Entropy analysis of unsteady MHD three-dimensional flow of Williamson nanofluid over a convectively heated stretching sheet

This article addresses an investigation of the entropy analysis of Williamson nanofluid flow in the presence of gyrotactic microorganisms by considering variable viscosity and thermal conductivity over a convectively heated bidirectionally stretchable surface. Heat and mass transfer phenomena have been incorporated by taking into account the thermal radiation, heat source or sink, viscous dissipation, Brownian motion, and thermophoretic effects. The representing equations are nonlinear coupled partial differential equations and these equations are shaped into a set of ordinary differential equations via a suitable similarity transformation. The arising set of ordinary differential equations was then worked out by adopting a well-known scheme, namely the shooting method along with the Runge-Kutta-Felberge integration technique. The effects of flow and heat transfer controlling parameters on the solution variables are depicted and analyzed through the graphical presentation. The survey finds that magnifying viscosity parameter, Weissenberg number representing the non-Newtonian Williamson parameter cause to retard the velocity field in both the directions and thermal conductivity parameter causes to reduce fluid temperature. The study also recognizes that enhancing magnetic parameters and thermal conductivity parameters slow down the heat transfer rate. The entropy production of the system is estimated through the Bejan number. It is noticeable that the Bejan number is eminently dependent on the heat generation parameter, thermal radiation parameter, viscosity parameter, thermal conductivity parameter, and Biot number. The skillful accomplishment of the present heat and mass transfer system is achieved through the exteriorized choice of the pertinent parameters.     

Thermophoresis and Brownian motion effects on Williamson nanofluid flow past a stretching surface with thermal radiation and chemical reaction

The heat transfer mechanism of nanofluids has numerous industrial applications owing to the non-Newtonian behavior and has been exercised as a thermophysical phenomena in presence of thermal radiation. The present paper deals with the thermal transfer characteristics of time-independent magnetohydrodynamics Williamson fluid past a stretching surface in presence of the reaction of chemical equilibrium is dealt. The flow constitutive nonlinear partial differential coupled equations are transmitted into ordinary differential equalities by employing relevant similarity transmutations. These deduced equations are determined by using the Runge–Kutta numerical technique with a shooting approach with the aid of MATLAB software. Influences of distinct pertinent flow parameters like an inclined uniform magnetic field, Soret number, heat generation/absorption, and Schmidt number constrained to convective boundary condition is displayed through graphs with relevant physical interpretations. Computed numerical values for the friction factor coefficient, local Nusselt parameter, and Sherwood number are tabulated.      

Influence of variable viscosity and thermal conductivity,hydrodynamic, and thermal slips on magnetohydrodynamic micropolar flow: A numerical study

Thermophysical and wall‐slip effects arise in many areas of nuclear technology. Motivated by such applications, in this article, the collective influence of variable‐viscosity, thermal conductivity, velocity and thermal slip effects on a steady two‐dimensional magnetohydrodynamic micropolar fluid over a stretching sheet is analyzed numerically. The governing nonlinear partial differential equations have been converted into a system of nonlinear ordinary differential equations using suitable coordinate transformations. The numerical solutions of the problem are expressed in the form of nondimensional velocity and temperature profiles and discussed from their graphical representations. The Nachtsheim‐Swigert shooting iteration technique together with the sixth‐order Runge‐Kutta integration scheme has been applied for the numerical solution. A comparison with the existing results has been done, and an excellent agreement is found. Further validation with the Adomian decomposition method is included for the general model. Interesting features in the heat and momentum characteristics are explored. It is found that a greater thermal slip and thermal conductivity elevate thermal boundary layer thickness. Increasing Prandtl number enhances the Nusselt number at the wall but reduces wall couple stress (microrotation gradient). Temperatures are enhanced with both the magnetic field and viscosity parameter. Increasing momentum (hydrodynamic) slip is found to accelerate the flow and elevate temperatures.     

Effects of Cattaneo–Christov heat flux analysis on heat and mass transport of Casson nanoliquid past an accelerating penetrable plate with thermal radiation and Soret–Dufour mechanism

In this analysis, the effect of Catteneo–Christov model on heat alongside mass transport magnetohydrodynamics of a Casson nanoliquid with thermal radiation and Soret–Dufour mechanism is considered. The fluid flow is considered through porous media as the thermophysical attributes such as viscosity along with thermal conductivity are considered to be constant. Suitable similarity transformations were employed on the governing coupled flow equation to yield total differential equations (ODE). An accurate and newly developed spectral method called spectral homotopy analysis method (SHAM) was employed to provide solution to the simplified equations. The numerical method of homotopy analysis method (HAM) is SHAM. SHAM portrays the division of nonlinear equations into linear as well as nonlinear parts. The findings in this study show that an increment in the Casson parameter is seen to elevate the velocity plot at the wall and lessen the velocity far away from the plate. An increase in the Brownian motion and thermophoresis term is observed to speed up the local skin friction coefficient.     

