Hydrogen generation from the hydrolysis of ammonia-borane using intrazeolite cobalt(0) nanoclusters catalyst

Previously being used as highly active catalyst in the hydrolysis of sodium borohydride, intrazeolite cobalt(0) nanoclusters were also employed as catalyst in the hydrolysis of ammonia-borane (H₃NBH₃). Intrazeolite cobalt(0) nanoclusters were found to be active catalyst in this hydrolysis reaction of ammonia-borane providing 5450 total turnovers at room temperature before deactivation. The results of the kinetic study shows that the catalytic hydrolysis of AB is first order with respect to the catalyst concentration and zero order with respect to substrate concentration. Activation parameters could be obtained from the evaluation of the rate constants at different temperature. The results reveal that intrazeolite cobalt(0) nanoclusters can be considered as promising candidate to be used as catalyst in developing highly efficient portable hydrogen generation systems using ammonia-borane as solid hydrogen storage material.     

Polymer-immobilized palladium supported on TiO2 (Pd-PVB-TiO2) as highly active and reusable catalyst for hydrogen generation from the hydrolysis of unstirred ammonia-borane solution

Herein we report the preparation, characterization and the catalytic use of the polymer-immobilized palladium catalyst supported on TiO₂ (Pd-PVB-TiO₂) in the hydrolysis of unstirred ammonia-borane solution. The polymer-immobilized palladium catalyst is stable enough to be isolated as solid materials and characterized by XRD, SEM, and EDX. The immobilized palladium catalyst supported on TiO₂ is found highly active, isolable, and reusable in the hydrolysis of unstirred ammonia-borane even at low concentrations and temperature. The work reported here also includes the full experimental details for the collection of a wealth of kinetic data to determine the activation energy (E_a = 55.9 kJ/mol) and the effects of catalyst and substrate concentration on the rate for the hydrolysis of unstirred ammonia-borane solution. Maximum H₂ generation rate of ∼642 mL H₂ min⁻¹ (g Pd)⁻¹ and ∼4367 mL H₂ min⁻¹ (g Pd)⁻¹ was measured by the hydrolysis of AB at 25 °C and 55 ± 0.5 °C, respectively.     

Hydrogen generation by hydrolysis of ammonia borane with a nanoporous cobalt-tungsten-boron-phosphorus catalyst supported on Ni foam

In this study, quaternary cobalt-tungsten-boron-phosphorus porous particles supported on Ni foam (Co-W-B-P/Ni), which are prepared through ultrasonification-assisted electroless deposition route, have been investigated as the catalyst for hydrogen generation (HG) from hydrolysis of ammonia borane (NH₃BH₃, AB). Compared with Ni-supported binary Co-B and ternary Co-W-B catalysts, the as-synthesized Co-W-B-P/Ni shows a higher HG rate. To optimize the preparation parameters, the molar ratio of NaBH₄/NaH₂PO₂·H₂O (B/P) and the concentration of Na₂WO₄·2H₂O (W) have been investigated and the catalyst prepared with B/P value of 1.5 and W concentration of 5 g L⁻¹ shows the highest activity. The results of kinetic studies show that the catalytic hydrolysis of AB is first order with respect to the catalyst and AB concentrations. By using the quaternary catalyst with a concentration of 0.5 wt % AB, a HG rate of 4.0 L min⁻¹ g⁻¹ is achieved at 30 °C. Moreover, the apparent activation energy for the quaternary catalyst is determined to be 29.0 kJ mol⁻¹, which is comparable to that of noble metal-based catalysts. These results indicate that the Co-W-B-P/Ni is a promising low-cost catalyst for on-board hydrogen generation from hydrolysis of borohydride.     

