真空汞固定点黑体辐射源的设计与研制

介绍了中国计量科学研究院研制的真空汞固定点黑体辐射源的结构、工作原理、性能测试结果和不确定度分析。真空汞固定点黑体辐射源灌注的是纯度为99.9999%的高纯汞,黑体空腔开口直径为25 mm,空腔内径为28 mm,深度为260 mm,表面喷涂了NEXTEL 811-21高发射率涂层,采用基于蒙特卡罗黑体发射率仿真计算的方法,计算了黑体空腔在波长为8~14μm的发射率,结果优于0.9999;在真空环境下,测试了真空汞固定点黑体辐射源的温坪曲线和重复性等主要技术指标,结果表明真空汞固定点黑体辐射源温坪稳定性优于2 mK,多次重复性优于1 mK;分析了真空汞固定点黑体辐射源的不确定度来源,其合成标准不确定度为16 mK。     

红外高光谱大气探测仪星载固定点黑体辐射源的研制

介绍了中国计量科学研究院为风云三号05星红外高光谱大气探测仪研制的微型镓固定点星载黑体辐射源。设计了黑体辐射源空腔,其有效发射率优于0.997。针对星载固定点黑体辐射源的结构设计和性能测试展开了研究:星载固定点黑体辐射源17 ℃的温度均匀性仿真结果优于0.01℃;黑体辐射源在真空下均匀性优于0.02 ℃,稳定性优于0.002 ℃(90 min内);在通过满足航天应用的力学冲击等实验后,镓固定点的复现性优于0.03 ℃;微型固定点相变温坪复现实验加热功率与拐点值之间存在较好的线性关系。     

基于微型镓固定点的精密铂电阻温度计原位校准的研究

基于固定点温标传递技术,设计可在镓熔点原位校准的精密铂电阻温度计,并对微型固定点相变温坪特性进行实验分析.实验结果表明:微型镓固定点温坪可持续最大时长为1.2h,温坪在20 min内稳定性优于2.8 mK,复现性优于2.3 mK;微型固定点温坪值与加热温度之间存在线性关系,并且随着加热温度的升高,固定点温坪值越高,通过...     

H500型红外遥感定标高精度真空黑体辐射源的研制

对中国计量科学研究院研制的温度范围覆盖-93~220℃的H500型红外遥感定标高精度真空黑体辐射源进行了介绍。采用圆柱圆锥黑体腔和双层4段PID控温,在真空低背景(液氮冷却)环境下对该黑体进行了性能测试,在大气室温环境下,利用控制环境辐射反射比发射率测量方法测量了黑体空腔发射率和利用红外标准辐射温度计测量空腔底部温度均匀性等指标。实验结果表明,该黑体辐射源升温速率为1℃/min下,控制到温度点的稳定时间优于50 min,并且10 min内的温度稳定性在0.01℃以内;黑体温度设置在20℃、30℃和50℃下空腔发射率的测量结果分别为0.9965、0.9966和0.9963;其黑体底部温度均匀性优于0.03℃;在整个温度区域内扩展不确定度优于0.1℃(k=2)。     

中温区真空标准黑体辐射源研制

介绍了中国计量科学研究院研制的中温区真空标准黑体辐射源的结构设计,工作原理,测试结果和不确定度评定.黑体辐射源工作温度范围为320～500 K,黑体空腔开口直径为50 mm,空腔深度为260 mm,表面喷涂了耐高温漆,空腔发射率优于0.999.真空环境下测试了黑体在335～500K温度范围内的轴向温度均匀性,温度稳定性...     

新型便携式镓熔点炉的研制

中国计量科学研究院最新研制的便携式镓熔点炉采用了先进的半导体制冷和控温技术及有效合理的制冷块分布方式,实现对镓熔点容器的冻制与复现自动化.实验结果显示:该固定点炉从底端起140mm范围内的垂直温场小于0.03℃,温坪时间达到80h以上,复现性优于0.06mK.     

