Structural,elastic, thermodynamic and electronic properties of LuX (X = N,Bi and Sb) compounds: first principles calculations

ABSTRACT

The structural, electronic, elastic and thermodynamic properties of LuX (X = N, Bi and Sb) based on rare earth into phases, Rocksalt (B1) and CsCl (B2) have been investigated using full-potential linearized muffin-tin orbital method (FP-LMTO) within density functional theory. Local density approximation (LDA) for exchange-correlation potential and local spin density approximation (LSDA) are employed. The structural parameters as lattice parameters a₀, bulk modulus B, its pressure derivate B’ and cut-off energy (E_c) within LDA and LSDA are presented. The elastic constants were derived from the stress–strain relation at 0 K. The thermodynamic properties for LuX using the quasi-harmonic Debye model are studied. The temperature and pressure variation of volume, bulk modulus, thermal expansion coefficient, heat capacities, Debye temperature and Gibbs free energy at different pressures (0–50 GPa) and temperatures (0–1600 K) are predicted. The calculated results are in accordance with other data.     

Pressure effects on structural,elastic and electronic properties of BaZnO2: first-principles study

The structural, elastic and electronic properties of BaZnO₂ under pressure are investigated by the plane wave pseudopotential density functional theory (DFT). The calculated lattice parameters and unit cell volume of BaZnO₂ at the ground state are in good agreement with the available experimental data and other theoretical data. The pressure dependences of elastic constants C_ij, bulk modulus B, shear modulus G, B/G, Poisson’ s ratio σ, Debye temperature Θ and aggregate acoustic velocities V_P and V_S are systematically investigated. It is shown that BaZnO₂ maintains ductile properties under the applied pressures. Analysis for the calculated elastic constants has been made to reveal the mechanical stability and mechanical anisotropy of BaZnO₂. At the ground state, the calculated compressional and shear wave velocities are 8.26 km/s and 1.81 km/s, respectively, and the Debye temperature Θ is 240.8 K. The pressure dependences of the density of states and the bonding property of BaZnO₂ are also investigated.     

Structural,elastic, electronic and optical properties of platinum-based superconductor SrPt3P under pressure: a first-principles study

The structural, elastic, electronic and optical properties of the platinum-based superconductor SrPt₃P under pressure are investigated by the generalized gradient approximation with the Perdew–Burke–Ernzerhof exchange-correlation functional in the framework of density-functional theory. The calculated structural parameters (a, c) and the primitive cell volume V of SrPt₃P at the ground state are in good agreement with the available experimental data and seem to be better than other calculated results. The pressure dependences of the elastic constants \mathop C\nolimits_{ij}, bulk modulus B, shear modulus G, Young’s modulus E and Poisson’s ratio σ of SrPt₃P are also obtained successfully. The computed elastic constants indicate that SrPt₃P is mechanically stable up to 100 GPa. The obtained B/G is 2.56 at the ground state, indicating that SrPt₃P behaves in a ductile manner. The ratio B/G also increases with growing pressures, indicating that the structure becomes more and more ductile. Even though SrPt₃P is an ionic-covalent crystal, the obtained density of states shows that it has metallic characteristic. These conclusions can be further demonstrated by analysing the charge and Mulliken population. In addition, we have investigated the dielectric function and the loss function. It is found that the dielectric function in (E||x, E||y) is isotropic, whereas the directions (E||x, E||z) are anisotropic; the effect of pressure on the loss function of the deep ultraviolet region gradually increases as the pressure increases.     

First-principles study of structural,elastic, electronic and thermodynamic properties of topological insulator Bi2Se3 under pressure

The structural, elastic, electronic and thermodynamic properties of the rhombohedral topological insulator Bi₂Se₃ are investigated by the generalized gradient approximation (GGA) with the Wu–Cohen (WC) exchange-correlation functional. The calculated lattice constants agree well with the available experimental and other theoretical data. Our GGA calculations indicate that Bi₂Se₃ is a 3D topological insulator with a band gap of 0.287 eV, which are well consistent with the experimental value of 0.3 eV. The pressure dependence of the elastic constants C_ij, bulk modulus B, shear modulus G, Young’s modulus E, and Poisson’s ratio σ of Bi₂Se₃ are also obtained successfully. The bulk modulus obtained from elastic constants is 53.5 GPa, which agrees well with the experimental value of 53 GPa. We also investigate the shear sound velocity V_S, longitudinal sound velocity V_L, and Debye temperature Θ_E from our elastic constants, as well as the thermodynamic properties from quasi-harmonic Debye model. We obtain that the heat capacity C_v and the thermal expansion coefficient α at 0 GPa and 300 K are 120.78 J mol^?1 K^?1 and 4.70 × 10^?5 K^?1, respectively.     

