铈、钇在AZ91D镁合金中的存在形式及其作用

在AZ91D镁合金中添加稀土元素Ce和Y,研究了Ce,Y元素在铸态AZ91D镁合金中的存在形式以及对合金组织和性能的影响。结果表明,铸态AZ91D镁合金中加入的Ce,Y大部分形成Al4Ce和Al2Y化合物,少量剩余的Ce,Y部分取代Mg元素的位置,以代位固溶的形式固溶在α-Mg固溶体和β-Mg17Al12金属间化合物中;Ce,Y能够细化镁合金铸态组织的晶粒,使Mg17Al12相发生"断网"并减少其在组织中的相对比例;适量添加Ce,Y能够提高AZ91D镁合金铸态机械性能,其主要原因是Ce,Y的细晶作用、固溶强化作用、Al-RE相的第二相强化作用以及对Mg17Al12相强化作用的改善。     

镱对AZ91D镁合金显微组织和力学性能的影响

在Mg-9Al-1Zn合金的基础上添加不同质量分数的Yb, 制备了4种合金. 通过X射线衍射、金相显微镜、扫描电镜及能谱分析仪等手段分析了Yb的添加对AZ91D显微组织和力学性能的影响. 结果表明: Yb的加入, 显著改变了AZ91D合金的铸态组织, 细化了β-Mg17Al12相, 且β-Mg17Al12脆性相由连续网状分布逐渐变为离散状, 同时晶界上出现了块状的Al11Yb3和点状Al6Mn4Yb化合物. 当Yb含量为1.0%时, 该合金具有最佳的综合力学性能, 抗拉强度达到194 MPa, 比AZ91D提高22%, 伸长率和硬度也随着Yb含量的增加而提高. 研究表明, 重稀土元素Yb在镁合金中显示出与轻稀土更相近的作用效果.     

铈对压铸镁合金AZ91组织和高温性能的影响

采用Olympus—PMG3型光学显微镜、D／Max 2500PC型X射线衍射仪(XRD)、带有EDAX—Falcon能谱仪(EDS)的JSM-5500LV型扫描电子显微镜(SEM)及AG-10TA型电子万能实验机，研究了Ce对压铸镁合金AZ91显微组织、常温性能及高温(150℃)性能的影响。结果表明：AZ91合金中加入Ce后，形成了新的Al4Ce相，使Mg17Al12(γ)相尺寸减小、数量减少、并由网状分布变得离散分布。Ce对AZ91合金常温性能的影响不大，但显著提高了高温性能。加入1．0％Ce的合金具有最好的显微组织和性能，但是Ce的加入量过高，反而使合金的性能降低。     

铒和钕对铸态ZK60镁合金显微组织和力学性能的影响

研究了铒和钕对铸态ZK60镁合金显微组织和力学性能的影响。结果表明：ZK60镁合金中添加Er或Nd能够细化晶粒，改变合金的显微组织。当ZK60镁合金中加入1．0％（质量分数）的Er或Nd具有最佳的细化效果，与原ZK60镁合金晶粒尺寸相比较，晶粒的平均直径由原来的33．0μm分别减少至23．6和25．2μm。添加Er或Nd的ZK60镁合金形成古有Er或Nd的稀土共晶相，其熔点为518℃。稀土共晶相对晶粒具有钉扎作用，提高合金在150℃时的抗拉强度。稀土共晶相的形态和分布对室温力学性能有显著影响。含有Er的共晶相析出数量较少，沿晶界不连续分布，提高合盒室温强度的同时塑性略有改善，而含有Nd的共晶相形态粗大，析出数量较多，沿晶界网状连续分布，合金固溶强化效果明显减弱，室温强度和塑性均降低。     

富铈混合稀土对AZ81合金组织与性能的影响

研究了富铈混合稀土对挤压铸造AZ81合金的显微组织和力学性能的影响。结果表明:加入不同含量富铈混合稀土的合金中都出现了一种新相Al11(Ce,La)3相,Al11(Ce,La)3相数量增多而Mg17Al12相则减少,能细化合金的组织晶粒,其细化作用在添加了1.5%富铈混合稀土的镁合金中尤为明显,但是当富铈混合稀土加入量大于2.0%时,合金中Al11(Ce,La)3相开始长大以粗大长杆状存在;在富铈混合稀土含量为1.5%时,AZ81合金的室温和150℃的综合力学性能达到最佳效果,超过2.0%时合金的室温和150℃综合力学性能开始下降;合金试样的拉伸断口带有局部韧窝的解理断裂和韧性断裂的混合特征。     

