Mechanism and control of current transport in GaN and AlGaN Schottky barriers for chemical sensor applications

Strong interests are recently emerging for development of integrated high-performance chemical sensor chips. In this paper, the present status of understanding and controlling the current transport in the GaN and AlGaN Schottky diodes is discussed from the viewpoint of chemical sensor applications. For this purpose, a series of works recently carried out by our group are reviewed in addition to a general discussion. First, current transport in GaN and AlGaN Schottky barriers is discussed, introducing the thin surface barrier (TSB) model to explain the anomalously large leakage currents. Following this, attempts to reduce the leakage currents are presented and discussed. Then, as an example of gas-phase sensors using Schottky barriers, a Pd/AlGaN/GaN Schottky diode hydrogen sensor developed recently by our group is presented with a discussion on the sensing mechanism and related current transport. On the other hand, in liquid-phase sensors, contact is made between liquid and semiconductor which is regarded as a kind of Schottky barrier by electrochemists. As one of such liquid-phase sensors, open-gate AlGaN/GaN heterostructure field effect transistor (HFET) pH sensor developed recently by our group is presented. Finally, a brief summary is given together with some remarks for future research.     

生物分子膜门电极AlGaN/GaN高电子迁移率晶体管(HEMT)生物传感器研究

设计并制作了结构尺寸为毫米量级的AlGaN/GaN高电子迁移率晶体管(HEMT)生物传感器,采用数值分析的方法分析了器件传感区域长度与宽度比值及待测物调控二维电子气(2DEG)距离与感测信号之间的关系,给出了结构尺寸为毫米量级的AlGaN/GaN HEMT生物传感器的设计依据,以不同浓度的前列腺特异性抗原(PSA)为待测物,对制作的AlGaN/GaN HEMT生物传感器进行了初步测量,测试结果表明,在50 mV的电压下,毫米量级的AlGaN/GaN HEMT生物传感器的对PSA的探测极限低于0.1 pg/ml.实验表明毫米量级的AlGaN/GaN HEMT生物传感器具有灵敏度高,易于集成等优点,具备良好的应用前景.     

Directly extracting both threshold voltage and series resistance from the conductance-voltage curve of an AlGaN/GaN Schottky diode

An Ni/Au Schottky contact on an AlGaN/GaN heterostructure has been prepared. By using the peak-conductance model, the threshold voltage and the series resistance of the AlGaN/GaN diode are simultaneously extracted from the conductance-voltage (G-V) curve and found to be in good agreement with the ones obtained by using the capacitance-voltage (C-V) curve integration and the plot of dV/d(ln I) versus current I. Thus, a method of directly and simultaneously extracting both the threshold voltage and the series resistance from the conductance-voltage curve for the AlGaN/GaN Schottky diode is developed.     

AlGaN/GaN肖特基结参数分析与电流运输机理研究

通过对AlGaN/GaN HEMT器件肖特基栅电流输运机理的研究,在变温下采用I-V法对AlGaN/GaN上的Ni/Au肖特基势垒高度和理想因子进行了计算. 通过对不同电流机理的分立研究,得到了更为准确的势垒高度值_b. 通过分析温度在300—550K之间肖特基反向泄漏电流的特性,得出结论：AlGaN材料的表面漏电不是HEMT器件反向泄漏电流的主要来源. 关键词： AlGaN/GaN异质结 肖特基结 理想因子     

A simple method of extracting the polarization charge density in the A1GaN/GaN heterostructure from current-voltage and capacitance-voltage characteristics

An Ni Schottky contact on the AlGaN/GaN heterostructure is fabricated. The flat-band voltage for the Schottky contact on the AlGaN/GaN heterostructure is obtained from the forward current-voltage characteristics. With the measured capacitance-voltage curve and the flat-band voltage, the polarization charge density in the AlGaN/GaN heterostructure is investigated, and a simple formula for calculating the polarization charge density is obtained and analyzed. With the approach described in this paper, the obtained polarization charge density agrees well with the one calculated by self-consistently solving Schrodinger’s and Poisson’s equations.     

