新型类沸石金属-有机骨架材料用于天然气中CO2的分离

研究了在usf型类沸石金属-有机骨架材料(usf-ZMOF)中不同金属离子(Li⁺, Na⁺, K⁺, Rb⁺, Cs⁺, Mg²⁺, Ca²⁺, Sr²⁺, Al³⁺)对天然气分离(以CO₂/CH₄, CO₂/H₂, CO₂/N₂为研究对象)的不同影响. 结果表明, 此类材料对于3种体系的分离选择性均高于现有材料. 其中性能最好的是Al-usf-ZMOF, 其对CO₂/CH₄, CO₂/N₂和CO₂/H₂的分离选择性分别为290, 1700和16800. 同时, 对于经不同的离子交换后的usf-ZMOF, 吸附选择性随着离子电荷值的增加而增大; 对于同一主族的离子, 选择性随着原子序数的增加而减小. 而上述现象的产生是由阳离子和CO₂间的强静电作用所致.     

多孔材料表面修饰聚酰亚胺非对称混合基质膜对CO2/N2和CO2/CH4的气体分离

兼具高通量和高选择性的气体分离膜是研究膜分离材料的目标.采用相转化法制备了聚酰亚胺非对称膜,并将其作为基底膜材料,分别在其表面修饰掺有金属有机框架材料Cu₃(BTC)₂ (1, 3, 5-均苯三甲酸合铜),沸石咪唑酯骨架材料ZIF-8以及镁铝水滑石MgAl-LDHs的聚酰胺酸溶液,经热亚胺化后制成非对称混合基质膜.研究了该系列非对称混合基质膜的结构特性和对CO₂、CH₄和N₂气体分离性能;考察了ZIF-8的掺杂量对非对称混合基质膜透气性能的影响.结果表明非对称聚酰亚胺膜的表面修饰可有效地改变膜的表面性质,掺杂ZIF-8的非对称混合基质膜气体的透气性能和选择性都增加,且掺杂量为5% (w)时CO₂/N₂和CO₂/CH₄的理想选择性分别高达24和83,为合成高效的CO₂分离膜提供了借鉴.     

基于咔唑羧酸配体构筑铁基金属有机框架及其对CO2/CH4混合气体的分离性质

通过咔唑羧酸配体(H₃L)与三核铁簇[Fe₃(μ₃-O)(CH₃COO)₆]在水热条件下反应, 合成了具有三维骨架结构的铁基金属有机框架(1). 气体吸附实验结果表明, 化合物1具有高的比表面积且对CO₂的吸附量大于对CH₄的吸附量. 理想溶液吸附理论(IAST)计算结果表明, 化合物1在100 kPa及温度分别为273和298 K下对CO₂/CH₄(体积比为0.5∶0.5)混合气体的分离比分别为3.52和3.15, 预示其可以作为一种CO₂/CH₄分离型材料.     

金属有机框架材料的制备及在吸附分离CO2中的应用

金属有机框架（MOFs）材料是当今的研究热点之一,是一类颇有潜力成为适用于CO₂吸附和分离的重要材料。本文从MOFs的发展及其所具有的特点、MOFs用于CO₂的吸附与分离所取得的突破性进展以及MOFs的传统合成及绿色制备方法三个方面展开论述。主要论述了MOFs适用于CO₂吸附的原理,及其相对于传统的CO₂吸附材料所具有的特点和优势,亦阐述了MOFs修饰与调变的方法。列出了MOFs用于单组分CO₂吸附及CO₂/CH₄、CO₂/N₂吸附分离的结果。同时,针对传统MOFs制备方法不适宜大规模CO₂捕集材料的生产,特别论述了机械化学合成法和新兴的潮湿矿物风化法,其均具有绿色化、无溶剂、低能耗和简单等特点,是一类较有研究价值和应用潜力的技术。随着温室效应和不可再生石化燃料的消耗等环境和能源问题的日趋严峻,研究及开发适用于CO₂捕集与封存技术的MOFs新材料迫在眉睫,且任重而道远。     

富氮多级孔炭材料的制备及其吸附分离CO2的性能

使用新型含氮聚合物席夫碱为炭源, SBA-15为模板,通过纳米铸型法原位合成微孔-中孔-大孔串联的多级孔富氮炭材料.材料的比表面积为752 m²·g^-1,孔容0.79 cm³·g^-1; X光电子能谱分析表明炭材料中的氮含量高达7.85%(w).将所制备的多孔炭材料应用于CO₂的吸附分离,发现炭材料的微孔发挥主导作用,表面氮掺杂发挥辅助作用.在两者的协同作用下, CO₂吸附量在常压、273 K下可达97 cm³·g^-1, CO₂/N₂和CO₂/CH₄的分离比(摩尔比)分别为7.0和3.2,低压亨利吸附选择性分别为23.3和4.2.采用Toth模型对单组分平衡吸附进行拟合,并根据理想溶液吸附理论(IAST)预测双组分CO₂/N₂和CO₂/CH₄混合气体的分离选择性分别为40和18.     

