A study on the mechanism of high-lift generation by an airfoil in unsteady motion at low reynolds number

The aerodynamic force and flow structure of NACA 0012 airfoil performing an unsteady motion at low Reynolds number (Re=100) are calculated by solving Navier-Stokes equations. The motion consists of three parts: the first translation, rotation and the second translation in the direction opposite to the first. The rotation and the second translation in this motion are expected to represent the rotation and translation of the wing-section of a hovering insect. The flow structure is used in combination with the theory of vorticity dynamics to explain the generation of unsteady aerodynamic force in the motion. During the rotation, due to the creation of strong vortices in short time, large aerodynamic force is produced and the force is almost normal to the airfoil chord. During the second translation, large lift coefficient can be maintained for certain time period and , the lift coefficient averaged over four chord lengths of travel, is larger than 2 (the corresponding steady-state lift coefficient is only 0.9). The large lift coefficient is due to two effects. The first is the delayed shedding of the stall vortex. The second is that the vortices created during the airfoil rotation and in the near wake left by previous translation form a short “vortex street” in front of the airfoil and the “vortex street” induces a “wind”; against this “wind” the airfoil translates, increasing its relative speed. The above results provide insights to the understanding of the mechanism of high-lift generation by a hovering insect. The project supported by the National Natural Science Foundation of China (19725210)     

Large aerodynamic forces on a sweeping wing at low Reynolds number

The aerodynamic forces and flow structure of a model insect wing is studied by solving the Navier-Stokes equations numerically. After an initial start from rest, the wing is made to execute an azimuthal rotation (sweeping) at a large angle of attack and constant angular velocity. The Reynolds number (Re) considered in the present note is 480 (Re is based on the mean chord length of the wing and the speed at 60% wing length from the wing root). During the constant-speed sweeping motion, the stall is absent and large and approximately constant lift and drag coefficients can be maintained. The mechanism for the absence of the stall or the maintenance of large aerodynamic force coefficients is as follows. Soon after the initial start, a vortex ring, which consists of the leading-edge vortex (LEV), the starting vortex, and the two wing-tip vortices, is formed in the wake of the wing. During the subsequent motion of the wing, a base-to-tip spanwise flow converts the vorticity in the LEV to the wing tip and the LEV keeps an approximately constant strength. This prevents the LEV from shedding. As a result, the size of the vortex ring increases approximately linearly with time, resulting in an approximately constant time rate of the first moment of vorticity, or approximately constant lift and drag coefficients. The variation of the relative velocity along the wing span causes a pressure gradient along the wingspan. The base-to-tip spanwise flow is mainly maintained by the pressure-gradient force. The project supported by the National Natural Science Foundation of China (10232010)     

顺桨风力机塔叶干涉翼型非稳气动力时频特性

由于风力机叶片与塔筒流场相互干涉,实际气动力与理想情况存在较大差异,这种干涉作用造成的气动力差异给叶片与塔筒结构可靠性带来不可忽视的影响.以翼型DU91-W2-250为研究对象,采用瞬态数值分析与本征正交分解方法,考虑叶片和塔筒流场相互干涉作用,分析顺桨工况翼型非稳气动力时频特性及其影响规律,量化不同雷诺数下塔叶相对位置及几何参数对气动力均值、波动幅度和频率的影响程度,通过流场模态能量分布形态分析,揭示流场干涉对气动力的影响机制.结果表明,翼型气动中心至塔筒几何中心的垂直距离、水平距离以及塔筒直径相对于翼型弦长的无量纲参数y*,x*和D*对气动力均有不同程度影响,其中y*对升阻力系数均值影响最大,对频率无明显影响,y*绝对值越大,C_l均值越接近单翼型C_l值,y*绝对值越小升阻力系数波动幅度越大,y*从-12增大到12,升力系数均值最小值为-0.48,最大值为1.16;x*减小和D*增大,反向阻力均值增大,波动幅度增大,波动频率略有下降,当x*小于临界值5时,带塔翼型阻力均值反向;在计算范围内,带塔翼型升力系数均值相对于单翼型升力系数最大偏差为...     

