水溶性聚合物和两亲聚合物18．2－丙烯酰胺基烷磺酸类两亲单体

２－丙烯酰胺基烷磺酸的溶解行为和胶体化学性质明显随烷基长短而异。由于手性碳原子的存在，与其相邻亚甲基的质子峰在~１ＨＮＭＲ谱上清楚地发生分裂。研究了２－丙烯酰胺基十六烷磺酸（ＡＭＣ１６Ｓ）在水／二氧六环混合溶剂中的聚合动力学和胶体化学性质。发现聚合速度和所得聚合物分子量均在水／二氧六环体积比为１～１／２时出现最小值，临界胶束浓度随混合溶剂中二氧六环含量的增加而增加，当水／二氧六环体积比为１／２～１／４时，观察不到胶束化现象。     

水溶性聚合物和两亲聚合物18.2—丙烯酰胺基烷磺酸类两亲单体

２－丙烯酰胺基烷磺酸的溶解行为和胶体化学性质明显随烷基长短而异，由于手性碳原子的存在，与其相邻亚甲基的质子峰在ＨＮＭＲ谱上清楚地发生分裂，研究了２－丙烯酰胺基十六烷磺酸（ＡＭＣ１６Ｓ）在水／二氧六环混合溶剂中的聚合动力学和胶体化化学性质，发现聚合速度和所得聚合物分子量均均在水／二氧六环体积比为１～１／２时出现最小值，临界胶束浓度随混合溶剂中二氧六环含量的增加而增加，当水／二氧六环体积比为１／２～１     

活性炭的改性研究及对四环素的吸附

研究了改性对活性炭的物理化学性质及其对四环素吸附性能的影响。结果发现,硝酸氧化改性可增加活性炭表面的酸性基团,提高比表面亲水性,降低pHPZC值,同时也改变了活性炭的表面微观形貌。低温、低浓度硝酸氧化改性,增加了活性炭的比表面积,对四环素的吸附以物理吸附为主。高温氧化改性使得比表面积降低,酸性基团增加,且吸附容量与活性炭比表面积、表面总酸度呈一定的线性关系。     

丙酸水相加氢反应中Ru负载量对C—C键断裂的影响

考察了(1.0%、4.0%、6.0%)Ru/ZrO2催化剂的丙酸水相加氢性能.采用N2物理吸附、CO脉冲化学吸附、H2程序升温还原(H2-TPR)、CO和丙酸吸附傅里叶变换红外光谱(FTIR)研究了Ru/ZrO2催化剂的物理化学性质.COFTIR表明,Ru负载量增加,催化剂表面Ru粒子的富电子程度增加,更接近金属Ru的本征特性.丙酸FTIR表明,丙酸分子在Ru/ZrO2催化剂表面经解离吸附主要形成丙酰基和丙酸盐物种.随Ru含量增加,丙酰基更容易发生脱羰反应,导致C—C键断裂.     

Ni2 在炭包覆氧化铝表面存在状态及加氢性能

采用等体积浸渍法制备了以炭包覆氧化铝(CCA)为载体的Ni基催化剂.利用低温N2物理吸附、XRD、UV-Vis DRS、H2-TPR、H2-TPD等手段对催化剂进行表征,并考察了催化剂粗1,4-丁二醇加氢反应性能.结果表明,均匀分散在表面的炭可以有效阻止Ni2+进入氧化铝表面四面体及八面体空位,Ni2+以与载体具有中等强度相互作用的物种形式存在.随Ni含量的增加,镍物种晶粒尺寸发生明显变化,当Ni含量低于10%时,NiO以高分散状态存在于载体表面,Ni含量达到14%时催化剂中出现了NiO微晶,进一步提高Ni含量,NiO晶粒尺寸有所长大,但仍保持了较高的分散度.由于Ni的聚集程度较小,随着Ni含量增加,Ni的总活性比表面积增加,催化剂加氢活性提高,至Ni含量达17%时,催化剂表现出最佳的催化加氢活性.     