石墨烯/纳米管复合结构吸附分离CO2/CH4混合物的分子模拟

采用巨正则蒙特卡洛(GCMC)及分子动力学(MD)方法探讨了石墨烯/碳纳米管三维骨架结构(GNHS)对等摩尔CO₂/CH₄二元混合物的吸附分离性能. 模拟结果表明CO₂比CH₄更易吸附于GNHS中, GNHS与(6, 6)SWCNT (单壁碳纳米管)相比具有更高的分离性能. 随着温度升高, CO₂的吸附量快速降低, 而CH₄的吸附量则呈现出先升高后降低的趋势. 最后采用分子动力学方法计算了CO₂与CH₄的自扩散系数及停留时间等动力学相关参数, 发现CO₂在GNHS内扩散的阻力更大. 而各组分在吸附剂外部吸附层内的扩散过程对混合物的分离也存在一定影响.     

理论空燃比天然气汽车尾气中H2O和O2对CH4与NO反应的影响

共沉淀法制备CeZrYLa+LaAl 复合氧化物载体, 等体积浸渍法制备了Pt 催化剂, 用于研究理论空燃比天然气汽车(NGVs)尾气净化反应中CH₄与NO的反应规律. 并考察了10% (体积分数, φ)H₂O和计量比O₂对CO₂存在时的CH₄+NO反应的影响. 结果表明: 对于不同条件下的NO+CH₄反应, 主要生成N₂和CO₂, 高温区有CO生成. 低温区无O₂时可以生成N₂O, 有O₂时可以生成NO₂; 添加10% (φ)的H₂O后, CH₄ 转化活性降低, NO转化活性基本不变, 这是由于H₂O减弱了CH₄与CO₂的重整反应, 但是对CH₄与NO的反应基本没有影响; 添加计量比的O₂后, CH₄转化活性提高, 而NO转化活性降低, 这是由于O₂和NO之间存在竞争吸附, CH₄被O₂氧化为主要反应, 从而减弱了NO的转化; 同时添加计量比的O₂和10% (φ) H₂O, CH₄与CO₂的重整反应受到抑制,CH₄与NO的反应、甲烷蒸汽重整反应和甲烷被O₂氧化反应同时发生, CH₄和NO的转化活性均提高.     

晶种法合成UZM-9分子筛及其CO2/CH4/N2吸附分离性能

以TEAOH和TMAOH为有机模板剂,酸处理的UZM-9分子筛为晶种,采用水热法在48 h内合成出分子筛UZM-9,并对其CO₂/CH₄/N₂的吸附分离性能进行了研究。采用XRD、ICP、TG、SEM与气体吸附等手段对晶种法合成的UZM-9分子筛结构、耐水稳定性与吸附性能进行了研究。结果表明,晶种法可以在2 d内合成出硅铝原子比在3以上、收率达到65%的UZM-9分子筛;所得分子筛的CO₂吸附容量可以达到5 mmol/g以上,吸附热为34 kJ/mol,CO₂/CH₄、CO₂/N₂与CH₄/N₂的平均分离因子分别为100、240与2.4,CO₂分离性能优良且具有一定耐水性能。     

高通量筛选金属-有机框架:分离天然气中的硫化氢和二氧化碳

采用分子模拟高通量筛选的方法研究了6013种实验已经合成的金属-有机框架（MOFs）对天然气五元混合物（CH₄,C₂H₆,C₃H₈,H₂S和CO₂）中H₂S和CO₂的吸附分离性能.为了综合吸附量和选择性这两项指标,我们首先比较了三种权衡方法[权衡α法（Tradeoff between S_{H2S+CO2/C1-C3} and N_H2S+CO2,TSN）,标准值法（Standard normal method,SNM）和权衡β法（Tradeoff between selectivity and capacity,TSC）].接着,针对四种MOF描述符[最大孔径（LCD）,孔隙率（φ）,比表面积（VSA）和吸附热（Q_st⁰）],通过Pearson相关系数分析了每种描述符分别对三种权衡变量的相关性,结果显示TSC法与四种MOF描述符的相关性最佳.然后,使用多元线性回归方法定量地分析了四种MOF描述符分别对TSC的影响程度;而决策树模型则被用于规划性能高效MOFs的设计路径.最后,20种性能最优MOFs从数据库中脱颖而出,它们将为净化天然气技术的发展提供坚实的理论指导.     