Analyzing the fluctuating pressures acting on a circular cylinder using stochastic decomposition

Fluctuating wind pressures acting on bluff bodies are influenced by approaching turbulence and signature (body-induced) turbulence. For a circular cylinder, the signature turbulence is closely related to the formation of Karman vortex shedding. In this paper, proper orthogonal decomposition (POD) and spectral proper transformation techniques (SPT) are applied to the pressure fluctuations acting on a circular cylinder. The physical relationships between the decomposed modes and vortex shedding are discussed to identify the dominant aerodynamic behavior (lift or drag) and to evaluate its contribution to overall behavior. The effect of Reynolds number (Re) is also addressed. It is found that the application of POD and SPT can separate the along-wind and across-wind effects on the cylinder model in both subcritical and supercritical regimes. In contrast to POD, the SPT mode is formulated in the frequency domain, and the dynamic coherent structures can be defined in terms of amplitude and phase angle, which allows detection of the advection features of vortex shedding. In addition, it is observed that the energy contribution of the shedding induced lift force increases with Re and gradually becomes a dominant aerodynamic force at Reynolds numbers in the supercritical regime.     

VORTEX SHEDDING RESONANCE FROM A ROTATIONALLY OSCILLATING CYLINDER

Vortex shedding resonance of a circular cylinder wake to a forced rotational oscillation has been investigated experimentally by measuring the velocity fluctuations in the wake, pressure distributions over the cylinder surface, and visualizing the flow field with respect to cylinder oscillations. The vortex shedding resonance occurs near the natural shedding frequency at small amplitude of cylinder oscillations, while the peak resonance frequency shifts to a lower value with an increase in oscillation amplitude. The drag and lift forces acting on the cylinder at fixed forcing Strouhal number indicate that the phase lag of fluid forces to the cylinder oscillations increases with an increase in oscillation amplitude, supporting the variation of resonance frequency with oscillation amplitude. The comparative study of the measured pressure distributions and the simultaneous flow visualizations with respect to cylinder rotation shows the mechanisms of phase lag, which is due to the strengthened vortex formation and the modification of the surface pressure distributions.     

Suppression of lift fluctuations on a circular cylinder by inducing the symmetric vortex shedding mode

The flow around a stationary circular cylinder modified by two synthetic jets positioned at the mean separation points is numerically studied. The Reynolds number based on the free-stream velocity and the circular cylinder diameter is Re=500. The focus is to present a novel way to suppress the lift fluctuations by changing the vortex shedding mode, and thus particular attention is paid to the interactions between the synthetic jets and wake shear layers and the resulting vortex dynamics. The overall influences of both momentum coefficient and excitation frequency are discussed. In some simulated cases, the vortex lock-on phenomenon is discovered, which causes the typical Kàrmàn type vortex shedding to be converted into the symmetric shedding modes, leading to the complete suppression of lift fluctuations. In other cases, the asymmetric shedding mode still dominates the wake evolution. Detailed vortical evolution for each typical wake pattern is analyzed to reveal the control mechanism. Additionally, the control effectiveness is evaluated, indicating that the present control strategy contributes an effective way to suppress the lift fluctuations and reduce the mean drag.     

Mean and fluctuating components of drag and lift forces on an isolated finite-sized particle in turbulence

We perform fully resolved direct numerical simulations of an isolated particle subjected to free-stream turbulence in order to investigate the effect of turbulence on the drag and lift forces at the level of a single particle, following Bagchi and Balachandar’s work (Bagchi and Balachandar in Phys Fluids 15:3496–3513, 2003). The particle Reynolds numbers based on the mean relative particle velocity and the particle diameter are Re?=?100, 250 and 350, which covers three different regimes of wake evolution in a uniform flow: steady axisymmetric wake, steady planar symmetric wake, and unsteady planar symmetric vortex shedding. At each particle Reynolds number, the turbulent intensity is 5–10% of the mean relative particle velocity, and the corresponding diameter of the particle is comparable to or larger than the Kolmogorov scale. The simulation results show that standard drag values determined from uniform flow simulations can accurately predict the drag force if the turbulence intensity is sufficiently weak (5% or less compared to the mean relative velocity). However, it is shown that for finite-sized particles, flow non-uniformity, which is usually neglected in the case of the small particles, can play an important role in determining the forces as the relative turbulence intensity becomes large. The influence of flow non-uniformity on drag force could be qualitatively similar to the Faxen correction. In addition, finite-sized particles at sufficient Reynolds number are inherently subjected to stochastic forces arising from their self-induced vortex shedding in addition to lift force arising from the local ambient flow properties (vorticity and strain rate). The effect of rotational and strain rate of the ambient turbulence seen by the particle on the lift force is explored based on the conditional averaging using the generalized representation of the quasi-steady force proposed by Bagchi and Balachandar (J Fluid Mech 481:105–148, 2003). From the present study, it is shown that at Re?=?100, the lift force is mainly influenced by the surrounding turbulence, but at Re = 250 and 350, the lift force is affected by the wake structure as well as the surrounding turbulence. Thus, for a finite-sized particle of sufficient Reynolds number supporting self-induced vortex shedding, the lift force will not be completely correlated with the ambient flow. Therefore, it appears that in order to reliably predict the motion of a finite-sized particle in turbulence, it is important to incorporate both a deterministic component and a stochastic component in the force model. The best deterministic contribution is given by the conditional average. The influence of ambient turbulence at the scale of the particle, which are not accounted for in the deterministic contribution, can be considered in stochastic manner. In the modeling of lift force, additional stochastic contribution arising from self-induced vortex shedding must also be included.     