Effect of CO on Characteristics of AlGaN/GaN Schottky Diode

Pt Schottky diode gas sensors for CO are fabricated using A1GaN/GaN high electron mobility transistor（HEMTs）structure. The diodes show a remarkable sensor signal （3 mA, in N2, 2mA in air ambient） biased 2 V after 1% CO is introduced at 50℃. The Schottky barrier heights decrease for 36meV and 27meV in the two cases respectively. The devices exhibit a slow recovery characteristic in air ambient but almost none in the background of pure N2, which reveals that oxygen molecules could accelerate the desorption of CO and offer restrictions to CO detection.     

Influence of Schottky drain contacts on the strained AlGaN barrier layer of AlGaN/AlN/GaN heterostructure field-effect transistors

Rectangular Schottky drain AlGaN/AlN/GaN heterostructure field-effect transistors (HFETs) with different gate contact areas and conventional AlGaN/AlN/GaN HFETs as control were both fabricated with same size. It was found there is a significant difference between Schottky drain AlGaN/AlN/GaN HFETs and the control group both in drain series resistance and in two-dimensional electron gas (2DEG) electron mobility in the gate-drain channel. We attribute this to the different influence of Ohmic drain contacts and Schottky drain contacts on the strained AlGaN barrier layer. For conventional AlGaN/AlN/GaN HFETs, annealing drain Ohmic contacts gives rise to a strain variation in the AlGaN barrier layer between the gate contacts and the drain contacts, and results in strong polarization Coulomb field scattering in this region. In Schottky drain AlGaN/AlN/GaN HFETs, the strain in the AlGaN barrier layer is distributed more regularly.     

Comparison of electrical characteristic between AlN/GaN and AlGaN/GaN heterostructure Schottky diodes

Ni/Au Schottky contacts on AlN/GaN and AlGaN/GaN heterostructures are fabricated.Based on the measured current–voltage and capacitance–voltage curves,the electrical characteristics of AlN/GaN Schottky diode,such as Schottky barrier height,turn-on voltage,reverse breakdown voltage,ideal factor,and the current-transport mechanism,are analyzed and then compared with those of an AlGaN/GaN diode by self-consistently solving Schrdinger’s and Poisson’s equations.It is found that the dislocation-governed tunneling is dominant for both AlN/GaN and AlGaN/GaN Schottky diodes.However,more dislocation defects and a thinner barrier layer for AlN/GaN heterostructure results in a larger tunneling probability,and causes a larger leakage current and lower reverse breakdown voltage,even though the Schottky barrier height of AlN/GaN Schottky diode is calculated to be higher that of an AlGaN/GaN diode.     

Performance Improvement of GaN Based Schottky Barrier Ultraviolet Photodetector by Adding a Thin A1GaN Window Layer

We propose a new structure of GaN based Schottky barrier ultraviolet photodetector, in which a thin n-type A1GaN window layer is added on the conventional n^--GaN/n^＋-GaN device structure. The performance of the Schottky barrier ultraviolet photodetector is found to be improved by the new structure. The simulation result shows that the new structure can reduce the negative effect of surface states on the performance of Schottky barrier GaN photodetectors, improving the quantum efficiency and decreasing the dark current. The investigations suggest that the new photodetector can exhibit a better responsivity by choosing a suitably high carrier concentration and thin thickness for the A1GaN window layer.     

A simple method of extracting the polarization charge density in the AlGaN/GaN heterostructure from current—voltage and capacitance—voltage characteristics

An Ni Schottky contact on the AlGaN/GaN heterostructure is fabricated. The flat-band voltage for the Schottky contact on the AlGaN/GaN heterostructure is obtained from the forward current-voltage characteristics. With the measured capacitance-voltage curve and the flat-band voltage, the polarization charge density in the AlGaN/GaN heterostructure is investigated, and a simple formula for calculating the polarization charge density is obtained and analyzed. With the approach described in this paper, the obtained polarization charge density agrees well with the one calculated by self-consistently solving Schrodinger's and Poisson's equations.     