钆对Mg-2Al-1Zn合金高温力学性能的影响

研究了Gd的添加对AZ21基体合金高温（200℃）力学性能和抗蠕变性能的影响。结果表明：AZ21-xGd合金由-αMg和Al2Gd两相组成,中间相Al2Gd使合金高温拉伸性能和抗蠕变性能得到显著提高,但降低了合金的延伸率。在Gd添加量为2%（质量分数）时,200℃下合金的抗拉强度和屈服强度分别达到148和90 MPa,但随着Gd含量的增加,高温拉伸强度有所下降;当Gd添加量为3.5%时,在200℃/50MPa蠕变条件下,合金70 h的蠕变量为1.2%,第二阶段蠕变率比AZ21基体合金下降了1个数量级。晶界上的Al2Gd中间相数量逐渐增多是提高合金的抗蠕变性能的主要原因,但在晶界上过多的Al2Gd中间相不利于提高合金的高温强度。     

富钇混合稀土对AM60镁合金显微组织与力学性能的影响

在AM60镁合金的基础上添加不同质量分数的富Y混合稀土(分别为0.5%,1.0%,1.5%,2.0%),研究了富钇混合稀土对AM60镁合金显微组织与力学性能的影响。结果表明:富Y稀土的加入使AM60镁合金的显微组织明显细化,并能显著提高合金的抗拉强度、屈服强度及延伸率。加入混合稀土后,合金中形成块状的铝钇化合物Al2Y,Al6Mn6Y,β-Mg17Al12相数量减少。当稀土加入量为1%时,合金的各方面性能达到最好。     

钇对AZ91镁合金微观组织及腐蚀性能影响的研究

通过金相分析、扫描电镜析及化学成分分析等测试手段,对添加不同含量Y的AZ91镁合金的微观组织和腐蚀性能进行了研究。结果表明,加入Y后,合金中有稀土相Al4MgY生成,并显著细化了合金的微观组织,合金微观组织由典型的枝晶组织转变为细小的等轴晶组织,当Y含量达到1.52%时,合金组织的细化程度最大;Y的加入,减少了合金中的-βMg17Al12相,并使β相断续、弥散,同时合金的耐腐蚀性能提高,在3.5%NaCl水溶液腐蚀实验中,稀土含量为1.52%Y的合金耐腐蚀性能最好。     

钕对Mg7Zn2Al镁合金显微组织及力学性能的影响

采用光学显微镜、XRD、SEM和万能实验机等手段研究了稀土Nd(0.3%,0.6%,0.9%)对Mg7Zn2Al镁合金显微组织和力学性能的影响。结果表明:Mg7Zn2Al镁合金中添加Nd后,显微组织中有针状或棒状的Al2Nd和AlNd等稀土相生成,合金中的共晶组织(α-Mg+Mg32(Al,Zn)49+Mg7Zn3)得到了明显细化;但是α-Mg有粗化趋势,呈现发达的树枝状或胞状,共晶相由粗大连续的网状变为细小的块状或颗粒状分布在树枝晶的一次枝晶臂或二次枝晶臂的间隙。随着Nd含量的增加,合金的抗拉强度和延伸率呈逐渐下降趋势,显微组织的粗化是造成合金拉伸性能降低的主要原因,而硬度没有明显的变化。     

Mg-SiO_2体系制备Mg_2Si/AZ91D复合材料的研究

采用原位合成技术制备了Mg2Si/AZ91D复合材料,并通过光学显微镜(OM)、扫描电镜(SEM)、能谱仪(EDS)和X射线衍射仪(XRD)等对添加碱土、稀土元素的影响进行了研究。结果表明:AZ91D镁合金中加入SiO2(其中Si占合金质量的3%)后,出现多边形状或树枝晶状的初生Mg2Si相,以及汉字状的共晶Mg2Si相,树枝晶状Mg2Si的平均尺寸约25~50μm,汉字状Mg2Si的平均尺寸约12~15μm;Mg2Si对镁合金中的β-Mg17Al12相有细化作用。添加Ca,Sr,Y对Mg2Si形貌、尺寸有明显的改善,当添加0.9%Ca,0.1%Sr,0.5%RE(80%Y)变质处理后,Mg2Si形貌全部变为多边形状,平均尺寸约0.8~5μm。     

Dichroism of absorption and polarization of phosphorescence of molecules of the closed form of nitrobenzospirothiopyran

The spectral-polarization characteristics of absorption and phosphorescence of molecules of the initial form of nitro-substituted indolinospirobenzothiopyran were studied in oriented polyethylene films and in solutions with different polarity. An oscillator model of the electron transitions responsible for the formation of absorption and luminescence spectra was suggested. It was established that the principal differences in the spectral and photophysical properties of the compound studied and its oxygen-containing analog are associated with the fact that the electronegativity of the S atom is lower than that of the O atom. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1143–1146, June, 1997.     