圆柱绕流的电磁控制

流体绕过非流线物体时，在物体尾部形成涡街，使其表面周期性变化的阻力和升力增加，从而导致物体振荡，产生噪音。本文通过实验和计算，研究圆柱绕流的电磁控制，阐述浸于弱电介质溶液中，表面包覆电磁激活板的圆柱，在电磁力作用下的流体控制原理，讨论电磁力的消涡、减阻和减振过程。     

Wall proximity effects on the effectiveness of upstream control rod

Two dimensional flow over a circular cylinder with an upstream control rod of same diameter is simulated in unbound condition and in wall bounded conditions. The cylinders are placed at various heights from the wall and the inter-distance between cylinders is also varied. The control rod is subjected to different rotation rates. It is found that, in unbound condition, rotating the control rod decreases the critical pitch length (S/D_cr) and increases the drag and Strouhal number of the main cylinder. In presence of plane wall, the shielding provided by the separated shear layers from the control rod in cavity regime is deteriorated due to deflection of shear layers which results in higher drag and large fluctuation of lift coefficient. However, in wake impingement regime, the binary vortices from the control rod are weakened due to diffusion of vorticity and hence, the main cylinder experiences a lower drag and small lift fluctuations than that of unbound condition. The critical height of vortex suppression (H/D_cr) is higher in cavity regime than that of wake impingement regime due to the single extended-bluff body like configuration. The rotation of control rod energizes the wall boundary layer and increases the critical height of vortex suppression. Increasing the rotational rate of control rod decreases the drag force and reduces the amplitude of lift fluctuation. Analysis of the wall shear stress distribution reveals that it suffers a sudden drop at moderate height where the normal Karman vortex shedding changes to irregular shedding consisting of single row of negative vortices. Modal structures obtained from dynamic mode decomposition (DMD) reveal that the flow structures behind the main cylinder are suppressed due to wall and the flow is dominated by the wake of control rod.     

可变形儒可夫斯基翼型亚音速非定常气动力的研究

对于翼面变形速度远小于来流速度情况下的儒可夫斯翼型亚音速绕流问题,通过仿射变换将可压缩流动转换成不可压缩流动,将解析解和离散涡方法相结合计算变形机翼的不可压缩流动速度场,再利用逆变换得到变形机翼的亚音速流动速度场,进而分析非定常气动力特性,建立变形机翼的准定常升力系数和非定常附加升力系数在可压缩和不可压缩两种状态下的简单近似对应关系。计算结果显示变形机翼的非定常气动升力近似等于准定常计算结果叠加上虚拟质量力导致的非定常附加升力,该非定常附加升力随翼型变形速率呈线性关系,由机翼当前时刻飞行姿态、翼型及其变形速率确定,与具体变形历史过程无关。低来流马赫数时虚拟质量力导致的非定常效应显著,高亚音速流动时准定常升力起主导作用。同时还分析了不同马赫数下机翼往复变形过程中升力的变化特性,指出尽管高亚音速变形机翼的气动升力近似等于准定常气动升力,但不能忽视非定常附加升力的影响,非定常附加升力将导致完成往复变形需要外界输入正比于Ma∞/[(1-Ma2∞)]的功。     

Aerodynamic loading on a cylinder behind an airfoil

The interaction between the wake of a rotor blade and a downstream cylinder holds the key to the understanding and control of electronic cooling fan noise. In this paper, the aerodynamic characteristics of a circular cylinder are experimentally studied in the presence of an upstream NACA 4412 airfoil for the cylinder-diameter-based Reynolds numbers of Re_d=2,100–20,000, and the airfoil chord-length-based Reynolds numbers of Re_c=14,700–140,000. Lift and drag fluctuations on the cylinder, and the longitudinal velocity fluctuations of the flow behind the cylinder were measured simultaneously using a load cell and two hot wires, respectively. Data analysis shows that unsteady forces on the cylinder increase significantly in the presence of the airfoil wake. The dependence of the forces on two parameters is investigated, that is, the lateral distance (T) between the airfoil and the cylinder, and the Reynolds number. The forces decline quickly as T increases. For Re_c<60,000, the vortices shed from the upstream airfoil make a major contribution to the unsteady forces on the cylinder compared to the vortex shedding from the cylinder itself. For Re_c>60,000, no vortices are generated from the airfoil, and the fluctuating forces on the cylinder are caused by its own vortex shedding.     

