike other conversional 2D covalent semiconductors such as graphene, transition metal dichalcogenides, black phosphorus, etc., 2D perovskites are ionic materials, affording many distinct properties of their own, including high photoluminescence quantum efficiency, balanced large exciton binding energy and oscillator strength, and long carrier diffusion length. These unique properties make 2D perovskites potential candidates for optoelectronic and photonic devices such as solar cells, light‐emitting diodes, photodetectors, nanolasers, waveguides, modulators, and so on, which represent a relatively new but exciting and rapidly expanding area of research. In this Review, the recent advances in emerging 2D metal‐halide perovskites and their applications in the fields of optoelectronics and photonics are summarized and insights into the future direction of these fields are offered.     

Doping and Switchable Photovoltaic Effect in Lead‐Free Perovskites Enabled by Metal Cation Transmutation

Creating defect tolerant lead‐free halide perovskites is the major challenge for development of high‐performance photovoltaics with nontoxic absorbers. Few compounds of Sn, Sb, or Bi possess ns² electronic configuration similar to lead, but their poor photovoltaic performances inspire us to evaluate other factors influencing defect tolerance properties. The effect of heavy metal cation (Bi) transmutation and ionic migration on the defects and carrier properties in a 2D layered perovskite (NH₄)₃(Sb_(1?x)Bi_x)₂I₉ system is investigated. It is shown, for the first time, the possibility of engineering the carriers in halide perovskites via metal cation transmutation to successfully form intrinsic p‐ and n‐type materials. It is also shown that this material possesses a direct–indirect bandgap enabling high absorption coefficient, extended carrier lifetimes >100 ns, and low trap densities similar to lead halide perovskites. This study also demonstrates the possibility of electrical poling to induce switchable photovoltaic effect without additional electron and hole transport layers.     

Metal‐Halide Perovskite Transistors for Printed Electronics: Challenges and Opportunities

Following the unprecedented rise in photovoltaic power conversion efficiencies during the past five years, metal‐halide perovskites (MHPs) have emerged as a new and highly promising class of solar‐energy materials. Their extraordinary electrical and optical properties combined with the abundance of the raw materials, the simplicity of synthetic routes, and processing versatility make MHPs ideal for cost‐efficient, large‐volume manufacturing of a plethora of optoelectronic devices that span far beyond photovoltaics. Herein looks beyond current applications in the field of energy, to the area of large‐area electronics using MHPs as the semiconductor material. A comprehensive overview of the relevant fundamental material properties of MHPs, including crystal structure, electronic states, and charge transport, is provided first. Thereafter, recent demonstrations of MHP‐based thin‐film transistors and their application in logic circuits, as well as bi‐functional devices such as light‐sensing and light‐emitting transistors, are discussed. Finally, the challenges and opportunities in the area of MHPs‐based electronics, with particular emphasis on manufacturing, stability, and health and environmental concerns, are highlighted.     

Structural and Functional Diversity in Lead‐Free Halide Perovskite Materials

Lead halide perovskites have emerged as promising semiconducting materials for different applications owing to their superior optoelectronic properties. Although the community holds different views toward the toxic lead in these high‐performance perovskites, it is certainly preferred to replace lead with nontoxic, or at least less‐toxic, elements while maintaining the superior properties. Here, the design rules for lead‐free perovskite materials with structural dimensions from 3D to 0D are presented. Recent progress in lead‐free halide perovskites is reviewed, and the relationships between the structures and fundamental properties are summarized, including optical, electric, and magnetic‐related properties. 3D perovskites, especially A₂B⁺B³⁺X₆‐type double perovskites, demonstrate very promising optoelectronic prospects, while low‐dimensional perovskites show rich structural diversity, resulting in abundant properties for optical, electric, magnetic, and multifunctional applications. Furthermore, based on these structure–property relationships, strategies for multifunctional perovskite design are proposed. The challenges and future directions of lead‐free perovskite applications are also highlighted, with emphasis on materials development and device fabrication. The research on lead‐free halide perovskites at Linköping University has benefited from inspirational discussions with Prof. Olle Inganäs.     