Thermal radiation and diffusion effects in MHD Williamson and Casson fluid flows past a slendering stretching surface

The article is presented to analyze the magnetohydrodynamic Casson and Williamson fluids flow over a stretched surface of variable thickness by including the conditions of thermal radiation, velocity slip, temperature, and concentration slip. The equations governing the flow characteristics are transformed to ordinary differential equations by applying similarity transformations. The solution of the simplified equations is obtained by the numerical bvp5c Matlab package. The behavior for Williamson and Casson fluid cases is explored and discussed with the impact of sundry parameters on the flowing fluid, thermal, and diffusion fields. The profiles under the impact of parameters are depicted through graphs. Also, we evaluated the performance of local Nusselt and Sherwood numbers along with the friction of the wall and are displayed through tables. We found that the temperature and mass transfer distribution is low in Williamson fluid when compared to Casson fluid flow. The computed results indicate that the flow, thermal and concentration boundary layer characteristics of Williamson and Casson fluids are not unique.     

Effects of heat and mass transfer on MHD nonlinear free convection non-Newtonian fluids flow embedded in a thermally stratified porous medium

This communication examines heat alongside mass transport in a nonlinear free convection magnetohydrodynamics (MHD) non-Newtonian fluid flow with thermal radiation and heat generation deep-rooted in a thermally stratified penetrable medium. The Casson and Williamson fluid considered in this communication flos simultaneously across the boundary layer and are mixed together. The model of heat alongside mass transport is set up with chemical reaction and thermal radiation alongside heat generation to form a system of partial differential equations (PDEs). Appropriate similarity variables are used to simplify the PDEs to obtain systems of coupled ordinary differential equations. An efficiently developed numerical approach called the spectral homotopy analysis method was used in providing solutions to the transformed equations. A large value of Casson term is observed to degenerate the velocity plot while the Williamson parameter enhances the velocity profile. The parameter of thermal stratification is found to enhance the rate of heat transport within the boundary layer. An incremental value of the magnetic parameter declines the velocity of the fluid and the entire boundary layer thickness. The present result was compared with previous studies and was seen to be in good agreement.     

Thermochemistry and viscous heat dissipative effects on unsteady upper-convected Maxwell fluid flow past a stretching vertical plate with thermophysical variables

In this paper, unsteady upper-convected Maxwell fluid flow with variability in viscosity, thermal conductivity, and mass diffusivity is presented. The effects of chemical reaction, internal heat generation, and viscous dissipation with respect to variability properties were explored. The governing partial differential equations were transformed with the appropriate similarity transformation variables into nonlinear coupled ordinary differential equations. The spectral collocation method was used to solve the resulting ordinary differential equations. Hence, the effects of various parameters such as temperature-dependent viscosity and thermal conductivity, mass diffusivity parameters among others on velocity, temperature, concentration, skin friction, local heat and mass transfers were presented in graphs and tables. It is seen that heat and molecules of the fluid disperse faster as a result of destructive chemical reaction, while, the temperature-dependent viscosity and thermal conductivity gave increasing profiles of the momentum and thermal boundary layer. The viscous dissipative parameter generates heat and yields a buoyancy force in consequence.     

Symmetry analysis of MHD Casson fluid flow for heat and mass transfer near a stagnation point over a linearly stretching sheet with variable viscosity and thermal conductivity

In this article, the impacts of variable viscosity and thermal conductivity on magnetohydrodynamic, heat transfer, and mass transfer flow of a Casson fluid are analyzed on a linearly stretching sheet inserted in a permeable medium along with heat source/sink and viscous dissipation. To reduce the ascendant partial differential equations into ordinary differential equations, Lie group transformation is utilized. Further, the fourth-order Runge–Kutta strategy is utilized to solve the ordinary differential equations numerically. The numerical results obtained for various parameters by employing coding in MATLAB programming are investigated and considered through graphical representation and tables. We anatomize the impacts of distinctive parameters on velocity, temperature, and concentration distributions.     