Numerical simulation of Reynolds number effects on velocity shear flow around a circular cylinder

Three-dimensional Direct Numerical Simulation (DNS) and Large Eddy Simulation (LES) are performed to investigate the shear effects on flow around a circular cylinder at Reynolds numbers of Re=60–1000. The shear parameter, β, which is based on the velocity gradient, cylinder diameter and upstream mean velocity at the center plane of the cylinder, varies from 0 to 0.30. Variations of Strouhal number, drag and lift coefficients, and unsteady wake structures with shear parameter are studied, along with their dependence on Reynolds number. The presented simulation provides detailed information for the flow field around a circular cylinder in shear flow. This study shows that the Strouhal number exhibits no significant variation with shear parameter. The stagnation point moves to the high-velocity side almost linearly with shear parameter, and this result mainly influences the aerodynamic forces acting on a circular cylinder in shear flow. Both the Reynolds number and shear parameter influence the movement of the stagnation point and separation point. Mode A wake instability is suppressed into parallel vortex shedding mode at a certain shear parameter. The lift force increases with increasing shear parameter and acts from the high-velocity side to the low-velocity side. In addition, a simple method to estimate the lift force coefficient in shear flow is provided.     

On the development of lift and drag in a rotating and translating cylinder

The two-dimensional flow around a rotating cylinder is investigated numerically using a vorticity forces formulation with the aim of analyzing quantitatively the flow structures, and their evolutions, that contribute to the lift and drag forces on the cylinder. The Reynolds number considered, based on the cylinder diameter and steady free stream speed, is Re=200, while the non-dimensional rotation rate (ratio of the surface speed and free stream speed) selected was α=1 and 3. For α=1 the wake behind the cylinder for the fully developed flow is oscillatory due to vortex shedding, and so are the lift and drag forces. For α=3 the fully developed flow is steady with constant (high) lift and (low) drag. Each of these cases is considered in two different transient problems, one with angular acceleration of the cylinder and constant speed, and the other one with translating acceleration of the cylinder and constant rotation. We characterize quantitatively the contributions of individual fluid elements (vortices) to aerodynamic forces, explaining and quantifying the mechanisms by which the lift is generated in each case. In particular, for high rotation (when α=3), we explain the relation between the mechanisms of vortex shedding suppression and those by which the lift is enhanced and the drag is almost suppressed when the fully developed flow is reached.     

Effects of a trapped vortex cell on a thick wing airfoil

The effects of a trapped vortex cell (TVC) on the aerodynamic performance of a NACA0024 wing model were investigated experimentally at Re = 10⁶ and 6.67×10⁵6.67\times 10^{5}. The static pressure distributions around the model and the wake velocity profiles were measured to obtain lift and drag coefficients, for both the clean airfoil and the controlled configurations. Suction was applied in the cavity region to stabilize the trapped vortex. For comparison, a classical boundary layer suction configuration was also tested. The drag coefficient curve of the TVC-controlled airfoil showed sharp discontinuities and bifurcative behavior, generating two drag modes. A strong influence of the angle of attack, the suction rate and the Reynolds number on the drag coefficient was observed. With respect to the clean airfoil, the control led to a drag reduction only if the suction was high enough. Compared to the classical boundary layer suction configuration, the drag reduction was higher for the same amount of suction only in a specific range of incidence, i.e., α = −2° to α = 6° and only for the higher Reynolds number. For all the other conditions, the classical boundary layer suction configuration gave better drag performances. Moderate increments of lift were observed for the TVC-controlled airfoil at low incidence, while a 20% lift enhancement was observed in the stall region with respect to the baseline. However, the same lift increments were also observed for the classical boundary layer suction configuration. Pressure fluctuation measurements in the cavity region suggested a very complex interaction of several flow features. The two drag modes were characterized by typical unsteady phenomena observed in rectangular cavity flows, namely the shear layer mode and the wake mode.     