Water soluble nickel(0) and cobalt(0) nanoclusters stabilized by poly(4-styrenesulfonic acid-co-maleic acid): Highly active, durable and cost effective catalysts in hydrogen generation from the hydrolysis of ammonia borane

This paper reports the in-situ generation and catalytic activity of nickel(0) and cobalt(0) nanoclusters stabilized by poly(4-styrene sulfonic acid-co-maleic acid), PSSA-co-MA, in the hydrolysis of ammonia borane (AB). PSSA-co-MA stabilized nickel(0) (PSMA-Ni) and cobalt(0) nanoclusters (PSMA-Co) having average particle size of 2.1 ± 0.6 and 5.3 ± 1.6 nm, respectively, were generated by in-situ reduction of nickel(II) chloride or cobalt(II) chloride in an aquoues solution of NaBH₄/H₃NBH₃ in the presence of PSSA-co-MA. The in-situ generated nanoclusters were isolated from the reaction solution and characterized by UV-Vis, TEM, XRD and FT-IR techniques. Compared with the previous catalyst systems, PSMA-Ni and PSMA-Co are found to be highly active catalysts for hydrogen generation from the hydrolysis of AB with the turnover frequency values of 10.1 min⁻¹ for Ni and 25.7 min⁻¹ for Co. They are also very stable during the hydrolysis of AB providing 22450 and 17650 turnovers, respectively. The results of mercury poisoning experiments reveal that PSMA-Ni and PSMA-Co are heterogeneous catalysts in the hydrolysis of AB. Herein, we also report the results of a detailed kinetic study on the hydrogen generation from the hydrolysis of AB catalyzed by PSMA-Ni and PSMA-Co depending on catalyst concentration, substrate concentration, and temperature along with the activation parameters of catalytic hydrolysis of AB calculated from the kinetic data.     

Co-SiO2 nanosphere-catalyzed hydrolytic dehydrogenation of ammonia borane for chemical hydrogen storage

Cobalt clusters-silica nanospheres (15-30 nm) were synthesized using a Co(NH₃)₆Cl₃ template method in a polyoxyethylene-nonylphenyl ether/cyclohexane reversed micelle system followed by in situ reduction in aqueous NaBH₄/NH₃BH₃ solutions. The cobalt clusters are located either inside or on the outer surface of the silica nanospheres as shown by the transmission electron microscope (TEM)/energy dispersive X-ray (EDX) and X-ray photoelectron spectroscopy (XPS) measurements. The cobalt-silica nanospheres have a high catalytic activity for the hydrolysis of ammonia borane that generates a stoichiometric amount of hydrogen, and can be efficiently cycled and reused 10 times without any significant loss of the catalytic activity.     

Hydrogen evolution from hydrolysis of ammonia borane catalyzed by Rh/g-C3N4 under mild conditions

Developing effective catalysts for hydrogen evolution from hydrolysis of ammonia borane (AB) is of great significance considering the useful applications of hydrogen. Herein, graphitic carbon nitride (g-C₃N₄) prepared through the simply pyrolysis of urea was employed as a support for Rh nanoparticles (NPs) stabilization. The in-situ generated Rh NPs supported on g-C₃N₄ with an average size of 3.1 nm were investigated as catalysts for hydrogen generation from the hydrolysis of AB under mild conditions. The Rh/g-C₃N₄ catalyst exhibits a high turnover frequency of 969 mol H₂· (min·mol_Rh)^?1 and a low activation energy of 24.2 kJ/mol. The results of the kinetic studies show that the catalytic hydrolysis of AB over the Rh/g-C₃N₄ catalyst is a zero-order reaction with the AB concentration and a first-order reaction with the Rh concentration. This work demonstrates that g-C₃N₄ is a useful support to design and synthesis of effective Rh-based catalyst for hydrogen-based applications.     