Mixed convection hybrid nanofluids flow of MWCNTs–Al2O3/engine oil over a spinning cone with variable viscosity and thermal conductivity

This work analyzed the effects of variable viscosity and thermal conductivity, with mixed convection, thermal radiation and viscous dissipation effects, on multiwalled carbon nanotubes (MWCNTs)–aluminum oxide (Al₂O₃)/engine oil hybrid nanofluid flow due to a vertically inverted spinning cone embedded in a porous medium. Using suitable similarity transformation, the boundary layer fluid flow governing equations are transformed into dimensionless systems of coupled nonlinear ordinary differential equations. Then, the solutions are obtained numerically employing the spectral relaxation method. The influences of involved parameters are examined, and the results are presented with graphs and tables. The obtained results disclose that both the tangential and azimuthal skin friction coefficients increase with increasing values of temperature-dependent viscosity and mixed convection parameters. The local heat transfer rate reduces with increasing values of the Eckert number and variable thermal conductivity parameter, whereas it enhances with greater values of the thermal radiation parameter. Generally, hybrid nanofluids of (MWCNTs–Al₂O₃)/engine oil show better flow distributions with good stability of thermal properties than MWCNTs/engine oil and Al₂O₃/engine oil mono-nanofluids.     

The effects of variable fluid properties and thermocapillarity on the flow of a thin film on an unsteady stretching sheet

The effects of variable viscosity, variable thermal conductivity and thermocapillarity on the flow and heat transfer in a laminar liquid film on a horizontal stretching sheet is analyzed. Using a similarity transformation the governing time dependent boundary layer equations for momentum and thermal energy are reduced to a set of coupled ordinary differential equations. The resulting five-parameter problem is solved numerically for some representative value of the parameters. It is shown that the film thickness increases with the increase in viscosity of the fluid. In other words viscosity resists film thinning. Further it is shown that more heat flows out of the liquid through the stretching surface when conductivity increases with temperature than that for the case when conductivity decreases with temperature.     

Mass and heat transport impact on the peristaltic flow of a Ree–Eyring liquid through variable properties for hemodynamic flow

Variable properties play a prominent role in analyzing the blood flow in narrow arteries. Specifically, considering the variation of thermal conductivity and viscosity helps in the understanding of the rheological behavior of blood and other biological fluids, such as urine, spermatozoa, and eye drops. Inspired by these applications, the current study incorporates the impact of variable thermal conductivity and viscosity for modeling the peristaltic flow of a Ree–Eyring liquid through a uniform compliant channel. The governing equations are nondimensionalized with the assistance of similarity transformations. The long-wavelength and small Reynolds wide variety approximation are utilized for solving the governing differential equations. Furthermore, the series solution method (perturbation technique) is utilized for solving the nonlinear temperature equation. The obtained results show that the velocity is greater in the case of the Newtonian liquid than that of the non-Newtonian liquid.     

The effects of variable fluid properties on the hydro-magnetic flow and heat transfer over a non-linearly stretching sheet

The influence of temperature-dependent fluid properties on the hydro-magnetic flow and heat transfer over a stretching surface is studied. The stretching velocity and the transverse magnetic field are assumed to vary as a power of the distance from the origin. It is assumed that the fluid viscosity and the thermal conductivity vary as an inverse function and linear function of temperature, respectively. Using the similarity transformation, the governing coupled non-linear partial differential equations are transformed into coupled non-linear ordinary differential equations and are solved numerically by the Keller–Box method. The governing equations of the problem show that the flow and heat transfer characteristics depend on five parameters, namely the stretching parameter, viscosity parameter, magnetic parameter, variable thermal conductivity parameter, and the Prandtl number. The numerical values obtained for the velocity, temperature, skin friction, and the Nusselt number are presented through graphs and tables for several sets of values of the parameters. The effects of the parameters on the flow and heat transfer characteristics are discussed.     

Impacts of variable thermal conductivity and mixed convective stagnation‐point flow in a couple stress nanofluid with viscous heating and heat source

The current study examines mixed (combined) convection stagnation‐point couple stress nanofluid over a stretched cylinder of variable thermal conductivity in the presence of viscous dissipation and internal heat source. The basic governing partial differential equations have been converted to coupled nonlinear differential equations by using adequate similarity transformations. By applying semi‐analytic technique (BVPh2.0), the equivalent ordinary differential equations are successfully solved and validated with a bvp4c solver. Graphs are presented to study the impact of various parameters on axial velocity, temperature, and volumetric nanofluid concentration profiles. The coefficient of skin friction (quantifying resistance) and the rate of heat and mass transfer on the surface due to flow variables are computed and explained. The axial velocity and momentum thickness are decreased with increasing couple stress parameter, whereas the reverse trend is noted with mixed convection and buoyancy ratio parameters. The temperature distribution increases for increasing Brownian motion and thermal conductivity parameter, whereas it decreases for increasing stagnation parameter.     

