A Dual Functional Electroactive and Fluorescent Probe for Coupled Measurements of Vesicular Exocytosis with High Spatial and Temporal Resolution

In this work, Fluorescent False Neurotransmitter 102 (FFN102), a synthesized analogue of biogenic neurotransmitters, was demonstrated to show both pH‐dependent fluorescence and electroactivity. To study secretory behaviors at the single‐vesicle level, FFN102 was employed as a new fluorescent/electroactive dual probe in a coupled technique (amperometry and total internal reflection fluorescence microscopy (TIRFM)). We used N13 cells, a stable clone of BON cells, to specifically accumulate FFN102 into their secretory vesicles, and then optical and electrochemical measurements of vesicular exocytosis were experimentally achieved by using indium tin oxide (ITO) transparent electrodes. Upon stimulation, FFN102 started to diffuse out from the acidic intravesicular microenvironment to the neutral extracellular space, leading to fluorescent emissions and to the electrochemical oxidation signals that were simultaneously collected from the ITO electrode surface. The correlation of fluorescence and amperometric signals resulting from the FFN102 probe allows real‐time monitoring of single exocytotic events with both high spatial and temporal resolution. This work opens new possibilities in the investigation of exocytotic mechanisms.     

Nanosecond electric pulse-induced calcium entry into chromaffin cells

Electrically excitable bovine adrenal chromaffin cells were exposed to nanosecond duration electric pulses at field intensities ranging from 2 MV/m to 8 MV/m and intracellular calcium levels ([Ca(2+)](i)) monitored in real time by fluorescence imaging of cells loaded with Calcium Green. A single 4 ns, 8 MV/m pulse produced a rapid, short-lived increase in [Ca(2+)](i), with the magnitude of the calcium response depending on the intensity of the electric field. Multiple pulses failed to produce a greater calcium response than a single pulse, and a short refractory period was required between pulses before another maximal increase in [Ca(2+)](i) could be triggered. The pulse-induced rise in [Ca(2+)](i) was not affected by depleting intracellular calcium stores with caffeine or thapsigargin but was completely prevented by the presence of EGTA, Co(2+), or the L-type calcium channel blocker nitrendipine in the extracellular medium. Thus, a single nanosecond pulse is sufficient to elicit a rise in [Ca(2+)](i) that involves entry of calcium via L-type calcium channels.     

Voltammetric study of the ion-exchange binding of non-electroactive metal cations to DNA-modified surfaces

We describe a simple electrochemical protocol for studying the ion-exchange binding of non-electroactive ions, specifically mono- and divalent metal cations of biological relevance (Mg(2+), Ca(2+), and K(+)), to DNA-modified surfaces. After incubation in a dilute solution of multiply charged transition metal complex (5.0 microM [Ru(NH(3))(6)]Cl(3)), gold electrodes modified with thiolate-DNA monolayers respond to the presence of these non-electroactive metal cations by producing significant changes in the cyclic voltammograms (i.e., decrease of the integrated charge and shift of formal potential) of the surface-bound redox complex ([Ru(NH(3))(6)](3+)). The divalent cations (particularly Mg(2+)) can be detected at very low concentrations (<10 microM), while the on-set value for K(+) is substantially higher (50 mM). The equilibrium binding constants for Mg(2+) and Ca(2+) to DNA-modified surfaces were calculated.     

Carbon optically transparent electrodes for electrogenerated chemiluminescence

This study investigates pyrolyzed photoresist film (PPF)-based carbon optically transparent electrodes (C-OTEs) for use in electrogenerated chemiluminescence (ECL) studies. Oxidative-reductive ECL is obtained with a well-characterized ECL system, C8S3 J-aggregates with 2-(dibutylamino)ethanol (DBAE) as coreactant. Simultaneous cyclic voltammograms (CVs) and ECL transients are obtained for three thicknesses of PPFs and compared to nontransparent glassy carbon (GC) and the conventional transparent electrode indium tin oxide (ITO) in both front face and transmission electrode cell geometries. Despite positive potential shifts in oxidation and ECL peaks, attributed to the internal resistance of the PPFs that result from their nanoscale thickness, the PPFs display similar ECL activity to GC, including the low oxidation potential (LOP) observed for amine coreactants on hydrophobic electrodes. Reductive-oxidative ECL was obtained using the well-studied ECL luminophore Ru(bpy)(3)(2+), where the C-OTEs outperformed ITO because of electrochemical instability of ITO at very negative potentials. The C-OTEs are promising electrodes for ECL applications because they yield higher ECL than ITO in both oxidative-reductive and reductive-oxidative ECL modes, are more stable in alkaline solutions, display a wide potential window of stability, and have tunable transparency for more efficient detection of ECL.     