Numerical study of the suppression mechanism of vortex-induced vibration by symmetric Lorentz forces

In this paper, the electro-magnetic control of vortex-induced vibration (VIV) of a circular cylinder is investigated numerically based on the stream function–vorticity equations in the exponential–polar coordinates attached on the moving cylinder for Re=150. The effects of the instantaneous wake geometries and the corresponding cylinder motion on the hydrodynamic forces for one entire period of vortex shedding are discussed using a drag–lift phase diagram. The drag–lift diagram is composed of the upper and lower closed curves due to the contributions of the vortex shedding but is magnified, translated and turned under the action of the cylinder motion. The Lorentz force for controlling the vibration cylinder is classified into the field Lorentz force and the wall Lorentz force. The symmetric field Lorentz force will symmetrize the flow passing over the cylinder and decreases the lift oscillation, which, in turn, suppresses the VIV, whereas the wall Lorentz force has no effect on the lift. The cylinder vibration increases as the work performed by the lift dominates the energy transfer. Otherwise, the cylinder vibration decreases. If the net transferred energy per motion is equal to zero, the cylinder will vibrate steadily or be fixed.     

NEURAL NETWORK CONTROL OF VORTEX SHEDDING FROM A CIRCULAR CYLINDER USING ROTATIONAL FEEDBACK OSCILLATIONS

The performance of active control of vortex shedding from a circular cylinder is studied experimentally with rotational feedback oscillations. The optimization of the control parameters, such as the phase lag, the feedback gain, and the position of reference sensor are carried out using neural networks to minimize the reference velocity fluctuations in the cylinder wake. Measurement of pressure distributions over the circular cylinder under the optimum control indicate that the drag force is reduced by 16% and the lift force is suppressed by more than 70% in comparison with the stationary cylinder.     

Frequency effects on lift and drag for flow past an oscillating cylinder

A transversely oscillating cylinder in a uniform flow is modeled to investigate frequency effects of flow-induced wake on lift and drag of the cylinder. Specifically, verified unsteady fluid dynamic simulations using an immersed-boundary method in a fixed Cartesian grid predict the flow structure around the cylinder and reveal how the integration of surface pressure and shear distributions provides lift and drag on the oscillating cylinder. In this study, frequency ranges to be considered are both near and away from the natural frequency of wake vortex shedding. Subsequently, the effects of frequency lock-in, superposition and demultiplication on lift and drag are discussed based on the spectral analysis of time histories of lift and drag.     

Lift enhancement and flow structure of airfoil with joint trailing-edge flap and Gurney flap

The impact of Gurney flaps (GF), of different heights and perforations, on the aerodynamic and wake characteristics of a NACA 0015 airfoil equipped with a trailing-edge flap (TEF) was investigated experimentally at Re = 2.54 × 10⁵. The addition of the Gurney flap to the TEF produced a further increase in the downward turning of the mean flow (increased aft camber), leading to a significant increase in the lift, drag, and pitching moment compared to that produced by independently deployed TEF or GF. The maximum lift increased with flap height, with the maximum lift-enhancement effectiveness exhibited at the smallest flap height. The near wake behind the joint TEF and GF became wider and had a larger velocity deficit and fluctuations compared to independent GF and TEF deployment. The Gurney flap perforation had only a minor impact on the wake and aerodynamics characteristics compared to TEF with a solid GF. The rapid rise in lift generation of the joint TEF and GF application, compared to conventional TEF deployment, could provide an improved off-design high-lift device during landing and takeoff.     

Numerical investigations into effects of three-dimensional wake patterns on unsteady aerodynamic characteristics of a circular cylinder at Re=1.3×105

In contrast with a wide range of applications concerning flows around a circular cylinder at upper subcritical Reynolds numbers (Re), there is no systematic understanding about the fundamentals of so-called random flow patterns, and their effects on intermittent modulations in the time history of pressure or force, and the decrease in their spanwise correlations. This paper employed the large-eddy simulation (LES) technique to predict flows past a circular cylinder at Re=1.3×10⁵ and to provide images based on flow visualization that can clarify the physical mechanism responsible for these outcomes. A reasonably sufficient spanwise length was adopted for the numerical model by taking into consideration the effect of aspect ratios (the spanwise length to the diameter). We found that even at such high Res, a three-dimensional pattern of vortical field is present in the wake resulting in total force modulation and weak spanwise correlation, e.g., obvious oblique shedding. The whole development process of the three-dimensional wake is exhibited as a universal. The results revealed that local phase variations in primary vortex shedding are the starting points of three-dimensional wake patterns, which are induced by the “irregular” streamwise vortex. The three-dimensional near wake following local phase variations is associated with a successive evolution composed of certain stages in order. Quantitative analyses based on the time series of sectional lift coefficients show that intermittent increase in primary shedding periods and sectional lift streak divisions are closely related to local phase variations and vortex division in the development process of the three-dimensional pattern. In addition to the phase difference along the span, the three-dimensional pattern also weakens vortex shedding in cross sections perpendicular to the axis of the cylinder, resulting in modulation of the sectional lift coefficient.