正交各向异性平板开孔弹性波的衍射与动应力集中

采用各向异性平板弯曲波动方程及摄动方法，对正交各向异性无限平板开孔弹性波的衍射及动应力集中的问题进行了分析研究，得到了在稳态波作用下此种忆边界条件波动问题的渐近形式分析解。同时采用复变函数方法及保角映射技术，为求解正交各向异性无限平板开孔弹性波的衍射及动力集中问题提供了一种统一规范的分析方法。     

各向异性平板开孔动应力集中问题的研究

采用各向异性平板弯曲波动理论及摄动方法，对正交各向异性平板开孔弯曲波的散射及动应力集中问题进行了分析研究，得到了此种平板稳态弯曲波动问题的渐近形式的分析解。同时采用保角映射技术，为求解正交各向异性平板开孔弹性波的散射及动应力集中问题提供了一种统一规范的方法。     

四边任意支承条件下弹性矩形薄板弯曲问题的解析解

利用辛几何法推导出了四边为任意支承条件下矩形薄板弯曲的解析解。在分析过程中首先把矩形薄板弯曲问题表示成Hamilton正则方程，然后利用辛几何方法对全状态相变量进行分离变量，求出其本征值后，再按本征函数展开的方法求出四边为任意支承条件下矩形薄板弯曲的解析解。由于在求解过程中并不需要人为的事先选取挠度函数，而是从弹性矩形薄板弯曲的基本方程出发，直接利用数学的方法求出问题的解析解，使得这类问题的求解更加理论化和合理化。文中的最后还给出了计算实例来验证本文方法的正确性。     

Large deflection analysis of plates on elastic foundation by the boundary element method

A boundary element method is developed for the large deflection analysis of thin elastic plates resting on elastic foundation. The subgrade reaction may depend linearly (Winkler-type) or nonlinearly on the deflection as well as on the point coordinates (nonhomogeneous subgrade). Moderately large deflections are examined as described by the von Karman equations. The plate may have arbitrary shape and its boundary may be subjected to any type of boundary condition. The proposed method uses the fundamental solution of the linear plate theory and treats the nonlinearities as well as the subgrade reaction as unknown domain forces. Numerical results are presented to illustrate the method and demonstrate its effectiveness and accuracy.     

弹性矩形板问题的Hamilton正则方程

为了采用辛算法求出弹性矩形板问题的解析解，中直接从弹性矩形板的控制方程出发推导了弹性矩形板，其中包括弹性矩形薄板和厚板问题以及弹性地基上矩形薄板和厚板问题的Hamilton正则方程，为利用辛几何方法求出任意边界条件下这类问题的理论解奠定了基础．     

薄板弯曲问题的虚边界元-最小二乘法

本文提出求解任意形状的薄板弯曲问题的虚边界元-最小二乘法。本法首先利用薄板弯曲平衡方程的格林函数和离开实际边界上分布的未知的横向荷载和法向弯矩函数建立满足实际边界条件的积分方程;然后采用最小二乘法和沿虚边界分段离散化的待定的分布横向荷载和法向弯矩函数得到求上述积分方程离散化数值解的线性代数方程组。导出了一系列的数值积分的公式,并求解了许多例题,数值结果说明本法完全避免了奇异积分及其复杂的处理方法和耗时的运算,而且在边界及其附近区域解的精度比普通边界元(以后简称边界元)法大大地提高了。     

四边固支矩形薄板自由振动的哈密顿解析解

在哈密顿体系中利用辛几何方法求解了四边固支矩形薄板自由振动问题的解析解。首先,从基本方程出发,将问题表示成Hamilton正则方程,然后利用辛几何方法导出本征值问题,从而得到本征函数解,使之满足边界条件;再由方程组有非零解的条件,最终推导出四边固支矩形薄板的自振频率方程,得到频率的解析解。计算了不同长宽比情况下四边固支矩形薄板的频率,结果与已有文献完全一致。该解法有望推广至更多尚未得到解析解的矩形板的振动问题。     

局部荷载作用下有梁矩形板的弹性分析

写出了任意局部荷载作用下各种不同边界条件矩形板的解的表达式．通过梁与板的边界协调分析，求出不同荷载作用下的有梁矩形板解析解，并通过改变其中参数EI与GIt的数值，可以得出局部荷载作用下各种不同边界条件下矩形板的解．     