PVC ion-selective electrodes based on calcium bis-[dialkyl- and di-(4-alkylphenyl) phosphates] and mixed solvent mediators

PVC calcium ion-selective electrodes based on either calcium bis-di(n-decyl)phosphate or calcium bis-di[4-(1,1,3,3-tetramethylbutyl)phenyl]phosphate with various solvent mediators (alone or in pairs) have been evaluated with particular respect to interference from Na(+), K(+), Mg(2+), Sr(2+), Ba(2+), Mn(2+), Cu(2+), Ni(2+) and Zn(2+) ions. PVC calcium ion-selective electrodes based on calcium bis-di[4-(n-octyl)phenyl]phosphate with varied amounts of decan-l-ol plus di-n-octyl phenylphosphonate showed a continuous gradation in selectivity coefficients on going from a high fraction of decan-l-ol to a high fraction of the second mediator. Thus, k(pot)(Ca,Mg) changed from 1.6 for an electrode based exclusively on decan-l-ol to 4.9 x 10(-4) for one based completely on di-n-octyl phenylphosphonate. The corresponding k(pot)(Ca,Na) values were 7.0 x 10(-2) and 1.1 x 10(-3).     

Surface modification of indium tin oxide via electrochemical reduction of aryldiazonium cations

The facile deposition of para-substituted aryl films onto indium-tin oxide (ITO) electrodes by the electrochemical reduction of aryl diazonium salts in acetonitrile is reported. For the deposition conditions used in this report, the aryl film thicknesses are on the order of 1-6 nm, suggesting a multilayer structure. Regardless of the functional group on the aryl diazonium cation, (NO(2), CO(2)H, or fluorene) the electrodeposition behavior onto ITO electrodes is similar to that seen on other electrode materials. XPS and UV-vis data support the introduction of organic functional surface groups to ITO. The blocking behavior of the aryl films on ITO toward the Ru(NH(3))(6)(3+/2+) redox couple is in agreement with electron transfer through conjugated organic layers. The facile preparation of patterned aryl films with regular-spaced 700 nm voids on ITO is also described. Atomic force microscopy and scanning surface potential microscopy on patterned NO(2) aryl films are used to assess the molecular structure and orientation. A 100 mV decrease in the contact potential over NO(2) aryl films relative to bare ITO suggests that the aryl films are loosely structured as deposited with the NO(2) groups oriented at a small angle away from the ITO surface.     

Application of polyaniline/sol-gel derived tetraethylorthosilicate films to an amperometric lactate biosensor.

The electrochemical entrapment of polyaniline (PANI) onto sol-gel derived tetraethylorthosilicate (TEOS) films deposited onto indium-tin-oxide (ITO) coated glass has been utilized for immobilization of lactate dehydrogenase (LDH). The performance of these sol-gel/PANI/LDH electrodes has been investigated as a function of the lactate concentration, applied potential, pH of the medium and interferents. The amperometric response of the electrodes under optimum conditions exhibited a linear relationship from 1 mM to 4 mM. An attempt has been made to extend the linearity up to 10 mM for lactate by coating an external layer of polyvinyl chloride (PVC) over the sol-gel/PANI/LDH electrodes with a correlation coefficient of 0.89. These sol-gel/PANI/LDH electrodes have a response time of about 60 s, a shelf life of about 8 weeks at 0-4 degrees C and have implications in a lactate biosensor.     