Merits and Challenges of Ruddlesden–Popper Soft Halide Perovskites in Electro‐Optics and Optoelectronics

Following the rejuvenation of 3D organic–inorganic hybrid perovskites, like CH₃NH₃PbI₃, (quasi)‐2D Ruddlesden–Popper soft halide perovskites R₂A_n?1Pb_nX_3n+1 have recently become another focus in the optoelectronic and photovoltaic device community. Although quasi‐2D perovskites were first introduced to stabilize optoelectronic/photovoltaic devices against moisture, more interesting properties and device applications, such as solar cells, light‐emitting diodes, white‐light emitters, lasers, and polaritonic emission, have followed. While delicate engineering design has pushed the performance of various devices forward remarkably, understanding of the fundamental properties, especially the charge‐transfer process, electron–phonon interactions, and the growth mechanism in (quasi)‐2D halide perovskites, remains limited and even controversial. Here, after reviewing the current understanding and the nexus between optoelectronic/photovoltaic properties of 2D and 3D halide perovskites, the growth mechanisms, charge‐transfer processes, vibrational properties, and electron–phonon interactions of soft halide perovskites, mainly in quasi‐2D systems, are discussed. It is suggested that single‐crystal‐based studies are needed to deepen the understanding of the aforementioned fundamental properties, and will eventually contribute to device performance.     

Tin and Mixed Lead–Tin Halide Perovskite Solar Cells: Progress and their Application in Tandem Solar Cells

Metal halide perovskites have recently attracted enormous attention for photovoltaic applications due to their superior optical and electrical properties. Lead (Pb) halide perovskites stand out among this material series, with a power conversion efficiency (PCE) over 25%. According to the Shockley–Queisser (SQ) limit, lead halide perovskites typically exhibit bandgaps that are not within the optimal range for single-junction solar cells. Partial or complete replacement of lead with tin (Sn) is gaining increasing research interest, due to the promise of further narrowing the bandgaps. This enables ideal solar utilization for single-junction solar cells as well as the construction of all-perovskite tandem solar cells. In addition, the usage of Sn provides a path to the fabrication of lead-free or Pb-reduced perovskite solar cells (PSCs). Recent progress in addressing the challenges of fabricating efficient Sn halide and mixed lead–tin (Pb–Sn) halide PSCs is summarized herein. Mixed Pb–Sn halide perovskites hold promise not only for higher efficiency and more stable single-junction solar cells but also for efficient all-perovskite monolithic tandem solar cells.     

All Inorganic Halide Perovskites Nanosystem: Synthesis,Structural Features,Optical Properties and Optoelectronic Applications

The recent success of organometallic halide perovskites (OHPs) in photovoltaic devices has triggered lots of corresponding research and many perovskite analogues have been developed to look for devices with comparable performance but better stability. Upon the preparation of all inorganic halide perovskite nanocrystals (IHP NCs), research activities have soared due to their better stability, ultrahigh photoluminescence quantum yield (PL QY), and composition dependent luminescence covering the whole visible region with narrow line‐width. They are expected to be promising materials for next generation lighting and display, and many other applications. Within two years, a lot of interesting results have been observed. Here, the synthesis of IHPs is reviewed, and their progresses in optoelectronic devices and optical applications, such as light‐emitting diodes (LEDs), photodetectors (PDs), solar cells (SCs), and lasing, is presented. Information and recent understanding of their crystal structures and morphology modulations are addressed. Finally, a brief outlook is given, highlighting the presently main problems and their possible solutions and future development directions.     

2D Perovskites with Short Interlayer Distance for High‐Performance Solar Cell Application

2D perovskites have emerged as one of the most promising photovoltaic materials owing to their excellent stability compared with their 3D counterparts. However, in typical 2D perovskites, the highly conductive inorganic layers are isolated by large organic cations leading to quantum confinement and thus inferior electrical conductivity across layers. To address this issue, the large organic cations are replaced with small propane‐1,3‐diammonium (PDA) cations to reduce distance between the inorganic perovskite layers. As shown by optical characterizations, quantum confinement is no longer dominating in the PDA‐based 2D perovskites. This leads to considerable enhancement of charge transport as confirmed with electrochemical impedance spectroscopy, time‐resolved photoluminescence, and mobility measurements. The improved electric properties of the interlayer‐engineered 2D perovskites yield a power conversion efficiency of 13.0%. Furthermore, environmental stabilities of the PDA‐based 2D perovskites are improved. PDA‐based 2D perovskite solar cells (PSCs) with encapsulation can retain over 90% of their efficiency upon storage for over 1000 h, and PSCs without encapsulation can maintain their initial efficiency at 70 °C for over 100 h, which exhibit promising stabilities. These results reveal excellent optoelectronic properties and intrinsic stabilities of the layered perovskites with reduced interlayer distance.     