Pressure effect on structural,electronic and thermodynamic investigations of europium filled skutterudite EuFe4Sb12: LDA and LSDA approximations

Numerical calculations based on the full potential muffin-tin orbitals method (FP-LMTO) within the local density approximation (LDA) and the local spin-density approximation (LSDA) to investigate the structural, electronic and thermodynamic properties of filled skutterudite EuFe₄Sb₁₂ are presented. The electronic band structure and density of states profiles prove that this material is a conductor. The present investigation is also extended to the elastic constants, such as the bulk modulus B, anisotropy factor A, shear modulus G, young's modulus E, Poisson's ratio ν, and the B/G ratio with pressure in the range of 0–40 GPa. The sound velocities and Debye temperatures are also predicted from the above constants. The variations of the primitive cell volume, expansion coefficient α, bulk modulus B, heat capacity (C_p and C_v), Debye temperature θ_D, Helmholtz free energy A, Gibbs free energy G, entropy S, and internal energy U with pressure and temperature in the range 0–3000 K are calculated successfully.     

Structural,elastic, electronic and thermal properties of M2SbP (M = Ti,Zr and Hf)

The structural, elastic, electronic and thermal properties of M₂SbP (M = Ti, Zr and Hf) were studied by means of a pseudo-potential plane-wave method based on the density functional theory within both the local density approximation and the generalised gradient approximation. The optimised zero-pressure geometrical parameters, i.e. the two unit cell lengths (a, c) and the internal coordinate (z), were in good agreement with available experimental and theoretical data. The effect of high pressure, up to 20 GPa, on the lattice constants shows that the contractions along the a-axis were higher than along c-axis. The anisotropic independent elastic constants were calculated using the static finite strain technique. Numerical estimations of the bulk modulus, shear modulus, Young's modulus, Poisson's ratio, average sound velocity and Debye temperature for ideal polycrystalline M₂SbP aggregates were performed in the framework of the Voigt–Reuss–Hill approximation. The calculated band structures show that all studied materials are electrical conductors. Analysis of the atomic site projected densities showed that the bonding is of covalent–ionic nature with the presence of metallic character. The density of states at the Fermi level is dictated by the transition metal d–d bands; the Sb element has little effect. Thermal effects on some macroscopic properties of M₂SbP were predicted using the quasi-harmonic Debye model, in which the lattice vibrations are taken into account. The variations of the volume expansion coefficient, heat capacity and Debye temperature with pressure and temperature in the ranges 0–50 GPa and 0–2000 K were obtained successfully.     

First-principles study of elastic and electronic properties of layered ternary nitride SrZrN2 under pressure

The structural, elastic, and electronic properties of SrZrN₂ under pressure up to 100?GPa have been carried out with first-principles calculations based on density functional theory. The calculated lattice parameters at 0?GPa and 0?K by using the GGA-PW91-ultrasoft method are in good agreement with the available experimental data and other previous theoretical calculations. The pressure dependence of the elastic constants and the elastic-dependent properties of SrZrN₂, such as bulk modulus B, shear modulus G, Young's modulus E, Debye temperature Θ, shear and longitudinal wave velocity V_S and V_L, are also successfully obtained. It is found that all elastic constants increase monotonically with pressure. When the pressure increases up to 140?GPa, the obtained elastic constants do not satisfy the mechanical stability criteria and a phase transition might has occurred. Moreover, the anisotropy of the directional-dependent Young's modulus and the linear compressibility under different pressures are analysed for the first time. Finally, the pressure dependence of the total and partial densities of states and the bonding property of SrZrN₂ are also investigated.     