AlGaN/GaN高电子迁移率晶体管肖特基高温退火机理研究

在不同应力条件下,研究了AlGaN/GaN高电子迁移率晶体管高温退火前后的电流崩塌、栅泄漏电流以及击穿电压的变化.结果表明,AlGaN/GaN高电子迁移率晶体管通过肖特基高温退火以后,器件的特性得到很大的改善.利用电镜扫描(SEM)和X射线光电子能谱(XPS)对高温退火前、后的肖特基接触界面进行深入分析,发现器件经过高温退火后,Ni和AlGaN层之间介质的去除,并且AlGaN材料表面附近的陷阱减少,使得肖特基有效势垒提高,从而提高器件的电学特性. 关键词： AlGaN/GaN高电子迁移率晶体管 肖特基接触 界面陷阱     

Distribution of donor states on the surfaceof AlGaN/GaN heterostructures

The uniform distribution model of the surface donor states in AlGaN/GaN heterostructures has been widely used in the theoretical calculation. A common and a triple-channel AlGaN/GaN heterostructure Schottky barrier diodes have been fabricated to verify the models, but the calculation results show the uniform distribution model can not provide enough electrons to form three separate 2DEGs in the triple-channel AlGaN/GaN heterostructure. Our experiments indicate the uniform distribution model is not quite right, especially for the multiple-channel AlGaN/GaN heterostructures. Besides, it is found the exponential distribution model possibly matches the actual distribution of the surface donor states better, which allows the 2DEG to form in each channel structure during the calculation. The exponential distribution model would be helpful in the research field.     

Surface and interface electronic properties of group III-nitride heterostructures

For group III-nitrides with wurtzite structure the presence of fixed polarization interface charges yields new challenges in order to understand and control Schottky barrier heights, band offsets and 2D confinement in heterostructure FETs. In this short review experimental results obtained by in situ photoemission spectroscopy on MBE AlGaN/GaN heterostructures grown on 6H–SiC are discussed, with emphasis on the presence and interplay of surface electronic states. Schrödinger–Poisson calculations are performed to get the complete band scheme at the selected heterojunctions. Results on the polarity dependence of Pt/GaN Schottky barrier values from the literature are also discussed.     

GaN基肖特基势垒二极管结构优化研究进展

作为宽禁带半导体器件,GaN基肖特基势垒二极管(SBD)有耐高压、耐高温、导通电阻小等优良特性,这使得它在电力电子等领域有广泛应用。本文首先综述了SBD发展要解决的问题;然后,介绍了GaN SBD结构、工作原理及结构优化研究进展;接下来,总结了AlGaN/GaN SBD结构、工作原理及结构优化研究进展,并着重从AlGaN/GaN SBD的外延片结构、肖特基电极结构以及边缘终端结构等角度,阐述了这些结构的优化对AlGaN/GaN SBD性能的影响;最后,对器件进一步的发展方向进行了展望。     

Impact of oxygen in electrical properties and hot-carrier stress-induced degradation of GaN high electron mobility transistors

The role of the oxygen in AlGaN/GaN high electron mobility transistors (HEMTs) before and after semi-on state stress was discussed. Comparing with the electrical characteristics of the devices in vacuum, air, and oxygen atmosphere, it is revealed that the oxygen has significant influence on the electric characteristics and the hot-carrier-stress-induced degradation of the device. Comparing with the situation in vacuum, the gate leakage increased an order of magnitude in oxygen and air atmosphere. Double gate structure was used to separate the barrier leakage and surface leakage of AlGaN/GaN HEMT it is found that surface leakage is the major influencing factor in gate leakage of SiN-passivated devices before and after semi-on state stress. During semi-on state stress in the oxygen atmosphere, the electric-field-driven oxidation process promoted the oxidation of the nitride layer, and the oxidation layer in the SiN/AlGaN interface leads to the decreasing of the surface leakage.     

Determination of the series resistance under the Schottky contacts of AlGaN/AlN/GaN Schottky barrier diodes

Rectangular AlGaN/AlN/GaN heterostructure field-effect transistors (HFETs) were fabricated, and the gate and the source of the HFETs consisted of AlGaN/AlN/GaN Schottky barrier diodes (SBDs). Based on the measured forward current-voltage and the capacitance-voltage characteristics of the AlGaN/AlN/GaN SBDs, the series resistance under the Schottky contacts (R_S) was calculated using the method of power consumption, which has been proved to be valid. Finally, the method of power consumption for calculating R_S was successfully used to study the two-dimensional electron gas electron mobility for a series of circular AlGaN/AlN/GaN SBDs. It is shown that the series resistance under the Schottky contacts cannot be neglected and is important for analysing and characterizing the AlGaN/AlN/GaN SBDs and the AlGaN/AlN/GaN HFETs.     