On the symplectic superposition method for free vibration of rectangular thin plates with mixed boundary constraints on an edge

A novel symplectic superposition method has been proposed and developed for plate and shell problems in recent years. The method has yielded many new analytic solutions due to its rigorousness. In this study, the first endeavor is made to further developed the symplectic superposition method for the free vibration of rectangular thin plates with mixed boundary constraints on an edge. The Hamiltonian system-based governing equation is first introduced such that the mathematical techniques in the symplectic space are applied. The solution procedure incorporates separation of variables, symplectic eigen solution and superposition. The analytic solution of an original problem is finally obtained by a set of equations via the equivalence to the superposition of some elaborated subproblems. The natural frequency and mode shape results for representative plates with both clamped and simply supported boundary constraints imposed on the same edge are reported for benchmark use. The present method can be extended to more challenging problems that cannot be solved by conventional analytic methods.     

Research on establishing BEM of thin plates with Kelvin's fundamental solution

In this paper, a new approach based on Kirchhoff hypothesis of plate is proposed, by employing which the theory of BEM of linear elastostatics can be simplified to BEM of arbitrary thin elastic plate. Instead of the fundamental solution of plate, we adopt the well known Kelvin's solution. By boundary treatment, we can obtain a computational scheme with high consistency, without having to deal with the concentrate load at corner point, and make it easy to analyze the transverse coupling problem of plate. This research work also lies in founding BEM of general shells, so that the difficulty of looking for their fundamental solutions can be avoided.The project is supported by National Natural Science Foundation of China     

Analytical solutions for single- and multi-span functionally graded plates in cylindrical bending

A recently developed plate theory using the concept of shape function of the transverse coordinate parameter is extended to determine the stress distribution in an orthotropic functionally graded plate subjected to cylindrical bending. The transfer matrix method is presented to derive the shape function. The equations governing the plate deformation are then solved analytically using the transfer matrix method for arbitrary boundary conditions. For a simply supported functionally graded plate, a comparison of the present solution with the exact elasticity solution, the first- and third-order shear deformation plate theories is presented and discussed. It is demonstrated that the present method yields more accurate stresses than the first- and third-order shear deformation theories. The effect of boundary conditions and inhomogeneity of material on the displacements and stresses in functionally graded plates are investigated. A multi-span functionally graded plate with arbitrary boundary conditions is further considered to demonstrate the efficiency of the present method.     

任意边界条件下双模量矩形薄板的弯曲

将双模量板等效为两个各向同性小矩形板组成的层合板,假定该层合板的中性面即为两个小矩形板的交界面。根据中性面上应力为零且薄板全厚度上应力的代数和为零,推导了双模量矩形薄板的中性面位置。本文采用严宗达提出的带补充项的双重正弦傅里叶级数通解,该通解可以适用于任意边界条件的矩形薄板且不需要叠加或者重新构造。联立边界条件和控制方程,求得通解中的待定系数并代入到通解中,即可得到任意边界条件下双模量矩形薄板的弯曲解析解。与有限元结果比较,本文结果符合工程精度要求。     

用杂交边界点法分析简支薄板的热弯曲问题

该文利用杂交边界点法对简支薄板的热弹性弯曲进行了分析计算.采用薄板的热弹性理论,通过薄板的修正变分原理建立了各向同性薄板的边界局部积分方程,域内变量使用基本解插值,而边界上的变量则用移动最小二乘法近似.计算时仅需边界上离散点的信息,无论变量近似还是数值积分都不需要网格,因此该方法是一种纯边界类型无网格方法.数值算例表明,杂交边界点法在分析薄板的热弯曲问题时具有效率高、精度高和收敛性好等优点.     