非那雄胺合成工艺改进

非那雄胺能抑制5α-还原酶的活性,明显降低二氢睾酮水平,是一种治疗良性前列腺增生的有效药品。该合成工艺以甾烯酮酸为原料,将其与氯化亚砜反应,无须分离即与叔丁胺反应得17β-酰胺化合物,再氧化开环,环合,氢化,脱氢合成了非那雄胺。经元素分析、IR、1HNMR、13CNMR、MS分析表征了其结构。该法无须使用昂贵的2,2-二吡啶二硫化物和剧毒药品苯亚硒酸酐,且以乙酸铵代替氨气,降低了对设备的要求和腐蚀,更适用于工业生产。     

Determination of heats of detonation and influence of components of composite explosives on heats of detonation of high explosives

The heats of detonation of 20 simple high explosives and explosive mixtures were determined by means of an adiabatic detonation calorimeter designed by the authors. The results indicated that the performance of the instrument was reliable and the experimental data were very accurate. For explosive mixtures, there was a linear accumulative relationship between the heats of detonation of the explosive mixture and its components. Accordingly, the heats of detonation of explosive mixtures could be calculated directly from the heats of detonation of simple explosives and the characteristic heats of other components. The experiments showed that the gold or brass shell of the cylindrical charge could be substituted by a thick-walled porcelain shell, which had the advantage of cheapness.

     

Synthesis of phenolic components of Grains of Paradise

Two vanilloids, (5E)-8-(4-hydroxy-3-methoxyphenyl)oct-5-en-4-one (1) and 4-[3-hydroxydecyl]-2-methoxyphenol (2), isolated from the dried seeds of Grains of Paradise (Aframomum melegueta), were synthesized; the latter compound was made as the S-enantiomer and the material derived from the seeds was found to be a 1:1.7 mixture of the R and S isomers. The synthetic route used should allow the preparation of analogs having extended alkyl chains and consequently different lipophilicity, and 3, a homolog of 2, was also prepared.     

恶臭嗅辨实验室建设探讨

针对恶臭测试的环境影响问题,提出了解决的实例方案,并对方案的要点及优缺点进行讨论,此方案在实际操作中具有较好的效果。     

氯氧化镁生成热的研究

用氧化镁氯化镁水溶液制备了8水合氯氧化镁[nMg(OH)2·MgCl2·8H2O], 并测定了其在盐酸中的溶解热, 实验结果表明, 氯氧化镁溶解热与n值呈线性关系, 根据溶解热求出5Mg(OH)2·MgCl2·8H2O和3Mg(OH)2·MgCl2·8H2O的生成热分别为-7727.1和5888.1kJ·mol^1^-。     

Summary of development of the theory of stability of colloids and thin films

In this review, the research of the author in the field of colloidal systems is summarized. The factors influencing colloidal stability are systematized and analyzed. Examples are presented to illustrate the practical utilization of the theory of stability of colloids and thin films.This review was prepared on the basis of the works of the author, which were awarded the State Premium for 1991 in the field of science and technology, chemistry section.Institute of Physical Chemistry, Russian Academy of Sciences, 117915 Moscow. Translated from Izvestiya Akademii Nauk, Seriya Khimicheskaya, No. 8, pp. 1708–1717, August, 1992.     

Study of hydration of two cements of different strengths

Main hydration products of two cement pastes, i.e. CSH-gel, portlandite (P) (and specific surface S) were studied by static heating, and by SEM, TEM and XRD, as a function of cement strength (C-33 and C-43) hydration time (th) and subsequent hydration in water vapour.Total change in mass on hydration and air drying, M_o, increased with strength of cement paste and with hydration time. Content of water escaping at 110 to 220°C, defined as water bound with low energy, mainly interlayer and hydrate water, was independent on cement strength but its content increased with (th). Content of chemically bound (zeolitic) water in CSH-gel, escaping at 220-400°C, was slightly dependent on strength and increased with (th). It was possibly derived from the dehydroxylation of CSH-gel and AFm phase. Portlandite water, escaping at 400-500°C, was independent on cement strength and was higher on longer hydration. Large P crystals were formed in the weaker cement paste C-33. Smaller crystals were formed in C-43 but they increased with (th). Carbonate formated on contact with air (calcite, vaterite and aragonite), decomposed in cement at 600-700^oC. It was high in pastes C-33(1 month) and C-43(1 month), i.e. 5.7 and 3.3%, respectively; it was less than 1% after 6 hydration months (low sensitivity to carbonation) in agreement with the XRD study showing carbonates in the air dry paste (1month), and its absence on prolonged hydration (6 months) and on acetone treatment. Water vapour treatment of (6 months) pastes or wetting-drying increased this sensitivity.Nanosized P-crystals, detected by TEM, could contribute to the cement strength; carbonate was observed on the rims of gel clusters.This revised version was published online in November 2005 with corrections to the Cover Date.     

解决能源问题的新途径--光解水制氢的研究

面对日益枯竭的能源危机,氢能是一种洁净、最有前景的替代能源。目前在各种制氢的方法中光催化分解水制氢的研究最多,光解水过程中催化剂最关键,本文对利用太阳能光解水的途径、提高光催化反应效率以及光催化剂的开发研究进行了综述。