Electrochemical control of protein monolayers at indium tin oxide surfaces for the reagentless optical biosensing of nitric oxide

Cytochrome c has been immobilized onto functionalized, optically transparent indium tin oxide (ITO) electrodes by covalent and electrostatic techniques. Covalent immobilization was achieved by the formation of a disulfide bond between N-succinimidyl 3-(2-pyridyldithio)propionate-(SPDP-) modified cytochrome c and SPDP-silanized ITO. Additionally, ITO electrodes have been modified with the bifunctional reagent 1,12-dodecanedicarboxylic acid (DDCA), resulting in formation of a carboxylic acid-terminated monolayer. Covalent protein attachment to the DDCA-functionalized ITO was achieved with the cross-linker 1-[3-(dimethylamino)propyl]-3-ethylcarbodiimide hydrochloride. Electrostatic attachment of the protein involved ion-pair and hydrogen-bond interactions between the terminating carboxylic acid groups of the DDCA-functionalized ITO and the primary amine groups of the lysine residues of cytochrome c. The electrostatic interaction between the cytochrome c and the functionalized ITO resulted in greater rotational mobility of the protein at the electrode surface, leading to ca. 63% electroactivity, as compared to ca. 41% electroactivity for the covalently immobilized protein. The redox state of the electrostatically bound cytochrome c monolayers could be electrochemically switched between ferric and ferrous forms. Electrochemical control of the bound protein was used to regenerate the biosensing surface following binding of nitric oxide (NO). Ligation of NO with the cytochrome c was monitored by measurement of the change of absorbance intensity at 416 nm. Through application of a negative potential, the cytochrome c was reduced from the ferric to the ferrous form, which led to the removal of the ligated NO. Application of a positive potential regenerated the ferric cytochrome c, enabling multiple repeat measurements of NO. Such electrochemical control of proteins immobilized on transparent electrodes enables the optical biosensing of analyte targets without recourse to exogenous reagents.     

Role of Ca(2+) in diallyl disulfide-induced apoptotic cell death of HCT-15 cells

Diallyl disulfide (DADS) induced apoptosis through the caspase-3 dependent pathway in leukemia cells was earlier reported from this laboratory. In this study, we investigated the involvement of Ca(2+) in DADS-induced apoptotic cell death of HCT-15, human colon cancer cell line. DADS induced the elevation of cytosolic Ca(2+) by biphasic pattern; rapid Ca(2+) peak at 3 min and following slow and sustained elevation till 3 h after the addition of DADS. Production of H(2)O(2) was also observed with its peak value at 4 h. Apoptotic pathways including the sequence of caspase-3 activation, poly(ADP-ribose) polymerase cleavage, and DNA fragmentation by DADS were completely blocked by various inhibitors such as specific caspase-3 inhibitor, free radical scavenger, and intracellular Ca(2+) chelator. N-acetylcystein and catalase treatment prevented the accumulation of H2O2 and later caspase-3 dependent apoptotic pathway. However, these radical scavengers did not block the elevation of intracellular Ca(2+). Treatment of cells with 1, 2-bis (2-aminophenoxyethane)-N, N, N-tetraacetic acid tetrakis -acetoxymethyl ester (BAPTA-AM), cellular Ca(2+) chelator, resulted in a complete blockage of the caspase-3 dependent apoptotic pathway of HCT-15 cells. It abolished the elevation of intracellular Ca(2+), and furthermore, completely inhibited the production of H(2)O(2). These results indicate that cytosolic Ca(2+) elevation is an earlier signaling event in apoptosis of HCT-15 cells. Collectively, our data demonstrate that DADS can induce apoptosis in HCT-15 cells through the sequential mechanism of Ca(2+) homeostasis disruption, accumulation of H(2)O(2), and resulting caspase-3 activation.     

Protective effects of fustin, a flavonoid from Rhus verniciflua Stokes, on 6-hydroxydopamine-induced neuronal cell death

6-Hydroxydopamine (6-OHDA) is a neurotoxin and is commonly used to generate experimental models of Parkinson's disease (PD). In this study, we investigated the signaling molecules involved in the 6-OHDA-induced cell death using a neuronal catecholaminergic cell line (SK-N-SH cells), and the protective effect of fustin, a flavonoid from Rhus verniciflua Stokes, on 6-OHDA-induced neuronal death. 6-OHDA significantly increased levels of reactive oxygen species (ROS), intracellular Ca(2+) ([Ca(2+)](i)), and p38 phosphorylation. In addition, this ROS increase by 6-OHDA was reduced by pretreatment with N-acetylcysteine (NAC), a free radical scavenger, but not by bis-(o-aminophenoxy)-ethane-N,N,N,N-tetraacetic acid (BAPTA), a Ca(2+) chelator. However, the [Ca(2+)](i) increase induced by 6-OHDA was suppressed by NAC. Moreover, pretreatment with NAC or BAPTA significantly prevented the 6-OHDA-induced increases in p38 phosphorylation, Bax/Bcl-2 ratio, and caspase-3 activity. Although 6-OHDA-increased phosphorylation of p38 was prevented by NAC or BAPTA, inhibition of p38 by SB203580 did not suppress ROS, Bax/Bcl-2 ratio, or caspase-3 activity increases, and only partially prevented 6-OHDA-induced cell death, thus demonstrating that p38 activation is a component of a signaling pathway leading to the initiation of 6-OHDA-induced cell death, which acts in parallel with an ROS-Ca(2+)-Bcl-2-caspase-3 pathway. Moreover, fustin not only suppressed 6-OHDA-induced cell death in a concentration-dependent manner but also blocked 6-OHDA-induced increases in ROS, [Ca(2+)](i), Bax/Bcl-2 ratio, caspase-3 activity, and p38 phosphorylation. These results suggest that fustin exerts neuroprotection against 6-OHDA-induced cell death.     