定向合成高效捕获CO2的新型多孔芳香材料

通过简单的离子热法,以四（4-氰基联苯基）硅烷作为四面体基块,将其与无水氯化锌在充满氩气气氛的手套箱中充分研磨后密封,分别以400和550 ℃的反应温度合成了新型多孔芳香骨架材料（PAF-51）,得到PAF-51-1（400 ℃条件下）与PAF-51-2（550 ℃条件下）的比表面积分别为720和557 m²·g^-1 （BET）.与CH₄和N₂对比,该材料对CO₂具有极好的选择性吸附能力. 273 K条件下,CO₂/N₂分离指数最高可达52.2,CO₂/CH₄分离指数也达到10.3,这一性质极有可能使得PAF-51成为捕获CO₂理想材料,并对再生能源具有潜在的应用.     

气体分离膜研究进展

全面综述了近几年气体分离膜研究的最新进展,主要包括气体分离膜材料、制膜方法、表征方法三个方面。     

Lipophilic ternary complexes in liquid–liquid extraction of trivalent lanthanides

The formation of ternary complexes between lanthanide ions [Nd(III) or Eu(III)], octyl(phenyl)-N,N-diisobutyl-carbamoylmethylphosphine oxide (CMPO), and bis-(2-ethylhexyl)phosphoric acid (HDEHP) was probed by liquid–liquid extraction and spectroscopic techniques. Equilibrium modeling of data for the extraction of Nd(III) or Eu(III) from lactic acid media into n-dodecane solutions of CMPO and HDEHP indicates the predominant extracted species are of the type [Ln(AHA)₂(A)] and [Ln(CMPO)(AHA)₂(A)], where Ln?=?Nd or Eu and A represents the DEHP^? anion. FTIR (for both Eu and Nd) and visible spectrophotometry (in the case of Nd) indicate the formation of the [Ln(CMPO)(A)₃] complexes when CMPO is added to n-dodecane solutions of the LnA₃ compounds. Both techniques indicate a stronger propensity of CMPO to complex Nd(III) versus Eu(III).     

毛细管电泳法在手性分离中的应用及进展

近年来,毛细管电泳(CE) 手性分离方法的研究主要集中在各种手性添加剂与对映体药物的匹配及实验条件的最优化选择上.目前,较为成熟的CE分离模式有:区带电泳(CZE)、凝胶电泳(CGE)、等速电泳(CITP)、胶束电动色谱(MEKC)和非水电泳(NACE)等,并已成功地用于手性化合物对映体的分离.CE手性分离研究正朝着新型手性选择剂的研制和实现与其他各种定性分析仪器及其他色谱分离模式的联用方向发展.     

Fabrication of Matrimid/polyethersulfone dual-layer hollow fiber membranes for gas separation

We have developed almost defect-free Matrimid/polyethersulfone (PES) dual-layer hollow fibers with an ultra-thin outer layer of about 10 × 10⁻⁶ m (10 μm), studied the effects of spinneret and coagulant temperatures and dope flow rates on membrane morphology and separation performance, and highlighted the process similarities and differences between single-layer and dual-layer hollow fiber fabrications. The compositions of the outer and inner layer dopes were 26.2/58.8/15.0 (in wt.%) Matrimid/NMP/methanol and 36/51.2/12.8 (in wt.%) PES/NMP/ethanol, respectively. It is found that 25 °C for both spinneret and coagulant is a better condition, and the fibers thus spun exhibit an O₂/N₂ selectivity of 6.26 which is within the 87% of the intrinsic value and a calculated apparent dense-layer thickness of about 2886 × 10⁻¹⁰ m (2886 Å). These dual-layer membranes also have impressive CO₂/CH₄ selectivity of around 40 in mixed gas tests. The scanning electron microscopy (SEM) studies show that low coagulant temperatures produce dual-layer hollow fibers with an overall thicker thickness and tighter interfacial structure which may result in a higher substructure resistance and decrease the permeance and selectivity simultaneously. The elemental analysis of the interface skins confirms that a faster inter-layer diffusion occurs when the fibers are spun at higher spinneret temperatures. Experimental results also reveal that the separation performance of dual-layer hollow fiber membranes is extremely sensitive to the outer layer dope flow rate, and the inner layer dope flow rate also has some influence. SEM pictures indicate that the macrovoid formation in dual-layer asymmetric hollow fiber membranes is quite similar to that in single-layer ones. It appears that macrovoids observed in this study likely start from local stress imbalance and weak points.     

