最小低阶Lee矩混杂准则及其应用

众所周知,有多种准则可以用于比较和评价部分因析设计的优劣,在这些准则中,最小低阶矩混杂准则既简单明了,又计算量较小.但是,该准则中的各阶矩是基于任意两次试验之间的Hamming距离来定义的,由此导致了该准则具有一定的局限性.本文用Lee距离代替Hamming距离来定义新的矩,在此基础上提出了最小低阶Lee矩混杂准则,并用它来比较高水平部分因析设计的优劣.同时,本文通过建立最小低阶Lee矩混杂准则与其他设计筛选准则之间的解析关系,来验证这一新准则的统计合理性.     

可压缩液晶系统强解的破裂准则

研究可压缩液晶方程组强解的破裂准则,建立了一种仅依据于速度梯度的破裂准则,此种准则类似于理想可压缩流情形的Beale-Kato-Majda准则和由Huang和Xin得到的可压缩Navier-Stokes方程组情形的准则.证明用到能量不等式和高阶能量不等式.主要困难是初始密度含有真空.     

预测复合材料开裂方向的比应变能密度准则

本文提出预测复合材料中裂纹方向的比应变能密度准则,并将Tsai-Hill与Norris准则扩展来预测复合材料中的开裂方向.用这三个准则预测了具有各种不同纤维方向的单向纤维复合材料的裂纹扩展方向,预测结果与现有的比正应力准则和应变能密度准则进行了对比.     

信息复杂性准则的深入探讨

介绍联系拟合优度与模型复杂性测度的一种模型选择准则一信息复杂性(ICOMP)准则的基本原理.由Bozdogan提出的信息复杂性(ICOMP)准则可以视为两个Kullback-Leibler距离之和的一种近似.首先研究了所考虑模型中有真实模型的情况下,ICOMP准则类的渐近相容性;然后又介绍并完成了所考虑模型中没有真实模型的情况下,ICOMP准则类的渐近相容性.在有限样本容量的情况下,用ICOMP准则选择的估计模型,比用其他通用的准则选择的估计模型,更接近于真实模型.     

Orlicz空间的近端点和近严格凸性

本文给出了Orlicz函数空间中近端点的判别准则,近而推出了Orlicz函数空目近严格凸性的判别准则.另外,本文还直接给出Orlicz序列空间近严格凸的判别准则.     

面板数据分位回归中适应性LASSO调节参数的选择

在带有罚函数的变量选择中,调节参数的选择是一个关键性问题,但遗憾的是,在大多数文献中,调节参数选择的方法较为模糊,多凭经验,缺乏系统的理论方法.本文基于含随机效应的面板数据模型,提出分位回归中适应性LASSO调节参数的选择标准惩罚交叉验证准则(PCV),并讨论比较了该准则与其他选择调节参数的准则的效果.通过对不同分位点进行模拟,我们发现当残差E来自尖峰分布和厚尾分布时,该准则能更好地估计模型参数,尤其对于高分位点和低分位点而言.选取其他分位点时,PCV的效果虽稍逊色于Schwarz信息准则,但明显优于A1kaike 信息准则和交叉验证准则.且在选择变量的准确性方面,该准则比Schwarz信息准则、Akaike信息准则等更加有效.文章最后对我国各地区多个宏观经济指标的面板数据进行建模分析,展示了惩罚交叉验证准则的性能,得到了在不同分位点处宏观经济指标之间的回归关系.     

Gauss因果模型中因果效应识别方法的比较

一个Gauss因果模型中常常存在不只一种识别因果效应的方法, 不同的方法对应的估计可能不同. 该文对Pearl等人提出的前门准则, 后门准则,工具变量准则等识别方法的估计精度进行了分析比较, 并给出了相应的模拟结果, 为实践中选择更优的识别准则提供了依据.     

Panel模型中常见估计的比较

本文研究了Panel模型中回归系数常见估计的比较问题,给出了在Pitman准则,协方差阵准则和广义均方误差准则下最小二乘估计,Within估计,Between估计及两步估计之间的优良性比较结果.特别地,本文证明了在Pitman准则下最小二乘估计一致地优于Between估计.     

一类随机时滞递归神经网络的指数稳定性(英文)

本文研究了一类随机时滞递归神经网络的指数稳定性问题.利用非负鞅收敛定理和Lyapunov泛函的方法,获得了这类神经网络矩指数稳定性的新的代数准则,所给代数准则简单易用.一个具体实例用来说明稳定性判别准则的应用.     