Dispersion of Ni^（2＋） Supported on Carbon Covered Alumina Surface and Hydrogenation Performance

采用等体积浸渍法制备了以炭包覆氧化铝（CCA）为载体的Ni基催化剂.利用低温N2物理吸附、XRD、UV-Vis DRS、H2-TPR、H2-TPD等手段对催化剂进行表征,并考察了催化剂粗1,4-丁二醇加氢反应性能.结果表明,均匀分散在表面的炭可以有效阻止Ni2＋进入氧化铝表面四面体及八面体空位,Ni2＋以与载体具有中等强度相互作用的物种形式存在.随Ni含量的增加,镍物种晶粒尺寸发生明显变化,当Ni含量低于10%时,NiO以高分散状态存在于载体表面,Ni含量达到14%时催化剂中出现了NiO微晶,进一步提高Ni含量,NiO晶粒尺寸有所长大,但仍保持了较高的分散度.由于Ni的聚集程度较小,随着Ni含量增加,Ni的总活性比表面积增加,催化剂加氢活性提高,至Ni含量达17%时,催化剂表现出最佳的催化加氢活性.     

一种新的结构参数用于卤化物的QSPR研究

基于邻接矩阵和原子特征值（ｔｉ）建立一种新的结构参数（＾１Ｑ），它对无机分子具有良好的区分能力，并且计算简单，＾１Ｑ用于ＡＸｋ（ｋ＝１，２，３，４）型卤化物的标准生成焓、晶格能、反应截面等物理化学性质的相关性研究，获得了优于文献方法的结果。     

ZnO包覆LiNi_(1/3)Co_(1/3)Mn_(1/3)O_2的表面结构和电化学性能

在LiNi1/3Co1/3Mn1/3O2正极材料表面包覆ZnO,通过X射线衍射(XRD)和光电子能谱(XPS)分析包覆层对正极材料表面状态的改变,并考察了改性后材料的放电容量、首次不可逆容量等电化学性能变化.结果表明:ZnO主要存在于材料表面并影响着材料表面组成和电化学性质,材料表面镍和锰的含量随着包覆量的增加而增大;400oC热处理可使过渡金属与锌在材料表面形成复合氧化物,过渡金属的结合能增大;包覆2%(by mass,下同)的ZnO可有效抑制55 oC下充放电时3.6 V附近的不可逆反应,提高了材料的首次库仑效率;包覆2%ZnO的电池材料在55oC/0.5C的放电比容量和循环寿命最佳.     

氧化铜与CeO2-γ-Al2O3混合氧化物载体之间的表面相互作用

 采用XRD，XPS和TPR等手段研究了氧化铜与二氧化铈－氧化铝机械混合载体之间的表面相互作用．结果表明，在混合载体表面，当氧化铜的负载量低于其在二氧化铈载体上的分散容量时，氧化铜优先与二氧化铈发生作用并分散在其表面；当氧化铜的负载量超过其在二氧化铈载体上的分散容量时，氧化铜会继续在氧化铝表面分散．这些结果说明，在制备用氧化铈改性载体的负载型催化剂时，如果氧化铈的用量偏高，会导致样品中有晶相氧化铈生成，从而对氧化铈作为改性剂的作用不利．     

锆-铝复合氧化物的制备及酸腐蚀对其表面性质的影响

利用溶胶－凝胶技术制备了ZrO2-Al2O3复合氧化物,考察了不同的投料比时复合氧化物的物理化学性质,比较了不同浓度酸腐蚀前后氧化物微球的比表面积、孔径、表面酸碱性及复合氧化物中氧化锆、氧化铝摩尔比等物理化学参数的变化。     

Seeded-growth approach to fabrication of silver nanoparticle films on silicon for electrochemical ATR surface-enhanced IR absorption spectroscopy

