Synthesis,curing behavior and thermal properties of silicon‐containing hybrid polymers with Si−C≡C units

Three novel kinds of linear silicon‐containing hybrid polymers with Si?C≡C units were synthesized by polycondensation reactions using the Grignard reagent method. All the polymers were thermosetting, highly heat‐resistant, moldable and easily soluble in common organic solvents. The structure, curing behavior, thermal and oxidative properties were characterized using Fourier transform infrared spectroscopy, ¹H NMR, ¹³C NMR, gel permeation chromatography, differential scanning calorimetry and thermogravimetric analysis. The results obtained can provide theoretical guidance for determining the curing of the resin system. In addition, the cured polymers exhibit excellent thermal and oxidative stabilities with temperatures of 5% weight loss (T_d5) above 480 °C and 450 °C in nitrogen and air respectively; the residues at 1000 °C were above 70.0% and 45.0% respectively. The thermal and oxidative stabilities of the polymers are attributed to a crosslinking reaction between the Si?H and C≡C bonds or C≡C bonds. These polymers have the potential for use as high‐temperature‐resistant resins and ceramic precursors. © 2013 Society of Chemical Industry     

Comparison of interdiffusion at polystyrene–poly(vinyl methyl ether) and polystyrene–poly(isobutyl vinyl ether) interfaces

The effect of polymer–polymer compatibility on interdiffusion at polymer interfaces with dissimilar mobilities was investigated by attenuated total internal reflectance infrared spectroscopy. The polymer pair consisting of polystyrene and poly(vinyl methyl ether) was used to study interdiffusion at the interface of compatible polymers. The polymer pair consisting of polystyrene and poly(isobutyl vinyl ether) was used to study interdiffusion at the interface of incompatible polymers. Results indicate that the extent of interdiffusion is controlled by the polymer–polymer compatibility parameter, irrespectively of the differences in the mobility of the polymers.     

Enhanced fracture toughness of epoxy resins with novel amine‐terminated poly(arylene ether sulfone)–carboxylic‐terminated butadiene‐acrylonitrile–poly(arylene ether sulfone) triblock copolymers

Amine‐terminated poly(arylene ether sulfone)–carboxylic‐terminated butadiene‐acrylonitrile–poly(arylene ether sulfone) (PES‐CTBN‐PES) triblock copolymers with controlled molecular weights of 15,000 (15K) or 20,000 (20K) g/mol were synthesized from amine‐terminated PES oligomer and commercial CTBN rubber (CTBN 1300x13). The copolymers were utilized to modify a diglycidyl ether of bisphenol A epoxy resin by varying the loading from 5 to 40 wt %. The epoxy resins were cured with 4,4′‐diaminodiphenylsulfone and subjected to tests for thermal properties, plane strain fracture toughness (K_IC), flexural properties, and solvent resistance measurements. The fracture surfaces were analyzed with SEM to elucidate the toughening mechanism. The properties of copolymer‐toughened epoxy resins were compared to those of samples modified by PES/CTBN blends, PES oligomer, or CTBN. The PES‐CTBN‐PES copolymer (20K) showed a K_IC of 2.33 MPa m^0.5 at 40 wt % loading while maintaining good flexural properties and chemical resistance. However, the epoxy resin modified with a CTBN/8K PES blend (2:1) exhibited lower K_IC (1.82 MPa m^0.5), lower flexural properties, and poorer thermal properties and solvent resistance compared to the 20K PES‐CTBN‐PES copolymer‐toughened samples. The high fracture toughness with the PES‐CTBN‐PES copolymer is believed to be due to the ductile fracture of the continuous PES‐rich phases, as well as the cavitation of the rubber‐rich phases. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 1556–1565, 2002; DOI 10.1002/app.10390     