Hydrogen generation by sodium borohydride hydrolysis on nanosized CoB catalysts supported on TiO2, Al2O3 and CeO2

A series of nanosized CoB catalysts supported on TiO₂, Al₂O₃, and CeO₂ were prepared. The catalysts were prepared by incipient-wetness impregnation. The sample was dried at 100 °C and then dispersed in water and reduced by an aqueous solution of sodium borohydrate at room temperature. An unsupported CoB cluster was used for comparison. The activities of the supported CoB catalysts were higher than that of unsupported one. The reaction rates of these supported CoB catalysts decreased in the order: CoB/TiO₂ > CoB/Al₂O₃ > CoB/CeO₂ > unsupported CoB. The reaction kinetics on various catalysts was also investigated.     

Fast hydrogen generation from NaBH4 hydrolysis catalyzed by carbon aerogels supported cobalt nanoparticles

Carbon aerogels (CAs) with oxygen-rich functional groups and high surface area are synthesized by hydrothermal treatment of glucose in the presence of boric acid, and are used as the support for loading cobalt catalysts (CAs/Co). Cobalt nanoparticles distribute uniformly on the surface of ACs, creating highly dispersed catalytic active sites for hydrolysis of alkaline sodium borohydride solution. A rapid hydrogen generation rate of 11.22 L min⁻¹ g_(cobalt)⁻¹ is achieved at 25 °C by hydrolysis of 1 wt% NaBH₄ solution containing 10 wt% NaOH and 20 mg the CAs/Co catalyst with a cobalt loading of 18.71 wt%. Furthermore, various influences are systematically investigated to reveal the hydrolysis kinetics characteristics. The activation energy is found to be 38.4 kJ mol⁻¹. Furthermore, the CAs/Co catalyst can be reusable and its activity almost remains unchanged after recycling, indicating its promising applications in fuel cell.     

Silica embedded cobalt(0) nanoclusters: Efficient, stable and cost effective catalyst for hydrogen generation from the hydrolysis of ammonia borane

Cobalt(0) nanoclusters embedded in silica (Co@SiO₂) were prepared by a facile two-step procedure. In the first step, the hydrogenphosphate anion (HPO₄²⁻) stabilized cobalt(0) nanoclusters were in situ generated from the reduction of cobalt(II) chloride during the hydrolysis of sodium borohydride (NaBH₄) in the presence of stabilizer. Next, HPO₄²⁻ anion-stabilized cobalt(0) nanoclusters were embedded in silica formed by in situ hydrolysis and condensation of tetraethylorthosilicate added as ethanol solution. Co@SiO₂ can be separated from the solution by vacuum filtration and characterized by UV-Vis electronic absorption spectroscopy, TEM, SEM-EDX, ATR-IR and ICP-OES techniques. Co@SiO₂ are found to be highly active and stable catalysts in the hydrolysis of ammonia borane (AB) even at low cobalt concentration and room temperature. They provide an initial turnover frequency of 13.3 min⁻¹ and 24,400 total turnovers over 52 h in the hydrolysis of AB at 25.0 ± 0.5 °C. Moreover, Co@SiO₂ retain 72% and 74% of the initial activity after ten runs recyclability and five cycles reusability test in the hydrolysis of AB, respectively. The kinetics of hydrogen generation from the hydrolysis of AB catalyzed by Co@SiO₂ was studied depending on the catalyst concentration, substrate concentration, and temperature. The activation parameters of this catalytic reaction were also determined from the evaluation of the kinetic data.     

