油酸修饰纳米CaCO3对PP结晶行为和力学性能的影响

Oleic acid (OA)-modified CaCO3 nanoparticles were prepared using surface modification method. Infrared spectroscopy (IR) was used to investigate the structure of the modified CaCO3 nanoparticles, and the result showed that OA attached to the surface of CaCO3 nanoparticles with the ionic bond. Effect of OA concentration on the dispersion stability of CaCO3 in heptane was also studied, and the result indicated that modified CaCO3 nanoparticles dispersed in heptane more stably than unmodified ones. The optimal proportion of OA to CaCO3 was established. The effect of modified CaCO3 nanoparticles on crystallization behavior of polypropylene (PP) was studied by means of DSC. It was found that CaCO3 significantly increased the crystallization temperature, crystal-lization degree and crystallization rate of PP, and the addition of modified CaCO3 nanoparticles can lead to the for-mation of β-crystal PP. Effect of the modified CaCO3 content on mechanical properties of PP/CaCO3 nanocompo-sites was also studied. The results showed that the modified CaCO3 can effectively improve the mechanical proper-ties of PP. In comparison with PP, the impact strength of PP/CaCO3 nanocomposites increased by about 65% and the flexural strength increased by about 20%.     

Surface‐modified MgO nanoparticle enhances the mechanical and direct‐current electrical characteristics of polypropylene/polyolefin elastomer nanodielectrics

Polypropylene (PP)/polyolefin elastomer (POE) blends and MgO/PP/POE nanocomposites were fabricated by melt blending. The morphology, mechanical, and electrical properties of the nanocomposites were investigated. Scanning electron microscopy showed that the surface‐modified MgO nanoparticles were well dispersed in the polymer matrix at low loadings of less than 3 phr. X‐ray diffraction demonstrated that the crystalline phases of PP in the composites were changed and that the β phase significantly increased. An examination of the electrical properties revealed that the direct‐current (dc) electric breakdown strength and space‐charge suppression effect were remarkably improved by the introduction of the surface‐modified MgO nanoparticles. In addition, obvious enhancements in the tensile modulus and strength were obtained as a result of the synergistic toughening of the POE and MgO nanoparticles. Thus, MgO/PP/POE nanocomposites with enhanced mechanical and electrical properties have great potential to be used as recyclable insulation materials for high‐voltage dc cables with large transmission capacities and high operating temperatures. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 132, 42863.     

Effects of nanoparticle treatment on the crystallization behavior and mechanical properties of polypropylene/calcium carbonate nanocomposites

Effects of nanoparticle surface treatment on the crystallization behavior and mechanical properties of polypropylene (PP)/CaCO₃ nanocomposites were investigated by using differential scanning calorimetry (DSC), polarized optical microscope (POM), X‐ray diffraction (XRD), transmission electron microscopy (TEM), and scanning electron microscopy (SEM). The results demonstrated that the interfacial interaction formed between PP and nanoparticles significantly influenced the thermal and mechanical properties of nanocomposites. It was found that CaCO₃ nanoparticles modified by a single aluminate coupling agent (CA‐1) could improve the onset crystallization temperature more effectively than that modified by a compound surface‐treating agent (CA‐2) could. However, there is no significant difference in total rate of crystallization for the two PP/CaCO₃ nanocomposites (PPC‐1 and PPC‐2), which contained CA‐1 and CA‐2, respectively. In contrast, CA‐2 modified nanoparticles could cause smaller spherulites and induce much more β‐phase crystal in nanocomposites than that of CA‐1 modified nanoparticles. This may be explained by a synergistic effect of aluminate coupling agent and stearic acid in CA‐2, which also resulted in an improved toughness for PPC‐2. © 2006 Wiley Periodicals, Inc. J Appl PolymSci 102: 3480–3488, 2006     