Synthesis and characterization of silicon‐containing poly(amide‐amide)s

A modified new aromatic diacid, bis[(4‐carboxyphenyl) 4‐benzamide] dimethylsilane (IV) with preformed amide linkages and a silicon moiety was synthesized and characterized by IR, NMR, mass spectroscopy, and a physical constant. Novel poly(amide‐amide)s were synthesized from IV and aromatic diamines by Yamazaki's direct polyamidation method in N‐methyl pyrrolidinone. The polymers were obtained in excellent yields and showed reduced viscosities in the range of 0.42–6.15 dL/g. They were readily soluble in aprotic polar solvents. These poly(amide‐amide)s showed glass‐transition temperatures of 303–378°C as measured by DSC and showed no weight loss below 377°C in a nitrogen atmosphere. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 79: 1610–1617, 2001     

Synthesis and analysis of properties of a new core–shell silicon‐containing fluoroacrylate latex

BACKGROUND: Silicon‐containing fluoroacrylate copolymers are potential materials for use in the protection of ancient stone buildings. In the work reported in this paper, a new core–shell silicon‐containing fluoroacrylate latex was prepared through grafting of a fluoroacrylate copolymer latex with polysiloxane. RESULTS: The core–shell silicon‐containing fluoroacrylate latex was successfully synthesized by seed emulsion polymerization and octamethylcyclotetrasiloxane (D₄) ring‐opening polymerization in the presence of a mixed emulsifier consisting of a non‐ionic emulsifier and a novel fluorine‐containing anionic emulsifier sodium perfluoro‐octane sulfonate. Transmission electron microscopy, X‐ray photoelectron spectroscopy, static contact angle measurements and scanning electron microscopy‐energy dispersive X‐ray analysis showed that when the D₄ content was controlled at 2.84–4.36 wt%, the silicon‐containing fluoroacrylate latex presented a uniform sphere core‐shell structure and had strong hydrophobic and oleophobic characters due to the association of both fluorine and silicon atoms on the latex film surface. The film cross‐section exhibited uniform and dense microstructure without any phase segregation. Additionally, thermogravimetric analysis and tensile test results indicated that all the silicon‐containing fluoroacrylate copolymers displayed better thermal stability and higher flexibility. CONCLUSION: The synthetic core–shell silicon‐containing fluoroacrylate latex showed excellent surface properties, thermal stability and flexibility, and has encouraging prospects in application as a protective coating. Copyright © 2009 Society of Chemical Industry     

Synthesis of novel poly(vinyl ether)s containing the oxybenzylidenemalononitrile group as a nonlinear optical chromophore,and their electro‐optic properties

2,4‐Di‐(2′,2′‐dicyanovinyl)‐1‐(2′‐vinyloxyethoxy)benzene and 2,4‐di‐(2′‐carbomethoxy‐2′‐cyanovinyl)‐1‐(2′‐vinyloxyethoxy)benzene were prepared by condensation of 4‐(2′‐vinyloxyethoxy)isophthaldehyde with malononitrile and methyl cyanoacetate, respectively. The two vinyl monomers were polymerized with boron trifluoride etherate as a cationic initiator to yield poly(vinyl ether)s containing two oxybenzylidenemalononitrile and oxybenzylidenecyanoacetate groups, which are effective chromophores for second‐order nonlinear optical applications. These polymers were soluble in common organic solvents such as acetone and dimethyl sulforide. They showed thermal stabilities up to 300 °C from thermogravimetric analysis (TGA), with differential scanning calorimeter (DSC) thermograms giving T_g values in the range 73–87 °C. The second harmonic generation (SHG) coefficients (d₃₃) of poled polymer films were around 1.8 × 10^?9 esu, and these polymers showed good long‐term thermal stability for 60 days at room temperature, which is acceptable for nonlinear optical (NLO) device applications. Copyright © 2004 Society of Chemical Industry     