Amperometrische bestimmung der metalle unter anwendung von thioacetamid-X Bestimmung von kupfer in saurem pH-Gebiet

A method is described for the amperometric titration of copper with thioacetamide (TAA) at pH 2-6, and at room temperature. Current is recorded with a potential in the range -0.25 to -0.40 V applied across a dropping mercury and calomel electrodes. The presence of Zn(2+), Tl(+), Pb(2+), Fe(2+), Co(2+) and Ni(2+), even in thousandfold excess, causes no interference. The reaction is rapid at room temperature, and the mean error lies between 1 and 2%.     

Functionalized polypyrrole nanotube arrays as electrochemical biosensor for the determination of copper ions

A novel electrochemical biosensor based on functionalized polypyrrole (PPy) nanotube arrays modified with a tripeptide (Gly-Gly-His) proved to be highly effective for electrochemical analysis of copper ions (Cu²⁺). The vertically oriented PPy nanotube arrays were electropolymerized by using modified zinc oxide (ZnO) nanowire arrays as templates which were electrodeposited on indium–tin oxide (ITO) coated glass substrates. The electrodes were functionalized by appending pyrrole-α-carboxylic acid onto the surface of polypyrrole nanotube arrays by electrochemical polymerization. The carboxylic groups of the polymer were covalently coupled with the amine groups of the tripeptide, and its structural features were confirmed by attenuated total reflection infrared (ATR-IR) spectroscopy. The tripeptide modified PPy nanotube arrays electrode was used for the electrochemical analysis of various trace copper ions by square wave voltammetry. The electrode was found to be highly sensitive and selective to Cu²⁺ in the range of 0.1–30 μM. Furthermore, the developed biosensor exhibited a high stability and reproducibility, despite the repeated use of the biosensor electrode.     

Electrochemical detection of a breast cancer susceptible gene using cDNA immobilized chitosan-co-polyaniline electrode

An electrochemical breast cancer biosensor based on a chitosan-co-polyaniline (CHIT-co-PANI) copolymer coated onto indium-tin-oxide (ITO) was fabricated by immobilizing the complementary DNA (cDNA) probe (42 bases long) associated with the breast cancer susceptible gene BRCA1. Both the CHIT-co-PANI/ITO and the cDNA/CHIT-co-PANI/ITO electrodes were characterized with Fourier transform infrared (FTIR) spectroscopy, atomic force microscopy (AFM), cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). For the cDNA/CHIT-co-PANI/ITO electrode, the amperometric current decreased linearly with an increasing logarithm of molar concentration of the single-stranded target DNA (ssDNA) within the range of 0.05-25 fmol. The bioelectrode exhibited a sensitivity of 2.104 μA/fmol with a response time of 16 s. The cDNA/CHIT-co-PANI/ITO electrode had a shelf life of about six months, even when stored at room temperature.     