First-principles investigations on elastic, phonon and thermodynamic properties of SrB6 under pressure

The elastic, phonon and thermodynamic properties of the divalent alkaline-earth hexaboride SrB₆ are investigated by using plane-wave pseudopotential density functional theory method. The calculated structure parameters and bulk modulus are well consistent with the available experiment and theoretical data. The pressure dependences of elastic constants C_ij, bulk modulus B₀, shear modulus G, Young's modulus E and Poisson's ratio σ are also presented. With these elastic parameters, we investigate the mechanical stability and compressibility of SrB₆. For the thermodynamic properties, both phonon and quasi-harmonic Debye model methods are adopted. Through the comparison with experimental and other theoretical results, we found the method of quasi-harmonic Debye model is a little better. Moreover, the phonon dispersion relations are also obtained. It is found that there are two LO/TO splitting around 5 THz and 26 THz, respectively.     

Predictions of mechanical and thermodynamic properties of Mg17Al12 and Mg2Sn from first-principles calculations

Using first-principles calculations, we predict mechanical and thermodynamic properties of both Mg₁₇Al₁₂ and Mg₂Sn precipitates in Mg–Al–Sn alloys. The elastic properties including the polycrystalline bulk modulus, shear modulus, Young’s modulus, Lame’s coefficients and Poisson’s ratio of both Mg₁₇Al₁₂ and Mg₂Sn phases are determined with the Voigt–Reuss–Hill approximation. Our results of equilibrium lattice constants agree closely with previous experimental and other theoretical results. The ductility and brittleness of the two phases are characterized with the estimation from Cauchy pressure and the value of B/G. Mechanical anisotropy is characterized by the anisotropic factors and direction-dependent Young’s modulus. The higher Debye temperature of Mg₁₇Al₁₂ phase means that it has a higher thermal conductivity and strength of chemical bonding relative to Mg₂Sn. The anisotropic sound velocities also indicate the elastic anisotropies of both phase structures. Additionally, density of states and Mulliken population analysis are performed to reveal the bonding nature of both phases. The calculations associated with phonon properties indicate the dynamical stability of both phase structures. The temperature dependences of thermodynamic properties of the two phases are predicted via the quasi-harmonic approximation.     

Ab initio investigation of the structural,elastic and electronic properties of the anti-perovskite TlNCa3

We have investigated the structural, elastic and electronic properties of the anti-perovskite TlNCa₃ using ab initio calculations within the generalized gradient approximation and the local density approximation for the exchange–correlation potential. The lattice constant, bulk modulus, elastic constants and their pressure dependence, energy band structures, density of states and charge density distribution are calculated and analyzed in comparison with the available experimental and theoretical data. The bulk modulus, shear modulus, Young’s modulus, Poisson’s ratio, Lamé’s coefficients, average sound velocity and Debye temperature are numerically estimated for ideal polycrystalline TlNCa₃ aggregates in the framework of the Voigt–Reuss–Hill approximation. This is the first theoretical prediction of the elastic constants and their related properties for TlNCa₃ that requires experimental confirmation.     

Ab initio studies of the structural,elastic, electronic and thermal properties of NiTi2 intermetallic

First principles calculations were performed in the framework of the density functional theory (DFT) using the Full Potential–Linear Augment Plane Wave method (FP–LAPW) within the generalized gradient approximation (GGA) to predict the structural, electronic, elastic and thermal properties of NiTi₂ intermetallic compound. By using the Wien2k all-electron code, calculations of the ground state and electronic properties such as lattice constants, bulk modulus, presure derivative of bulk modulus, total energies and density of states were also included. The elastic constants and mechanical properties such as Poisson’s ratio, Young’s modulus and shear modulus are estimated from the calculated elastic constants of the single crystal. Through the quasi-harmonic Debye model, the preasure and temperature dependences of the linear expansion coefficient, bulk modulus and heat capacity have been investigated. Finally, the Debye temperature has been estimated from the average sound velocity according to the predicted polycrystal bulk properties and from the single crystal elastic constants.     