Hydrogen generation by hydrolysis of sodium borohydride on CoB/SiO2 catalyst

Generation of hydrogen by hydrolysis of alkali metal hydrides has attracted attention. Unsupported CoB catalyst demonstrated high activity for the catalytic hydrolysis of NaBH₄ solution. However, unsupported CoB nanoparticles were easy to aggregate and difficult to reuse. To overcome these drawbacks, CoB/SiO₂ was prepared and tested for this reaction. Cobalt (II) acetate precursor was loaded onto the SiO₂ support by incipient-wetness impregnation method. After drying at 100 °C, Co cations were deposited on the support. The dried sample was then dispersed in methanol/water solution and then fully reduced by NaBH₄ at room temperature. The catalyst was characterized by N₂ sorption, XRD and XPS. The results indicated that the CoB on SiO₂ possessed amorphous structure. B and Co existed both in elemental and oxidized states. SiO₂ not only affected the surface compositions of CoB, but also affected the electronic states of Co and B. B⁰ could donate partial electron to Co⁰. The structure effect caused by the SiO₂ support helped to prevent CoB nanocluster from aggregation and therefore the activity increased significantly on hydrolysis of alkaline NaBH₄ solution. The CoB/SiO₂ catalyst showed much higher activity than the unsupported CoB catalyst. At 298 K, the hydrogen generation rate on CoB/SiO₂ catalyst was 4 times more than that on the unsupported CoB catalyst. The hydrogen generation rate was as high as 10,586 mL min⁻¹ g⁻¹ catalyst at 298 K. CoB/SiO₂ is a very promising catalyst for this reaction.     

Hydroxyapatite-supported palladium(0) nanoclusters as effective and reusable catalyst for hydrogen generation from the hydrolysis of ammonia-borane

Herein we report the preparation, characterization and catalytic use of hydroxyapatite-supported palladium(0) nanoclusters in the hydrolysis of ammonia-borane. Palladium(0) nanoclusters were formed in situ from the reduction of palladium(II) ion exchanged hydroxyapatite during the hydrolysis of ammonia-borane and supported on hydroxyapatite. The hydroxyapatite-supported palladium(0) nanoclusters are stable enough to be isolated as solid materials and characterized by using a combination of advanced analytical techniques. They are isolable, redispersible and reusable as an active catalyst in the hydrolysis of ammonia-borane even at low concentration and temperature. They provide a maximum hydrogen generation rate of ∼1425 mL H₂ min⁻¹ (g Pd)⁻¹ and 12300 turnovers in the hydrolysis of ammonia-borane at 25 ± 0.1 °C before deactivation. The work reported here also includes the full experimental details for the collection of a wealth of kinetic data to determine the activation energy (E_a = 54.8 ± 2.2 kJ/mol) and the effect of catalyst concentration on the rate for the catalytic hydrolysis of ammonia-borane.     

Hydrogen generation by hydrolysis of Mg-Mg2Si composite and enhanced kinetics performance from introducing of MgCl2 and Si

This paper reported the performance and mechanism of hydrogen generation via hydrolysis of ball-milled Mg-Mg₂Si composite (5.3 wt % Si-94.7 wt % Mg) in deionized water and in MgCl₂ solution. The results showed that the obtained Mg-Mg₂Si composite presented relatively higher hydrogen generation performance than pure magnesium. Adoption of 0.5 M MgCl₂ solution to replace deionized water sufficiently and vastly enhanced the hydrolysis properties of the Mg-Mg₂Si composite. The composite in 0.5 M MgCl₂ solution generated 445 mL/g hydrogen in 5 min, 688 mL/g hydrogen in 10 min and 889 mL/g hydrogen (conversion rate 99%) in 40 min at 328 K. This remarkable improvement is due to that the addition of Si element in the composite and the introduction of MgCl₂ in solution, as well as the special preparation process of the materials, could decrease the formation of continuous magnesium hydroxide passive layer on the particle surface, directly or indirectly. Moreover, the apparent activation energies for composite hydrolysis in deionized water, in 0.5 and 2.0 M MgCl₂ solution were calculated to be 30.1 ± 0.6, 9.5 ± 0.1 and 3.7 ± 0.2 kJ/mol, respectively. This work demonstrates that the hydrogen generation system based on low-cost and high-performance Mg-Mg₂Si composite is very applicable and promising; and it may open a new avenue for onsite hydrogen supply.     