聚丙烯的高性能化研究

在小型反应器内合成了不含及含有成核剂的聚丙烯(PP)、双峰聚丙烯(BMPP)和聚丙烯共聚物(PPc)，并用纳米CaCO3改性PPc。研究结果表明：釜内成核的PP和BMPP的弯曲模量和热变形温度显著增加，结晶温度和结晶速率明显提高，BMPP的拉伸强度也较PP大幅增加；但成核剂对PPc的性能影响不大，而加入纳米CaCO3后则使PPc的力学性能和结晶温度同步显著增加。     

不同形貌CaCO3负载β成核剂对PP性能的影响

将3种不同形貌的碳酸钙（CaCO3）（立方体、纺锤形、球形）填充聚丙烯（PP）树脂,考察了未负载CaCO3和CaCO3负载庚二酸对PP结晶性能和力学性能的影响。结果表明,未负载的CaCO3主要起到增刚的作用,其中纺锤形CaCO3对PP力学性能的影响最小;负载β成核剂后的CaCO3起到增韧的作用,出现了明显的β结晶峰;立方体CaCO3对PP的刚性影响最小,纺锤体CaCO3可将冲击强度由最初的4.48 kJ/m2提高到5.57 kJ/m2;负载庚二酸后,CaCO3粒径越小其增韧效果越好。     

Effect of Nanoparticle Surface Treatment on Nonisothermal Crystallization Behavior of Polypropylene/Calcium Carbonate Nanocomposites

Polypropylene (PP)/CaCO₃ nanocomposites were prepared by melt-blending method using a Haake-90 mixer. The CaCO₃ nanoparticles were surface modified with a coupling agent before compounding. A fine dispersion of the modified nanoparticles in the nanocomposites was observed by transmission electron microscopy (TEM). Effects of surface treatment of CaCO₃ nanoparticles on the nonisothermal crystallization behavior and kinetics of PP/CaCO₃ nanocomposites were investigated by differential scanning calorimetry (DSC). Jeziorny and Mo methods were used to describe the nonisothermal crystallization process. It was shown that the crystallization temperature of the nanocomposites increased due to the heterogeneous nucleation of the surface-treated nanoparticles. It was found that the nanoparticles modified with a proper content range of coupling agent could facilitate the nonisothermal crystallization of the nanocomposites under certain conditions (the cooling rate and the relative degree of crystallinity). This may be a potential application for the crystallization controlling of composites in manufacturing. In addition, the activation energy of crystallization for the nanocomposites and the nucleation activity of the nanoparticle were estimated by using Kissinger and Dobreva's methods, respectively. It could be concluded that the surface-treated nanoparticles had a strong nucleating activity, which caused the decrease of the activation energy of the nanocomposites.     

Nanocomposites of polypropylene/titanate nanotubes: morphology,nucleation effects of nanoparticles and properties

High-quality titanate nanotubes (TiNT) were mixed with modified polypropylene (PP*) by a batch melt-mixing procedure. To improve compatibility between the nanofiller and the matrix, polypropylene (PP) was modified by electron beam irradiation. Effects of TiNT nanoparticles on crystallization, mechanical, thermal and rheological properties of the modified polypropylene were studied and compared with the analogous systems filled with commercial micro- (mTiO₂) and nano- (nTiO₂) titanium dioxide particles. Nucleation effects of the TiO₂-based fillers on PP* crystallization were investigated in detail. The microstructure of the PP*/TiNT nanocomposites shows well-dispersed TiNT sparse aggregates (clouds), penetrated by the polymer. A large-scale structure in the nanocomposite melts confirmed also rheology. In comparison to the matrix characteristics, the stiffness and microhardness of the TiNT nanocomposites increase by 27 and 33 %, respectively. The enhancement in mechanical properties demonstrates that the quality titanate nanotubes can be used as an efficient filler in non-polar polymers using the polymers modified by irradiation. In the case of the nanocomposites containing nTiO₂-anatase particles, the increase in these mechanical characteristics is lower. The investigated changes in the rate of crystallization indicate a marked nucleation effect of the nanotubes. The crystallization kinetics data, processed by the Avrami equation, suggest 3-dimensional crystal growth in the polypropylene matrix. The observed improvement in mechanical properties of the TiNT nanocomposites is induced not only by the nanofiller reinforcement but also by the changes of supermolecular structure of the polymer matrix due to nucleated crystallization.     

