天青Ⅰ为电子媒介体金纳米颗粒修饰葡萄糖生物传感器

用纳米金溶胶与聚乙烯醇缩丁醛(PVB)构成复合固酶基质,采用溶胶凝胶法固定葡萄糖氧化酶(GOx)于铂金电极表面,并在葡萄糖溶液中加入天青Ⅰ作为电子媒介体,制成了新型葡萄糖生物传感器。实验证明,葡萄糖氧化酶吸附在纳米金颗粒表面上稳定且保持其生物活性;而电子媒介体的存在,显著提高了传感器的响应灵敏度。该传感器对葡萄糖响应的线性范围为2.5×10-5～7.5×10-3mol/L;检出限为8.5×10-6mol/L(S/N=3)。该生物传感器用于人体血清中的葡萄糖测定,结果令人满意。     

电流型聚吡咯碘离子化学修饰电极的制备与性能研究

在玻碳电极(GCE)表面上修饰了一层导电聚合物 聚吡咯(Ppy)薄膜,用循环伏安法制备了新型的基于电流响应的掺杂碘离子的聚吡咯修饰电极;研究了电极的电化学特性。此修饰电极对碘离子的响应是基于碘离子在Ppy膜与电解质溶液中的掺杂平衡以及Ppy膜中的碘离子在修饰电极表面的氧化还原过程;制成的电流型电极对5 0×10-2mol/L～1 0×10-5mol/L的碘离子呈良好的线性响应关系,检出限为6 0×10-6mol/L。     

Nafion-二茂铁-双酶修饰的葡萄糖传感器

用二茂铁作为过氧化物酶与玻碳电极的电子传递体,通过牛血清白蛋白-戊二醛交联剂把葡萄糖氧化酶和过氧化物酶固定在Nafion-二茂铁修饰玻碳电极上,制备成葡萄糖传感器。由于工作电位低,电活性物质如抗坏血酸、尿酸等对测定无干扰。该传感器的线性范围为5.0×10～(-4)～2.5×10～(-2)mol/L,响应时间小于30s.     

三氧化二铝溶胶-凝胶固定过氧化氢生物传感器

三氧化二铝溶胶凝胶将辣根过氧化物酶和硫堇同时固定在玻碳电极上,紫外-可见光谱结果表明酶在固定过程中生物活性保持得较好.传感器在pH 7.0外加电压为-0.22 V条件下,对过氧化氢浓度为1.76×10-3～5.5×10-2 mol/L的范围内呈线性响应,检出限为1.1×10-4 mol/L.传感器的选择性和稳定性较好,使用3个星期后,仍能保持其初始活性的80%.     

基于静电吸附多层膜固定酶的过氧化氢生物传感器的研究

以玻碳电极为基底,电聚合2,6-吡啶二甲酸(PDC),使形成一带负电的界面,再通过静电吸附自组装一层聚阳离子聚丙烯胺(PAH),用于静电吸附固定辣根过氧化物酶并以此方法固定多层酶膜制备过氧化氢传感器.探讨了工作电位、介体浓度、pH对电极响应的影响,考察了电极的重现性、干扰及使用寿命.该传感器在H₂O₂浓度4.6×10^-6～3.5×10^-3 mol/L范围内有线性响应, 检出限为2×10^-6 mol/L.电极在用于实际试样回收率的测定中,结果良好.     

基于壳聚糖-纳米金/纳米普鲁士蓝/L-半胱氨酸修饰的 葡萄糖传感器的研究

在金电极表面修饰一层L-半胱氨酸,再利用静电吸附作用固定纳米普鲁士蓝(nano-PB),然后利用壳聚糖-纳米金复合膜将葡萄糖氧化酶(GOD)固定于修饰电极表面,制成新型的葡萄糖传感器.通过交流阻抗技术,循环伏安法和计时电流法考察了电极的电化学特性.在优化的实验条件下,该传感器在葡萄糖浓度为3.0×10-6～1.0×10-3 mol/L范围内有线性响应,检测下限为1.6×10-6 mol/L.此外该传感器具有响应快、稳定性好和选择性良好的特点,能有效排除常见干扰物质如抗坏血酸、尿酸等对测定的影响.     

碳纳米管负载铂颗粒酶电极葡萄糖传感器

以碳纳米管负载纳米铂颗粒修饰玻碳电极 (CNT Pt/GCE)为基底 ,用明胶固定葡萄糖氧化酶(GOD) ,构建了电流型葡萄糖生物传感器 (GOD/CNT Pt/GCE)。在实验中 ,GOD/CNT Pt/GCE显示了良好的分析性能 ,与常规铂电极葡萄糖传感器 (GOD/Pt)相比较 ,测定葡萄糖的检出限从 6 .7× 10 -3 mol/L下降到8.3× 10 -4mol/L ;工作电位从 0 .6 5V下降至 0 .4 5V ;响应时间从 30s下降至 5s左右。实验结果表明 ,具有高度电催化活性的CNT Pt/GCE可作为酶传感器的一种新型基体电极。     