Hollow Ni-SiO2 nanosphere-catalyzed hydrolytic dehydrogenation of ammonia borane for chemical hydrogen storage

Nickel clusters contained within silica nanospheres (20-30 nm) were synthesized by using a Ni(NH₃)₆Cl₂ crystal template method in a polyoxyethylene-nonylphenyl ether/cyclohexane reversed micelle system followed by an in situ reduction in aqueous NaBH₄/NH₃BH₃ solutions. Metallic nickel clusters exist inside the SiO₂ nanospheres prepared by the method while oxidized nickel clusters prepared by the conventional impregnation method were supported on the outer surface of silica as shown in the results of transmission electron microscope (TEM)/energy dispersive X-ray (EDX) and X-ray photoelectron spectroscopy (XPS) measurements. The nickel clusters inside of silica nanospheres show higher catalytic activity for hydrolysis of ammonia borane to generate stoichiometric amount of hydrogen than the supported nickel catalysts.     

Hydrogen generation from Al/NaBH4 hydrolysis promoted by Li-NiCl2 additives

On-demand hydrogen generation from solid-state Al/NaBH₄ hydrolysis activated by Li-NiCl₂ additives are elaborated in the present paper. Hydrogen generation amount and rate can be regulated by changing Al/NaBH₄ weight ratio, Li and NiCl₂ amount, hydrolytic temperature, etc. The optimized Al−10 wt.% Li−15 wt.% NiCl₂/NaBH₄ mixture (weight ratio of 1:1) yields 1778 ml hydrogen/1 g mixture with 100% efficiency within 50 min at 323 K. The improved hydrolytic performance comes from the effect of Li-NiCl₂ additives, which decrease aluminum particle size in the milling process and produce the catalytic promoter BNi₂/Al(OH)₃ in the hydrolytic process. Compared with the conventional reaction of Al and NaBH₄ in water, there is an interaction of Al/NaBH₄ hydrolysis which improves the hydrolytic kinetics of Al/NaBH₄ via the catalytic effect of hydrolysis by-products Al(OH)₃, BNi₂, and NaBO₂. The Al/NaBH₄ mixture may be applied as a portable hydrogen generation material. Our experimental data lay a foundation for designing practical hydrogen generators.     

Zeolite confined palladium(0) nanoclusters as effective and reusable catalyst for hydrogen generation from the hydrolysis of ammonia-borane

Zeolite confined palladium(0) nanoclusters were prepared by a two step procedure: incorporation of Pd²⁺ ions into the zeolite-Y by ion-exchange followed by the reduction of Pd²⁺ ions in the supercages of zeolite-Y with sodium borohydride at room temperature. Zeolite confined palladium(0) nanoclusters are stable enough to be isolated as solid materials and characterized by ICP-OES, XRD, HRTEM, SEM, X-ray photoelectron spectroscopy and N₂ adsorption technique. These nanoclusters are isolable, redispersible and reusable as an active catalyst in the hydrolysis of ammonia-borane solution. Zeolite confined palladium(0) nanoclusters provide 15,600 turnovers in hydrogen generation from the hydrolysis of ammonia-borane at 25.0 ± 0.1 °C.     

Hydrogen production from hydrolysis of ammonia borane with limited water supply

Effect of limited water supply to hydrolysis of ammonia borane for hydrogen evolution is studied over the cases in which the initial molar ratio of water to ammonia borane (H₂O/AB) is set at 1.28, 2.57 and 4.50. The conversion efficiency of ammonia borane to hydrogen is estimated from the accumulated volume of produced hydrogen gas and the quantitative analysis of hydrolysate by solid-state ¹¹B NMR. Characteristics of hydrogen evolution are significantly influenced by both water dosage and injection rate of water. In the case that water is a limiting agent, namely, H₂O/AB = 1.28, less hydrogen is produced than that predicted stoichiometrically. In contrast, conversion efficiency of ammonia borane reaches nearly 100% for the case with H₂O/AB = 4.50. Injection rate of water to ammonia borane also affect profoundly the produced volume and production rate of hydrogen, if water is used as a limiting agent in the hydrolysis of ammonia borane. Nonetheless, boric acid and metaboric acid are found to be the dominant products in the hydrolysate from XRD, FT-IR and solid-state ¹¹B NMR analysis. The hydrogen storage capacity using limited water supply in this work could reach as high as about 5.33 wt%, based on combined mass of reactants and catalyst.     