Cubic NaSbS2 as an Ionic–Electronic Coupled Semiconductor for Switchable Photovoltaic and Neuromorphic Device Applications

The recent emergence of lead halide perovskites as ionic–electronic coupled semiconductors motivates the investigation of alternative solution-processable materials with similar modulatable ionic and electronic transport properties. Here, a novel semiconductor—cubic NaSbS₂—for ionic–electronic coupled transport is investigated through a combined theoretical and experimental approach. The material exhibits mixed ionic–electronic conductivity in inert atmosphere and superionic conductivity in humid air. It is shown that post deposition electronic reconfigurability in this material enabled by an electric field induces ionic segregation enabling a switchable photovoltaic effect. Utilizing post-perturbation of the ionic composition of the material via electrical biasing and persistent photoconductivity, multistate memristive synapses with higher-order weight modulations are realized for neuromorphic computing, opening up novel applications with such ionic–electronic coupled materials.     

Inorganic lead-based halide perovskites: From fundamental properties to photovoltaic applications

Compared with organic–inorganic hybrid halide perovskites (OIHPs), inorganic cesium lead halide perovskites (CsPbX₃) possess superior intrinsic stability for high temperatures and are considered one of the most attractive research hotspots in the perovskite photovoltaic (PV) field in the past several years. The PCE of CsPbX₃ inorganic perovskite solar cells (IPSCs) has increased from 2.9% in 2015 to more than 20% with excellent stability. There are still many on-going studies on the properties of perovskite materials and their applications in PV technology, thereby needing a thorough understanding. Here, the progress of inorganic perovskites is systematically introduced, including the fundamental properties of CsPbX₃ materials and CsPbX₃-based PV devices. The origins of stability and instability of CsPbX₃ and defects in CsPbX₃ are discussed. CsPbI₃-, CsPbI₂Br-, CsPbIBr₂- and CsPbBr₃-based PV devices and performance are comprehensively reviewed. The stabilization methods and mechanism for the photoactive phases of inorganic perovskites with low bandgap are emphasized. Reported strategies to boost the performance of CsPbX₃-based IPSCs are summarized. In the end, the potential of inorganic perovskites is evaluated, which opens up new prospects for the commercialization of IPSCs.     

Fluorinated 2D Lead Iodide Perovskite Ferroelectrics

Hybrid perovskite materials are famous for their great application potential in photovoltaics and optoelectronics. Among them, lead‐iodide‐based perovskites receive great attention because of their good optical absorption ability and excellent electrical transport properties. Although many believe the ferroelectric photovoltaic effect (FEPV) plays a crucial role for the high conversion efficiency, the ferroelectricity in CH₃NH₃PbI₃ is still under debate, and obtaining ferroelectric lead iodide perovskites is still challenging. In order to avoid the randomness and blindness in the conventional method of searching for perovskite ferroelectrics, a design strategy of fluorine modification is developed. As a demonstration, a nonpolar lead iodide perovskite is modified and a new 2D fluorinated layered hybrid perovskite material of (4,4‐difluorocyclohexylammonium)₂PbI₄, 1 , is obtained, which possesses clear ferroelectricity with controllable spontaneous polarization. The direct bandgap of 2.38 eV with strong photoluminescence also guarantees the direct observation of polarization‐induced FEPV. More importantly, the 2D structure and fluorination are also expected to achieve both good stability and charge transport properties. 1 is not only a 2D fluorinated lead iodide perovskite with confirmed ferroelectricity, but also a great platform for studying the effect of ferroelectricity and FEPV in the context of lead halide perovskite solar cells and other optoelectronic applications.     

Flexible,Printable Soft‐X‐Ray Detectors Based on All‐Inorganic Perovskite Quantum Dots

Metal halide perovskites represent a family of the most promising materials for fascinating photovoltaic and photodetector applications due to their unique optoelectronic properties and much needed simple and low‐cost fabrication process. The high atomic number (Z) of their constituents and significantly higher carrier mobility also make perovskite semiconductors suitable for the detection of ionizing radiation. By taking advantage of that, the direct detection of soft‐X‐ray‐induced photocurrent is demonstrated in both rigid and flexible detectors based on all‐inorganic halide perovskite quantum dots (QDs) synthesized via a solution process. Utilizing a synchrotron soft‐X‐ray beamline, high sensitivities of up to 1450 µC Gy_air^?1 cm^?2 are achieved under an X‐ray dose rate of 0.0172 mGy_air s^?1 with only 0.1 V bias voltage, which is about 70‐fold more sensitive than conventional α‐Se devices. Furthermore, the perovskite film is printed homogeneously on various substrates by the inexpensive inkjet printing method to demonstrate large‐scale fabrication of arrays of multichannel detectors. These results suggest that the perovskite QDs are ideal candidates for the detection of soft X‐rays and for large‐area flat or flexible panels with tremendous application potential in multidimensional and different architectures imaging technologies.     