Applications of magnetic materials separation in biological nanomedicine

As a result of their advantages for superparamagnetic properties, good biocompatibility, and high binding capacity, functionalized magnetic materials became widely popular over the past couple of decades, being applied on large scale in various processes of sample preparation for biomedicine. In this work, we perform an in‐depth review on the current progress in the field of magnetic bead separation, discussing in detail the physical basis of this process, various synthesis methods and surface modification strategies. We place special focus of attention as well on the latest applications of magnetic polymer microspheres in cell separation, protein purification, immobilized enzyme, nucleic acid separation, and extraction of bioactive compounds with low molecular weight. Existing problems are highlighted and possible trends of magnetic separation techniques for biomedicine in the future are proposed.     

Sulfonated polysulfone-preparative routes and applications in membranes used for pressure driven techniques

There is much enthusiasm now-a-days for efforts to improve membrane performances. Membrane modification is one of the critical approaches needed for the development of membrane science and technology. The beauty of research in this orientation is that it is a dynamic process that moves forward slowly and recommendations are made based on the science available. In this regard sulfonation of polysulfones is an excellent move. The present review demonstrates different sulfonation strategies of polysulfones as well as promoting applications in pressure driven separation sciences (viz. salt, macromolecule, organic separation from water). It shows that marked path is promising one.     

混合萃取剂拆分氧氟沙星外消旋体

将混合萃取剂技术应用于氧氟沙星外消旋体的萃取分离,主要研究了氧氟沙星对映体在水和有机溶剂两相中的萃取分配行为。研究结果表明:在L-(-)-对甲基二苯甲酰酒石酸(L-DTTA)的浓度为0.18mol/L,L-(-)-二苯甲酰酒石酸(L-DBTA)的浓度为0.12mol/L,氧氟沙星浓度为0.2mg/mL,萃取温度为25℃,pH为7.00时,L型对映体和D型对映体的分配系数分别达到10.2和4.20,手性选择性达到2.43。     

Modelling of multifrequency IRMPD for laser isotope separation

The process of infrared multiple photon dissociation (IRMPD) of molecules is of great fundamental importance and has practical significance, such as isotope separation etc. Unfortunately, a clear insight into the process has been hindered by the bewildering array of important variables affecting MPD. The dissociation probability γ (φ) i.e. the yield has been found to be a sensitive function of laser fluence φ along with numerous other parameters like laser frequency, gas pressure etc. We have shown that in single frequency IRMPD, an accurate quantitative characterization of the dissociation probability can be adequately expressed by a ‘power law’ model with two fitting parameters namely critical fluence, φ_c and multiphoton order,m. This model was exploited in analysing our MPD results on various systems. However, the small isotope shift encountered in heavy elements and the sticking phenomenon observed in small light molecules restrict respectively the separation factor and the dissociation yield. These problems can effectively be tackled by irradiation with multifrequency laser beams which can be chosen appropriately on the basis of spectroscopic features. Based on our success in single frequency model, multifrequency IRMPD is modelled by a functional form containing the product of power law terms for individual fluences on irradiation frequencies. This model is successfully benchmarked with our experimental results on multifrequency LIS of tritium. Such knowledge can be utilized for appropriate separation process design, evaluation and optimization.     

Sheath-assisted versus sheathless dielectrophoretic particle separation

Lab-on-chip devices are widely being used for binary and ternary cell/particle separation applications. Among the lab-on-chip methods, dielectrophoresis (DEP) is a cost-effective and label-free method, with great capabilities for size-based separation of cells and particles, which is mostly performed in sheath-assisted forms. However, the elimination of the sheath flows offers advantages such as ease of operation and higher sample throughput. In this work, we present a comparison of sheath-assisted and sheathless DEP separation of three sizes of microparticles using tilted electrodes. The sheath-assisted design was capable of separating the 5, 10, and 15 μm particles with a separation efficiency as high as 98.0% for 15 μm particles. By adding a DEP focusing region, a sheathless DEP separator was proposed, which offered higher throughputs (up to 10 times) at the cost of lowering the separation efficiency (a reduction up to 10.3% for 15 μm) compared to the sheath-assisted design. To enhance the separation efficiency, a combination of the DEP focusing accompanied by weak sheath flows from both sides was proposed. This design achieved the highest sample separation yield in the outlets (as high as 98.7% for 15 μm) with a sample throughput of more than 4.2 μL/min. This study provides insights into the choice of an appropriate platform for any application in which the yield, purity, throughput, and portability must be considered.     

手性药物的毛细管电泳拆分

以氧氟沙星、扑尔敏、特布它林和普萘洛尔为手性药物,分别采用羟丙基-β环糊精(HP--βCD)、羟丙基-β-环糊精结合羧甲基-β-环糊精(HP--βCD/CM--βCD)作手性拆分试剂,考察环糊精浓度和pH对手性选择性的影响。结果发现环糊精提供手性相互作用,而pH强烈地影响这种相互作用。以HP--βCD/CM-β-CD组成的双环糊精系统能更好地优化手性选择性,而通过调节pH可以获得需要的分离选择性、迁移次序。