Hydrogen generation by hydrolysis of NaBH4

The hydrolysis of sodium-borohydride (SBH) to produce hydrogen has been studied at various temperatures using salts of nickel (II) or iron (III) as catalyst. Excess of water has been added to a mixture of solid SBH and catalyst to start hydrolysis reaction and the evolved hydrogen measured as a function of time. After a sudden peak a constant hydrogen flow was observed when Ni is used as catalyst. The activation energy has been evaluated from the dependence of the reaction time and of the hydrogen flow on the inverse of temperature. If Ni is substituted by a Fe based catalyst, after the initial increase, a different shape is observed in the hydrogen flow: it reaches a maximum and then monotonously decrease to zero. The different shape has been related to the different activity of the catalyst. The reaction activation energy was evaluated to be 73 KJ/mol.     

CoMoB nanoparticles supported on foam Ni as efficient catalysts for hydrogen generation from hydrolysis of ammonia borane solution

We report on CoMoB nanoparticles supported on foam Ni as catalysts for hydrogen generation from hydrolysis of ammonia borane (NH₃BH₃) solution. The CoMoB/foam Ni catalysts with different molar ratios of Co²⁺and MoO₄²⁻ were synthesized via the electroless-deposition technique at ambient temperature. In order to analyze the phase composition, chemical composition, microstructure, and electron bonding structure of the as-prepared samples, powder X–ray diffraction (XRD), inductively coupled plasma-mass spectroscopy (ICP-MS), scanning electron microscopy (SEM), atomic force microscopy (AFM) and X-ray photoelectron spectroscopy (XPS) were used. The results showed that CoMoB nanoparticles were variously dispersed on the surface of the foam Ni and the catalytic activity correlated with the molar ratio of Co²⁺ and MoO₄²⁻. The highest hydrogen generation rate was 5331.0 mL min⁻¹ g_cat⁻¹ at 298 K, and the activation energy was calculated to be 45.5 kJ mol⁻¹ toward the hydrolysis of NH₃BH₃ solution. The better catalytic activity was largely attributed to the smaller particle size, higher surface roughness and the novel three-dimensional cone-like architectures of the obtained samples. The kinetic results show that the hydrolysis of NH₃BH₃ is a first-order reaction in catalyst concentration. In addition, the reusability experiment exhibited that the catalytic activity was reduced after 5 cycles and the reason of the decay was also investigated.     

Hydrogen generation from sodium borohydride hydrolysis by multi-walled carbon nanotube supported platinum catalyst: A kinetic study

In this study, it is aimed to investigate hydrogen (H₂) generation from sodium borohydride (NaBH₄) hydrolysis by multi-walled carbon nanotube supported platinum catalyst (Pt/MWCNT) under various conditions (0–0.03 g Pt amount catalyst, 2.58–5.03 wt % NaBH₄, and 27–67 °C) in detail. For comparison, carbon supported platinum (Pt/C) commercial catalyst was used for H₂ generation experiments under the same conditions. The reaction rate of the experiments was described by a power law model which depends on the temperature of the reaction and concentrations of NaBH₄. Kinetic studies of both Pt/MWCNT and Pt/C catalysts were done and activation energies, which is the required minimum energy to overcome the energy barrier, were found as 27 kJ/mol and 36 kJ/mol, respectively. Pt/MWCNT catalyst is accelerated the reaction less than Pt/C catalyst while Pt/MWCNT is more efficient than Pt/C catalyst, they are approximately 98% and 95%, respectively. According to the results of experiments and the kinetic study, the reaction system based on NaBH₄ in the presence of Pt/MWCNT catalyst can be a potential hydrogen generation system for portable applications of proton exchange membrane fuel cell (PEMFC).