Theoretical study on the phase stability,elasticity, hardness and electronic structures of Ni–P compounds

A systematic investigation concerned with phase stability, elastic properties, hardness and relevant electronic structure of Ni–P compounds (Ni₃P, Ni₁₂P₅, Ni₂P, Ni₅P₄, NiP, NiP₂ and NiP₃) was carried out using first principles calculations. The calculated results show that the Ni–P compounds have strong hardness, ranging from 7.80–14.54 GPa. Also, the hardness values gradually increase with the P content. Electronic structure analysis shows that the strong Ni–P and part of P–P hybrid orbitals play important roles in the hardness of these compounds. The calculated elastic constants indicated that the Ni₃P, Ni₁₂P₅ and NiP₂ phases are significantly anisotropic, the NiP and Ni₂P exhibit some anisotropy, while the Ni₅P₄ and NiP₃ show a relatively isotropic character. At last, the properties of these Ni–P compounds including lattice constants, thermodynamic stability, elastic constants C_ij, bulk modulus B, shear modulus G, Young's modulus E and Poisson's ratio ν have been calculated.     

高压下TiC的弹性、电子结构及热力学性质的第一性原理计算

利用基于密度泛函理论的第一性原理平面波赝势方法 并结合准谐徳拜模型研究了NaCl结构的TiC在高压下的弹性性质、电子结构和热力学性质. 计算所得零温零压下的晶格常数、体弹模量及弹性常数与实验值符合得很好. 零温下弹性常数和弹性模量随压强增大而增大. 通过态密度和电荷密度的分析, Ti-C键随压强增大而增强. 运用准谐德拜模型, 成功计算了TiC在高温高压下的体弹模量、熵、热膨胀系数、徳拜温度、 Grüneisen参数和比热容. 结果表明压强对体弹模量、热膨胀系数和徳拜温度的影响大于温度对其的影响. 热容随着压强升高而减小, 在高温高压下, 热容接近Dulong-Petit极限.     

Elastic,mechanical, electronic properties and hardness of Nb2AsC from first principles

The study aims at the elastic, mechanical, electronic properties and hardness of Nb₂AsC using first principles based on the density functional theory method within the generalised gradient approximation. The calculated lattice parameters of Nb₂AsC are in good agreement with the experimental data. The five independent elastic constants are firstly calculated as a function of pressure, and our results indicate that it is mechanically stable in the applied pressure. The elastic anisotropy is examined through the computation of the direction dependence of Young's modulus. The pressure dependences of the bulk modulus, shear modulus, average velocity of acoustic waves and Debye temperature of Nb₂AsC are systematically investigated. The band structure and density of states are discussed, and the results show that the strong hybridisations C p–Nb d and As p–Nb d would be beneficial to the structure stability of Nb₂AsC. Based on the Mulliken population analysis, the hardness of Nb₂AsC is predicted.     

Theoretical investigations of structural, elastic and thermodynamic properties for PtN2 under high pressure

We have investigated structural and elastic properties of PtN₂ under high pressures using norm-conserving pseudopotentials within the local density approximation (LDA) in the frame of density-functional theory. Calculated results of PtN₂ are in agreement with experimental and available theoretical values. The a/a₀, V/V₀, ductility/brittleness, elastic constants C_ij, shear modulus C′, bulk modulus B, shear modulus G, Young's modulus E, Poisson's ratio σ and anisotropy factor A as a function of applied pressure are presented. Through the quasi-harmonic Debye model, we also study thermodynamic properties of PtN₂. The thermal expansion versus temperature and pressure, thermodynamic parameters X (X=Debye temperature or specific heat) with varying pressure P, and heat capacity of PtN₂ at various pressures and temperatures are estimated.     

Investigations of phase transition, elastic and thermodynamic properties of GaP by using the density functional theory

The phase transition of gallium phosphide (GaP) from zinc-blende (ZB) to a rocksalt (RS) structure is investigated by the plane-wave pseudopotential density functional theory (DFT). Lattice constant a₀, elastic constants c_ij, bulk modulus B₀ and the pressure derivative of bulk modulus B₀' are calculated. The results are in good agreement with numerous experimental and theoretical data. From the usual condition of equal enthalpies, the phase transition from the ZB to the RS structure occurs at 21.9 GPa, which is close to the experimental value of 22.0 GPa. The elastic properties of GaP with the ZB structure in a pressure range from 0 GPa to 21.9 GPa and those of the RS structure in a pressure range of pressures from 21.9 GPa to 40 GPa are obtained. According to the quasi-harmonic Debye model, in which the phononic effects are considered, the normalized volume V/V₀, the Debye temperature θ, the heat capacity C_v and the thermal expansion coefficient α are also discussed in a pressure range from 0 GPa to 40 GPa and a temperature range from 0 K to 1500 K.     

