ITER中国液态锂铅实验包层模块结构热应力数值模拟

使用有限元程序对中国向国际热核实验堆ITER实验包层工作组提交的双功能锂铅实验包层模块(DFLL-TBM)的两种结构设计方案即双冷LiPb包层DLL和单冷准静态LiPb包层SLL进行热应力数值模拟,在包层结构设计、热工水力学设计和中子学计算基础上,给出包层结构温度场和应力场分布,依据ITER高温结构设计标准,进一步对包层高温部件进行力学性能分析.根据这些模拟结果,分析两种结构基本设计方案的合理性和可行性,并作为进一步优化分析的基础.     

聚变实验堆ITER实验包层瞬态热工安全分析

在中国向ITER(International Thermonuclear Experiment Reactor)实验包层工作组提交的双功能锂铅实验包层模块(DFLL-TBM)设计分析的基础上,通过对DFLL-TBM系统相关的瞬态事故如真空室内部冷却剂泄漏、TBM(实验包层模块)内部冷却剂泄漏以及真空室外部冷却剂泄漏事故进行计算分析,评价DFLL-TBM对ITER在热工方面对安全的影响.结果表明:当发生瞬态事故时,DFLL-TBM有能力通过热辐射将余热排出,且包层结构不会熔化.DFLL-TBM可满足ITER在热工方面对安全的要求.     

ITER氚增殖实验包层设计研究进展

国际热核实验反应堆(ITER)为人类开发聚变能提供重要的物理和工程技术实验平台,ITER氚增殖实验包层模块(TBM)技术是必须掌握的关键技术.参与ITER计划的成员国根据本国商用演示堆包层发展策略,分别提出了各自的实验包层概念,以便在ITER运行期间进行实验.本文对ITER-TBM目前已经开展和正在进行的主要设计研究工作进展进行总结,介绍了各方提出的设计方案、支撑设计的相关技术研究进展,以及合作实验窗口的分配现状.     

中国双功能锂铅实验包层系统在ITER赤道窗口的界面设计

中国双功能锂铅实验包层模块(DFLL-TBM)是中国计划在国际热核实验堆(ITER)进行氚增殖包层实验的两个候选概念之一.实验包层系统(TBS)与ITER界面设计关系到TBS能否在ITER装置有限空间内安装和实验,是ITER国际组关注的重点.本文根据ITER对TBS的设计要求、DFLL-TBS概念设计,结合中国与印度TBS在实验窗口的功能、安全和空间分配的定义,利用CATIA三维设计软件进行了DFLL-TBS在ITER窗口塞、管林区、窗口室的界面设计,初步设计可以满足ITER实验窗口空间要求.     

软化热处理与预变形对CLAM钢塑性的影响分析

CLAM钢是中国ITER液态测试包层模块的首选结构材料,其塑性是影响测试包层冷却流道加工制造的关键因素之一。本文对CLAM钢进行退火软化热处理,测试其拉伸性能,并研究经过5%、10%和15%预变形,均分别在600℃、700℃和800℃回火30 min后,CLAM钢塑性的回复情况,以获得预变形量和回火工艺与CLAM钢塑性之间的关系,为制备包层模块及其冷却流道提供材料技术支持。研究表明:退火态CLAM钢塑性较正常热处理态CLAM钢有较大提高,在预变形和回火过程中,其塑性随预变形量的增大而下降,随回火温度的上升而提高。     

ITER中国液态锂铅实验包层模块设计研究与实验策略

在广泛调研和深入分析国际聚变堆包层发展状况的基础上,根据液态锂铅包层一般特点和中国发展的系列液态锂铅包层概念设计,提出了一个具有演示氦气单冷却剂和氦气/锂铅双冷却剂包层技术的双功能包层模块实验系统方案,对其性能进行了分析研究,作为中国向ITER实验包层工作组(TBWG)提交的液态包层实验模块最终设计描述文件的内容框架。总结了该工作主要内容,包括基本设计思想和方案描述、性能分析概况、对辅助系统的要求和实验策略与关键技术等。     

ITER双功能液态锂铅实验包层系统故障模式影响分析

实验包层模块允许放置在ITER中实验的前提是其对ITER的安全以及对工作人员和环境不构成显著影响。ITER要求各参与方的实验包层模块在实验前必须提交安全分析报告,进而获取安全许可证。在中国双功能锂铅实验包层模块(DFLL-TBM)设计基础上,采用了故障模式影响分析(FMEA)方法对DFLL-TBM进行了安全评估与分析,得到所有可能导致严重后果的假设始发事件,验证了确定论安全分析所选择的三个参考事件可以包络所有的假设始发事件。     

中国实验包层模块材料研发进展

聚变堆包层技术是聚变能实现应用的关键技术之一,而材料问题是包层技术的核心问题之一.本文在介绍了目前国际热核聚变实验堆ITER实验包层模块材料选择和中国实验包层模块概念设计中所选材料的性能特点的基础上,重点介绍了国内开展的相关材料研究进展,并阐述了下一步研究中应重点解决的问题.     