氟利昂热管黑体辐射源性能实验研究

为了满足机场、车站等红外筛检仪器辐射温度现场校准的要求,文章介绍了一种氟利昂热管黑体辐射源。黑体辐射源空腔形状为圆柱-圆锥形,空腔长100 mm,锥角为120腔,法向平均有效发射率计算值为0.995。利用TRT2辐射温度计对黑体辐射源腔底进行辐射温度测量,对热管进行不同角度的倾斜,测得的黑体辐射源温度稳定性优于0.2℃,氟利昂热管空腔内均匀性优于0.2℃,可以满足现场校准需求。     

准绝热法微型镓固定点相变特性研究

介绍了可用于原位校准的微型镓相变固定点形成过程,准绝热测试系统的结构和工作原理,测量了微型镓相变固定点在准绝热测试系统中的相变特性。实验结果表明微型相变镓固定点的相变温度与加热功率之间存在强线性关系,其线性拟合因子R2为0.995 7,并且随着功率越降低,其相变熔化温度越接近镓固定点的标准值。在相同的准绝热复现条件下,其相变温度的复现性优于2 mK。     

大口径高发射率面型黑体辐射源的研制

黑体辐射源作为定标标准器,在红外测量设备的辐射定标中具有重要作用。为应对大口径红外测量设备的辐射定标工作需求,设计了1台辐射面积为400mm×400mm的面型黑体辐射源。采用多路控温和连接固定冷源的方式对黑体进行温度控制;通过热仿真确定合适的传热模型,同时结合高发射率涂层工艺与辐射面的结构设计使黑体具备高发射率,辐射面有效发射率可达到0.992;在真空环境下,利用标准铂电阻温度计测量得到黑体辐射面源的温度均匀性偏差最大为0.101K,稳定性平均值为0.018K/10min,该黑体辐射光源能够满足现阶段大口径红外测量设备的使用需求。     

关于换热器的低温黑体辐射源

介绍一种工作在-80℃～+100℃的基于换热器的新型低温标准黑体辐射源的设计和其发射率的计算.这种黑体辐射源采用液体恒温槽均温致冷和采用气帘隔离法消除低温凝露和结霜,黑体空腔形状为圆锥圆柱型,锥角为120°,空腔内径50mm,腔长为300mm,控温稳定性优于±0.05℃/30min.理论计算的黑体空腔有效发射率为0.998(保留小数点后三位),比对实验测量得到的有效发射率为0.997(保留小数点后三位),二者接近一致.     

Design and Evaluation of Large-Aperture Gallium Fixed-Point Blackbody

To complement existing water bath blackbodies that now serve as NIST primary standard sources in the temperature range from 15 °C to 75 °C, a gallium fixed-point blackbody has been recently built. The main objectives of the project included creating an extended-area radiation source with a target emissivity of 0.9999 capable of operating either inside a cryo-vacuum chamber or in a standard laboratory environment. A minimum aperture diameter of 45 mm is necessary for the calibration of radiometers with a collimated input geometry or large spot size. This article describes the design and performance evaluation of the gallium fixed-point blackbody, including the calculation and measurements of directional effective emissivity, estimates of uncertainty due to the temperature drop across the interface between the pure metal and radiating surfaces, as well as the radiometrically obtained spatial uniformity of the radiance temperature and the melting plateau stability. Another important test is the measurement of the cavity reflectance, which was achieved by using total integrated scatter measurements at a laser wavelength of 10.6 μm. The result allows one to predict the performance under the low-background conditions of a cryo-chamber. Finally, results of the spectral radiance comparison with the NIST water-bath blackbody are provided. The experimental results are in good agreement with predicted values and demonstrate the potential of our approach. It is anticipated that, after completion of the characterization, a similar source operating at the water triple point will be constructed. Certain commercial equipment, instruments, or material are identified in this paper to specify the experimental procedures and result adequately. Such identification is not intended to imply recommendation or endorsement by the National Institute of Standards and Technology, nor is it intended to imply that material or equipment identified are necessarily the best available for the purpose.     

An Oil-Bath-Based 293 K to 473 K Blackbody Source

A high temperature oil-bath-based-black-body source has been designed and constructed in the Radiometric Physics Division at the National Institute of Standards and Technology, Gaithersburg, MD. The goal of this work was to design a large aperture blackbody source with highly uniform radiance across the aperture, good temporal stability, and good reproducibility. This blackbody source operates in the 293 K to 473 K range with blackbody temperature combined standard uncertainties of 7.2 mK to 30.9 mK. The calculated emissivity of this source is 0.9997 with a standard uncertainty of 0.0003. With a 50 mm limiting aperture at the cavity entrance, the emissivity increases to 0.99996.     