Effect of Organomodified Ni-Al Layered Double Hydroxide (OLDH) on the Properties of Polypropylene (PP)/LDH Nanocomposites

This work addresses the effect of organomodified layer double hydroxide (OLDH) on the properties of PP/LDH nanocomposites prepared by melt intercalation method using a single screw extruder with maleic anhydride grafted polypropylene (PP-g-MA) as a compatibilizer. For this, Ni-Al LDH was first prepared by the co-precipitation method at constant pH using their nitrate salts. The above synthesized pristine LDH was organically modified using sodium dodecyl sulphate (SDS) by the regeneration method. The structural and thermal properties of LDH and PP nanocomposites were performed by X-ray diffraction (XRD), FTIR spectroscopy, thermogravimetric analysis (TGA), and differential scanning calorimetry (DSC). The influence of LDH loading on the mechanical and thermal properties of the nanocomposite was also investigated. The XRD results confirmed the formation of exfoliated PP/LDH nanocomposites. PP/LDH nanocomposites exhibited enhanced thermal stability relative to the pure PP. When 10% weight loss was selected as a point of comparison, the decomposition temperature of PP/LDH (5 wt%) nanocomposite was 15.3°C higher than that of pure PP. The DSC result indicated an increase in crystallization and melting temperature of the PP/LDH nanocomposites compared to pure PP. Overall, the mechanical properties of the PP/LDH nanocomposites increased with an increase in the LDH content. The maximum improvement of tensile strength, Young's modulus, flexural strength, and flexural modulus for the PP/LDH nanocomposite was found to be 11, 22.5, 28, and 22%, respectively, over neat PP. For comparison purposes, a nanocomposite with 5 wt% modified bentonite (PP/B5) was also prepared under the same operating condition and there was no significant improvement in mechanical properties (tensile strength and modulus).     

Study on the Effect of Polypyrrole and Polypyrrole/Graphene Oxide Nanoparticles on the Microstructure,Electrical and Tensile Properties of Polypropylene Nanocomposites

In this article Polypropylene/Polypyrrole (PP/PPy) and Polypropylene/polypyrrole-graphene oxide (PP/PPy-GO) nanocomposites were prepared by melt mixing. PPy nanoparticles and PPy-GO nanocomposite were prepared by chemical polymerization and served as nanofillers. FTIR, XRD and SEM analysis were used for the characterization of PPy and PPy-GO composites. The effects of PPy and PPy-GO loading level on the morphology, tensile and electrical properties of PP-based nanocomposites were examined. It was found that the Young's modulus and tensile strength increased with the increase of nanofiller content. Tensile results also showed that PPy-GO composite significantly affected the mechanical properties of PP based nanocomposites compared to the PPy nanoparticles. It was observed that the addition of 1% wt. PPy-GO into PP, increased the Young's modulus about 30% compared as with pure PP. Electrical conductivity measurements showed that conductivity of PP nanocomposites increased up to 1 × 10^?3 S/cm for PP/PPy-GO nanocomposites. It was also observed that PP-g-MA improved the distribution of PPy and PPy-GO nanocomposites and affected the morphology, electrical and mechanical properties of PP-based nanocomposites.     

PP／SBS／纳米CaCO3复合材料结构与性能研究

研究了PP/SBS/纳米CaCO3复合材料的力学性能以及SBS分散相颗粒和纳米CaCO3粒子在PP基体中的分散状况。结果表明,纳米CaCO3粒子的加入使复合材料的缺口冲击强度、弯曲弹性模量、拉伸强度均得到提高。透射电镜观察发现,纳米CaCO3粒子的加入使复合体系的熔体黏度增大,对弹性体SBS的分散起到剪切细化、均化的作用,从而起到协同增韧效应。