Ni/Au Schottky gate oxidation and BCB passivation for high-breakdown-voltage AlGaN/GaN HEMT

A new AlGaN/GaN high electron mobility transistor (HEMT) employing Ni/Au Schottky gate oxidation and benzocyclobutene (BCB) passivation is fabricated in order to increase a breakdown voltage and forward drain current. The Ni/Au Schottky gate metal with a thickness of 50/300 nm is oxidized under oxygen ambient at 500 C and the highly resistive NiO is formed at the gate edge. The leakage current of AlGaN/GaN HEMTs is decreased from 4.94 μA to 3.34 nA due to the formation of NiO. The BCB, which has a low dielectric constant, successfully passivates AlGaN/GaN HEMTs by suppressing electron injection into surface states. The BCB passivation layer has a low capacitance, so BCB passivation increases the switching speed of AlGaN/GaN HEMTs compared with silicon nitride passivation, which has a high dielectric constant. The forward drain current of a BCB-passivated device is 199 mA /mm, while that of an unpassivated device is 172 mA /mm due to the increase in two-dimensional electron gas (2DEG) charge.     

AlGaN/GaN heterostructure-based surface acoustic wave-structures for chemical sensors

We present a new approach in forming of interdigital surface acoustic wave-structures on AlGaN/GaN heterostructure to be applied in chemical sensors technology. This approach uses a selective self-aligned SF₆ plasma treatment of the AlGaN/GaN barrier layer to modify 2DEG density and surface field distribution in the range of interdigital transducers (IDTs) thus enabling SAW excitation. Secondary ion mass spectroscopy was applied to explain the modification of 2DEG density in the plasma treated AlGaN/GaN heterostructure. The initial results in the process technology and characterization are presented.     

AlGaN/GaN 高电子迁移率晶体管漏电流退化机理研究

本文首先制备了与AlGaN/GaN高电子迁移率晶体管 (HEMT) 结构与特性等效的AlGaN/GaN异质结肖特基二极管, 采用步进应力测试比较了不同栅压下器件漏电流的变化情况, 然后基于电流-电压和电容-电压测试验证了退化前后漏电流的传输机理, 并使用失效分析技术光发射显微镜 (EMMI) 观测器件表面的光发射, 研究了漏电流的时间依赖退化机理. 实验结果表明: 在栅压高于某临界值后, 器件漏电流随时间开始增加, 同时伴有较大的噪声. 将极化电场引入电流与电场的依赖关系后, 器件退化前后的 log(I_FT/E)与√E 都遵循良好的线性关系, 表明漏电流均由电子Frenkel-Poole (FP) 发射主导. 退化后 log(I_FT/E)与√E 曲线斜率的减小, 以及利用EMMI在栅边缘直接观察到了与缺陷存在对应关系的“热点”, 证明了漏电流退化的机理是: 高电场在AlGaN层中诱发了新的缺陷, 而缺陷密度的增加导致了FP发射电流I_FT的增加. 关键词： AlGaN/GaN 高电子迁移率晶体管 漏电流 退化机理     

Different influences of Schottky metal on the strain and relative permittivity of barrier layer between AlN/GaN and AlGaN/GaN heterostructure Schottky diodes

Ni/Au Schottky contacts on AlN/GaN and AlGaN/GaN heterostructures are fabricated.Based on the measured current–voltage and capacitance-voltage curves,the polarization sheet charge density and relative permittivity are analyzed and calculated by self-consistently solving Schrdinger’s and Poisson’s equations.It is found that the values of relative permittivity and polarization sheet charge density of AlN/GaN diode are both much smaller than the ones of AlGaN/GaN diode,and also much lower than the theoretical values.Moreover,by fitting the measured forward I–V curves,the extracted dislocations existing in the barrier layer of the AlN/GaN diode are found to be much more than those of the AlGaN/GaN diode.As a result,the conclusion can be made that compared with AlGaN/GaN diode the Schottky metal has an enhanced influence on the strain of the extremely thinner AlN barrier layer,which is attributed to the more dislocations.