适应性最小相对误差估计

针对乘积回归模型提出一种适应性最小相对误差(ALRE)准则,准则是一种自适应的估计方法.对于不同数据,通过调整权重可提高模型的解释能力和参数估计的准确性.证明了ALRE准则下估计量的相合性和渐近正态性.实证研究和人体脂肪数据的应用分析进一步说明了ALRE准则的有效性和实用性.     

滑开型断裂的复合型脆断判据

众所周知,现有的复合型脆断判据都是张开型断裂判据.我们认为亦存在着滑开型断裂的复合型脆断,从而提出三个滑开型断裂的复合型脆断判据:径向剪应力判据、最大剪应力判据及歪形应变能密度判据.这样,我们就能全面解释带裂纹的构件的脆断现象.     

Cylindrical cavity with a circumferential edge crack subjected to a uniform shearing stress

This paper contains an analysis of the stress distribution in an elastic medium having cylindrical cavity with a circumferential edge crack when it is deformed by the application of uniform shearing stress. By making a suitable representation of the stress function for the problem, the problem is reduced to the solution of a pair of singular integral equations. This pair of singular integral equations is solved numerically, and the stress intensity factor due to the effect of the crack size is calculated. Also the crack opening displacements are displayed in graphical forms.     

Cylindrical cavity with a circumferential edge crack subjected to a uniform shearing stress

This paper contains an analysis of the stress distribution in an elastic medium having cylindrical cavity with a circumferential edge crack when it is deformed by the application of uniform shearing stress. By making a suitable representation of the stress function for the problem, the problem is reduced to the solution of a pair of singular integral equations. This pair of singular integral equations is solved numerically, and the stress intensity factor due to the effect of the crack size is calculated. Also the crack opening displacements are displayed in graphical forms.Received: January 24, 2002; revised: October 17, 2002     

半无穷大裂纹端部粘聚力分析

准脆性材料裂纹端部断裂过程区粘聚力是导致非线性断裂特性的重要原因,根据准脆性材料的断裂特性,对存在粘聚力分布的半无穷大裂纹力学分析模型,由变形叠加原理得到以该粘聚应力分布为未知函数的积分方程,通过对积分方程的分析推证,得到了该分布函数解的数学结构和级数型表达式;提出了由实际裂纹张开位移,确定裂纹端部粘聚力分布函数的两种方法:其一由连续的裂纹张开位移通过积分变换求解未知函数级数展开项的系数,其二是由离散的裂纹张开位移数据通过最小二乘法确定该函数;推导出了相应方法求解未知量的代数方程,并且给出了适当的算例和讨论。     

碳纤维增强复合材料板中Ⅰ型裂纹扩展方向预测理论研究

对含裂纹碳纤维增强的复合材料层合板进行了裂纹扩展方向预测理论的研究．介绍了一种新的复合材料Z断裂理论,在裂纹尖端Z因子的定义中引入了新概念:面内平均应变,面内膨胀应变能密度因子和交互特征函数．并通过理论分析和实验测试证明了Z断裂理论的正确性．     

Transient response of two collinear dielectric cracks in a piezoelectric solid under inplane impacts

The paper is focused on the dynamic analysis of two collinear dielectric cracks in a piezoelectric material under the action of in-plane electromechanical impacts. Considering the dielectric permeability of crack interior, the electric displacements at the crack surfaces are governed by the jumps of electric potential and crack opening displacement across the cracks. The permeable and impermeable crack models are the limiting cases of the general one. The Laplace and Fourier transform techniques are further utilized to solve the mixed initial-boundary-value problem, and then to obtain the singular integral equations with Cauchy kernel, which are solved numerically. Dynamic intensity factors of stress, electric displacement and crack opening displacement are determined in time domain by means of a numerical inversion of the Laplace transform. Numerical results for PZT-5H are calculated to show the effects of the dielectric permeability inside the cracks, applied electric loadings and the geometry of the cracks on the fracture parameters in graphics. The observations reveal that based on the COD intensity factor, a positive electric field enhances the dynamic dielectric crack growth and a negative one impedes the dynamic dielectric crack growth in a piezoelectric solid.     