Ag nanoparticle films (simplified as nanofilms hereafter) on Si for electrochemical ATR surface enhanced IR absorption spectroscopy (ATR-SEIRAS) have been successfully fabricated by using chemical deposition, which incorporates initial embedding of Ag seeds on the reflecting plane of an ATR Si prism and subsequent chemical plating of conductive and SEIRA-active Ag nanofilms. Two alternative methods for embedding initial Ag seeds have been developed: one is based on self-assembly of Ag colloids on an aminosilanized Si surface, whereas the other the reduction of Ag+ in a HF-containing solution. A modified silver-mirror reaction was employed for further growth of Ag seeds into Ag nanofilm electrodes with a theoretically average thickness of 40-50 nm. Both Ag seeds and as-deposited Ag nanofilms display island structure morphologies facilitating SEIRA, as revealed by AFM imaging. The cyclic voltammetric feature of the as-prepared Ag nanofilm electrodes is close to that of a polycrystalline bulk Ag electrode. With thiocyanate as a surface probe, enhancement factors of ca. 50-80 were estimated for the as-deposited Ag nanofilms as compared to a mechanically polished Ag electrode in the conventional IRAS after reasonable calibration of surface roughness factor, incident angles, surface coverage, and polarization states. As a preliminary example for extended application, the pyridine adsorption configuration at an as-deposited Ag electrode was re-examined by ATR-SEIRAS. The results revealed that pyridine molecules are bound via N end to the Ag electrode with its ring plane perpendicular or slightly tilted to the local surface without rotating its C2 axis about the surface normal, consistent with the conclusion drawn by SERS in the literature.     

Recent results on the dynamic response of precipitate-based ion-selective electrodes

The e.m.f. vs. time curves of the precipitate-based ion-selective electrodes have been interpreted mathematically on the basis of the desolvation of ions at the electrode surface. A new method has been suggested for the characterization of ion-selective electrodes by the half-life time of the first-order desolvation reaction.     

Electrochemical Impedance Analysis of Thermogalvanic Cells

Thermogalvanic cells(also known as thermo-electrochemical cells) that convert waste heat energy to electricity are a new type of energy conversion device. However, the electron transfer kinetics and mass transfer of redox couples have not been thoroughly studied. Here, the ion reaction and charge transport in thermogalvanic cells are investigated by electrochemical impedance analysis. We first propose the detailed impedance model followed experimental verification on three types of electrode materials. Parameters including kinetic rate constants and ion diffusion coefficients for the electrodes are obtained by fitting the impedance data. Our study shows explicitly that impedance analysis can provide useful information on selecting suitable electrode materials for thermogalvanic cells.     

Voltammetry at partially covered electrodes: Part I. Chronopotentiometry and chronoamperometry at model electrodes

Equations for chronopotentiometry and chronoamperometry at partially covered electrodes have been derived using a model of hexagonal array of cylidrical spaces terminated, at the electrode surface, by concentric active and inactive regions. The boundary value problem was shown to be analogous to that for a charge transfer preceded by a chemical reaction. Experiments with the reduction of ferricyanide on gold model electrodes partially covered with photoresist layer showed excellent agreement with the theory. Application of the equations to estimation of coverage and size of active sites distributed on a electrode surface is discussed.     

等离子体聚合法修饰半导体光电极的研究——聚丙烯腈/n-GaAs,n-GaP电极

Polyacrylonitrile (PAN) film attached to n-GaAs, n-GaP photoelectrode surface by plasma polymerization has been studied. Both electrochemical behaviors and stability of the modified electrodes have been investigated. The results showed that the semiconductor electrodes with PAN film decreased photocorrosion in a certain degree, and their electrochemical characteristics and stability were improved remarkably after plasma doping. Cyclic voltammetric analysis demonstrated that the redox reaction occurred in I-PAN films could be carried out rapidly on electrode surfaces, in favor of the capture and transfer of photoinduced holes by the films to redox couples in solution.     

ELECTROCHEMISTRY OF EXCITED MOLECULES: PHOTO-ELECTROCHEMICAL REACTIONS OF CHLOROPHYLLS*

Abstract— Semiconductors with a sufficiently large energy gap, in contact with an electrolyte, can be used as electrodes for the study of electrochemical reactions of excited molecules. The behavior of excited chlorophyll molecules at single crystal ZnO-electrodes has been investigated. These molecules inject electrons from excited levels into the conduction band of the electrode, thus giving rise to an anodic photocurrent. The influence of various agents on this electron transfer has been studied. In the presence of suitable electron donors (e.g., hydroquinone, phenylhydrazine) in the electrolyte chlorophyll molecules, absorbing quanta, mediate the pumping of electrons from levels of the reducing agents into the conduction band of the semiconductor-electron acceptor. The electron capture by the semiconductor electrode is irreversible, when an adequate electrochemical gradient is provided in the electrode surface. Some properties of excited chlorophyll at semiconductor electrodes (unidirectional electron transfer, highly efficient charge separation, chlorophyll as electron pump and able to convert electronic excitation into electric energy) show similarity to the behavior of chlorophyll in photosynthetic reaction centers.     