Synthesis and photopolymerization of 4‐(1‐propenyl)oxybutyl acrylate

Hybrid monomer, 4‐(1‐propenyl)oxybutyl acrylate, with cationic and free radical polymerizable group was synthesized. Real‐time Fourier transform infrared spectroscopy (FTIR) was used to monitor the photopolymerization kinetics of the monomer. Photopolymerization processing conditions, such as light intensity, photoinitiator concentrations have been evaluated. It was found that hybrid monomer showed higher efficiency of photopolymerization in comparison with the blend system. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Synthesis and characterization of greenish‐blue emitting vinyl copolymer containing pyrene and triarylamine moieties

Two fluorescent monomers N‐phenyl‐N‐(4‐vinylphenyl)pyren‐1‐amine (vinyl‐PyPA) and 1‐vinyl pyrene (VPy) were synthesized in good yields. A series of soluble conductive vinyl copolymers P(PyPA‐co‐VPy) containing vinyl‐PyPA and VPy moieties in different composition ratios were prepared by free radical solution polymerization. These copolymers showed high T_g (190?201 °C) and good thermal stability. The photoluminescence emission maxima of the copolymers were all in the range 474.5?478.5 nm, which was similar to the poly(N‐phenyl‐N‐(4‐vinylphenyl)pyren‐1‐amine) (P(PyPA)) (475 nm) but blue shifted compared with poly(1‐vinyl pyrene) (PVPy) (490.5 nm). The lifetime of the copolymers increased from 10.2 to 29.7 ns with an increase in pyrene content. The copolymers had higher quantum yields (0.51) than those of the homopolymers of P(PyPA) (0.48) and PVPy (0.13). The highest occupied molecular orbital of the copolymers remained relatively unchanged from P(PyPA), while the lowest unoccupied molecular orbital varied from ?2.41 eV to ?2.51 eV with an increase in pyrene ratio in the copolymers. The energy bandgaps of the copolymers (from 2.70 eV to 2.81 eV) were smaller than those of P(PyPA) (2.82 eV) and PVPy (3.47 eV). Two polymer light‐emitting diode (PLED) series were attempted including indium tin oxide (ITO) (fluorocarbon (CFx) treated)/P(PyPA‐co‐VPy)/LiF/Al and ITO(CFx treated)/P(PyPA‐co‐VPy)/1,3,5‐Tri(1‐phenyl‐1H‐benzo[d]imidazol‐2‐yl)phenyl (TPBi)/LiF/Al. The results suggested that the PyPA moiety is hole conducting and the PLEDs can achieve high luminance from 650 to 1150 cd m^?2 (at 100 mA cm^?2) only when an electron injecting layer TPBi is employed. © 2013 Society of Chemical Industry     

Synthesis of well‐defined poly(vinyl ether)‐based macromonomers having pendant glycerols via living cationic polymerization and their application to the preparation of core−shell polymer particles

A new vinyl ether monomer bearing a glycerol pendant moiety protected with an isopropylidene group (2‐(2,2‐dimethyl‐[1,3]dioxolan‐4‐ylmethoxy)‐ethyl vinyl ether, IpGEVE) was designed as the precursor of a novel type of hydrophilic poly(vinyl ether) containing glycerol pendants. It was found that the polymerization of IpGEVE proceeded in a controlled manner, and the protecting groups of isopropylidene moieties could be cleaved with trifluoroacetic acid. Living cationic polymerization of IpGEVE with an initiator bearing a methacryloyl group (VEM‐HCl) and subsequent deprotection of the pendant isopropylidene groups of the resultant precursor afforded a glycerol‐substituted hydrophilic macromonomer MA‐PGEVE. Nearly monodispersed polymer particles in the submicron size range were successfully obtained via dispersion copolymerization of MA‐PGEVE with styrene.© 2013 Society of Chemical Industry     

Crystallization behavior of poly(ϵ‐caprolactone) in poly(ϵ‐caprolactone) and poly(vinyl methyl ether) mixtures