Static and extending interface cracks with contact zones in anisotropic as well as in piezoelectric bimaterials

An interface crack with an electrically permeable and mechanically frictionless contact zone in a piezoelectric bimaterial under the action of a remote mixed mode mechanical loading as well as thermal and electrical fields is considered in the first part of this paper. By use of the matrix‐vector representations of thermal, mechanical and electrical fields via sectionally‐holomorphic functions the problems of linear relationships are formulated and solved exactly both for an electrically permeable and an electrically impermeable interface crack. For these cases the transcendental equations and clear analytical formulas are derived for the determination of the contact zone lengths and the associated fracture mechanical parameters. A plane strain problem for a crack with a frictionless contact zone at the leading crack tip extending stationary along an interface of two semi‐infinite anisotropic spaces with a subsonic speed under the action of various loading is considered in the second part of this paper. By introducing of a moving coordinate system connected with the crack tip and by using the formal similarity of static and propagating crack problems the combined Dirichlet‐Riemann boundary value problem is formulated and solved exactly for this case as well and a transcendental equation is obtained for the determination of the real contact zone length. It is found that the increase of the crack speed leads to an increase of the real contact zone length and the correspondent stress intensity factors which increase significantly for a quasi‐Rayleigh wave speed.     

Mathematical modelling and the study of the influence of initial stresses on the SIF and ERR at the crack tips in a plate-strip of orthotropic material

A plate-strip fabricated from the orthotropic material and containing a crack whose edges are parallel to the face planes of the plate is considered. It is assumed that the strip is stretched (or compressed) initially along the crack edges by uniformly distributed external normal forces acting on the simply supported ends of the plate-strip. After this initial stretching (or compression) the crack edges are loaded by additional uniformly distributed normal (opening) forces. As a result of the action of these additional forces the stress concentration characterized by the stress intensity factor (SIF) of mode I or by the energy release rate (ERR) of mixed mode arises at the crack tips. In this paper, the influence of the initial stresses on the SIF or ERR is modelled mathematically by the use of the three-dimensional linearized theory of elasticity. The aim of the present investigations is to study the effect of the mechanical–orthotropic properties of the plate-strip material on this influence by the use of the finite element method (FEM) modelling of the corresponding boundary-value problem.     

Crack growth modeling via 3D automatic adaptive mesh refinement based on modified-SPR technique

In this paper, the three-dimensional automatic adaptive mesh refinement is presented in modeling the crack propagation based on the modified superconvergent patch recovery technique. The technique is developed for the mixed mode fracture analysis of different fracture specimens. The stress intensity factors are calculated at the crack tip region and the crack propagation is determined by applying a proper crack growth criterion. An automatic adaptive mesh refinement is employed on the basis of modified superconvergent patch recovery (MSPR) technique to simulate the crack growth by applying the asymptotic crack tip solution and using the collapsed quarter-point singular tetrahedral elements at the crack tip region. A-posteriori error estimator is used based on the Zienkiewicz–Zhu method to estimate the error of fracture parameters and predict the crack path pattern. Finally, the efficiency and accuracy of proposed computational algorithm is demonstrated by several numerical examples.     

Toughening effect of ferroelectric ceramics induced by domain switching and dislocations

The multi-scale analysis of fracture toughness of ferroelectric ceramics under complicate mechanical–electrical coupling effect is carried out in this paper. The generalized stress intensity factor (SIF) arising from spontaneous strains and polarization transformation in switching domain zones is accurately obtained by using an extended Eshelby theory. Taking BaTiO₃ ferroelectric ceramic for example, it is discovered that the crack propagation can be induced by domain switching arising from negative electrical field when the crack surface is parallel to the isotropic plane, and the obtained critical electric displacement intensity factor (EDIF) approximates closely to that obtained by the Green’s function method. Additionally, as pinning dislocations and slip dislocations can strongly influence properties of ferroelectric devices and induce the property degradation, it is necessary to investigate the dislocation toughening effects on fatigue and fracture mechanisms. The results show that the dislocation shielding and anti-shielding effects on mode II SIF, mode I SIF and EDIF are obviously different when a dislocation locates at a position near the crack tip. Through the calculation of the critical applied EDIF for crack propagation by using mechanical energy release rate (MERR) theory, it is discovered that the slip angles obviously influence fracture toughness, and the mode II SIF arising from dislocation has little influence on fracture toughness, however, the mode I SIF and EDIF arising from dislocation have great influences on fracture toughness.