100～400K真空红外亮温标准黑体辐射源研制

介绍了中国计量科学研究院研制的100~400K真空红外亮温标准黑体辐射源的工作原理、结构、性能测试方法及测试结果。黑体辐射源通过液氮制冷与3温区控制实现了100~400K范围内的温度控制。在真空环境下,测试了其在温度范围100~400K轴向温度均匀性、底部温度稳定性等技术指标,结果表明均匀性优于0.120K,控温稳定性优于0.020K/20min;在室温大气环境下,利用基于控制环境辐射的发射率测量方法测量了黑体空腔发射率,空腔法向发射率为0.9998。采用基于蒙特卡罗黑体发射率仿真计算方法分析轴向温度均匀性对空腔发射率的影响,分析了标准黑体辐射源的不确定度来源,在8~16 μm波长亮度温度的合成标准不确定度优于0.030K。     

Thermodynamic-temperature determinations of the Ag and Au freezing temperatures using a detector-based radiation thermometer

The development of a radiation thermometer calibrated for spectral radiance responsivity using cryogenic, electrical-substitution radiometry to determine the thermodynamic temperatures of the Ag- and Au-freezing temperatures is described. The absolute spectral radiance responsivity of the radiation thermometer is measured in the NIST Spectral Irradiance and Radiance Responsivity Calibrations using Uniform Sources (SIRCUS) facility with a total uncertainty of 0.15% (k=2) and is traceable to the electrical watt, and thus the thermodynamic temperature of any blackbody can be determined by using Planck radiation law and the measured optical power. The thermodynamic temperatures of the Ag- and Au-freezing temperatures are determined to be 1234.956 K (+/-0.110 K) (k=2) and 1337.344 K(+/-0.129 K) (k=2) differing from the International Temperature Scale of 1990 (ITS-90) assignments by 26 mK and 14 mK, respectively, within the stated uncertainties. The temperatures were systematically corrected for the size- of-source effect, the nonlinearity of the preamplifier and the emissivity of the blackbody. The ultimate goal of these thermodynamic temperature measurements is to disseminate temperature scales with lower uncertainties than those of the ITS-90. These results indicate that direct disseminations of thermodynamic temperature scales are possible.     

Construction and Characterization of a Large Aperture Blackbody for Infrared Radiometer Calibration

A large aperture blackbody (LABB) with a diameter of 1 m has been successfully constructed for calibrating radiation thermometers and infrared radiometers with a wide field of view in the temperature range between 10 °C and 90 °C. The blackbody is a 1 m long cylindro-conical cavity with a diameter of 1.1 m. Its conical bottom has an apex angle of 120°. To achieve good temperature stability and uniformity, the cavity is integrated to a water-bath to which the pressurized water is supplied from a reservoir. To reduce the convection heat loss from the cavity to the ambient, the cavity is purged of the dried air that passes through a coiled tube immersed in the reservoir. For an uncertainty evaluation of the LABB, its temperature stability was measured by using a reference radiation thermometer (RRT) and a platinum resistance thermometer (PRT), and its radiance temperature distributions on the aperture plane were measured by using a thermal camera. Measuring the spectral emissivity of the coating material, the effective emissivity of the blackbody was calculated to be 0.9955 from 1 ??m to 15 ??m. The expanded uncertainty of the radiance temperature scale was evaluated based on the PRT readings, which vary from 0.3 °C to 0.5 °C (k = 2) in the temperature range. The temperature scale is validated by comparing with the RRT of which the temperature scale is realized by a multiple fixed-point calibration.     

基于微型镓基共晶固定点的温度传感器在轨校准方法研究

介绍了微型镓基共晶固定点的灌注工艺和准绝热相变特性测量系统;结合空腔黑体和非近位安装的温度传感器,研究了Ga-Sn和Ga-Zn共晶固定点的相变温坪重复性和Ga固定点的相变温坪长期稳定性;通过特定的热环境下镓及2个镓基共晶固定点三者熔化过程中温度传感器测量到的相变温坪值,对嵌入空腔黑体底部的温度传感器进行校准,其校准结果与实验室常规校准方法得到的结果差异均小于2mK。实验结果表明:在热环境保持不变的条件下,随着相变时间的增加,相变温坪值就越靠近理论上相变物质的熔化温度,即固定点与温度传感器测孔之间的异位温差越小;对于Ga-Sn和Ga-Zn共晶固定点,温度传感器测量到的相变温坪值与加热功率呈线性关系,零功率下的单点校准温度分别为20.352℃和25.187℃。     

A Third Generation Water Bath Based Blackbody Source

A third generation water bath based black-body source has been designed and constructed in the Radiometric Physics Division at the National Institute of Standards and Technology, Gaithersburg, MD. The goal of this work was to design a large aperture blackbody source with improved temporal stability and reproducibility compared with earlier designs, as well as improved ease of use. These blackbody sources operate in the 278 K to 353 K range with water temperature combined standard uncertainties of 3.5 mK to 7.8 mK. The calculated emissivity of these sources is 0.9997 with a relative standard uncertainty of 0.0003. With a 50 mm limiting aperture at the cavity; entrance, the emissivity increases to 0.99997.