The morphological development and crystallization behavior of poly(?‐caprolactone) (PCL) in miscible mixtures of PCL and poly(vinyl methyl ether) (PVME) were investigated by optical microscopy as a function of the mixture composition and crystallization temperature. The results indicated that the degree of crystallinity of PCL was independent of the mixture composition upon melt crystallization because the glass‐transition temperatures of the mixtures were much lower than the crystallization temperature of PCL. The radii of the PCL spherulites increased linearly with time at crystallization temperatures ranging from 42 to 49°C. The isothermal growth rates of PCL spherulites decreased with the amount of the amorphous PVME components in the mixtures. Accounting for the miscibility of PCL/PVME mixtures, the radial growth rates of PCL spherulites were well described by a kinetic equation involving the Flory–Huggins interaction parameter and the free energy for the nuclei formation in such a way that the theoretical calculations were in good agreement with the experimental data. From the analysis of the equilibrium melting point depression, the interaction energy density of the PVME/PCL system was calculated to be ?3.95 J/cm³. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Synthesis,properties, and self‐assembly of poly(benzyl ether)‐b‐polystyrene dendritic–linear polymers

Poly(benzyl ether)‐b‐polystyrene dendritic–linear polymers were successfully synthesized using a dendritic chloric poly(benzyl ether) (G₁‐Cl, G₂‐Cl, and G₃‐Cl) as the macroinitiator through the atom transfer radical polymerization process. The structure and properties of the resultant polymers were characterizated by gel permeation chromatography, ¹H‐NMR, Fourier transform IR, thermogravimetric analysis, and differential scanning calorimetry. It was found that the temperature, reaction time, molar ratio of the macroinitiator to styrene, and the generation number of the macroinitiator have significant effects on the molecular weights, conversion, and polydispersities of the resulting polymers. These dendritic–linear block polymers had very good solubility in common organic solvents at room temperature. The terminal group (dendritic segments) of the polymers can affect their thermal stability. These dendritic–linear polymers after self‐assembling in selective solvents (chloroform/acetone) formed core–shell micelles. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 1106–1112, 2005     

Synthesis and characterization of poly(vinyl chloride‐co‐vinyl acetate)‐graft‐poly[(meth)acrylates] by atom transfer radical polymerization

The graft polymerization of methyl methacrylate and butyl acrylate onto poly(vinyl chloride‐co‐vinyl acetate) with atom transfer radical polymerization (ATRP) was successfully carried out with copper(I) thiocyanate/N,N,N′,N′,N″‐pentamethyldiethylenetriamine and copper(I) chloride/2,2′‐bipyridine as catalysts in the solvent N,N‐dimethylformamide. For methyl methacrylate, a kinetic plot of ln([M]₀/[M]) (where [M]₀ is the initial monomer concentration and [M] is the monomer concentration) versus time for the graft polymerization was almost linear, and the molecular weight of the graft copolymer increased with increasing conversion, this being typical for ATRP. The formation of the graft polymer was confirmed with gel permeation chromatography, ¹H‐NMR, and Fourier transform infrared spectroscopy. The glass‐transition temperature of the copolymer increased with the concentration of methyl methacrylate. The graft copolymer was hydrolyzed, and its swelling capacity was measured. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 183–189, 2005     

Poly(vinyl pyrrolidone‐co‐vinyl acetate)‐graft‐poly(ε‐caprolactone) as a compatibilizer for cellulose acetate/poly(ε‐caprolactone) blends

