共查询到8条相似文献,搜索用时 78 毫秒
1.
Offshore observation platforms are required to have great ability to resist waves when they are operating at sea. Investigation on the motion characteristics of the platforms in the sea can provide significant reference values during the platform design procedure. In this paper, a series of numerical simulation on the interaction of a triple-hulled offshore observation platform with different incident waves is carried out. All of the simulations are implemented utilizing our own solver naoe-FOAM-SJTU, which is based and developed on the open source tools of OpenFOAM. Duration curves of motion characteristics and loads acting on the platform are obtained, and a comparison between the results of the amplitude in different incident waves is presented. The results show that the solver is competent in the simulation of motion response of platforms in waves. 相似文献
2.
Mohammad Ali Lotfollahi-Yaghin 《Marine Structures》2011,24(3):239-260
Regarding the research efforts expended so far on the calculation of stress concentration factors (SCFs) in tubular joints, two major shortcomings can be noted: (a) significant effort has been devoted to the study of SCFs in various uni-planar connections. Nevertheless, for multi-planar joints which cover the majority of practical applications, very few investigations have been reported due to the complexity and high cost involved; (b) majority of these research works focused on the study of SCFs at certain positions such as the saddle, crown toe, and crown heel, and they have ignored the hot-spot stress (HSS) at other positions along the weld toe. In the present paper, effects of dimensionless geometrical parameters on the SCF distribution along the weld toe of main (outer) braces in the axially loaded right-angle two-planar tubular DKT-joints are investigated. In order to study the multi-planar effect, SCF distribution in two-planar joints is compared with the distribution in a uni-planar joint having the same geometrical properties. A complete set of SCF database is constructed based on the two-planar DKT-joint Finite element models which are verified against experimental results and the predictions of Lloyd’s Register (LR) equations. The FE models cover a wide range of geometrical parameters. Six new SCF parametric formulae are developed through nonlinear regression analyses for the accurate and reliable fatigue design of two-planar DKT-joints under axial loads. An assessment study of these equations is conducted against the experimental data, the original FEM database and the acceptance criteria recommended by the UK Department of Energy. 相似文献
3.
Stress concentration factors of multi-planar tubular KT-joints subjected to in-plane bending moments
Numerical research on the stress concentration factors (SCFs) in uniplanar tubular joints is abundantly reported in literature. However, it has been shown that SCF equations for uniplanar joints can lead to both under- or overestimation of the SCFs in multi-planar joints. In this paper, a parametric finite element study of 81 different three-planar KT joints subjected to five different in-plane bending loading conditions is performed. The effects of different non-dimensional geometrical parameters on the SCF values at the crown locations of the central and outer braces are studied. Based on nonlinear regression analyses of the finite element results, a new set of SCF equations is developed and presented. 相似文献
4.
5.
集装箱船舱口角隅应力集中系数的有限元分析的精度 总被引:2,自引:0,他引:2
集装箱船舱口角隅的应力集中是船舶结构强度的一个重要问题。随着有限元技术的发展,目前舱口角隅的应力集中系数大都可以通过有限元计算直接获得。由于有限元分析过程中存在着大量不确定性,通过控制其有限元分析各个步骤的质量来保证有限元分析的精度,已经成为一个重要的研究方向。本文利用现有有限元分析软件(ABAQUS),通过对不同模型简化方法的讨论,给出了正确计算舱口角隅结构应力集中系数的模型简化方法,并在此基础上讨论了网格尺度对应力集中系数的影响。 相似文献
6.
7.