Pt电极上Sb，S吸附原子对正丁醇电催化氧化性能的影响

运用电化学循环伏安和石英晶体微天平研究了0.1 mol/L H2SO4 溶液中正丁醇（1-BL）在Pt电极和以Sb，S吸附原子修饰的Pt（Pt/Sbad和Pt/Sad）电极上电催化氧化过程。从电极表面质量变化表明正丁醇的氧化与电极表面氧物种有着极其密切的关系。Pt电极表面Sb吸附原子能在较低的电位下吸附氧，可显著提高正丁醇电催化氧化活性。与Pt电极相比较，Sb吸附原子修饰的Pt电极使正丁醇氧化的峰电位负移了0.33 V，峰电流增大了近一倍。相反，Pt电极表面S吸附原子的氧化会消耗表面氧物种，抑制了正丁醇的电氧化。本文从表面质量变化提供了吸附原子电催化作用的新数据。     

Poly(aniline) solid contact ion selective electrode for udenafil

Udenafil is an oral agent for treating male erectile dysfunction. The poly(aniline) solid contact selective electrodes for udenafil have been fabricated from PVC cocktail solutions with three ion selective ion pairs. This solid contact electrode contains three layers of Pt/electro-conductive poly(aniline) polymer/PVC film with an ionophore with a thickness of 2.5 ± 0.1 mm. We compared the slopes of EMF responses and the response range of a solid contact electrode based on Udenafil-TmCIPB ion pair with those based on Udenafil-PMA and Udenafil-TPB ion pairs and showed that the response slopes were influenced by plasticizers. The EMF response slopes of Udenafil-TmCIPB-based solid contact electrodes equalled 58.0 mV/decade (at 20 ± 0.2°C) and their linear response dynamic ranges were 1.0 × 10⁻²∼1.0 × 10^−5.85 M (r ² = 0.9984). When electrodes with 6 different plasticizers based on Udenafil-TmCIPB were compared, as the dielectric constant of PVC plasticizer increased, so was the response slope at the same time. Having applied the electrodes to artificial serum directly, we could get same satisfactory results [Nernstian slope: 60.3 mV/decade, dynamic range: 1.0 × 10⁻²∼1.0 × 10^−5.78 M (r ² = 0.9978) in artificial serum]. Solid contact electrodes with Udenafil-TmCIPB have shown the best selectivity, reproducibility of EMF, long-term stability, and short response time (< 20 s).     

Mechano-elektrochemische Effekte,I. Verschiebung des elektrochemischen Potentials bei plastischer Deformation von Kupfer in wäßrigen Elektrolyten

Potential shifts have been measured in the course of mechanical deformation of copper electrodes in aqueous electrolytes. The potential values depend on the pretreatment of the electrodes, on the composition of the electrolyte and on the rate of deformation. The great influence of the oxygen content on the electrode surface seems evident. The potential values can be interpreted in terms of mixed potentials between an ideal copper electrode reaction and a copper oxide reaction. These findings are, however, not in agreement with the observedpH-stabilities of the electrode surfaces, which extend over apH-range not expected for Cu-Cu₂O-mixtures. It may be anticipated that oxidic superstructures of variable properties are present, which may show semiconductor properties in the immediate surface regions.     

Development of a biofuel cell using glucose-oxidase- and bilirubin-oxidase-based electrodes

Biofuel cells have a tremendous opportunity to provide much higher energy densities and smaller footprints than batteries for powering implantable medical devices, leading to less intrusive implantable devices with longer lifetimes. This paper introduces biofuel cell anode and cathode designs based on mediated glucose oxidation by glucose oxidase and oxygen reduction by bilirubin oxidase, respectively. We report here the progress toward the development of components for biofuel cells working in physiological conditions. We have investigated enzymatic electrode formulations that have the potential to achieve higher current densities and longer stability of the electrodes: (a) high surface area by the use of multiscale carbon materials, (b) immobilization of redox mediator on the electrode surface, and (c) use of a protective biocompatible polymer coating. Part of this work was presented at the 213th Electrochemical Society Meeting as a poster