基于层层组装镍铝水滑石/聚电解质的无酶葡萄糖传感器

采用共沉淀法合成了镍铝水滑石(NiAl-LDH),将NiAl-LDH与聚苯乙烯磺酸钠(PSS)通过层层自组装法构筑了PSS/NiAl-LDH多层膜电极,并将其用于葡萄糖分析。X射线衍射光谱、红外光谱和SEM结果表明：共沉淀法合成的NiAl-LDH具有典型的水滑石特征峰及形貌。紫外-可见光谱表明：NiAl-LDH可与PSS均匀有效地组装构筑多层膜。电化学研究表明：NiAl-LDH修饰电极能有效地催化氧化葡萄糖。该传感器对葡萄糖在5.0×10-7~6.6×10-4 mol/L范围内呈良好的线性响应,灵敏度为8.9×10-4 A?L?mol-1,检出限(S/N=3)为2.8×10-7 mol/L。     

基于掺杂碳纳米管的复合体系电化学生物传感器研究

制备了含有铂纳米颗粒(NSPt)的壳聚糖(CHIT)和正硅酸四乙酯(TEOS)溶胶-凝胶溶液,将多壁碳纳米管(MWCNTs)分散于制备的CHIT和TEOS溶胶-凝胶混合物体系,并用高倍透射电镜(TEM)和扫描电子显微镜(SEM)对NSPt-CHIT表面和MWCNTs进行了表征。此种复合膜修饰玻碳电极对过氧化氢有灵敏的电化学响应。通过在此复合膜修饰的玻碳电极上固定葡萄糖氧化酶(GOx)制备了葡萄糖生物传感器。该传感器对葡萄糖在0.05~8 mmol/L范围有线性响应,相关系数为0.996,检出限(S/N=3)为10μmol/L。传感器对葡萄糖有灵敏响应,并有很好的重现性和稳定性,应用于实际样品体系的回收试验,结果良好。     

多巴胺在聚硫堇和Nafion双层修饰玻碳电极上的电化学行为

用电化学聚合法在玻碳电极上制备聚硫堇,然后涂渍一层Nafion膜,采用循环伏安法研究其制备和电化学性质。该电极峰电流与多巴胺(DA)在2.00×10-7~1.43×10-3mol/L浓度范围内呈良好的线性关系,检出限为6.67×10-8mol/L,相关系数为0.995。该修饰电极有效排除了抗坏血酸(AA)的干扰。并且具有良好的灵敏度、重现性、稳定性,可用于实际样品中DA的测定。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Copper catalyzed/mediated synthetic methodology for ebselen and related isoselenazolones

Scope of the copper catalyzed/mediated selenium-nitrogen coupling reaction has been studied for the synthesis of isoselenazolones. It is noticed that the 2-chloro, 2-bromo-, and 2-iodo-aryl amides substrates can be exploited in the selenium-nitrogen coupling reaction by employing 25-100 mol % of CuI/1,10-phenanthroline (L) and potassium carbonate as a base in DMF. Furthermore, electron rich 2-chloro-arylamides also underwent selenium-nitrogen coupling reaction to give biologically important selenium-nitrogen heterocycles. Also, copper-catalyzed selenium-nitrogen coupling reaction has been meticulously applied for the synthesis of diaryl diselenides having methoxy, amine, and amide functionality from respective aryl iodides in the presence of stoichiometric amount of succinimide as an external Se-N coupling partner.     

Knoevenagel condensation catalyzed by novel Nmm-based ionic liquids in water

A series of novel N-methyl morpholine (Nmm) based ionic liquids with 1,2-propanediol group were synthesized and used as catalysts for Knoevenagel condensation at room temperature in water. Under the effect of the catalyst, various aldehydes or aliphatic ketones could react with a wide range of activated methylene compounds well, including malononitrile, alkyl cyanoacetate, cyanoacetamide, β-diketone, barbituric acid, 2-arylacetonitrile and thiazolidinedione. Furthermore, most of the products could be separated just by filtrating and washing with water. Additionally, the catalyst is recyclable and applicable for the large-scale synthesis.     

Construction of polyheterocyclic spirotetrahydrothiophene derivatives via sulfa-Michael/aldol cascade reaction

A series of polyheterocyclic spirotetrahydrothiophene derivatives were obtained in moderate to excellent yields via a catalyst-free sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 under mild conditions. We also present the first asymmetric sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 with moderate to good enantioselectivities catalyzed by readily available chiral phase-transfer catalysts (PTCs).     

Suzuki-Miyaura reactions of the soluble guanylate cyclase inhibitor NS2028: a non-product specific route to C-8 substituted analogues

Both soluble guanylate cyclase (sGC) inhibitors ODQ 1 and NS2028 2 are synthesized via improved protocols. In the former case treating 3,4-dihydroquinoxalin-2(1H)-one oxime 8, which can be prepared in two steps from 1,2-benzenediamine, with 1,1′-carbonyldiimidazole (CDI) gives the dihydro-ODQ 10 that in the presence of KMnO₄ oxidises to give ODQ 1 in an overall yield of 46% starting from 1,2-benzenediamine. In the latter case, the synthesis affords NS2028 2 from 2-amino-4-bromophenol 3 in three steps with an overall yield of 85% and avoids the need for chromatography. Furthermore, Suzuki-Miyaura reaction conditions are described that enable the preparation of 8-aryl and 8-heteroaryl derivatives of NS2028 directly from NS2028 2. Finally, demethylation of the 8-(methoxyphenyl) substituted analogues afforded the 8-(hydroxyphenyl) derivatives 40-42. All new products are fully characterised.