ITER中国液态锂铅实验包层模块氦气冷却系统初步设计研究

氦气冷却系统是ITER中国液态锂铅实验包层模块(DFLL-TBM)在ITER装置内进行实验的重要辅助系统.根据ITER运行时的热工条件、安全要求、空间要求,分析了DFLL-TBM氦气冷却系统的功能,确定氦气冷却系统的设计原则和要求,在此基础上给出氦气冷却系统的初步设计方案和设备布置.该氦气系统的特点体现在:双功能,即有宽的裕量满足SLL-TBM和DLL-TBM实验;两条氦气回路共享压力控制单元和氦气净化子系统;旁路设计调节TBM和热交换器氦气的出口温度.     

中国氦冷固态实验包层模块In-box LOCA事故分析研究

中国氦冷固态实验包层模块(CN HCCB TBM)将在ITER 2号窗口进行测试,在测试期间,聚变中子和TBM内部材料发生核反应,产生氚和其他放射性物质。考虑到ITER的运行和工作人员与公众的安全,在进入ITER测试之前需要进行事故安全分析。本文应用MELOCR对HCCB TBM及其氦冷系统(HCS)进行建模,开展了TBM增殖区冷却板流道破口事故(In-box LOCA)安全研究,并对泄压罐体积,破口面积,隔离阀关闭延迟时间等关键参数进行敏感性分析。结果表明:在保守假设流道全破裂的工况下,box压力超过其压力限值4 MPa,而单根流道和5根流道破裂的工况下,box均未超过其压力限值;安装泄压罐和改变隔离阀关闭延迟时间能够有效的控制box压力。     

Preparation of Zn/TiO2 powder and its photocatalytic performance for oxidation of P-nitrophenol

Zn-doped TiO2 catalysts were prepared using a sol-gel method and characterized by XPS,UV-Vis, BET, XRD in this study. Under the irradiation of simulant sunlight, the photocatalytic activity for the degradation of p-nitrophenol was studied too. After irradiation for 2.5 h, the degradation percentage of p-nitrophenol could rise to more than 80 %. The results showed that the spectrum absorption band edge of Zn/TiO2 powder does not broaden obviously comparing with pure TiO2 powder. Zinc exists as Zn （11）. When calcined at 973 K, there is a new phase as ZnTiO3 in Zn/TiO2 catalyst. The order of photocatalytic activity of Zn/TiO2 catalysts calcined at different temperatures for p-nitrophenol is 773 K 〉 673 K 〉 873 K 〉 573 K 〉 973 K and the photocatalytic activity of Zn/TiO2 catalyst calcined at 773 K is better than TiO2 catalysts heated at the same temperature, and outclasses that of commercial TiO2 catalyst. It also showed that the photocatalytic degradation of p-nitrophenol follows first-order kinetics under the irradiation of simulant sunlight.     

Current status of radiation therapy for prostate cancer

Radiotherapy for the treatment of prostate cancer has been extensively explored in the past. Along with the comprehensive understanding of the biology of prostate cancer and rapid advances in terms of technology, the out- come of treatment for the patients with prostate cancer has improved. The authors review radiotherapy as the primary treatment for the disease, with particular emphasis on the technological advances from both the radiobiological and radiophysics aspects. Nonconventional fractionated irradiation like hyper- or hypo-fractionation has been imple- mented in the clinic, the final results still need to be confirmed in the future. Technological advances like IMRT, IGRT, in the last two decades have significantly improved the delivery of external radiotherapy to the prostate. This has re- sulted in an overall increase in the total dose that can be safely delivered to the prostate, which has led to modest im- provements in the biochemical outcome. However, establishing the standard therapy for prostate cancer remains con- troversial. It is hoped that the next decades will bring continued advances in the development of biologicals that will further improve current clinical outcomes.     

水平管内含空气蒸汽强制对流冷凝换热模型研究

为研究含空气蒸汽在水平管内强制对流冷凝换热特性,基于对传热传质过程的分析,建立了管内为环状流与波状流条件下的流动冷凝换热模型。从潜热、显热和液膜3个环节对整个换热过程进行建模,最终得到计算局部冷凝换热系数的理论关系式。模型预测结果与实验数据的对比表明,二者相对偏差在±20%以内,验证了该换热模型的准确性与适用性。通过进一步的研究发现：从换热管入口至出口,随着冷凝的进行,管内换热主要热阻由液膜热阻向气液界面的凝结热阻转变;主流气体对流换热过程基本可忽略。     

Investigations on landmine detection by BF3 detector

Experiments were carried out to investigate the possible use of neutron backscattering for the detection of polyethylene (PE) sample buried in the soil. In detection of landmine by neutrons, the neutron detector and its shield play an important role. In this paper, the effects of graphite, heavy water, polyethylene and boric acid moderators on the flux of back scattered neutrons were investigated. We have also experimentally verified the effect of BF3 detector shield and obtained good agreement with theory.     