Poly(vinyl pyrrolidone‐co‐vinyl acetate)‐graft‐poly(ε‐caprolactone) (PVPVAc‐g‐PCL) was synthesized by radical copolymerization of N‐vinyl‐2‐pyrrolidone (VP)/vinyl acetate (VAc) comonomer and PCL macromonomer containing a reactive 2‐hydroxyethyl methacrylate terminal. The graft copolymer was designed in order to improve the interfacial adhesiveness of an immiscible blend system composed of cellulose acetate/poly(ε‐caprolactone) (CA/PCL). Adequate selections of preparation conditions led to successful acquisition of a series of graft copolymer samples with different values of molecular weight ( ), number of grafts (n), and segmental molecular weight of PVPVAc between adjacent grafts (M_n (between grafts)). Differential scanning calorimetry measurements gave a still immiscible indication for all of the ternary blends of CA/PCL/PVPVAc‐g‐PCL (72 : 18 : 10 in weight) that were prepared by using any of the copolymer samples as a compatibilizer. However, the incorporation enabled the CA/PCL (4 : 1) blend to be easily melt‐molded to give a visually homogeneous film sheet. This compatibilizing effect was found to be drastically enhanced when PVPVAc‐g‐PCLs of higher and M_n (between grafts) and lower n were employed. Scanning electron microscopy revealed that a uniform dispersion of the respective ingredients in the ternary blends was attainable with an assurance of the mixing scale of several hundreds of nanometers. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Study on the optical properties of sulfur‐containing poly(methyl methacrylate)‐inorganic hybrid

High refractive index homogeneous hybrid materials were successfully prepared. The polymer matrix was the copolymer of methyl methacrylate, sulfur‐containing monomer 2,2′‐mercaptoethylsulfide dimethacrylate (MESDMA), and nanotitania was prepared by in situ solgel process of titanium n‐butoxide. The transmission electron microscope (TEM) study suggested that the hybrid was homogeneous without inorganic agglomerate, and the inorganic particles were 4–7 nm. The refractive index was ～ 1.75 when the inorganic content of the hybrid film reached to 70 wt %, and the transmittance maintained up to 85%. The sulfur‐containing monomer was used to improve the refractive index, also, it was a crosslinking reagent, which improved the film‐forming ability of the hybrid. After copolymerized with MESDMA, the film‐forming ability of the hybrid was better than the one without MESDMA. Even if the inorganic content exceeded 75 wt %, the films kept integrity. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Preliminary investigation of poly(ether sulfone)/poly(aryl ether ketone) containing 1,4‐naphthalene blends

The blends of poly(ether sulfone) and poly(aryl ether ketone) containing 1,4‐naphthalene were prepared by melt mixing in a Brabender‐like apparatus. The specimens for measurements were made by compression molding under pressure and then were water‐quenched at room temperature. The tensile strength, tensile modulus, elongation at break, thermal analysis, and scanning electron microscopy were each measured. The dependence of tensile strength, tensile modulus, and elongation at break on blend systems was obtained. The effects of composition and miscibility on the mechanical properties are discussed. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 99: 472–476, 2006     

Biodegradable poly(vinyl alcohol)‐graft‐ poly(ε‐caprolactone) comb‐like polyester: Microwave synthesis and its characterization

Poly(vinyl alcohol)‐initiated microwave‐assisted ring opening polymerization of ε‐caprolactone in bulk was investigated, and a series of poly(vinyl alcohol)‐graft‐poly(ε‐caprolactone) (PVA‐g‐PCL) copolymers were prepared, with the degree of polymerization (DP) of PCL side chains and the degree of substitution (DS) of PVA by PCL being in the range of 3–24 and 0.35–0.89, respectively. The resultant comb‐like PVA‐g‐PCL copolymers were confirmed by means of FTIR, ¹H NMR, and viscometry measurement. The introduction of hydrophilic backbone resulted in the decrease in both melting point and crystallization property of the PVA‐g‐PCL copolymers comparing with linear PCL. With higher microwave power, the DP of PCL side chains and DS of PVA backbone were higher, and the polymerization reaction proceeded more rapidly. Both the DP and monomer conversion increased with irradiation time, while the DS increased first and then remained constant. With initiator in low concentration, the DP and DS were higher, while the monomer was converted more slowly. Microwaves dramatically improved the polymerization reaction in comparison of conventional heating method. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104, 3973–3979, 2007     