Electropolymerization of vinylbipyridine complexes of ruthenium(II) and osmium(II) in SiO2 sol-gel films

PF(6)(-) salts of the complexes [Ru(vbpy)(3)](2+) and [Os(vbpy)(3)](2+) (vbpy = 4-methyl-4'-vinyl-2,2'-bipyridine) have been electropolymerized into the pores of SiO(2) sol-gel films deposited on conductive Tin(IV)-doped indium oxide-coated glass slides (ITO, In(2)O(3):Sn). The resulting transparent composites represent a new class of materials of general formulas ITO/SG-poly-[Ru(vbpy)(3)](PF(6))(2) and ITO/SG-poly-[Os(vbpy)(3)](PF(6))(2). The composites are stable with respect to loss of complexes to the external solution and demonstrate several interesting phenomena: (1) Sol-gel pores, serving as diffusion channels for the vbpy complexes and counterions, play a key role in the formation of the polymer and dictate the electrochemical properties of the resulting composite. (2) Dynamic polymer growth occurs within individual diffusion channels creating parallel structures of filled and unfilled channels. (3) Unidirectional charge transfer and a "bilayer" effect have been shown to operate in ITO/SG-poly-[Ru(vbpy)(3)](PF(6))(2) films exposed to [Os(vbpy)(3)](PF(6))(2) in the external solution. (4) Photophysical properties of the metal-to-ligand charge transfer (MLCT) excited states in ITO/SG-poly-[Ru(vbpy)(3)](PF(6))(2) composites are significantly modified compared to electropolymerized films on ITO or model monomeric complexes in solution.     

The structure of organometals determines cytotoxicity and alteration of calcium homeostasis in HL-60 cells

There is increasing concern about the degradation and metabolisation as well as the biochemical mechanisms of action of organometallic compounds. They are known to be immunotoxic and/or neurotoxic. Because of their different toxic capacities, the development of a reliable correlation between molecular parameters and biochemical effects, which could be helpful in risk assessment, was an aim of this study. The tested organolead and -tin compounds decrease the viability of human cells in culture in a time- and concentration-dependent manner. Parabolic QSAR(1)(1) The abbreviations used are: TMT, trimethyltin chloride; TET, triethyltin bromide; TPT, tripropyltin chloride; TBT, tri- n-butyltin chloride; DBT, di- n-butyltin dichloride; TEL, triethyllead chloride; DEL, diethyllead dichloride; TML, trimethyllead chloride; TPhL, triphenyllead chloride; QSAR, quantitative structure-activity relationships; TSA, total surface area; MW(ion), ionic molecular weight; fMLP, N-formyl-L-methionyl-L-leucyl-L-phenylalanine; fluo-3, fluo-3 free acid; fluo-3 AM, fluo-3 acetoxymethyl ester; Me(2)SO, dimethyl sulfoxide; PLA(2), phospholipase A(2) (EC 3.1.1.4); FCS, fetal calf serum; HEPES, 4-(2-hydroxy-ethyl)-1-piperazineethanesulfonic acid; EGTA, [ethylene-bis(oxyethylenenitrilo)]tetraacetic acid; [Ca(2+)](i), cytosolic free Ca(2+) concentration models yield an adequate correlation between toxicity expressed as LC(50) and structural parameters like ionic molecular weight (MW(ion)) or total surface area (TSA). Two main chemical attributes of the organometals are probably responsible for such a parabolic relationship: the hydrophobic side chain and the polar metal atom. Furthermore, all tested organometal compounds evoke a persistent increase of the cytosolic free calcium concentration [Ca(2+)](i). This effect is mainly due to an influx from the extracellular space. Further results suggest that Ca(2+) enters the cell via opened calcium channels. Based on the essential role of Ca(2+) within cellular signalling, the perturbation of calcium homeostasis appears to be an important event in final cell killing by organometals and it is most likely that other biochemical mechanisms, e.g. activation of phospholipase A(2), are possibly mediated by an increase of [Ca(2+)](i).     

汞修饰掺锡三氧化二铟导电玻璃光透薄层电化学池的设计

报道了汞膜修饰掺锡三氧化二铟导电玻璃电极的制备及其薄层电化学池的设计，测试限电极和薄层的光、电化学性能，在水溶液中，与基底电极相比，该电极的负电位范围增加了７００ｍＶ，并表现出普通汞电极的电化学 性质，以此电极制得的电极制得的薄层层池可适用于氧化还原电位较负的电化学过程的光谱电化学研究及金属离子的电化学分析。     