Web Services interface of SSRF archive data analysis system

Accelerator database stores various static parameters and real-time data of accelerator. SSRF (Shanghai Synchrotron Radiation Facility) adopts relational database to save the data. We developed a data retrieval system based on XML Web Services for accessing the archive data. It includes a bottom layer interface and an interface applicable for accelerator physics. Client samples exemplifying how to consume the interface are given. The users can browse, retrieve and plot data by the client samples. Also, we give a method to test its stability. The test result and performance are described.     

Assessment of radioactivity levels in some oil samples from the western desert, Egypt

Distributions of natural gamma-emitting radionuclides were determined in 93 oil samples collected from some petroleum fields in the western desert of Egypt. The radioisotope activities in the area under investigation lay in the range of (21 ± 4) to (38 ± 13) Bq?L-1 for 226Ra, (9 ± 2) to (15 ± 5) Bq?L-1 for 232Th, and (154 ± 28) to (303 ± 54) Bq?L-1 for 40K. The mean values were 27, 12, and 201 Bq?L-1, respectively. Among oils, variations in radionuclide ac- tivities could be on account of differences in TDS, HCO3, and Ba, with high or low pH. In this environment, oil prop- erties differently affected the mobilization of natural radionuclides. The range of 226Ra variation had been compared with available data from other countries. The calculated absorbed dose rate ranged from 22.33 to 32.66 nGy?h-1 in lo- cation (B) and (E) respectively, which was less than the accepted value.     

Preparation and properties of 117m Sn(IV)-TTHMP in in-vitro and in small animals

In this work,TTHMP was synthesized and labelled with 117m Sn.The preparation conditions,stability and lipophilicity of 117m Sn(IV)-TTHMP were investigated.Biodistribution of the complex in rabbits and mice was studied.It was found that the quantity of TTHMP and pH value of the prepararion solution had vital effects on the labeling yield of 117m Sn(IV)-TTHMP.It was also found that 117m Sn(IV)-TTHMP was hydrophilic and stable at room temperature and 37℃ in open air 117m Sn(IV)-TTHMP showed unexpectedly high bone uptake and bone-to-blood ratio in the animals.This made it potentially useful as an reagent for skeletal scintigraphy and radiotherapy of bone tumors.     

The role of AGFA high-energy CR in the calibration and quality control of multileaf collimators （MLC）

Linear accelerators equipped with multileaf collimators （MLC） are becoming more common and are widely used in the intensity-modulated radiotherapy （IMRT）. There is an imperative need to ensure the commissioning specification of the linear accelerators for the sake of quality assurance （QA） and quality control （QC）. This paper is aimed to investigate the role of AGFA high-energy CR （Computed Radiography） in calibrating dynamic multileaf collimators and evaluating the accuracy of the leaf position. The result shows that AGFA high-energy CR can easily and conveniently be used to calibrate MLC and verify its position. Hence, the application of AGFA high-energy CR is proved to be an accurate and time-saving method for routine MLC QC, especially when MLC calibration adjustments are required.     

微型X射线管空气比释动能和能谱的测量

为研究微型X射线管的特性,通过电离室测量光管出射口30 cm远处的空气比释动能,使用高纯锗探测器分别测量了Ag过滤和Cu过滤下的X射线能谱。结果表明,空气比释动能随电流的增加有线性增加的趋势,能谱图明显的观察到银的两个特征X射线。完成了微型X射线管空气比释动能和能谱的测量方法以及实验测量的工作,为微型x射线管下辐射质的建立提够了条件基础。     

Gamma-ray attenuation technique for measuring void fraction in horizontal gas-liquid two-phase flow

The measurement of void fraction is of importance to the oil industry and chemical industry. In this article, the principle and mathematical method of determining the void fraction of horizontal gas-liquid flow by using a single-energy γ-ray system is described. The γ-ray source is the radioactive isotope of 241Am with γ-ray energy of 59.5 keV. The time-averaged value of the void fraction in a 50.0-mm i.d. transparent horizontal pipeline is measured under various combinations of the liquid flow and gas flow. It is found that increasing the gas flow rate at a fixed liquid flow rate would increase the void fraction. Test data are compared with the predictions of the correlations and a good agreement is found. The result shows that the designed γ-ray system can be used for measuring the void fraction in a horizontal gas-liquid two-phase flow with high accuracy.