Contributions to characterization of poly(vinyl chloride)–lignin blends

The present study evaluates the impact of blending organosolv and kraft lignins, which are natural polymer by‐products in the pulp and paper industry, with plasticized poly(vinyl chloride) (PVC) in flooring formulations. Also examined is the impact of replacing dioctyl phthalate, a PVC industry general‐purpose plasticizer, with diethylene glycol dibenzoate (Benzoflex 2‐45), tricresyl phosphate (Lindol), or alkyl sulfonic phenyl ester (Mesamoll) in these formulations. The influence of the different types of lignins and plasticizers on the processibility, thermal, and mechanical properties of the blends is discussed. These properties demonstrate that partial replacement of PVC (20 parts) with different lignins is feasible for some formulations that can be successfully used as matrices for a high level of calcium carbonate filler in flooring products. In addition, the data demonstrate that the presence of certain plasticizers, which interfere with the intramolecular interactions existing in lignins, may allow the lignin molecules to have more molecular mobility. The morphology and the properties of PVC plasticized lignin blends are strongly influenced by the degree and mode of the lignin plasticization and its dispersion within the PVC matrix. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 2732–2748, 2006     

Effect of temperature,solvent, Lewis acid and additives on the polymerization of tert‐butyl vinyl ether using Lewis acid‐induced N‐methyleneamines as cationic initiators

N‐Methyleneamines, formed by treating 1,3,5‐trimethylhexahydro‐1,3,5‐triazines with Lewis acids, have been shown to be capable initiators in the cationic polymerization of tert‐butyl vinyl ether, yielding polymers with amine functionality at the chain ends. Previous work was limited to titanium(IV) chloride (TiCl₄) as the Lewis acid in dichloromethane solvent at 0 °C (with resulting polymers possessing relatively broad polydispersity index (PDI) values near 2), while this contribution details the effect of reaction parameters on the polymeric products; specifically, the role of temperature, solvent, Lewis acid and additives. Ultimately, performing the polymerization at ?78 °C in dichloromethane with TiCl₄ as the Lewis acid and tetra‐n‐butylammonium chloride (nBu₄NCl) as the additive afforded the best control over the system, with polymers formed possessing low PDI values (<1.2). Dramatic changes in number‐average molecular weight and PDI were observed in polymers formed by initiating systems of Lewis acid‐induced N‐methyleneamines, with temperature, solvent, Lewis acid and additives all playing a role. By varying single parameters, optimization of the system was achieved. Copyright © 2009 Society of Chemical Industry     

Synthesis of poly(vinyl alcohol)‐graft‐poly(ε‐caprolactone) and poly(vinyl alcohol)‐graft‐poly(lactide) in melt with magnesium hydride as catalyst

Grafting of poly(ε‐caprolactone) (PCL) and poly(lactide) (PLA) chains on poly(vinyl alcohol) backbone (PVA degree of hydrolysis 99%) was investigated using MgH₂ environmental catalyst and melt‐grown ring‐opening polymerization (ROP) of ε‐caprolactone (CL) and L ‐lactide (LA), that avoiding undesirable toxic catalyst and solvent. The ability of MgH₂ as catalyst as well as yield of reaction were discussed according to various PVA/CL/MgH₂ and PVA/LA/MgH₂ ratio. PVA‐g‐PCL and PVA‐g‐PLA were characterized by ¹H‐ and ¹³C‐NMR, DSC, SEC, IR. For graft copolymers easily soluble in tetrahydrofuran (THF) or chloroform, wettability and surface energy of cast film varied in relation with the length and number of hydrophobic chains. Aqueous solution of micelle‐like particles was realized by dissolution in THF then addition of water. Critical micelle concentration (CMC) decreased with hydrophobic chains. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

氯化橡胶与氯醚树脂的合成与应用

介绍了氯化橡胶的应用及其合成方法,以及作为取代氯化橡胶应用于防腐材料中的氯醚树脂的主要合成方法。通过使用2种材料制成的漆的性能比较发现,氯醚树脂这种环保性更好的材料完全可以取代氯化橡胶,并且有更好的发展前景。