Adsorption of Pb2+, Zn2+, and Cd2+ from waters by amorphous titanium phosphate

In the current study, amorphous titanium phosphate (TiP) was prepared as an adsorbent for heavy metals from waters. Uptake of Pb(2+), Zn(2+), and Cd(2+) onto TiP was assayed by batch tests; a polystyrene-sulfonic acid exchanger D-001 was selected for comparison and Ca(2+) was chosen as a competing cation due to its ubiquitous occurrence in waters. The pH-titration curve of TiP implied that uptake of heavy metals onto TiP is essentially an ion-exchange process. Compared to D-001, TiP exhibits more preferable adsorption toward Pb(2+) over Zn(2+) and Cd(2+) even in the presence of Ca(2+) at different levels. FT-IR analysis of the TiP samples laden with heavy metals indicated that the uptake of Zn(2+) and Cd(2+) ions onto TiP is mainly driven by electrostatic interaction, while that of Pb(2+) ions is possibly dependent upon inner-sphere complex formation, except for the electrostatic interaction. Moreover, uptake of heavy metals onto TiP approaches equilibrium quickly and the exhausted TiP particles could be readily regenerated by HCl solution.     

Electrocrystallization of Phase I, CuTCNQ (TCNQ = 7,7,8,8-Tetracyanoquinodimethane), on indium tin oxide and boron-doped diamond electrodes

The electrochemical reduction of TCNQ to TCNQ*- in acetonitrile in the presence of [Cu(MeCN)4]+ has been undertaken at boron-doped diamond (BDD) and indium tin oxide (ITO) electrodes. The nucleation and growth process at BDD is similar to that reported previously at metal electrodes. At an ITO electrode, the electrocrystallization of more strongly adhered, larger, branched, needle-shaped phase I CuTCNQ crystals is detected under potential step conditions and also when the potential is cycled over the potential range of 0.7 to -0.1 V versus Ag/AgCl (3 M KCl). Video imaging can be used at optically transparent ITO electrodes to monitor the growth stage of the very large branched crystals formed during the course of electrochemical experiments. Both in situ video imaging and ex situ X-ray diffraction and scanning electron microscopy (SEM) data are consistent with the nucleation of CuTCNQ taking place at a discrete number of preferred sites on the ITO surface. At BDD electrodes, ex situ optical images show that the preferential growth of CuTCNQ occurs at the more highly conducting boron-rich areas of the electrode, within which there are preferred sites for CuTCNQ formation.     

Determination of lead in phosphate ore and phosphogypsum

Laser induced breakdown spectroscopy (LIBS) is applied to analyze aqueous solutions of Li(+), Na(+), Ca(2+), Ba(2+), Pb(2+), Cd(2+), Hg(2+) and Er(3+) and suspensions of ErBa(2)Cu(3)O(x) particles (d=0.2 microm). An excimer (308 nm) pumped dye laser with laser pulse at 500 nm and pulse energy at 22+/-2 mJ is used to produce plasma in aqueous solution. Plasma emission lines of the elements are detected by a photodiode array detector. Detection limits of the metal ions are 500 mg/l for Cd(2+), 12.5 mg/l for Pb(2+), 6.8 mg/l for Ba(2+), 0.13 mg/l for Ca(2+), 13 microg/l for Li(+) and 7.5 microg/l for Na(+). No mercury and erbium emission can be detected, even at Hg(2+) and Er(3+) concentrations of up to the g/l range. On the other side, for Er in suspensions of ErBa(2)Cu(3)O(x) particles a more than 10(3) times higher sensitivity is found than for dissolved Er(3+). This result gives a possibility to analyze colloid-borne metal ions with an increased sensitivity.     

Lightweight ITO Electrodes Decorated with Gold Nanostructures for Electrochemical Applications

Gold nanostructures were fabricated on a transparent indium tin oxide (ITO) coated PET substrate by an electrodeposition technique from a potassium gold (III) chloride solution for two different types of applications. It was found that the optical transparency of lightweight ITO electrodes could be maintained by depositing isolated gold nanostructures while opening up the use of these electrodes for inner sphere electron reactions, such as hydroquinone oxidation, which are not possible at ITO electrodes. For practical applications the adhesion of gold to the ITO electrode was improved by modifying the ITO surface with 3‐mercaptopropyl‐trimethoxysilane (MPS). Compared to Au/ITO, the Au/MPS/ITO electrode showed vastly improved electrochemical activity toward various electron transfer reactions when subjected to mechanical stress. The biosensing properties of the Au/MPS/ITO electrode was also investigated by studying the detection of immobilized DNA on the Au/MPS/ITO electrode via electrochemical impedance spectroscopy (EIS).