Thermophoretic movement,heat source,and sink influence on the Williamson fluid past a Riga surface with positive and negative Soret-Dufour mechanism

This study investigates the boundary layer motion of Williamson fluid over an electromagnetic with thermophoretic movement, variable thermal conductivity and viscosity, nonlinear radiation, and $\pm$Soret-Dufour influences. The real prediction of regional movement and temperature-dependent properties of the non-Newtonian fluids in real space (three-dimensional [3D]) becomes imperative due to their numerous industrial, engineering, and biomedical use. This flow motion is induced as a result of the introduced mechanism (Riga plate) capable of controlling a weakly hydromagnetic flow. To actualize the aim of this study, the formulated governing partial differential equations conveying the flow model of Williamson fluid in a 3D sense are transformed to systems of ordinary differential equations (ODEs) via applicable similarity variables. The reduced systems of ODEs are solved numerically by the collocation approach. Therein, the Riga surface is seen preventing the heat source/sink impact on the flow fields, the thermophoretic impact indicates a more accumulation of Williamson fluid particles in the cold region thus resulting in higher fluid concentration. Thermal variability energizes the energy field positively, momentum boundary layer reduction prevails for higher Williamson number while heat source dominates the temperature field and heat sink showcases its ability to enhance the fluid concentration in contrast to the heat source.     

Impact of Soret and Dufour on MHD mixed convective flow of non-Newtonian fluid over a coagulated surface

In the present study, we investigated the steady, two-dimensional mixed convective stagnation point flow of an electrically conducting micropolar fluid due to stretching of a variable thicked surface in the attendance of viscous dissipation. The flow is incompressible and laminar. The combined heat and mass transfer features are investigated. Convective and diffusion conditions are considered. The nonlinear thermal radiation, thermo-diffusion, and diffusion thermal effects are considered. The governing partial differential equations are converted to ordinary differential equations by using the appropriate similarity transformations. The obtained nonlinear and coupled ordinary differential equations are elucidated numerically using the fourth-order Runge–Kutta based shooting technique. The influence of various nondimensional parameters on the flow field like velocity, microrotation, temperature, and concentration is examined with the assistance of graphs. Results indicate that the Dufour number has a proclivity to increase the distributions of concentration and temperature correspondingly. Also, fluid temperature and concentration enhance for increasing values of the wall thickness parameter.     

Rotation,electromagnetic field,and variable thermal conductivity effects on free convection flow past an eternity vertical porous plate

The present research may facilitate the reduction of the number of conversion steps required to include the low output voltages in an electrokinetic biomass process. Variable thermal conductivity and electroosmosis flow have already established great potential in the thermo-elastic models of various manufacturing industries and have been widely used in energy technologies. As a result, the current framework investigates the characteristics of natural convection flow with the influence of variable thermal conductivity and electroosmosis over an eternity vertical porous plate. Coriolis forces and Hall current effects are considered in the momentum equations, and also thermal radiation and variable thermal conductivity are taken as energy equations. A linear chemical reaction parameter is used in the concentration equation. The equation of Poisson–Boltzmann is exploited to depict the electric potential characteristics within the accelerated plate medium. The pdepe command in Matlab software is used to figure out the numerical solutions to equations about momentum, energy, and concentration. The expressions of fluid transverse velocity, fluid axial velocity, fluid temperature, and concentration profiles are presented as numerical results and also derived vital relevant stream parameters diagrammatically, whereas the numerical values of primary skin friction, secondary skin friction, and Nusselt number are presented in tabular form for various values of pertinent flow parameters. The temperature rises as the strength of the thermal conductivity variable parameter increases. Also, as the values of the Taylor number and the thermal conductivity variable parameter go up, the primary velocity goes down. Similarly, secondary velocity increases in the opposite direction as the Taylor number and thermal conductivity variable parameter increase.     