THEORETIC SOLUTION OF RECTANGULAR THIN PLATE ON FOUNDATION WITH FOUR EDGES FREE BY SYMPLECTIC GEOMETRY METHOD

The theoretic solution for rectangular thin plate on foundation with four edges free is derived by symplectic geometry method. In the analysis proceeding, the elastic foundation is presented by the Winkler model. Firstly, the basic equations for elastic thin plate are transferred into Hamilton canonical equations. The symplectic geometry method is used to separate the whole variables and eigenvalues are obtained simultaneously. Finally, according to the method of eigen function expansion, the explicit solution for rectangular thin plate on foundation with the boundary conditions of four edges frees are developed. Since the basic elasticity equations of thin plate are only used and it is not need to select the deformation function arbitrarily. Therefore, the solution is theoretical and reasonable. In order to show the correction of formulations derived, a numerical example is given to demonstrate the accuracy and convergence of the current solution.     

含孔平板弹性波散射问题的复变函数方法

本文采用平板弯曲波动理论及复变函数方法，对平板开孔弹性波的散射及动应力集中问题进行了分析研究，得到了传播急剧记波时此种平板弯曲波动问题的分析解。若同时采用保角射技术，就为主解平板任意形状开孔弹性波的散射及动应力集中问题提供了一种统一规范的方法。作为算例，本文给出了平板开圆孔和椭圆孔附近的动应力集中系数的数值结果，并对其进行了讨论。     

Boundary element method for arbitrary elastic thin shell

In this paper, a boundary element scheme for arbitrary elastic thin shells is elaborated, Based on BEM of 3D linear elasticity and Kirchhoff's hypothesis, boundary integral equations for shells are deduced. As a result, only Kelvin's solution is used, the difficulty in finding a fundamental solution of arbitrary shells is successfully avoided. The project supported by National Natural Science Foundation of China     

弹性地基上各向异性板的静力分析

根据弹性地基上各向异性矩形板弯曲挠度的微分方程精确的求得了适用于各种载荷的非齐次解和各类齐次解。其中由三角函数和双曲线函数组成的齐次解能满足四个边为任意边界条件的问题;由代数多项式和双正弦级数组成的齐次解能满足四个角为任意边界条件的问题。通过适当选取建立了满足任意边界条件和任意载荷作用的一般解。解中的积分常数完全由边界条件来决定。以四边简支承受均布载荷和局部分布载荷的对称迭层复合材料方板为例进行了计算和分析。其结果与已有文献结果是一致的。由于集中载荷不能求得作用点的弯矩,故在例题中改用局部分布载荷因而求得了最大弯矩。     

Free oscillations of a fluid in a cylindrical container with arbitrary axisymmetric bottom and elastic elements on the free surface of the fluid

We consider the problem of free oscillations of an ideal fluid in a container that has the form of a right circular cylinder with arbitrary axisymmetric bottom in the case where the unperturbed free surface of the fluid is covered by an elastic membrane or plate. Using the expansion in eigenfunctions of an auxiliary spectral problem with a parameter in boundary conditions and the method of decomposition of the domain of meridional cross-section of a container, we obtain an analytic solution of the problem. Individual examples of mechanical systems are considered, for which we construct solutions by using the proposed algorithm, analyze these solutions, and compute the frequencies and forms of oscillations.     

Free vibration analysis of a plate on foundation with completely free boundary by finite integral transform method

The theoretical solutions of eigenfrequencies and vibration modes of a rectangular thin plate on an elastic foundation with completely free boundary are derived by using a double finite cosine integral transform method. In the analysis procedure, the elastic foundation is regarded as a Winkler elastic foundation model. Because the basic dynamic elasticity equations of the thin plate on elastic foundation are only used, it is not needed to select the deformation function arbitrarily. Therefore, the solution developed in the present paper is more reasonable and more accurate. To prove the correctness of the solutions, numerical results obtained using the present solutions are compared with those in the literatures.     

Modelling of finite piezoelectric patches: Comparing an approximate power series expansion theory with exact theory

Plate equations for a plate consisting of one elastic layer and one piezoelectric layer with an applied electric voltage have previously been derived by use of power series expansions of the field variables in the thickness coordinate. These plate equations are here evaluated by the consideration of a time harmonic 2D vibration problem with finite layers. The boundary conditions at the sides of the layers then have to be considered. Numerical comparisons of the displacement field are made with solutions from two other theories; a solution with equivalent boundary conditions for a thin piezoelectric layer applied on an elastic plate and an exact solution based on Fourier series expansions. The two approximate theories are shown to be equally good and they both yield accurate results for low frequencies and thin plates.