Electro‐Optic Modulation in Hybrid Metal Halide Perovskites

Rapid and efficient conversion of electrical signals to optical signals is needed in telecommunications and data network interconnection. The linear electro‐optic (EO) effect in noncentrosymmetric materials offers a pathway to such conversion. Conventional inorganic EO materials make on‐chip integration challenging, while organic nonlinear molecules suffer from thermodynamic molecular disordering that decreases the EO coefficient of the material. It has been posited that hybrid metal halide perovskites could potentially combine the advantages of inorganic materials (stable crystal orientation) with those of organic materials (solution processing). Here, layered metal halide perovskites are reported and investigated for in‐plane birefringence and linear electro‐optic response. Phenylmethylammonium lead chloride (PMA₂PbCl₄) crystals are grown that exhibit a noncentrosymmetric space group. Birefringence measurements and Raman spectroscopy confirm optical and structural anisotropy in the material. By applying an electric field on the crystal surface, the linear EO effect in PMA₂PbCl₄ is reported and its EO coefficient is determined to be 1.40 pm V^?1. This is the first demonstration of this effect in hybrid metal halide perovskites, materials that feature both highly ordered crystalline structures and solution processability. The in‐plane birefringence and electro‐optic response reveal that layered perovskite crystals could be further explored for potential applications in polarizing optics and EO modulation.     

Perovskite-Derivative Valleytronics

Halide perovskites are revolutionizing the renewable energy sector owing to their high photovoltaic efficiency, low manufacturing cost, and flexibility. Their remarkable mobility and long carrier lifetime are also valuable for information technology, but fundamental challenges like poor stability under an electric field prevent realistic applications of halide perovskites in electronics. Here, it is discovered that valleytronics is a promising route to leverage the advantages of halide perovskites and derivatives for information storage and processing. The synthesized all-inorganic lead-free perovskite derivative, Cs₃Bi₂I₉, exhibits strong light–matter interaction and parity-dependent optically addressable valley degree of freedom. Robust optical helicity in all odd-layer-number crystals with inversion symmetry breaking is observed, indicating excitonic coherence extending well beyond 11 layers. The excellent optical and valley properties of Cs₃Bi₂I₉ arise from the unique parallel bands, according to first principles calculations. This discovery points to new materials design principles for scalable valleytronic devices and demonstrates the promise of perovskite derivatives beyond energy applications.     

A Review on Organic–Inorganic Halide Perovskite Photodetectors: Device Engineering and Fundamental Physics

The last eight years (2009–2017) have seen an explosive growth of interest in organic–inorganic halide perovskites in the research communities of photovoltaics and light‐emitting diodes. In addition, recent advancements have demonstrated that this type of perovskite has a great potential in the technology of light‐signal detection with a comparable performance to commercially available crystalline Si and III–V photodetectors. The contemporary growth of state‐of‐the‐art multifunctional perovskites in the field of light‐signal detection has benefited from its outstanding intrinsic optoelectronic properties, including photoinduced polarization, high drift mobilities, and effective charge collection, which are excellent for this application. Photoactive perovskite semiconductors combine effective light absorption, allowing detection of a wide range of electromagnetic waves from ultraviolet and visible, to the near‐infrared region, with low‐cost solution processability and good photon yield. This class of semiconductor might empower breakthrough photodetector technology in the field of imaging, optical communications, and biomedical sensing. Therefore, here, the focus is specifically on the critical understanding of materials synthesis, design, and engineering for the next‐stage development of perovskite photodetectors and highlighting the current challenges in the field, which need to be further studied in the future.     

Halide Perovskites for Nonlinear Optics

Halide perovskites provide an ideal platform for engineering highly promising semiconductor materials for a wide range of applications in optoelectronic devices, such as photovoltaics, light-emitting diodes, photodetectors, and lasers. More recently, increasing research efforts have been directed toward the nonlinear optical properties of halide perovskites because of their unique chemical and electronic properties, which are of crucial importance for advancing their applications in next-generation photonic devices. Here, the current state of the art in the field of nonlinear optics (NLO) in halide perovskite materials is reviewed. Halide perovskites are categorized into hybrid organic/inorganic and pure inorganic ones, and their second-, third-, and higher-order NLO properties are summarized. The performance of halide perovskite materials in NLO devices such as upconversion lasers and ultrafast laser modulators is analyzed. Several potential perspectives and research directions of these promising materials for nonlinear optics are presented.