Thermophoretic hydromagnetic dissipative heat and mass transfer with lateral mass flux,heat source,Ohmic heating and thermal conductivity effects: Network simulation numerical study

A two-dimensional mathematical model is presented for the laminar heat and mass transfer of an electrically-conducting, heat generating/absorbing fluid past a perforated horizontal surface in the presence of viscous and Joule (Ohmic) heating. The Talbot–Cheng–Scheffer–Willis formulation (1980) is used to introduce a thermophoretic coefficient into the concentration boundary layer equation. The governing partial differential equations are non-dimensionalized and transformed into a system of nonlinear ordinary differential similarity equations, in a single independent variable, η. The resulting coupled, nonlinear equations are solved under appropriate transformed boundary conditions using the Network Simulation Method. Computations are performed for a wide range of the governing flow parameters, viz Prandtl number, thermophoretic coefficient (a function of Knudsen number), Eckert number (viscous heating effect), thermal conductivity parameter, heat absorption/generation parameter, wall transpiration parameter, Hartmann number and Schmidt number. The numerical details are discussed with relevant applications. Excellent correlation is achieved with earlier studies due to White (1974) and Chamkha and Issa (2000). The present problem finds applications in optical fiber fabrication, aerosol filter precipitators, particle deposition on hydronautical blades, semiconductor wafer design, thermo-electronics and nuclear hazards.     

Analysis of couple stress nanofluid flow under convective condition in the temperature-dependent fluid properties and Lorentz forces

In recent years, a great deal of interest has been generated in modern micro- and nanotechnologies for micro/nano-electronic devices. These technologies are increasingly utilizing sophisticated fluid media to enhance performance. Among the new trends is the simultaneous adoption of nanofluids and biological micro-organisms. Motivated by bio-nanofluid vertical channel oxygenators in medical engineering, in the current work, a mathematical model is developed to examine the flow of mixed convective couple-stress nanofluids in a vertical channel with a transverse magnetic field, fluid viscosity that changes with temperature, and thermal conductivity. The non-Newtonian model follows Brownian motion and heat spread by nanoparticles in a fluid under coupled stress. Highly linked, nonlinear regulating equations are translated into nondimensional equations using relevant variables. The governing equations are then turned into a form with no dimensions. The Keller-box technique, a second-order finite difference method for solving second-order equations, is used to solve them numerically. On the other hand, the effects of different non-Newtonian flow parameters, such as the couple stress fluid parameter, the magnetic parameter, the variable fluid viscosity, the variable thermal conductivity parameters, the Brinkman number, the nanofluid and buoyancy parameters, and the rate of chemical reaction parameter, are carefully studied. The velocity, temperature, and concentration fields are calculated over a wide range of possible values for the relevant parameters.     

Viscous dissipation effect on mixed convective heat transfer of MHD flow of Williamson nanofluid over a stretching cylinder in the presence of variable thermal conductivity and chemical reaction

The effect of viscous dissipation and thermal radiation on mixed convective heat transfer of an MHD Williamson nanofluid past a stretching cylinder in the existence of chemical reaction is analyzed in this study. When energy equation is formulated, the variable thermal conductivity is deliberated. By proposing applicable similarity transformations, nonlinear ordinary differential equations (ODEs) are attained from partial differential equations. These nondimensional ODEs are computed through Runge-Kutta method integrated with shooting method using MATLAB software. The results found numerically are in agreement with that of the published works of similar nature in a limiting case. The results of the local Nusselt number, skin friction coefficient, and Sherwood numbers are organized in tables. The influence of protuberant parameters on temperature, velocity, and concentration is presented by graphs. From the results, it is seen that for higher values of variable thermal conductivity parameter, the local Sherwood number and skin friction coefficient upsurge, whereas the local Nusselt number diminishes.     

Steady magnetohydrodynamic Poiseuille flow of two immiscible non-Newtonian and Newtonian fluids in a horizontal channel with Ohmic heating

In this paper, an analytical study has been carried out on a steady magnetohydrodynamics (MHD) Poiseuille flow of two immiscible fluids in a horizontal channel with ohmic heating in the presence of an applied magnetic field. The channel is divided into two sections, Region I and Region II, respectively. Region I contains an electrically conducting, third grade, non-Newtonian fluid while Region II is a Newtonian fluid. The regular Perturbation series method is used to transform the coupled nonlinear differential equations governing the flow into a system of linear ordinary differential equations in both fluid regions. Suitable interface matching conditions were chosen to obtain separate solutions for each fluid in both regions and the results were displayed graphically for various values of physical parameters, such as pressure gradient, suction parameter, Hartmann number, Prandtl number, viscosity, and conductivity ratios to show their effects on the flow. The effect of skin friction and Nusselt number was shown with the aid of tables. The results obtained among other findings clearly shows that as the value of the magnetic parameter increases, the velocity and temperature of the fluid decrease.