Elastic and thermodynamic properties of CaB6 under pressure from first principles

The elastic and thermodynamic properties of CsCl-type structure CaB₆ under high pressure are investigated by first-principles calculations based on plane-wave pseudopotential density functional theory method within the generalized gradient approximation (GGA). The calculated lattice parameters of CaB₆ under zero pressure and zero temperature are in good agreement with the existing experimental data and other theoretical data. The pressure dependences of the elastic constants, bulk modulus B (GPa), and its pressure derivative B′, shear modulus G, Young's modulus E, elastic Debye temperature Θ_B, Zener's anisotropy parameter A, Poisson ratios σ, and Kleinmann parameter ζ are also presented. An analysis for the calculated elastic constants has been made to reveal the mechanical stability of CaB₆ up to 100 GPa. The thermodynamic properties of the CsCl-type structure CaB₆ are predicted using the quasi-harmonic Debye model. The pressure-volume-temperature (P-V-T) relationship, the variations of the heat capacity C_V, Debye temperature Θ_D, and the thermal expansion α with pressure P and temperature T, as well as the Grüneisen parameters γ are obtained systematically in the ranges of 0-100 GPa and 0-2000 K.     

α-Ti2Zr高压物性的第一性原理计算研究

基于密度泛函理论的第一性原理计算获得了α-Ti₂Zr的晶体结构、弹性常数、德拜温度和电子分布情况, 研究了它们与压力的关系. 计算得到的晶体结构参数与实验值一致. 运用有限应变方法计算得到了α-Ti₂Zr的体积模量B、剪切模量G、杨氏模量E和泊松比σ. B和E的零压值分别为101.2和35.6 GPa. G/B的值较小, 并且随着压力的增加而减小, 表明α-Ti₂Zr具有优异的延展性. 基于弹性常数得到平均声速, 从而获得了德拜温度Θ=321.7 K. 通过解Christoffel方程获得的压缩波和剪切波数据揭示α-Ti₂Zr具有较强的各向异性. 此外, 压力诱导电子从s轨道到d轨道的转移说明在一定压力下α-Ti₂Zr将转变为β相. 关键词： 第一性原理 α-Ti₂Zr')" href="#">α-Ti₂Zr 物性 高压     

Structural and elastic properties of LaTiO3 under pressure

We investigate the structural and elastic properties of LaTiO₃ by the plane-wave pseudopotential density functional theory method. The lattice constants, bulk modulus and its pressure derivative are obtained. These properties in the equilibrium phase are well consistent with the available experimental data. The pressure dependence of the elastic constants, ductility, mechanical stabilities, sound velocity and Debye temperatures are investigated for the first time. From the ratio G/B, we conclude that LaTiO₃ is ductile at 0 GPa and becomes more ductile at high pressure. In addition, the anisotropy factors for every symmetry plane and axis as well as linear bulk modulus at diverse pressures have been obtained.     

Structural parameters, electronic structures, elastic stiffness and thermal properties of M2PC (M=V, Nb, Ta)

Using pseudo-potential plane-wave method based on the density functional theory in conjunction with the generalized gradient approximation, structural parameters, electronic structures, elastic stiffness and thermal properties of M₂PC, with M=V, Nb, Ta, were studied. The optimized zero pressure geometrical parameters are in good agreement with the available results. Pressure effect, up to 20 GPa, on the lattice parameters was investigated. Electronic properties are studied throughout the calculation of densities of states and band structures. The elastic constants and their pressure dependence were predicted using the static finite strain technique. We performed numerical estimations of the bulk modulus, shear modulus, Young's modulus, Poisson's ratio and average sound velocity for ideal polycrystalline M₂PC aggregates in framework of the Voigt-Reuss-Hill approximation. We estimated the Debye temperature and the theoretical minimum thermal conductivity of M₂PC.